From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Add reg-names and power-domain-names for remoteproc ADSP peripheral
loader. Add firmware-name property to distinguish and load different
firmware binaries of various vendors.
Change qcom,halt-regs property phandle to tcsr_1 from tcsr_mutex.
Also add required-opps property and change power domain from LCX to CX,
which is actual PD to be controlled, for setting appropriate
performance state.
This is to make compatible with remoteproc ADSP PIL driver and
latest device tree changes.
Fixes: 8490a99586ab ("dt-bindings: remoteproc: qcom: Add SC7280 ADSP support")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../remoteproc/qcom,sc7280-adsp-pil.yaml | 30 ++++++++++++++++---
1 file changed, 26 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
index 94ca7a0cc203..7addc7de64c0 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
@@ -23,6 +23,11 @@ properties:
- description: qdsp6ss register
- description: efuse q6ss register
+ reg-names:
+ items:
+ - const: qdsp6ss_base
+ - const: lpass_efuse
+
iommus:
items:
- description: Phandle to apps_smmu node with sid mask
@@ -57,7 +62,11 @@ properties:
power-domains:
items:
- - description: LCX power domain
+ - description: CX power domain
+
+ power-domain-names:
+ items:
+ - const: cx
resets:
items:
@@ -73,6 +82,12 @@ properties:
maxItems: 1
description: Reference to the reserved-memory for the Hexagon core
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ The name of the firmware which should be loaded for this remote
+ processor.
+
qcom,halt-regs:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
@@ -80,7 +95,7 @@ properties:
four offsets within syscon for q6, modem, nc and qv6 halt registers.
items:
- items:
- - description: phandle to TCSR_MUTEX registers
+ - description: phandle to TCSR_1 registers
- description: offset to the Q6 halt register
- description: offset to the modem halt register
- description: offset to the nc halt register
@@ -100,6 +115,10 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle
description: Reference to the AOSS side-channel message RAM.
+ required-opps:
+ description:
+ A phandle to an OPP node describing required MMCX performance point.
+
glink-edge:
$ref: qcom,glink-edge.yaml#
type: object
@@ -167,13 +186,16 @@ examples:
<&gcc GCC_CFG_NOC_LPASS_CLK>;
clock-names = "xo", "gcc_cfg_noc_lpass";
- power-domains = <&rpmhpd SC7280_LCX>;
+ power-domains = <&rpmhpd SC7280_CX>;
+ power-domain-names = "cx";
+
+ required-opps = <&rpmhpd_opp_nom>;
resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
<&aoss_reset AOSS_CC_LPASS_RESTART>;
reset-names = "pdc_sync", "cc_lpass";
- qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+ qcom,halt-regs = <&tcsr_1 0x23000 0x25000 0x28000 0x33000>;
memory-region = <&adsp_mem>;
--
2.25.1
