Linux Intel Graphics

• Thread Index

• ✗ Fi.CI.IGT: failure for drm/i915/dp_mst: Fix MST state after a sink reset (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for CCS static load balance (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for series starting with [1/2] drm/ttm: fix kernel-doc typo for @trylock_only
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Increase fastwake sync pulse count as a quirk (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: remove unnecessary display includes
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Disable Redundant HZ Plane expansions for MTL/ARL and DG2
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: remove unused leftover basedie step code (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/hwmon: expose fan speed (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/86] drm/atmel-hdlcd: Run DRM default client setup
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH] drm/i915/gt: Disable Redundant HZ Plane expansions for MTL/ARL and DG2
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm: Use full allocated minor range for DRM (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm: Use full allocated minor range for DRM (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/dp_mst: Fix MST state after a sink reset (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp_mst: Fix MST state after a sink reset (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v7 3/3] drm: Expand max DRM device number to full MINORBITS
  • From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
• [PATCH v7 2/3] accel: Use XArray instead of IDR for minors
  • From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
• [PATCH v7 1/3] drm: Use XArray instead of IDR for minors
  • From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
• [PATCH v7 0/3] drm: Use full allocated minor range for DRM
  • From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
• [PATCH v2] drm/i915/dp_mst: Fix MST state after a sink reset
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for CCS static load balance (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for CCS static load balance (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for CCS static load balance (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/9] drm/panel: panel-novatak-nt35510: Use backlight power constants
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/2] drm/ttm: fix kernel-doc typo for @trylock_only
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/ttm: fix kernel-doc typo for @trylock_only
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: remove unnecessary display includes
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for CCS static load balance
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for CCS static load balance
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for CCS static load balance
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/ttm: fix kernel-doc typo for @trylock_only
  • From: Christian König <christian.koenig@xxxxxxx>
• [PATCH 2/2] drm: ensure drm headers are self-contained and pass kernel-doc
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 1/2] drm/ttm: fix kernel-doc typo for @trylock_only
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Increase fastwake sync pulse count as a quirk (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Increase fastwake sync pulse count as a quirk (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] drm/i915/gem: Remove unnecessary cast
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: remove unnecessary display includes
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 15/15] drm/i915/gt: Allow the user to change the CCS mode through sysfs
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 14/15] drm/i915/gt: Implement creation and removal routines for CCS engines
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 13/15] drm/i915/gt: Isolate single sysfs engine file creation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 12/15] drm/i915: Protect access to the UABI engines list with a mutex
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 11/15] drm/i915/gt: Store active CCS mask
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 10/15] drm/i915/gt: Store engine-related sysfs kobjects
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 09/15] drm/i915/gt: Expose the number of total CCS slices
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 08/15] drm/i915/gt: Remove cslices mask value from the CCS structure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 07/15] drm/i915/gt: Manage CCS engine creation within UABI exposure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 06/15] drm/i915/gt: Introduce for_each_enabled_engine() and apply it in selftests
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 05/15] drm/i915/gem: Mark and verify UABI engine validity
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 04/15] drm/i915/gt: Refactor uabi engine class/instance list creation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 03/15] drm/i915/gt: Allow the creation of multi-mode CCS masks
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 02/15] drm/i915/gt: Move the CCS mode variable to a global position
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 01/15] drm/i915/gt: Avoid using masked workaround for CCS_MODE setting
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 00/15] CCS static load balance
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v3 00/15] CCS static load balance
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v2 2/2] drm/i915/display: Increase Fast Wake Sync length as a quirk
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 1/2] drm/i915/display: Add mechanism to use sink model when applying quirk
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 0/2] Increase fastwake sync pulse count as a quirk
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• Re: [PATCH 10/14] drm/i915/dsb: Introduce intel_dsb_chain()
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 11/14] drm/i915/dsb: Allow intel_dsb_chain() to use DSB_WAIT_FOR_VBLANK
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915: remove unnecessary display includes
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/gt: Disable Redundant HZ Plane expansions for MTL/ARL and DG2
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] drm/i915/display: convert params to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH] drm/i915/gt: Disable Redundant HZ Plane expansions for MTL/ARL and DG2
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• Re: [PATCH 3/7] drm/i915/vblank: convert to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• [PULL] drm-intel-gt-next
  • From: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: remove unused leftover basedie step code (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: remove unused leftover basedie step code (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/i915/display: conversion to struct intel_display
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] drm/i915/dp: Remove double assignment in intel_dp_compute_as_sdp()
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] drm/i915: Implement Dbuf overlap detection feature starting from LNL
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• RE: [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Do not explicilty enable FEC in DP_TP_CTL for UHBR rates
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/hwmon: expose fan speed (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v7] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• RE: [PATCH] drm/i915: remove unused leftover basedie step code
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH 7/7] drm/i915/display: convert params to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 6/7] drm/i915/sprite: convert to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 5/7] drm/i915/tv: convert to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 4/7] drm/i915/vrr: convert to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 3/7] drm/i915/vblank: convert to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 2/7] drm/i915/vblank: fix context imbalance warnings
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 1/7] drm/i915/vblank: use drm_crtc_vblank_crtc() instead of open-coding
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PULL] drm-xe-next
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• Re: [PATCH] drm/i915: ARL requires a newer GSC firmware
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for CCS static load balance (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for CCS static load balance (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for CCS static load balance (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 15/15] drm/i915/gt: Allow the user to change the CCS mode through sysfs
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 14/15] drm/i915/gt: Implement creation and removal routines for CCS engines
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 13/15] drm/i915/gt: Isolate single sysfs engine file creation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 12/15] drm/i915: Protect access to the UABI engines list with a mutex
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 11/15] drm/i915/gt: Store active CCS mask
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 10/15] drm/i915/gt: Store engine-related sysfs kobjects
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 09/15] drm/i915/gt: Expose the number of total CCS slices
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 08/15] drm/i915/gt: Remove cslices mask value from the CCS structure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 07/15] drm/i915/gt: Manage CCS engine creation within UABI exposure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 06/15] drm/i915/gt: Introduce for_each_enabled_engine() and apply it in selftests
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 05/15] drm/i915/gem: Mark and verify UABI engine validity
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 04/15] drm/i915/gt: Refactor uabi engine class/instance list creation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 03/15] drm/i915/gt: Allow the creation of multi-mode CCS masks
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 02/15] drm/i915/gt: Move the CCS mode variable to a global position
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 01/15] drm/i915/gt: Avoid using masked workaround for CCS_MODE setting
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 00/15] CCS static load balance
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: conversion to struct intel_display
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: conversion to struct intel_display
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: conversion to struct intel_display
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 78/86] drm/radeon: Run DRM default client setup
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• [PATCH 7/7] drm/i915/display: convert params to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 6/7] drm/i915/sprite: convert to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 5/7] drm/i915/tv: convert to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 4/7] drm/i915/vrr: convert to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 3/7] drm/i915/vblank: convert to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 2/7] drm/i915/vblank: fix context imbalance warnings
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 1/7] drm/i915/vblank: use drm_crtc_vblank_crtc() instead of open-coding
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 0/7] drm/i915/display: conversion to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: remove unused leftover basedie step code
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: remove unused leftover basedie step code
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PULL] drm-xe-fixes
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH V3] video/aperture: optionally match the device in sysfb_disable()
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH V3] video/aperture: optionally match the device in sysfb_disable()
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH] drm/i915: remove unused leftover basedie step code
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• [PULL] drm-misc-next
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH V3] video/aperture: optionally match the device in sysfb_disable()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• [PATCH] drm/i915: remove unused leftover basedie step code
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v2 65/86] drm/amdgpu: Run DRM default client setup
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH v2 65/86] drm/amdgpu: Run DRM default client setup
  • From: Hamza Mahfooz <hamza.mahfooz@xxxxxxx>
• Re: [PATCH 00/10] drm/i915/display: identify display steppings in display code
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v6] drm/i915/hwmon: expose fan speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PULL] drm-misc-fixes
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 00/10] drm/i915/display: identify display steppings in display code
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH v2] drm/i915: Implement Dbuf overlap detection feature starting from LNL
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• RE: [PATCH 1/5] drm/i915/display: Add support for histogram
  • From: "Kulkarni, Vandita" <vandita.kulkarni@xxxxxxxxx>
• RE: [PATCH 1/5] drm/i915/display: Add support for histogram
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• RE: [PATCH 1/5] drm/i915/display: Add support for histogram
  • From: "Kulkarni, Vandita" <vandita.kulkarni@xxxxxxxxx>
• Re: [PATCH 00/10] drm/i915/display: identify display steppings in display code
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Allow partial memory mapping for cpu memory
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• RE: [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH 0/2] Allow partial memory mapping for cpu memory
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• Re: [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• Re: [PATCH v2 40/86] drm/stm: Run DRM default client setup
  • From: Raphael Gallais-Pou <raphael.gallais-pou@xxxxxxxxxxx>
• Re: [PULL] drm-misc-next
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• Re: [PATCH v6] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Do not explicilty enable FEC in DP_TP_CTL for UHBR rates
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 56/86] drm/mgag200: Run DRM default client setup
  • From: Jocelyn Falempe <jfalempe@xxxxxxxxxx>
• Re: [PATCH v2 51/86] drm/ast: Run DRM default client setup
  • From: Jocelyn Falempe <jfalempe@xxxxxxxxxx>
• RE: [PATCH 1/5] drm/i915/display: Add support for histogram
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• RE: [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• RE: [PATCH] drm/i915: Preserve value of fec_enable calculated before DSC compute config
  • From: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@xxxxxxxxx>
• [PATCH] drm/i915: Do not explicilty enable FEC in DP_TP_CTL for UHBR rates
  • From: Chaitanya Kumar Borah <chaitanya.kumar.borah@xxxxxxxxx>
• [PULL] drm-intel-fixes
  • From: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10
  • From: "Shankar, Uma" <uma.shankar@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Do not attempt to load the GSC multiple times (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/2] drm/i915/psr: Add return bool value for hsw_activate_psr1
  • From: "Shankar, Uma" <uma.shankar@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for video/aperture: optionally match the device in sysfb_disable()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Do not attempt to load the GSC multiple times (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Do not attempt to load the GSC multiple times (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/fourcc: define Intel Xe2 related tile4 ccs modifiers
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH V3] video/aperture: optionally match the device in sysfb_disable()
  • From: Alex Deucher <alexander.deucher@xxxxxxx>
• ✓ Fi.CI.IGT: success for drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 47/86] drm/vc4: Run DRM default client setup
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for CCS static load balance (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 27/86] drm/meson: Run DRM default client setup
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• RE: [PATCH 10/14] drm/i915/dsb: Introduce intel_dsb_chain()
  • From: "Manna, Animesh" <animesh.manna@xxxxxxxxx>
• Re: [PATCH v5] drm/i915/hwmon: expose fan speed
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• RE: [PATCH 11/14] drm/i915/dsb: Allow intel_dsb_chain() to use DSB_WAIT_FOR_VBLANK
  • From: "Manna, Animesh" <animesh.manna@xxxxxxxxx>
• Re: [PATCH v6] drm/i915/hwmon: expose fan speed
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH 05/12] drm/i915: Add some essential functionality for joiners
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• [CI] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/display: identify display steppings in display probe
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm: Provide client setup helper and convert drivers (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/display: Increase Fast Wake Sync length as a quirk
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 1/2] drm/i915/display: Add mechanism to use sink model when applying quirk
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm: Provide client setup helper and convert drivers (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm: Provide client setup helper and convert drivers (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/display: identify display steppings in display probe
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH v2] drm/i915/display: identify display steppings in display probe
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH 05/12] drm/i915: Add some essential functionality for joiners
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for CCS static load balance (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for CCS static load balance (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for CCS static load balance (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/bios: Update new entries in VBT BDB block definitions (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 80/86] drm/i915: Remove struct drm_fb_helper from struct intel_fbdev
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 82/86] drm/i915: Move custom hotplug code into separate callback
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 67/86] drm/hisilicon/hibmc: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 77/86] drm/msm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 86/86] drm/fb-helper: Remove struct drm_fb_helper.fb_probe
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 69/86] drm/nouveau: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 85/86] drm/omapdrm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 73/86] drm/fbdev-ttm: Remove obsolete setup function
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 64/86] drm/fbdev-ttm: Support struct drm_driver.fbdev_probe
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 83/86] drm/{i915,xe}: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 62/86] drm/vkms: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 57/86] drm/ofdrm: Use DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 81/86] drm/i915: Move custom restore code into separate callback
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 61/86] drm/virtgpu: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 78/86] drm/radeon: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 76/86] drm/gma500: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 74/86] drm/armada: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 75/86] drm/exynos-drm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 79/86] drm/tegra: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 70/86] drm/qxl: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 60/86] drm/udl: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 72/86] drm/vmwgfx: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 51/86] drm/ast: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 84/86] drm/omapdrm: Remove struct drm_fb_helper from struct omap_fbdev.
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 49/86] drm/fbdev-dma: Remove obsolete setup function
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 68/86] drm/loongson: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 43/86] drm/tilcdc: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 65/86] drm/amdgpu: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 71/86] drm/vboxvideo: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 63/86] drm/fbdev-shmem: Remove obsolete setup function
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 59/86] drm/solomon: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 66/86] drm/bochs: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 46/86] drm/tve200: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 53/86] drm/gm12u320: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 41/86] drm/sun4i: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 55/86] drm/hyperv_drm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 58/86] drm/simpledrm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 40/86] drm/stm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 56/86] drm/mgag200: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 39/86] drm/sti: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 44/86] drm/st7586: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 54/86] drm/gud: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 38/86] drm/rockchip: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 52/86] drm/cirrus: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 50/86] drm/fbdev-shmem: Support struct drm_driver.fbdev_probe
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 47/86] drm/vc4: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 48/86] drm/xlnx: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 28/86] drm/mi0283qt: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 45/86] drm/st7735r: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 27/86] drm/meson: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 21/86] drm/imx/lcdc: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 20/86] drm/imx/ipuv3: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 36/86] drm/renesas/shmobile: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 32/86] drm/panel-mipi-dbi: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 42/86] drm/tidss: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 23/86] drm/kmb: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 35/86] drm/renesas/rz-du: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 30/86] drm/msxfb: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 34/86] drm/renesas/rcar-du: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 37/86] drm/repaper: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 26/86] drm/mediatek: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 31/86] drm/panel/ili9341: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 17/86] drm/ili9341: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 33/86] drm/pl111: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 29/86] drm/mxsfb/lcdif: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 25/86] drm/mcde: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 22/86] drm/ingenic: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 24/86] drm/logicvc: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 18/86] drm/ili9486: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 19/86] drm/imx/dcss: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 12/86] drm/fsl-dcu: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 11/86] drm/atmel-hdlcd: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 14/86] drm/hx8357d: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 16/86] drm/ili9225: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 10/86] drm/aspeed: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 07/86] drm/arm/komeda: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 15/86] drm/ili9163: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 06/86] drm/arcgpu: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 08/86] drm/arm/hdlcd: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 05/86] drm/fbdev-dma: Support struct drm_driver.fbdev_probe
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 13/86] drm/hisilicon/kirin: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 04/86] drm: Add client-agnostic setup helper
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 09/86] drm/arm/malidp: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 03/86] drm/fbdev: Add memory-agnostic fbdev client
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 01/86] drm/fbdev-helper: Move color-mode lookup into 4CC format helper
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 00/86] drm: Provide client setup helper and convert drivers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 02/86] drm/fbdev-helper: Set and clear VGA switcheroo client from fb_info
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v1 14/14] drm/i915/gt: Allow the user to change the CCS mode through sysfs
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 13/14] drm/i915/gt: Implement creation and removal routines for CCS engines
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 12/14] drm/i915/gt: Isolate single sysfs engine file creation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 11/14] drm/i915/gt: Store active CCS mask
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 10/14] drm/i915/gt: Store engine-related sysfs kobjects
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 09/14] drm/i915/gt: Expose the number of total CCS slices
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 08/14] drm/i915/gt: Remove cslices mask value from the CCS structure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 07/14] drm/i915/gt: Manage CCS engine creation within UABI exposure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 06/14] drm/i915/gt: Introduce for_each_enabled_engine() and apply it in selftests
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 05/14] drm/i915/gem: Mark and verify UABI engine validity
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 04/14] drm/i915/gt: Refactor uabi engine class/instance list creation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 03/14] drm/i915/gt: Allow the creation of multi-mode CCS masks
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 02/14] drm/i915/gt: Move the CCS mode variable to a global position
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 01/14] drm/i915/gt: Avoid using masked workaround for CCS_MODE setting
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v1 00/14] CCS static load balance
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: identify display steppings in display code (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [v3] drm/i915/bios: Update new entries in VBT BDB block definitions
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Display Global Histogram (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Display Global Histogram (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: identify display steppings in display code (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: identify display steppings in display code (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: identify display steppings in display code (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCHv2 5/5] drm/i915/display/histogram: Histogram changes for Display LNL+
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv2 1/5] drm/i915/display: Add support for histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv2 4/5] drm/i915/histogram: histogram delay counter doesnt reset
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv2 3/5] Add crtc properties for global histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv2 2/5] drm/i915/display: histogram interrupt handling
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCHv2 0/5] Display Global histogram
  • From: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
• [PATCH v2] drm/i915/display: identify display steppings in display probe
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• RE: [v2] drm/i915/bios: Update new entries in VBT BDB block definitions
  • From: "Kandpal, Suraj" <suraj.kandpal@xxxxxxxxx>
• Re: [PATCH 07/10] drm/i915/display: identify display steppings in display probe
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 2/2] drm/xe/display: drop unused rawclk_freq and RUNTIME_INFO()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Do not attempt to load the GSC multiple times
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for Increase fastwake sync pulse count as a quirk
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915 & drm/xe: rawclk freq cleanups
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/10] drm/i915: remove display stepping handling
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH 10/10] drm/xe: remove display stepping handling
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/ci: increase timeout for all jobs
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/10] drm/i915: remove display stepping handling
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH] drm/i915: Do not attempt to load the GSC multiple times
  • From: Daniele Ceraolo Spurio <daniele.ceraolospurio@xxxxxxxxx>
• Re: [PATCH 08/10] drm/i915/display: switch to display detected steppings
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH 07/10] drm/i915/display: identify display steppings in display probe
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH V2] video/aperture: match the pci device when calling sysfb_disable()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 06/10] drm/i915/display: rename IS_DISPLAY_IP_STEP() to IS_DISPLAY_VER_STEP()
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH 05/10] drm/i915/display: rename IS_DISPLAY_IP_RANGE() to IS_DISPLAY_VER_FULL()
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Do not attempt to load the GSC multiple times
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Do not attempt to load the GSC multiple times
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 04/10] drm/xe/step: define more steppings E-J
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH 03/10] drm/xe/display: remove the unused compat HAS_GMD_ID()
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH 02/10] drm/xe/display: remove intel_display_step_name() to simplify
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drivers:gt:Switch to use kmemdup_array()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/10] drm/xe/display: fix compat IS_DISPLAY_STEP() range end
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• RE: [PATCH] drm/i915: Do not attempt to load the GSC multiple times
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• [PATCH] drm/i915: Do not attempt to load the GSC multiple times
  • From: Daniele Ceraolo Spurio <daniele.ceraolospurio@xxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1] drivers:gt:Switch to use kmemdup_array()
  • From: Yu Jiaoliang <yujiaoliang@xxxxxxxx>
• [PATCH v2] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation
  • From: Yu Jiaoliang <yujiaoliang@xxxxxxxx>
• RE: [PATCH 35/86] drm/renesas/rz-du: Run DRM default client setup
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 2/2] drm/doc: Document that userspace should utilize CRTCs bottom up
  • From: Simon Ser <contact@xxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/display: identify display steppings in display code
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/10] drm/xe/display: fix compat IS_DISPLAY_STEP() range end
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: identify display steppings in display code
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: identify display steppings in display code
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 10/10] drm/xe: remove display stepping handling
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 09/10] drm/i915: remove display stepping handling
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 08/10] drm/i915/display: switch to display detected steppings
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 07/10] drm/i915/display: identify display steppings in display probe
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 06/10] drm/i915/display: rename IS_DISPLAY_IP_STEP() to IS_DISPLAY_VER_STEP()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 05/10] drm/i915/display: rename IS_DISPLAY_IP_RANGE() to IS_DISPLAY_VER_FULL()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 04/10] drm/xe/step: define more steppings E-J
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 03/10] drm/xe/display: remove the unused compat HAS_GMD_ID()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 02/10] drm/xe/display: remove intel_display_step_name() to simplify
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 01/10] drm/xe/display: fix compat IS_DISPLAY_STEP() range end
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 00/10] drm/i915/display: identify display steppings in display code
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Increase fastwake sync pulse count as a quirk
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Increase fastwake sync pulse count as a quirk
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] drm/i915/display: Increase Fast Wake Sync length as a quirk
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH 1/2] drm/i915/display: Add mechanism to use sink model when applying quirk
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH 0/2] Increase fastwake sync pulse count as a quirk
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• Re: [PATCH 2/2] drm/xe/display: drop unused rawclk_freq and RUNTIME_INFO()
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Re: [PATCH v6] drm/i915/hwmon: expose fan speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v6] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH v2] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• Re: [82/86] drm/i915: Move custom hotplug code into separate callback
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• ✓ Fi.CI.IGT: success for drm/i915/hwmon: expose fan speed (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 40/86] drm/stm: Run DRM default client setup
  • From: Raphael Gallais-Pou <raphael.gallais-pou@xxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/i915/pps: Disable DPLS_GATING around pps sequence (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [82/86] drm/i915: Move custom hotplug code into separate callback
  • From: Sui Jingfeng <sui.jingfeng@xxxxxxxxx>
• RE: ✗ Fi.CI.IGT: failure for drm/i915/gt: remove stray declaration of intel_gt_release_all()
  • From: "Illipilli, TejasreeX" <tejasreex.illipilli@xxxxxxxxx>
• Re: [PATCH v6] drm/i915/hwmon: expose fan speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: platform identification with display->is.<PLATFORM> (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915 & drm/xe: rawclk freq cleanups
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915 & drm/xe: rawclk freq cleanups
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] drm/xe/display: drop unused rawclk_freq and RUNTIME_INFO()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 1/2] drm/i915: move rawclk from runtime to display runtime info
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 0/2] drm/i915 & drm/xe: rawclk freq cleanups
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/i915/gt: remove stray declaration of intel_gt_release_all()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 54/86] drm/gud: Run DRM default client setup
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 37/86] drm/repaper: Run DRM default client setup
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 32/86] drm/panel-mipi-dbi: Run DRM default client setup
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 28/86] drm/mi0283qt: Run DRM default client setup
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH v1] drivers:gt:Switch to use kmemdup_array()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] drivers:gt:Switch to use kmemdup_array()
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 04/86] drm: Add client-agnostic setup helper
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 48/86] drm/xlnx: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• ✓ Fi.CI.BAT: success for drm/ci: increase timeout for all jobs
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 04/86] drm: Add client-agnostic setup helper
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [82/86] drm/i915: Move custom hotplug code into separate callback
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 31/86] drm/panel/ili9341: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 28/86] drm/mi0283qt: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 04/86] drm: Add client-agnostic setup helper
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v1] drm/ci: increase timeout for all jobs
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Continue creating engine sysfs files even after a failure
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/hwmon: expose fan speed (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v6] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: platform identification with display->is.<PLATFORM> (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: platform identification with display->is.<PLATFORM> (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: platform identification with display->is.<PLATFORM> (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3] drm/i915/display: add platforms "is" member to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 9/9] drm/i915/bios: use display->is.PLATFORM instead of IS_PLATFORM()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 8/9] drm/i915/display: keep subplatforms next to their platforms
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 7/9] drm/i915/display: consider HSW/BDW ULX to also be ULT
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 6/9] drm/i915/display: remove the display platform enum as unnecessary
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 5/9] drm/i915/display: add platforms "is" member to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 4/9] drm/i915/display: add display platforms structure with platform members
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 3/9] drm/i915/display: join the platform and subplatform enums
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 2/9] drm/i915/display: use a macro to define platform enumerations
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 1/9] drm/i915/display: use a macro to initialize subplatforms
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 0/9] drm/i915/display: platform identification with display->is.<PLATFORM>
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for video/aperture: match the pci device when calling sysfb_disable() (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] video/aperture: match the pci device when calling sysfb_disable()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH V2] video/aperture: match the pci device when calling sysfb_disable()
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH v2 0/2] Allow partial memory mapping for cpu memory
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• [PATCH V2] video/aperture: match the pci device when calling sysfb_disable()
  • From: Alex Deucher <alexander.deucher@xxxxxxx>
• Re: [PATCH 59/86] drm/solomon: Run DRM default client setup
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 58/86] drm/simpledrm: Run DRM default client setup
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 57/86] drm/ofdrm: Use DRM default client setup
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 31/86] drm/panel/ili9341: Run DRM default client setup
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 31/86] drm/panel/ili9341: Run DRM default client setup
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 0/2] Allow partial memory mapping for cpu memory
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Allow partial memory mapping for cpu memory
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] video/aperture: match the pci device when calling sysfb_disable()
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 0/2] Allow partial memory mapping for cpu memory
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• Re: [PATCH] video/aperture: match the pci device when calling sysfb_disable()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• RE: [PATCH] drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled
  • From: "Kahola, Mika" <mika.kahola@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/gt: Continue creating engine sysfs files even after a failure
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• RE: [PATCH v10] drm/i915: WA context support for L3flush
  • From: "Gote, Nitin R" <nitin.r.gote@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• Re: [68/86] drm/loongson: Run DRM default client setup
  • From: Sui Jingfeng <sui.jingfeng@xxxxxxxxx>
• Re: [82/86] drm/i915: Move custom hotplug code into separate callback
  • From: Sui Jingfeng <sui.jingfeng@xxxxxxxxx>
• Re: [PATCH] video/aperture: match the pci device when calling sysfb_disable()
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH 48/86] drm/xlnx: Run DRM default client setup
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 36/86] drm/renesas/shmobile: Run DRM default client setup
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 34/86] drm/renesas/rcar-du: Run DRM default client setup
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 04/86] drm: Add client-agnostic setup helper
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/86] drm/fbdev-helper: Move color-mode lookup into 4CC format helper
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 25/86] drm/mcde: Run DRM default client setup
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 46/86] drm/tve200: Run DRM default client setup
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for CCS static load balance (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for CCS static load balance (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for CCS static load balance (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 22/86] drm/ingenic: Run DRM default client setup
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 11/11] drm/i915/gt: Allow the user to change the CCS mode through sysfs
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 10/11] drm/i915/gt: Implement creation and removal routines for CCS engines
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 09/11] drm/i915/gt: Isolate single sysfs engine file creation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 08/11] drm/i915/gt: Store active CCS mask
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 07/11] drm/i915/gt: Store engine-related sysfs kobjects
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 06/11] drm/i915/gt: Expose the number of total CCS slices
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 05/11] drm/i915/gt: Remove cslices mask value from the CCS structure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 04/11] drm/i915/gt: Manage CCS engine creation within UABI exposure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 03/11] drm/i915/gt: Refactor uabi engine class/instance list creation
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 02/11] drm/i915/gt: Allow the creation of multi-mode CCS masks
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 01/11] drm/i915/gt: Move the CCS mode variable to a global position
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 00/11] CCS static load balance
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH 83/86] drm/{i915,xe}: Run DRM default client setup
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] drm: use mem_is_zero() instead of !memchr_inv(s, 0, n)
  • From: Kees Cook <kees@xxxxxxxxxx>
• Re: [PATCH 69/86] drm/nouveau: Run DRM default client setup
  • From: Danilo Krummrich <dakr@xxxxxxxxxx>
• Re: [PATCH v2 1/2] string: add mem_is_zero() helper to check if memory area is all zeros
  • From: Kees Cook <kees@xxxxxxxxxx>
• Re: [PATCH 55/86] drm/hyperv_drm: Run DRM default client setup
  • From: Deepak Rawat <drawat.floss@xxxxxxxxx>
• Re: [PATCH 83/86] drm/{i915,xe}: Run DRM default client setup
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] drm/i915/gt: remove stray declaration of intel_gt_release_all()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/gt: remove stray declaration of intel_gt_release_all()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v10] drm/i915: WA context support for L3flush
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/3] drm/fourcc: define Intel Xe2 related tile4 ccs modifiers
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• Re: [PATCH] video/aperture: match the pci device when calling sysfb_disable()
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH 28/86] drm/mi0283qt: Run DRM default client setup
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm: Provide client setup helper and convert drivers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm: Provide client setup helper and convert drivers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm: Provide client setup helper and convert drivers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/86] drm/arm/malidp: Run DRM default client setup
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• Re: [PATCH 08/86] drm/arm/hdlcd: Run DRM default client setup
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• Re: [PATCH 07/86] drm/arm/komeda: Run DRM default client setup
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• Re: [PATCH 38/86] drm/rockchip: Run DRM default client setup
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 83/86] drm/{i915,xe}: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 83/86] drm/{i915,xe}: Run DRM default client setup
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] drm: use mem_is_zero() instead of !memchr_inv(s, 0, n)
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for Introducing Xe2 ccs modifiers for integrated and discrete graphics
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 86/86] drm/fb-helper: Remove struct drm_fb_helper.fb_probe
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 79/86] drm/tegra: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 81/86] drm/i915: Move custom restore code into separate callback
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 85/86] drm/omapdrm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 83/86] drm/{i915,xe}: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 84/86] drm/omapdrm: Remove struct drm_fb_helper from struct omap_fbdev.
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 77/86] drm/msm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 80/86] drm/i915: Remove struct drm_fb_helper from struct intel_fbdev
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 65/86] drm/amdgpu: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 78/86] drm/radeon: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 82/86] drm/i915: Move custom hotplug code into separate callback
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 58/86] drm/simpledrm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 57/86] drm/ofdrm: Use DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 74/86] drm/armada: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 66/86] drm/bochs: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 44/86] drm/st7586: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 75/86] drm/exynos-drm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 64/86] drm/fbdev-ttm: Support struct drm_driver.fbdev_probe
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 42/86] drm/tidss: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 62/86] drm/vkms: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 73/86] drm/fbdev-ttm: Remove obsolete setup function
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 69/86] drm/nouveau: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 68/86] drm/loongson: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 76/86] drm/gma500: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 72/86] drm/vmwgfx: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 71/86] drm/vboxvideo: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 63/86] drm/fbdev-shmem: Remove obsolete setup function
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 60/86] drm/udl: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 70/86] drm/qxl: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 61/86] drm/virtgpu: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 55/86] drm/hyperv_drm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 67/86] drm/hisilicon/hibmc: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 59/86] drm/solomon: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 49/86] drm/fbdev-dma: Remove obsolete setup function
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 54/86] drm/gud: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 48/86] drm/xlnx: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 46/86] drm/tve200: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 56/86] drm/mgag200: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 39/86] drm/sti: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 53/86] drm/gm12u320: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 47/86] drm/vc4: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 50/86] drm/fbdev-shmem: Support struct drm_driver.fbdev_probe
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 52/86] drm/cirrus: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 51/86] drm/ast: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 41/86] drm/sun4i: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 40/86] drm/stm: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 45/86] drm/st7735r: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 32/86] drm/panel-mipi-dbi: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 43/86] drm/tilcdc: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 36/86] drm/renesas/shmobile: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 33/86] drm/pl111: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 37/86] drm/repaper: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 34/86] drm/renesas/rcar-du: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 38/86] drm/rockchip: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 31/86] drm/panel/ili9341: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 27/86] drm/meson: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 35/86] drm/renesas/rz-du: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 25/86] drm/mcde: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 24/86] drm/logicvc: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 18/86] drm/ili9486: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 28/86] drm/mi0283qt: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 22/86] drm/ingenic: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 30/86] drm/msxfb: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 20/86] drm/imx/ipuv3: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 29/86] drm/mxsfb/lcdif: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 21/86] drm/imx/lcdc: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 19/86] drm/imx/dcss: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 26/86] drm/mediatek: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 23/86] drm/kmb: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 16/86] drm/ili9225: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 17/86] drm/ili9341: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 14/86] drm/hx8357d: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 13/86] drm/hisilicon/kirin: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 15/86] drm/ili9163: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 12/86] drm/fsl-dcu: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 04/86] drm: Add client-agnostic setup helper
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 10/86] drm/aspeed: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 07/86] drm/arm/komeda: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 09/86] drm/arm/malidp: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 05/86] drm/fbdev-dma: Support struct drm_driver.fbdev_probe
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 08/86] drm/arm/hdlcd: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 11/86] drm/atmel-hdlcd: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 00/86] drm: Provide client setup helper and convert drivers
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 06/86] drm/arcgpu: Run DRM default client setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 02/86] drm/fbdev-helper: Set and clear VGA switcheroo client from fb_info
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 01/86] drm/fbdev-helper: Move color-mode lookup into 4CC format helper
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 03/86] drm/fbdev: Add memory-agnostic fbdev client
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 1/5] drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2
  • From: kernel test robot <lkp@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Introducing Xe2 ccs modifiers for integrated and discrete graphics
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Introducing Xe2 ccs modifiers for integrated and discrete graphics
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] drm/i915/display: allow creation of Xe2 ccs framebuffers
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• [PATCH 2/3] drm/fourcc: define Intel Xe2 related tile4 ccs modifiers
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• [PATCH 1/3] drm/i915/display: Don't enable decompression on Xe2 with Tile4
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• [PATCH 0/3] Introducing Xe2 ccs modifiers for integrated and discrete graphics
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• Re: [PATCH] drm/i915: make intel_display_power_domain_str() static
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PULL] drm-misc-next
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 05/12] drm/i915: Add some essential functionality for joiners
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH] drm/i915/gem: Remove unnecessary cast
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: make intel_display_power_domain_str() static
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Allow partial memory mapping for cpu memory (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/gem: Remove unnecessary cast (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] drm/i915/hti: convert to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 6/7] drm/i915/display: convert dp aux backlight to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 5/7] drm/i915/lspcon: convert to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 4/7] drm/i915/alpm: convert to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 3/7] drm/i915/display: convert intel_load_detect.c to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 3/7] drm/i915/display: convert intel_load_detect.c to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 3/7] drm/i915/display: convert intel_load_detect.c to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 2/7] drm/i915/display: convert intel_link_bw.c to struct intel_display
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] drm/i915/gem: Remove unnecessary cast
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] drm/i915/guc: Change GEM_WARN_ON to guc_err to prevent taints in CI
  • From: "Narvaez, Jesus" <jesus.narvaez@xxxxxxxxx>
• [PULL] drm-xe-fixes
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: linux-next: manual merge of the drm-xe tree with the drm-intel tree
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• Re: [PATCH] drm/i915: make intel_display_power_domain_str() static
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PULL] drm-misc-fixes
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: make intel_display_power_domain_str() static
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: make intel_display_power_domain_str() static
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND 2/2] drm/edid: make drm_edid_block_valid() static
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drm/i915: make __intel_display_power_is_enabled() static
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH] drm/i915: make intel_display_power_domain_str() static
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: A huge warning in dmesg pointing to drivers/gpu/drm/i915/display/intel_tc.c
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: A huge warning in dmesg pointing to drivers/gpu/drm/i915/display/intel_tc.c
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 9/9] drm/tilcdc: Use backlight power constants
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 9/9] drm/tilcdc: Use backlight power constants
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH 9/9] drm/tilcdc: Use backlight power constants
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• linux-next: manual merge of the drm-xe tree with the drm-intel tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Allow partial memory mapping for cpu memory (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/gem: Remove unnecessary cast (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/4] drm: Use full allocated minor range for DRM
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/gem: Remove unnecessary cast
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Allow partial memory mapping for cpu memory
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/gem: Remove unnecessary cast
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/bios: Update new entries in VBT BDB block definitions
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/i915/hdcp: Use correct cp_irq_count (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Allow partial memory mapping for cpu memory
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for series starting with [v2,1/2] string: add mem_is_zero() helper to check if memory area is all zeros
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/i915/hdcp: Use correct cp_irq_count (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/bios: Update new entries in VBT BDB block definations
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• [v2] drm/i915/bios: Update new entries in VBT BDB block definitions
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Allow partial memory mapping for cpu memory
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Allow partial memory mapping for cpu memory
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] drm/i915/gem: Do not look for the exact address in node
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] drm/i915/gem: Calculate object page offset for partial memory mapping
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] Allow partial memory mapping for cpu memory
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] drm/i915/gem: Do not look for the exact address in node
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] Allow partial memory mapping for cpu memory
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] drm/i915/gem: Calculate object page offset for partial memory mapping
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] Allow partial memory mapping for cpu memory
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for series starting with [1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/pps: Disable DPLS_GATING around pps sequence
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• Re: [PATCH v2 1/2] string: add mem_is_zero() helper to check if memory area is all zeros
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drm/i915: make __intel_display_power_is_enabled() static
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v10] drm/i915: WA context support for L3flush
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [v2,1/2] string: add mem_is_zero() helper to check if memory area is all zeros
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for series starting with [v2,1/2] string: add mem_is_zero() helper to check if memory area is all zeros
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] drm: use mem_is_zero() instead of !memchr_inv(s, 0, n)
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 1/2] string: add mem_is_zero() helper to check if memory area is all zeros
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915/gt: remove stray declaration of intel_gt_release_all()
  • From: "Coelho, Luciano" <luciano.coelho@xxxxxxxxx>
• RE: [PATCH] drm/i915: Preserve value of fec_enable calculated before DSC compute config
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: "Nilawar, Badal" <badal.nilawar@xxxxxxxxx>
• Re: [RFC PATCH] dma-buf/dma-fence: Use a successful read_trylock() annotation for dma_fence_begin_signalling()
  • From: Thomas Hellström <thomas.hellstrom@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH] dma-buf/dma-fence: Use a successful read_trylock() annotation for dma_fence_begin_signalling()
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• Re: [PATCH] drm/i915/hdcp: Use correct cp_irq_count
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH v6 0/4] drm: Use full allocated minor range for DRM
  • From: James Zhu <jamesz@xxxxxxx>
• Re: [PATCH v6 0/4] drm: Use full allocated minor range for DRM
  • From: James Zhu <jamesz@xxxxxxx>
• Re: [RESEND 1/2] drm/i915/gvt: stop using drm_edid_block_valid()
  • From: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Allow partial memory mapping for cpu memory
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: make __intel_display_power_is_enabled() static
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/4] drm: Use full allocated minor range for DRM
  • From: Michał Winiarski <michal.winiarski@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/gt: remove stray declaration of intel_gt_release_all()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/gt: remove stray declaration of intel_gt_release_all()
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• XDC 2024: Call for Proposals deadline extended to August 19
  • From: Mark Filion <mark.filion@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] Allow partial memory mapping for cpu memory
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for series starting with [1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PULL] drm-intel-next
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: make __intel_display_power_is_enabled() static
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 7/7] drm/i915/hti: convert to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 6/7] drm/i915/display: convert dp aux backlight to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 5/7] drm/i915/lspcon: convert to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 4/7] drm/i915/alpm: convert to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 3/7] drm/i915/display: convert intel_load_detect.c to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 2/7] drm/i915/display: convert intel_link_bw.c to struct intel_display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: make __intel_display_power_is_enabled() static
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915: make __intel_display_power_is_enabled() static
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/gt: remove stray declaration of intel_gt_release_all()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: remove stray declaration of intel_gt_release_all()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Allow partial memory mapping for cpu memory
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH] drm/i915/gt: remove stray declaration of intel_gt_release_all()
  • From: Luca Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: WA context support for L3flush
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/pps: Disable DPLS_GATING around pps sequence (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH v5] drm/i915/hwmon: expose fan speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Add HDMI PLL Algorithm for SNPS/C10PHY (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/display: Call panel_fitting from pipe_config
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: WA context support for L3flush
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: WA context support for L3flush
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: WA context support for L3flush
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/xe: Name and document Wa_14019789679
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v10] drm/i915: WA context support for L3flush
  • From: Nitin Gote <nitin.r.gote@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for series starting with [RESEND,1/2] drm/i915/gvt: stop using drm_edid_block_valid()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Fix NULL ptr deref in intel_async_flip_check_uapi()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] drm/i915/hwmon: expose fan speed
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Explicitly cast divisor and use div_u64() (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915/bios: Update new entries in VBT BDB block definations
  • From: "Bhadane, Dnyaneshwar" <dnyaneshwar.bhadane@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/pps: Disable DPLS_GATING around pps sequence (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/display: Call panel_fitting from pipe_config
  • From: "Nautiyal, Ankit K" <ankit.k.nautiyal@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/bios: Update new entries in VBT BDB block definations
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/pps: Disable DPLS_GATING around pps sequence
  • From: Suraj Kandpal <suraj.kandpal@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Add HDMI PLL Algorithm for SNPS/C10PHY (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Add HDMI PLL Algorithm for SNPS/C10PHY (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Add HDMI PLL Algorithm for SNPS/C10PHY (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] drm/i915/cx0_phy: Use HDMI PLL algorithm for C10 PHY
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 4/5] drm/i915/intel_snps_hdmi_pll: Compute C10 HDMI PLLs with algorithm
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 3/5] drm/i915/cx0_phy_regs: Add C10 registers bits
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 2/5] drm/i915/snps_phy: Use HDMI PLL algorithm for DG2
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 0/5] Add HDMI PLL Algorithm for SNPS/C10PHY
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 1/5] drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH 0/2] Allow partial memory mapping for cpu memory
  • From: Matthew Brost <matthew.brost@xxxxxxxxx>
• Re: [PATCH v5] drm/i915/hwmon: expose fan speed
  • From: kernel test robot <lkp@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for series starting with [RESEND,1/3] drm/mst: switch to guid_t type for GUID
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/xe/display: Change HPD to polling on runtime suspend (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/i915/hwmon: expose fan speed (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] drm/i915/hwmon: expose fan speed
  • From: kernel test robot <lkp@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/xe: Name and document Wa_14019789679
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/xe: Name and document Wa_14019789679
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• [PATCH] drm/xe: Name and document Wa_14019789679
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH v6 0/4] drm: Use full allocated minor range for DRM
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH v2 04/10] drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [RESEND,1/2] drm/i915/gvt: stop using drm_edid_block_valid()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Fix NULL ptr deref in intel_async_flip_check_uapi()
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Explicitly cast divisor and use div_u64() (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/bios: Update new entries in VBT BDB block definations
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Allow partial memory mapping for cpu memory
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [RESEND,1/3] drm/mst: switch to guid_t type for GUID
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [RESEND 2/2] drm/edid: make drm_edid_block_valid() static
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [RESEND 1/2] drm/i915/gvt: stop using drm_edid_block_valid()
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drm/i915/bios: Update new entries in VBT BDB block definations
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for series starting with [RESEND,1/3] drm/mst: switch to guid_t type for GUID
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915: Fix NULL ptr deref in intel_async_flip_check_uapi()
  • From: Ma Ke <make24@xxxxxxxxxxx>
• Re: [PATCH v9 0/6] drm/ci: Add support for GPU and display testing
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: [linux-next:master] [fs] cdc4ad36a8: kernel_BUG_at_include/linux/page-flags.h
  • From: Ryan Roberts <ryan.roberts@xxxxxxx>
• [PATCH v3] drm/i915: Explicitly cast divisor and use div_u64()
  • From: Thorsten Blum <thorsten.blum@xxxxxxxxxx>
• Re: [PATCH v5] drm/i915/hwmon: expose fan speed
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915/bios: Update new entries in VBT BDB block definations
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• Re: [PATCH v5] drm/i915/hwmon: expose fan speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH] drm/i915: Preserve value of fec_enable calculated before DSC compute config
  • From: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@xxxxxxxxx>
• Re: [PATCH v2 0/2] Fix mmap memory boundary calculation
  • From: Jann Horn <jannh@xxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/xe/display: Change HPD to polling on runtime suspend (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [RESEND 3/3] drm/amd/display: switch to guid_gen() to generate valid GUIDs
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [RESEND 2/3] drm/mst: switch to guid_gen() to generate valid GUIDs
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [RESEND 1/3] drm/mst: switch to guid_t type for GUID
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] video/aperture: match the pci device when calling sysfb_disable()
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>