U-Boot V2 Development (Barebox)
Thread Index
[
Prev Page
][
Next Page
]
[PATCH] serial: ns16550: Remove unused fields from NS16550_plat structure
From
: Alexander Shiyan <shc_work@xxxxxxx>
[PATCH] treewide: Reuse init_clock() return value for clocksource drivers
From
: Alexander Shiyan <shc_work@xxxxxxx>
[PATCH] Documentation: dts: add missed Ingenic Semiconductor vendor prefix
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH] ARM: atmel: add sama5d4 xplained ultra board support
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH 1/2] net: phy: micrel: Add OF conf. support for ksz9031
From
: Wadim Egorov <w.egorov@xxxxxxxxx>
[PATCH 2/2] net: cpsw: Set phy device_node pointer in probe
From
: Wadim Egorov <w.egorov@xxxxxxxxx>
Re: [PATCH 0/3] fixes and sanity checks for mxs pinmuxing
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 2/3] mxs: iomux-imx23/imx28: unify mode definition
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
Re: [PATCH 2/3] mxs: iomux-imx23/imx28: unify mode definition
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH 0/3] fixes and sanity checks for mxs pinmuxing
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
Re: [PATCH 2/3] mxs: iomux-imx23/imx28: unify mode definition
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 2/2] Add xz decompression support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/2] filetype: Add XZ filetype support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 2/3] mxs: iomux-imx23/imx28: unify mode definition
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH 1/3] mxs: iomux-imx28: Fix keeper/pullup/drive strength/voltage flags
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH 0/3] fixes and sanity checks for mxs pinmuxing
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH 3/3] mxs: iomux-imx23/imx28: add additional checks on mode
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH] saveenv: Fix saving to specified file
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] ARM: imx23-olinuxino: discover usb before ifup
From
: Dmitry Voytik <voytikd@xxxxxxxxx>
Re: [PATCH] lib: parameter: fixed doku renamed ip -> ipaddr
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] EFI: report correct block device size
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 2/2] ARM i.MX6: mmdc: move calibration result printout to separate function
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/2] ARM i.MX6: mmdc: Only print calibration values of enabled phys
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] include/environment.h: Add missing include
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] EFI: report correct block device size
From
: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
Re: LPC43xx
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: LPC43xx
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
LPC43xx
From
: Alexander Shiyan <shc_work@xxxxxxx>
Re: [PATCH 1/2] reset_source: add thermal reset
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 5/7] sha2: fix invalid length check
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 1/7] imx: ipu-v3: fix typo leading to build warning
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] usb: ehci-hcd: Correct CLEAR_FEATURE code
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 6/7] i2c: at91: fix invalid length check
From
: Bo Shen <voice.shen@xxxxxxxxx>
Re: [PATCH 4/7] arm: at91: remove unused variable
From
: Bo Shen <voice.shen@xxxxxxxxx>
Re: [PATCH 5/7] sha2: fix invalid length check
From
: Alexander Aring <alex.aring@xxxxxxxxx>
[PATCH 6/7] i2c: at91: fix invalid length check
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 7/7] clk: gate: remove superfluous code
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 4/7] arm: at91: remove unused variable
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 5/7] sha2: fix invalid length check
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 2/7] dfu: fix possible usage of uninitialized var
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 3/7] arm: boards: variscite-mx6: check i2c return value
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 1/7] imx: ipu-v3: fix typo leading to build warning
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 1/2] reset_source: add thermal reset
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 2/2] tegra: pmc: add support for reset src detection
From
: Lucas Stach <dev@xxxxxxxxxx>
Re: [PATCH] fixup! Update .mailmap using scripts/mailmapper
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] fixup! Update .mailmap using scripts/mailmapper
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: [PATCH] fixup! Update .mailmap using scripts/mailmapper
From
: Nishanth Menon <nm@xxxxxx>
[PATCH] usb: ehci-hcd: Correct CLEAR_FEATURE code
From
: Dmitry Voytik <voytikd@xxxxxxxxx>
[PATCH] fixup! Update .mailmap using scripts/mailmapper
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 3/3] Update .mailmap using scripts/mailmapper
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 2/3] scripts: add mailmapper, a tool to create/update mailmap file
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 0/3] Add .mailmap file and a tool to maintain it
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 1/3] add .mailmap for proper git-shortlog output
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: [PATCH 1/6] ARM: defconfig: Enable of_display_timings in am335x_defconfig
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
RE: AM335x mehrere MMC-Bootquellen
From
: "Gieseler, Christian" <CG@xxxxxxxxxxxx>
AM335x mehrere MMC-Bootquellen
From
: Matthias Feser <m.feser@xxxxxxxxxxx>
[PATCH] lib: parameter: fixed doku renamed ip -> ipaddr
From
: Rolf Evers-Fischer <embedded24@xxxxxxxxxxxxxxxx>
Re: Wrong relocation with Mini2440
From
: luigi origa <luigi.origa@xxxxxxxxx>
[PATCH 6/6] phyCORE-AM335x: Add barebox image without SPI NOR
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 5/6] ARM: dts: split phyCORE-AM335x device tree
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 3/6] phyCORE-AM335x: Update default enviroment
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 4/6] phyCORE-AM335x: Strip down device tree
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 1/6] ARM: defconfig: Enable of_display_timings in am335x_defconfig
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 2/6] net: cpsw: Fix probe for one port ethernet
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
Re: [PATCH 0/2] mips: qemu-malta: add little-endian mode support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: Wrong relocation with Mini2440
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 0/2] mips: qemu-malta: add little-endian mode support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] commands: firmwareload: add CMD_GROUP
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Wrong relocation with Mini2440
From
: luigi origa <luigi.origa@xxxxxxxxx>
[PATCH 1/2] mips: qemu-malta: add little-endian mode support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 2/2] Documentation: mips: add little-endian qemu-malta HOWTO
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 0/2] mips: qemu-malta: add little-endian mode support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH] commands: firmwareload: add CMD_GROUP
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
Re: [PATCH 6/6] commands: implement 'diff' command
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 6/6] commands: implement 'diff' command
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 1/4] firmware: Add missing include
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 4/4] firmware: altera_serial: fix dev_dbg format
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 3/4] firmware: altera_serial: gpio_set_value returns void
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 2/4] firmware: Let SoCFPGA firmware loader depend on ARCH_SOCFPGA
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] param: let dev_add_param return the newly created param
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/6] fs: store pointer to fsdev instead of dev in struct filep
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 5/6] libfile: add diff_file function
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 6/6] commands: implement 'diff' command
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 3/6] fs: Store the path in struct filep
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 4/6] fs: implement fstat
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 2/6] fs: do not lookup global FILE * when the file is already available
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/2] led: trigger: use max_value to turn on led instead of hardcoded '1'
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 2/2] led: trigger: Turn of flashing leds only once
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 4/5] ARM: nitrogen6x: Add support for 2GB board variants
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 2/5] ARM: nitrogen6x: update 1066MHz 4x128M16 timing from U-Boot
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 5/5] ARM: nitrogen6x: remove clock gate manipulation from DCD
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/5] ARM: nitrogen6x: whitespace cleanup
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 3/5] ARM: nitrogen6x: Fix Duallite RAM Timing
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] clock.c: fix whitespaces
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 0/4] Add phyFLEX-AM335x support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 00/19] PCI and Tegra series revamp
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 1/2] ARM: tegra30: add environment path to Beaver DT
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] input: Let input support depend on !CONSOLE_NONE
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: most xxx_defconfig stop linking when console support set to CONSOLE_NONE
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
most xxx_defconfig stop linking when console support set to CONSOLE_NONE
From
: Kevin Du Huanpeng <u74147@xxxxxxxxx>
[no subject]
From
: Kevin Du Huanpeng <u74147@xxxxxxxxx>
Re: [PATCH] pci: split out device init
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH] pci: split out device init
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH] clock.c: fix whitespaces
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH] clock.c: fix whitespaces
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 17/19] MPC5125/FEC: add another FEC driver for the MPC5125 SoC
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 19/19] MPC5125/GPIO: add a generic GPIO driver
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 16/19] MPC5xxx/serial: add support for the MPC5125 SoC
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 07/19] arch/MPC5xxx: separate architecture's main SoC header file
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 18/19] MPC5125/WDG: add a watchdog driver
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 14/19] arch/MPC5xxx: add MPC5125 SoC support
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 12/19] MPC5xxx/serial: use new shared register description
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 01/19] arch/MPC5xxx: fix linker script for MPC5200
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 15/19] arch/MPC5xxx: add MPC5125 to the build-system
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 09/19] arch/MPC5xxx: just use macros instead of anonymous digits
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 02/19] arch/MPC5xxx: use a mach specific linker script instead of a board specific one
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 13/19] MPC5xxx/serial: re-factor the code to share it between MPC5200/MPC5125
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 08/19] arch/MPC5xxx: separate clock functions
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[RFC] Add PowerPC MPC5125 support
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 10/19] MPC5xxx/serial: use dedicated I/O functions instead of memory access
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 11/19] MPC5xxx/serial: provide an easier way to share register description
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 03/19] arch/MPC5xxx: replace 'depends on' by 'select'
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 04/19] arch/MPC5xxx: Simplify the calculation
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 05/19] arch/MPC5xxx: just a format clean up
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
[PATCH 06/19] arch/MPC5xxx: move away existing files to be able to add a new SoC type
From
: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
Re: at91 usbserial issue
From
: Grégory Hermant <gregory.hermant@xxxxxxxxxxxxxxxxx>
[PATCH 3/4] boards: Add phytec-phyflex-am335x
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 1/4] net: cpsw: Allow gigabit connection
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 0/4] Add phyFLEX-AM335x support
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 4/4] pfla03: add to am335x_defconfig
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 2/4] net: micrel: Add ksz8081 support
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
Re: at91 usbserial issue
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] commands: select FILE_LIST for usbgadget
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/2] ARM: tegra30: add environment path to Beaver DT
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 2/2] ARM: tegra124: add environment path to Jetson-TK1 DT
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 18/19] net: add rtl8169 driver
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 19/19] ARM: tegra: enable network related options in defconfig
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 16/19] pci: add Tegra host controller driver
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 14/19] tegra: pmc: add powerdomain handling
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 15/19] of: import pci range parser from linux
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 05/19] pci: setup bridges and traverse buses behind them
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 10/19] clk: tegra: add PLLE setup functions
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 11/19] clk: tegra30: add PCIe clocks
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 17/19] ARM: tegra: advertise PCI support
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 04/19] pci: properly populate prefetchable BARs
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 08/19] pci: track parent<->child relationship
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 07/19] pci: prettyprint device names
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 09/19] commands: lspci: go down into subordinate busses
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 13/19] ARM: tegra: beaver: enable PEX voltage rail
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 12/19] i2c: tegra: move to fs initcall
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 02/19] pci: split out device init
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 00/19] PCI and Tegra series revamp
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 06/19] pci: defer device registration until after bridge setup
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 03/19] pci: add resource enum
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 01/19] MIPS: malta: fix pci IO resource assignment
From
: Lucas Stach <dev@xxxxxxxxxx>
at91 usbserial issue
From
: Grégory Hermant <gregory.hermant@xxxxxxxxxxxxxxxxx>
[PATCH] commands: select FILE_LIST for usbgadget
From
: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
v2014.10.0
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] i2c: omap: fix dts property "clock-frequency" usage
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: Newbie question
From
: Masahiro Yamada <yamada.m@xxxxxxxxxxxxxxxx>
[PATCH 2/2] MIPS: malta: fix pci IO resource assignment
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 0/2] Increamental fixes for the PCI series
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 1/2] fixup! of: import pci range parser from linux
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH] i2c: omap: fix dts property "clock-frequency" usage
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
Re: Newbie question
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: Little bug
From
: luigi origa <luigi.origa@xxxxxxxxx>
Newbie question
From
: Masahiro Yamada <yamada.m@xxxxxxxxxxxxxxxx>
Re: [PATCH 00/15] PCI bridges and Tegra PCI stuff
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: [PATCH 00/15] PCI bridges and Tegra PCI stuff
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCHv3 1/5] of: base: Add for_each_node_by_name_from
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: Little bug
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Little bug
From
: luigi origa <luigi.origa@xxxxxxxxx>
[PATCH 4/4] Introduce message logging support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/4] clock: Add a variable with the first timestamp after startup
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
dmesg Support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 3/4] startup: Don't print multiple lines with pr_info
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 2/4] clock: make get_time_ns() safe to be called without clocksource
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 4/6] ARM: am335x Phytec phyCORE: register SPI NOR and NAND update handlers
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 2/6] ARM: am33xx update SPI NOR: Ask use before flashing
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 6/6] Documentation: Add some TI AM335x specific documentation
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 3/6] ARM: am335x: Add a NAND update handler for the regular barebox
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/6] ARM: am33xx update SPI NOR: Check image size before flashing
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
AM335x patches
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 5/6] ARM: am335x: NAND MLO update: always let the user confirm updating
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCHv3 5/5] commands: add of_display_timings
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCHv3 1/5] of: base: Add for_each_node_by_name_from
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCHv3 3/5] of: base: Add of_parse_phandle_from
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCHv3 2/5] of: base: Add of_find_node_by_phandle_from
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCHv3 4/5] of: Added of_set_property_to_child_phandle
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
Re: [PATCH] commands: usb: drop help for force rescan option
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] commands: usb: drop help for force rescan option
From
: "Wjatscheslaw Stoljarski (Slawa)" <wjatscheslaw.stoljarski@xxxxxxxxxxxx>
Re: [PATCHv2] commands: add of_display_timings
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCHv2] commands: add of_display_timings
From
: Teresa Gamez <t.gamez@xxxxxxxxx>
Re: picotcp tftp support [was Adding IPv4 multicast support]
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: picotcp tftp support [was Adding IPv4 multicast support]
From
: Michele Di Pede <michele.di.pede@xxxxxxx>
Re: picotcp tftp support [was Adding IPv4 multicast support]
From
: Daniele Lacamera <daniele.lacamera@xxxxxxx>
Re: [PATCHv2] commands: add of_display_timings
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: picotcp tftp support [was Adding IPv4 multicast support]
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCHv2] commands: add of_display_timings
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
Re: picotcp tftp support [was Adding IPv4 multicast support]
From
: PicoTCP <picotcp@xxxxxxx>
[PATCH 5/9] USB: Add MUSB driver from Linux
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 6/9] USB: MUSB: Add barebox specific changes
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/9] USB: add usb phy header file
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 7/9] ARM: dts: Update am335x-bone-common.dtsi
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 9/9] ARM: am335x_defconfig: Enable USB support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
MUSB support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 8/9] Documentation: USB: Add description for OTG device
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 2/9] USB: gadget: put poller into core
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 4/9] ARM: AM33xx: Enable USB and USB phy clocks
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 3/9] USB: gadget: allow multiple udc drivers
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: nvidia jetson tk1 help
From
: Ryan Du Bois <rdub@xxxxxxxxxx>
Re: nvidia jetson tk1 help
From
: Lucas Stach <dev@xxxxxxxxxx>
Re: [PATCH 00/15] PCI bridges and Tegra PCI stuff
From
: Lucas Stach <dev@xxxxxxxxxx>
Re: [PATCH 00/15] PCI bridges and Tegra PCI stuff
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: nvidia jetson tk1 help
From
: Ryan Du Bois <rdub@xxxxxxxxxx>
[PATCH 14/15] pci: add Tegra host controller driver
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 04/15] pci: setup bridges and traverse buses behind them
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 08/15] clk: tegra: add PLLE setup functions
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 09/15] clk: tegra30: add PCIe clocks
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 13/15] of: import pci range parser from linux
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 12/15] tegra: pmc: add powerdomain handling
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 03/15] pci: properly populate prefetchable BARs
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 07/15] commands: lspci: go down into subordinate busses
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 11/15] ARM: tegra: beaver: enable PEX voltage rail
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 15/15] ARM: tegra: advertise PCI support
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 10/15] i2c: tegra: move to fs initcall
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 01/15] pci: split out device init
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 02/15] pci: add resource enum
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 06/15] pci: track parent<->child relationship
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 00/15] PCI bridges and Tegra PCI stuff
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 05/15] pci: prettyprint device names
From
: Lucas Stach <dev@xxxxxxxxxx>
Re: nvidia jetson tk1 help
From
: Ryan Du Bois <rdub@xxxxxxxxxx>
[PATCH] USB: gadget: dfu: Add max_speed to dfu_driver
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] USB: gadget: fastboot: Add missing include
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 2/2] commands: add of_display_timings
From
: Teresa Gamez <t.gamez@xxxxxxxxx>
Re: nvidia jetson tk1 help
From
: Lucas Stach <dev@xxxxxxxxxx>
Re: [PATCH] commands/digest: add verify support
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH] imx35-regs: add UART2 to CCM defines
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] imx-image: handle i.MX35 special case
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] of: fdt: fix typo in header
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] i2c: at91: fix coding style issue
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 2/2] commands: add of_display_timings
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] read_file_2: Fix return value
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
nvidia jetson tk1 help
From
: Ryan Du Bois <rdub@xxxxxxxxxx>
[PATCH] imx-image: handle i.MX35 special case
From
: Eric Bénard <eric@xxxxxxxxxx>
[PATCH] imx35-regs: add UART2 to CCM defines
From
: Eric Bénard <eric@xxxxxxxxxx>
[PATCH] of: fdt: fix typo in header
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH] commands/digest: add verify support
From
: Eric Bénard <eric@xxxxxxxxxx>
[PATCH] i2c: at91: add at91sam9x5 config
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH] i2c: at91: fix coding style issue
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH] i2c: at91: add support of device tree
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH] I2C: at91: fix the method for interrupt
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH 2/2] commands: add of_display_timings
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 1/2] of: Added of_set_property_to_child_phandle
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH] read_file_2: Fix return value
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
Re: [PATCH 4/4] net: phy: Use poller for periodic link check
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 0/4] ARM: at91: add sama5d4ek board support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: Subject: [PATCH] cfi: print size in human readable format
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH v2 4/4] ARM: at91: add sama5d4ek board support
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH v2 2/4] ARM: at91: add sama5d4 soc support #1
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH v2 3/4] ARM: at91: add sama5d4 soc support #2
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH v2 1/4] net: macb: enable GEM with only FE feature
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH v2 0/4] ARM: at91: add sama5d4ek board support
From
: Bo Shen <voice.shen@xxxxxxxxx>
Re: [PATCH 7/9] ARM: at91: add sama5d4 soc support #1
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: Subject: [PATCH] cfi: print size in human readable format
From
: Franck Jullien <franck.jullien@xxxxxxxxx>
Subject: [PATCH] cfi: print size in human readable format
From
: Franck Jullien <franck.jullien@xxxxxxxxx>
Re: imx-image & i.MX35
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 1/2] serial-imx: fix for non of usage
From
: Eric Bénard <eric@xxxxxxxxxx>
Re: [PATCH 2/2] eukrea-cpuimx35: refresh configuration
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 1/2] serial-imx: fix for non of usage
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] ARM: defconfig: remove board specific mvebu defconfigs
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 6/6] ARM: Add mvebu_defconfig
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 7/9] ARM: at91: add sama5d4 soc support #1
From
: Bo Shen <voice.shen@xxxxxxxxx>
imx-image & i.MX35
From
: Eric Bénard <eric@xxxxxxxxxx>
[PATCH 1/2] serial-imx: fix for non of usage
From
: Eric Bénard <eric@xxxxxxxxxx>
[PATCH 2/2] eukrea-cpuimx35: refresh configuration
From
: Eric Bénard <eric@xxxxxxxxxx>
Re: [PATCH 5/9] net: macb: using default value for FBLDO
From
: Bo Shen <voice.shen@xxxxxxxxx>
Re: [PATCH 0/9] ARM: at91: add sama5d4ek board support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 5/9] net: macb: using default value for FBLDO
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] ARM: i.MX: edmqmx6: free phy-reset gpio pin
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] net: asix: handle packets crossing URB boundaries
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 6/6] ARM: Add mvebu_defconfig
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH] efi: use objcopy with CROSS_COMPILE prefix
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 0/6] mvebu multi SoC support
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH v2 0/6] mvebu multi SoC support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 0/6] mvebu multi SoC support
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH v2 0/6] mvebu multi SoC support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 0/4] KaRo TX6u support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] efi: use objcopy with CROSS_COMPILE prefix
From
: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
net: phy updates
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/4] net: phy: introduce phy_aneg_done
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 4/4] net: phy: Use poller for periodic link check
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 2/4] net: phy: Use xzalloc for small allocations
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 3/4] net: phy: don't use 'dev' as name for variables of type struct phy_device
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] i2c: at91: add support of device tree
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 7/9] ARM: at91: add sama5d4 soc support #1
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 8/9] ARM: at91: add sama5d4 soc support #2
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH v2 0/6] mvebu multi SoC support
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH v2 2/6] ARM: mvebu: Add machine compatible to mbus ranges
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH v2 6/6] ARM: Add mvebu_defconfig
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH v2 1/6] ARM: mvebu: Add common reset_cpu function
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH v2 3/6] ARM: mvebu: Simplify memory init order
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH v2 5/6] ARM: mvebu: Allow multiple SoCs
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH v2 4/6] ARM: mvebu: Check for correct SoC in of_fixup callback
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH 8/9] ARM: at91: add sama5d4 soc support #2
From
: Raphaël Poggi <raphio98@xxxxxxxxx>
[PATCH] I2C: at91: fix the method for interrupt
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH] i2c: at91: add support of device tree
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH] net: Call edev->recv with correct eth_device
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH v2 4/4] ARM: i.MX6: add support for Karo TX6X family
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v2 2/4] imx-image: Handle check commands correctly
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v2 1/4] imx-usb-loader: Skip unknown tags
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v2 3/4] arm: mach-imx: add more ddr register defines
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v2 0/4] KaRo TX6u support
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH 9/9] ARM: at91: add sama5d4ek board support
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH 7/9] ARM: at91: add sama5d4 soc support #1
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH 8/9] ARM: at91: add sama5d4 soc support #2
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH 4/9] nand: atmel: runtime to generate galois table
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH 3/9] ARM: at91: clock: use cpu_has_pcr for pcr1 checking
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH 2/9] ARM: atmel: sama5d3 is a family member of sama5
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH 6/9] mci: atmel: add new ip version 0x600 support
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH 1/9] ARM: at91: move pmc base address into soc header
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH 5/9] net: macb: using default value for FBLDO
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH 0/9] ARM: at91: add sama5d4ek board support
From
: Bo Shen <voice.shen@xxxxxxxxx>
Re: [PATCH v2 1/2] phy: marvell: move IDs to own header
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 2/5] ARM: mvebu: Simplify memory init order
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 2/5] ARM: mvebu: Simplify memory init order
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH] ARM: i.MX: edmqmx6: free phy-reset gpio pin
From
: Alexander Shiyan <shc_work@xxxxxxx>
Re: [PATCH] ARM: i.MX: edmqmx6: free phy-reset gpio pin
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 1/4] phy/micrel: disable Asym_Pause support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 2/5] ARM: mvebu: Simplify memory init order
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] ARM: i.MX: edmqmx6: free phy-reset gpio pin
From
: Silvio Fricke <silvio.fricke@xxxxxxxxx>
[PATCH] gpio phy-reset problem
From
: Silvio Fricke <silvio.fricke@xxxxxxxxx>
Re: [PATCH 1/5] ARM: mvebu: Add common reset_cpu function
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 4/4] ARM: i.MX6: add support for Karo TX6X family
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH 2/4] imx-image: Handle check commands correctly
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH 3/4] arm: mach-imx: add more ddr register defines
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH 1/4] imx-usb-loader: Skip unknown tags
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
Re: [PATCH 2/5] ARM: mvebu: Simplify memory init order
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH 1/5] ARM: mvebu: Add common reset_cpu function
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH v2 2/2] arm: imx6: add Gateworks Ventana board
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH v2 1/2] phy: marvell: move IDs to own header
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH] net: asix: handle packets crossing URB boundaries
From
: Rolf Evers-Fischer <embedded24@xxxxxxxxxxxxxxxx>
[PATCH] gpiolib: gpio_request: correct return code of a already requested gpio
From
: Silvio Fricke <silvio.fricke@xxxxxxxxx>
[PATCH] double requested gpio problem
From
: Silvio Fricke <silvio.fricke@xxxxxxxxx>
Re: [PATCH 2/2] arm: imx6: add Gateworks Ventana board
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] Makefile: enable Werror=implicit-function-declaration
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 5/5] ARM: Add mvebu_defconfig
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 4/5] ARM: mvebu: Allow multiple SoCs
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] Makefile: enable Werror=implicit-function-declaration
From
: Lucas Stach <dev@xxxxxxxxxx>
Re: [PATCH 5/5] ARM: Add mvebu_defconfig
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH 4/5] ARM: mvebu: Allow multiple SoCs
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH 2/2] arm: imx6: add Gateworks Ventana board
From
: Lucas Stach <dev@xxxxxxxxxx>
[PATCH 1/2] phy: marvell: move IDs to own header
From
: Lucas Stach <dev@xxxxxxxxxx>
Re: [PATCH 0/2] mvebu: Openblocks A6 board support
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH 2/4] ARM:phyFLEX-iMX6: Remove eth phy reset form board
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 1/4] phy/micrel: disable Asym_Pause support
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 4/4] ARM:phyFLEX-iMX6 New Ram Timings for Q/DL
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 3/4] ARM:phyFLEX-iMX6: Remove mmd_write_reg from board
From
: Christian Hemp <c.hemp@xxxxxxxxx>
Re: [PATCH 4/5] ARM: mvebu: Allow multiple SoCs
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: mvebu multi SoC support
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 4/5] ARM: mvebu: Allow multiple SoCs
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH 2/5] ARM: mvebu: Simplify memory init order
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 5/5] ARM: Add mvebu_defconfig
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/5] ARM: mvebu: Add common reset_cpu function
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 3/5] ARM: mvebu: Check for correct SoC in of_fixup callback
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 4/5] ARM: mvebu: Allow multiple SoCs
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
mvebu multi SoC support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 01/10] dts:imx6:pfla02: Add nand partitions
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 0/2] MIPS: xburst: trivial patches
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 09/10] resource: Let dev_request_mem_region return an error pointer
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] pinctrl: fix Kconfig dependencies
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 07/10] resource: Let dev_get_mem_region return an error pointer
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH] pinctrl: fix Kconfig dependencies
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH 08/10] dts:imx6:pfla02:Move spi partitions imx6qdl-phytec-pfla02
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 10/10] ARM:phyFLEX-iMX6: Add bootsource detection
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 07/10] dts:imx6:pfla02: move mac read to module
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 04/10] ARM:imx6:phyflex: Add defaultenv
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 09/10] dts:imx6:pfla02: Add env node for SPI-NOR and NAND
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 03/10] ARM:imx6:phycard: Switch env to defaultenv_append_directory
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 02/10] dts:imx6q:pcaaxl3: Add oftree partition to nand
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 05/10] ARM:imx6:pfla02: Remove redundant code
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 01/10] dts:imx6:pfla02: Add nand partitions
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 06/10] dts:imx6:pfla02: Remove memory node
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH 0/2] MIPS: xburst: trivial patches
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 2/2] MIPS: ritmix-rzx50_defconfig: update DEBUG_LL; enable IMD
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 1/2] MIPS: xburst: Kconfig: add comment
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: [PATCH 09/10] resource: Let dev_request_mem_region return an error pointer
From
: Baruch Siach <baruch@xxxxxxxxxx>
[PATCH 09/10] resource: Let dev_request_mem_region return an error pointer
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 10/10] resource: Let request_ioport_region return an error pointer
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 08/10] resource: Let dev_request_mem_region_by_name return an error pointer
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 07/10] resource: Let dev_get_mem_region return an error pointer
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 05/10] resource: Let request_iomem_region return an error pointer
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 06/10] resource: Let dev_get_resource return an error pointer
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 03/10] resource: Let dev_get_mem_region_by_name return an error pointer
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 01/10] ata: platform_ide: cleanup resource requesting
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 02/10] resource: Let dev_get_resource_by_name return an error pointer
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Return error pointers from resource handling functions
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 04/10] resource: Let __request_region return an error pointer
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] pinctrl: fix Kconfig dependencies
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] input: imx_keypad: remove unused variable
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] ARM: remove nonexisting env directories from defconfigs
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] Add some .gitignore files
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [RFC] net: dm9k: fix reset routine
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] commands: of_dump: Fix return value
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] checkpatch.pl: check for the FSF mailing address
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 05/10] UBI: fix ubi free PEBs count calculation
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 02/10] UBI: avoid program operation on NOR flash after erasure interrupted
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
UBI patches
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 04/10] UBI: fix error path in __wl_get_peb
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 06/10] UBI: fix rb_tree node comparison in add_map
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 01/10] UBI: fix error return code
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 10/10] UBI: bugfix in ubi_wl_flush()
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 07/10] UBI: fix the volumes tree sorting criteria
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 08/10] UBI: fastmap: do not miss bit-flips
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 03/10] UBI: fix some use after free bugs
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 09/10] UBI: init_volumes: Ignore volumes with no LEBs
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] commands: of_dump: Fix return value
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[RFC] net: dm9k: fix reset routine
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH] checkpatch.pl: check for the FSF mailing address
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: [PATCH] defaultenv: Reorder overlay append order
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [RFC] net: dm9k: add device tree support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] net: dm9k: show only one phy on miibus
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] net: dm9k: fix copy-paste typo
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 0/9] MIPS: xburst: add JZ4780 SoC and MIPS Creator CI20 board support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] defaultenv: Reorder overlay append order
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[RFC] net: dm9k: add device tree support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH] net: dm9k: show only one phy on miibus
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH] net: dm9k: fix copy-paste typo
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 9/9] Documentation: add MIPS Creator CI20 board mini-howto
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 7/9] MIPS: add MIPS Creator CI20 board support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 8/9] MIPS: add img-ci20_defconfig
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 5/9] MIPS: xburst: debug_ll: rework common code, add JZ4780 support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 2/9] MIPS: dts: use physical addresses (as Linux does)
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 4/9] MIPS: add (another) Ingenic vendor ID
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 0/9] MIPS: xburst: add JZ4780 SoC and MIPS Creator CI20 board support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 1/9] common.h: use special IOMEM() for MIPS
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 3/9] MIPS: xburst: add JZ4780 SoC support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 6/9] MIPS: dts: add jz4780.dtsi
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: [PATCH v2] mach-at91: declare device tree clock
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 7/7] Documentation: add OpenRISC or1ksim emulator section
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: AT91 pinctrl/gpio fixes
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: [PATCH v4 0/5] firmware programming interface
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 7/7] Documentation: add OpenRISC or1ksim emulator section
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 0/7] openrisc: add device tree support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: AT91 pinctrl/gpio fixes
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] pinctrl: at91: add driver data
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH v2] pinctrl: at91: add driver data
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v2] mach-at91: declare device tree clock
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: [PATCH] mach-at91: declare device tree clock
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: AT91 pinctrl/gpio fixes
From
: Raphaël Poggi <raphio98@xxxxxxxxx>
[PATCH 3/4] pinctrl: AT91: Only use of_alias_get_id when probed from devicetree
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 2/4] ARM: AT91: Make gpio mux functions inline
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
AT91 pinctrl/gpio fixes
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 1/4] ARM: AT91: Add missing include
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 4/4] pinctrl: AT91: use alias_idx to calculate the base gpio number
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] pinctrl: at91: add driver data
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH] mach-at91: declare device tree clock
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH] pinctrl: at91: retrieve device id in non dtb probe
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH] pinctrl: at91: fix the pin_to_controller function
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v4 4/5] Firmware: socfpga: Add SoCFPGA FPGA program support
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v4 3/5] DT: Add binding for Altera FPGAs in passive-serial mode
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v4 1/5] Add a Firmware programming framework
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v4 2/5] Firmware: provide a handler to program Altera FPGAs
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v4 0/5] firmware programming interface
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v4 5/5] DT: Add binding for Altera SOCFPGA FPGA Manager
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
Re: [PATCH v2 7/7] Documentation: add OpenRISC or1ksim emulator section
From
: Franck Jullien <franck.jullien@xxxxxxxxx>
[PATCH v2 6/7] openrisc: generic_defconfig: enable device tree stuff
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH v2 2/7] net: ethoc: add device tree support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH v2 4/7] openrisc: dts: import or1ksim.dts from linux-3.16
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH v2 0/7] openrisc: add device tree support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH v2 3/7] openrisc: add initial device tree support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH v2 7/7] Documentation: add OpenRISC or1ksim emulator section
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH v2 1/7] openrisc: generic board: reserve 512K for barebox
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH v2 5/7] openrisc: generic board: reduce platform code
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: [PATCH v2] mtd: add mtdram device (which build mtd over ram area - useful for FRAM oder MRAM)
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3 4/4] Firmware: socfpga: Add SoCFPGA FPGA program support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3 2/4] Firmware: provide a handler to program Altera FPGAs
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3 2/4] Firmware: provide a handler to program Altera FPGAs
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3 1/4] Add a Firmware programming framework
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] nand: orion: Limit to Kirkwood platform
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] Documentation: davinci.rst: fix code-block formatting
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] dts:imx6:pfla02: Fix SPI NOR for phyFLEX-i.MX6
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] nand: orion: Limit to Kirkwood platform
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
Re: [PATCH] commands: add lodvar - load variable from file content
From
: Alexander Aring <alex.aring@xxxxxxxxx>
Re: [PATCH] commands: add lodvar - load variable from file content
From
: Sebastian Block <basti@xxxxxxxxxxxxxxx>
Re: [PATCH] commands: add lodvar - load variable from file content
From
: Alexander Aring <alex.aring@xxxxxxxxx>
[PATCH] commands: add lodvar - load variable from file content
From
: Sebastian Block <basti@xxxxxxxxxxxxxxx>
[PATCH v2] mtd: add mtdram device (which build mtd over ram area - useful for FRAM oder MRAM)
From
: Sebastian Block <basti@xxxxxxxxxxxxxxx>
[PATCH] dts:imx6:pfla02: Fix SPI NOR for phyFLEX-i.MX6
From
: Christian Hemp <c.hemp@xxxxxxxxx>
[PATCH] Documentation: davinci.rst: fix code-block formatting
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: picotcp tftp support [was Adding IPv4 multicast support]
From
: Daniele Lacamera <daniele.lacamera@xxxxxxx>
Re: [PATCH 1/5] ARM: phyCORE-AM335x: Updated SPI NOR dts entries
From
: Alexander Aring <alex.aring@xxxxxxxxx>
Re: [PATCH v2] ARM: phyCORE-AM335x: Update partition table
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 1/5] ARM: phyCORE-AM335x: Updated SPI NOR dts entries
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [RFC] ARM/mem: handle data aborts gracefully for md
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH v2] ARM: phyCORE-AM335x: Update partition table
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
Re: [PATCH 1/5] ARM: phyCORE-AM335x: Updated SPI NOR dts entries
From
: Alexander Aring <alex.aring@xxxxxxxxx>
Re: [PATCH] serial: imx: Fix for non-devicetree boards
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] ARM: dts: i.MX53: voipac: Provide NAND flash partition table
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 1/5] ARM: phyCORE-AM335x: Updated SPI NOR dts entries
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: picotcp tftp support [was Adding IPv4 multicast support]
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH] ARM: dts: i.MX53: voipac: Provide NAND flash partition table
From
: Rostislav Lisovy <lisovy@xxxxxxxxx>
[RFC] ARM: dts: i.MX53: voipac: Provide NAND flash partition table
From
: Rostislav Lisovy <lisovy@xxxxxxxxx>
[PATCH v3 4/4] Firmware: socfpga: Add SoCFPGA FPGA program support
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v3 1/4] Add a Firmware programming framework
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v3 2/4] Firmware: provide a handler to program Altera FPGAs
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
[PATCH v3 3/4] DT: Add binding for Altera FPGAs in passive-serial mode
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
v2014.09.0
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH v3 0/4] firmware programming interface
From
: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
Re: [PATCH] Fix barebox metadata
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3 2/3] pinctrl: at91: add pinctrl driver
From
: Raphaël Poggi <raphio98@xxxxxxxxx>
[PATCH] Fix barebox metadata
From
: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Re: [PATCH] Documentation: .gitignore: ignore 'commands/' generated directory
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3 2/3] pinctrl: at91: add pinctrl driver
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 5/5] ARM: phyCORE-AM335x: Update partition table
From
: Alexander Aring <alex.aring@xxxxxxxxx>
Re: [PATCH 5/5] ARM: phyCORE-AM335x: Update partition table
From
: Alexander Aring <alex.aring@xxxxxxxxx>
[PATCH 3/5] ARM: phyCORE-AM335x: Fixup RAM setting naming
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 2/5] ARM: phyCORE-AM335x: Update RAM Timings
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 5/5] ARM: phyCORE-AM335x: Update partition table
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 1/5] ARM: phyCORE-AM335x: Updated SPI NOR dts entries
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
[PATCH 4/5] ARM: phyCORE-AM335x: Add support for 2x512MB RAM
From
: Teresa Gámez <t.gamez@xxxxxxxxx>
Re: [PATCH] Makefile: remove never reached code
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH] Makefile: remove never reached code
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH] Documentation: .gitignore: ignore 'commands/' generated directory
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: [PATCH v3 2/3] pinctrl: at91: add pinctrl driver
From
: Raphaël Poggi <raphio98@xxxxxxxxx>
Re: [PATCH] EFI: add missing include
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3 2/3] pinctrl: at91: add pinctrl driver
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] EFI: add missing include
From
: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
Re: [PATCH v3 2/3] pinctrl: at91: add pinctrl driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: [PATCH v3 1/3] arm: mach-at91: move gpio.h to include folder
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] mtd: atmel_nand: fix null pointer dereference
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3 2/3] pinctrl: at91: add pinctrl driver
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3 3/3] at91sam9g45: add device tree gpio clocks
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] mtd: atmel_nand: fix null pointer dereference
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH] mtd: atmel_nand: fix null pointer dereference
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v3 3/3] at91sam9g45: add device tree gpio clocks
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v3 1/3] arm: mach-at91: move gpio.h to include folder
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v3 2/3] pinctrl: at91: add pinctrl driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v3 0/3] Add atmel pinctrl driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: [PATCH v2 1/2] pinctrl: at91: add pinctrl driver
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 1/2] pinctrl: at91: add pinctrl driver
From
: Raphaël Poggi <raphio98@xxxxxxxxx>
[PATCH] ARM: dts: move imx6q-embedsky-e9.dtsi to arch/arm/dts/boot
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] ARM: dts: Use local version of rk3188-clocks.dtsi
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3 0/3] Add device tree support of Atmel NAND driver
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3] commands: of_dump switch to get fixed devictree
From
: Jan Weitzel <j.weitzel@xxxxxxxxx>
[PATCH v3 3/3] mtd: atmel_nand: add support for device tree
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v3 1/3] mtd: nand: add has_pmecc member
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v3 0/3] Add device tree support of Atmel NAND driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v3 2/3] mtd: atmel_nand: retrieve ecc_mode from pdata
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: [BUG] readline history
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [RFC] MTD m25p80 3-byte addressing and boot problem
From
: Mark Marshall <markmarshall14@xxxxxxxxx>
Re: [PATCH 0/2] Rockchip: adapt pinctrl driver to new dts
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] commands: saveenv: Fix comment about directories in help text
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3] commands: of_dump switch to get fixed devictree
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3] commands: of_dump switch to get fixed devictree
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v3 2/3] at91sam9g45: clock: add i2c clocks
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [RFC] MTD m25p80 3-byte addressing and boot problem
From
: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [PATCH 2/2] EFI: handle more boot devices
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH v2 1/2] pinctrl: at91: add pinctrl driver
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 2/2] EFI: handle more boot devices
From
: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
Re: [PATCH 4/5] board: atmel: initialise ecc_mode
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 1/5] mtd: nand: remove NAND_ATMEL_PMECC
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[RFC] MTD m25p80 3-byte addressing and boot problem
From
: Matteo Fortini <matteo.fortini@xxxxxxxxx>
Re: [PATCH] scripts: gitignore: update based on Makefile
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 1/2] nand: Add Marvell Orion NAND driver
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 0/2] mvebu: Openblocks A6 board support
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 0/3] misc .gitignore-related fixes
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 1/4] Makefile.lib: imxcfg: fix include path
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH] ARM: i.MX: tqma53: remove cpu_to_be32( from imx script
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 2/2] EFI: handle more boot devices
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 1/2] EFI: fix error handling in efi_get_boot()
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH 0/5] mvebu: Add network support for Armada 370/XP
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] ubiformat: Include missing header
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [BUG] readline history
From
: Alexander Aring <alex.aring@xxxxxxxxx>
Re: [BUG] readline history
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] mtd: add mtdram device (which build mtd over ram area - useful for FRAM oder MRAM)
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] ubi: add setting devnum to ubiattach
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: [PATCH] mtd: add mtdram device (which build mtd over ram area - useful for FRAM oder MRAM)
From
: Alexander Aring <alex.aring@xxxxxxxxx>
Re: [PATCH] mtd: add mtdram device (which build mtd over ram area - useful for FRAM oder MRAM)
From
: Alexander Aring <alex.aring@xxxxxxxxx>
Re: [PATCH] ubi: add setting devnum to ubiattach
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH] ubi: add setting devnum to ubiattach
From
: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
Re: [BUG] readline history
From
: Alexander Aring <alex.aring@xxxxxxxxx>
Re: [BUG] readline history
From
: Alexander Aring <alex.aring@xxxxxxxxx>
[PATCH] mtd: add mtdram device (which build mtd over ram area - useful for FRAM oder MRAM)
From
: basti@xxxxxxxxxxxxxxx
Re: [BUG] readline history
From
: Alexander Aring <alex.aring@xxxxxxxxx>
[BUG] readline history
From
: Teresa Gamez <t.gamez@xxxxxxxxx>
[PATCH] net: phy: Support Marvell 88E1318S and 88E1510 PHYs
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH 4/5] net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH 1/2] nand: Add Marvell Orion NAND driver
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH 1/2] nand: Add Marvell Orion NAND driver
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH 4/5] net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] nand: Add Marvell Orion NAND driver
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] nand: Add Marvell Orion NAND driver
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 4/5] net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH 1/5] ARM: mvebu: Enable PUP register
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH 1/2] nand: Add Marvell Orion NAND driver
From
: Alexander Aring <alex.aring@xxxxxxxxx>
Re: [PATCH 1/2] nand: Add Marvell Orion NAND driver
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH 0/2] mvebu: Openblocks A6 board support
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [PATCH 2/2] ARM: mvebu: Add Plat'home's Kirkwood Openblocks A6 board support
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[PATCH 0/5] mvebu: Add network support for Armada 370/XP
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
[PATCH 2/5] net: phy: Support Marvell 88EE1545 PHY
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
[PATCH 1/5] ARM: mvebu: Enable PUP register
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
[PATCH 4/5] net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
[PATCH 5/5] configs: Add network options to Armada 370/XP boards
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
[PATCH 3/5] net: phy: Support Marvell 88EE1543 PHY
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
[PATCH 2/2] ARM: mvebu: Add Plat'home's Kirkwood Openblocks A6 board support
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
[PATCH 0/2] mvebu: Openblocks A6 board support
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
[PATCH 1/2] nand: Add Marvell Orion NAND driver
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
[PATCH] ubiformat: Include missing header
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
[PATCH v4] commands: of_dump switch to get fixed devictree
From
: Jan Weitzel <j.weitzel@xxxxxxxxx>
Re: [PATCH v3] commands: of_dump switch to get fixed devictree
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH v3] commands: of_dump switch to get fixed devictree
From
: Jan Weitzel <j.weitzel@xxxxxxxxx>
Re: [PATCH v2] commands: of_dump switch to get fixed devictree
From
: Jan Weitzel <j.weitzel@xxxxxxxxx>
[PATCH] serial: imx: Fix for non-devicetree boards
From
: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
[PATCH] scripts: gitignore: update based on Makefile
From
: Andreas Pretzsch <apr@xxxxxxxxx>
[PATCH 4/4] arm: nitrogen6x: new memory setup from BD u-boot
From
: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
[PATCH 1/4] Makefile.lib: imxcfg: fix include path
From
: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
[PATCH 3/4] arm: mach-imx: add MMDC and CCM register defines for use in DCD
From
: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
[PATCH 2/4] scripts: imx-image: add input validation to mw
From
: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
[PATCH 2/2] EFI: handle more boot devices
From
: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
[PATCH 1/2] EFI: fix error handling in efi_get_boot()
From
: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
Re: [RFC] ARM: mvebu: Add Plathome Kirkwood Openblocks A6 board support
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Re: [RFC] ARM: mvebu: Add Plathome Kirkwood Openblocks A6 board support
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
Re: [RFC] ARM: mvebu: Add Plathome Kirkwood Openblocks A6 board support
From
: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
[RFC] ARM: mvebu: Add Plathome Kirkwood Openblocks A6 board support
From
: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
Re: v2014.08.0
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Re: v2014.08.0
From
: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[PATCH 6/6] openrisc: generic_defconfig: enable device tree stuff
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 1/6] openrisc: generic board: reserve 512K for barebox
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 5/6] openrisc: generic board: reduce platform code
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 4/6] openrisc: dts: import or1ksim.dts from linux-3.16
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 3/6] openrisc: add initial device tree support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 0/6] openrisc: add device tree support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 2/6] net: ethoc: add device tree support
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: envfs: provide an intentional way to ignore an existing external environment
From
: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
[PATCH v3 2/3] at91sam9g45: clock: add i2c clocks
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v3 3/3] I2C: at91: fix the method for interrupt
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v3 0/2] Add device tree support of i2c Atmel driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v3 1/3] i2c: at91: add support of device tree
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: [PATCH V2 0/2] Add device tree support of i2c Atmel driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: [PATCH V2 0/2] Add device tree support of i2c Atmel driver
From
: Bo Shen <voice.shen@xxxxxxxxx>
Re: v2014.08.0
From
: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
Re: envfs: provide an intentional way to ignore an existing external environment
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH 1/5] mtd: nand: remove NAND_ATMEL_PMECC
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: [PATCH V2 0/2] Add device tree support of i2c Atmel driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: [PATCH 1/2] pinctrl: at91: add pinctrl driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: envfs: provide an intentional way to ignore an existing external environment
From
: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
[PATCH 2/3] scripts: add bareboximd{,-target} to .gitignore
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 1/3] openrisc: add barebox.lds to .gitignore
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 0/3] misc .gitignore-related fixes
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
[PATCH 3/3] fixup! dtc: compile fdtget
From
: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Re: [PATCH 1/5] mtd: nand: remove NAND_ATMEL_PMECC
From
: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
Re: [RFC] gen-dtb-s: make metadata binary fields always little-endian
From
: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
Re: envfs: provide an intentional way to ignore an existing external environment
From
: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
Re: [PATCH V2 0/2] Add device tree support of i2c Atmel driver
From
: Bo Shen <voice.shen@xxxxxxxxx>
[PATCH v2 2/2] at91sam9g45: add device tree gpio clocks
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v2 1/2] pinctrl: at91: add pinctrl driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v2 0/2] Add atmel pinctrl driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: [PATCH V2 0/2] Add device tree support of i2c Atmel driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
Re: [PATCH 1/2] pinctrl: at91: add pinctrl driver
From
: Raphaël Poggi <raphio98@xxxxxxxxx>
Re: [PATCH 1/2] pinctrl: at91: add pinctrl driver
From
: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
Re: [PATCH v2 0/5] Add device tree support of Atmel NAND driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH v2 0/5] Add device tree support of Atmel NAND driver
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH 2/5] board: atmel: initialise the has_pmecc member
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH 1/5] mtd: nand: remove NAND_ATMEL_PMECC
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[PATCH 4/5] board: atmel: initialise ecc_mode
From
: Raphaël Poggi <poggi.raph@xxxxxxxxx>
[Index of Archives]
[Linux Embedded]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]