Hi,
as state before I use the atmel board for bootp everyday as the defaultenv-2 does not support
this Nack until it’s fixed
I did send patch for this in the past but they did not hit the mainline
Best Regards,
J.
> On Feb 11, 2015, at 12:00 PM, Doug Brainard <dbrainard@xxxxxxxxxxxxxxxxxxx> wrote:
>
> Bo,
>
> What error are you seeing? It was booting into Linux for me with what
> I submitted.
>
> However, I was unable to get things working without the "nand0." piece
> for each partition due to what you are seeing. I based that change on
> what I saw in mtdparts-nand file in the telit-evk-pro3 board
> directory. Any idea what would be causing that not to add the
> "nand0." automatically? I'd prefer to remove it.
>
> "bootargs.base" seems to be setting the console for barebox only. I
> had to add "linux.bootargs.console" to have the kernel command include
> the console and output the boot information. If I've misunderstood
> something, let me know, and I'll modify it.
>
> Thanks,
>
> Doug
>
>
> On Tue, Feb 10, 2015 at 7:34 PM, Bo Shen <voice.shen@xxxxxxxxx> wrote:
>> Hi Doug Brainard,
>>
>>
>> On 02/10/2015 10:28 PM, Doug Brainard wrote:
>>>
>>> ---
>>> arch/arm/boards/sama5d4ek/env/bin/init_board | 15 --------
>>> arch/arm/boards/sama5d4ek/env/boot/nand-ubi | 8 +++++
>>> arch/arm/boards/sama5d4ek/env/config | 42
>>> ----------------------
>>> arch/arm/boards/sama5d4ek/env/init/mtdparts-nand | 6 ++++
>>> arch/arm/boards/sama5d4ek/env/init/ps1 | 7 ++++
>>> arch/arm/boards/sama5d4ek/env/init/splash | 10 ++++++
>>> arch/arm/boards/sama5d4ek/env/nv/boot.default | 1 +
>>> arch/arm/boards/sama5d4ek/env/nv/bootargs.base | 1 +
>>> arch/arm/boards/sama5d4ek/env/nv/hostname | 1 +
>>> .../boards/sama5d4ek/env/nv/linux.bootargs.console | 1 +
>>> arch/arm/configs/sama5d4ek_defconfig | 5 +--
>>> arch/arm/mach-at91/Kconfig | 1 +
>>> 12 files changed, 39 insertions(+), 59 deletions(-)
>>> delete mode 100644 arch/arm/boards/sama5d4ek/env/bin/init_board
>>> create mode 100644 arch/arm/boards/sama5d4ek/env/boot/nand-ubi
>>> delete mode 100644 arch/arm/boards/sama5d4ek/env/config
>>> create mode 100644 arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
>>> create mode 100644 arch/arm/boards/sama5d4ek/env/init/ps1
>>> create mode 100644 arch/arm/boards/sama5d4ek/env/init/splash
>>> create mode 100644 arch/arm/boards/sama5d4ek/env/nv/boot.default
>>> create mode 100644 arch/arm/boards/sama5d4ek/env/nv/bootargs.base
>>> create mode 100644 arch/arm/boards/sama5d4ek/env/nv/hostname
>>> create mode 100644
>>> arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
>>>
>>> diff --git a/arch/arm/boards/sama5d4ek/env/bin/init_board
>>> b/arch/arm/boards/sama5d4ek/env/bin/init_board
>>> deleted file mode 100644
>>> index f3d417e..0000000
>>> --- a/arch/arm/boards/sama5d4ek/env/bin/init_board
>>> +++ /dev/null
>>> @@ -1,15 +0,0 @@
>>> -#!/bin/sh
>>> -
>>> -PATH=/env/bin
>>> -export PATH
>>> -
>>> -. /env/config
>>> -
>>> -splash=/env/splash.png
>>> -
>>> -if [ -f ${splash} -a -e /dev/fb0 ]; then
>>> - splash -o ${splash}
>>> - fb0.enable=1
>>> -fi
>>> -
>>> -exit 1
>>> diff --git a/arch/arm/boards/sama5d4ek/env/boot/nand-ubi
>>> b/arch/arm/boards/sama5d4ek/env/boot/nand-ubi
>>> new file mode 100644
>>> index 0000000..e8d6bde
>>> --- /dev/null
>>> +++ b/arch/arm/boards/sama5d4ek/env/boot/nand-ubi
>>> @@ -0,0 +1,8 @@
>>> +#!/bin/sh
>>> +
>>> +global.bootm.image="/dev/nand0.kernel.bb"
>>> +global.bootm.oftree="/dev/nand0.oftree.bb"
>>> +
>>> +bootargs-ip
>>> +
>>> +global.linux.bootargs.dyn.root="root=ubi0:nand0.rootfs
>>> ubi.mtd=nand0.rootfs rootfstype=ubifs noinitrd"
>>> diff --git a/arch/arm/boards/sama5d4ek/env/config
>>> b/arch/arm/boards/sama5d4ek/env/config
>>> deleted file mode 100644
>>> index ee86c07..0000000
>>> --- a/arch/arm/boards/sama5d4ek/env/config
>>> +++ /dev/null
>>> @@ -1,42 +0,0 @@
>>> -#!/bin/sh
>>> -
>>> -# use 'dhcp' to do dhcp in barebox and in kernel
>>> -# use 'none' if you want to skip kernel ip autoconfiguration
>>> -ip=dhcp
>>> -
>>> -# or set your networking parameters here
>>> -#eth0.ipaddr=a.b.c.d
>>> -#eth0.netmask=a.b.c.d
>>> -#eth0.gateway=a.b.c.d
>>> -#eth0.serverip=a.b.c.d
>>> -
>>> -# can be either 'nfs', 'tftp', 'nor' or 'nand'
>>> -kernel_loc=nand
>>> -# can be either 'net', 'nor', 'nand' or 'initrd'
>>> -rootfs_loc=nand
>>> -# can be either 'nfs', 'tftp', 'nand' or empty
>>> -oftree_loc=nand
>>> -
>>> -# can be either 'jffs2' or 'ubifs'
>>> -rootfs_type=ubifs
>>> -rootfsimage=root.$rootfs_type
>>> -ubiroot=system
>>> -
>>> -# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
>>> -kernelimage=zImage
>>> -#kernelimage=uImage
>>> -#kernelimage=Image
>>> -#kernelimage=Image.lzo
>>> -
>>> -nand_device=atmel_nand
>>>
>>> -nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),8M(recovery),176M(system),304M(userdata),-(cache)"
>>> -rootfs_mtdblock_nand=10
>>> -
>>>
>>> -m25p80_parts="64k(bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)"
>>> -
>>> -autoboot_timeout=3
>>> -
>>> -bootargs="console=ttyS0,115200 ubi.mtd=8 ubi.mtd=9 init=/init
>>> androidboot.hardware=sama5-pda androidboot.lcd=wvga"
>>> -
>>> -# set a fancy prompt (if support is compiled in)
>>> -PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
>>> diff --git a/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
>>> b/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
>>> new file mode 100644
>>> index 0000000..f20a135
>>> --- /dev/null
>>> +++ b/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
>>> @@ -0,0 +1,6 @@
>>> +#!/bin/sh
>>> +
>>>
>>> +mtdparts="256k(nand0.at91bootstrap),512k(nand0.barebox)ro,256k(nand0.bareboxenv),256k(nand0.bareboxenv2),256k(nand0.spare),512k(nand0.oftree),6M(nand0.kernel),-(nand0.rootfs)"
>>> +kernelname="atmel_nand"
>>> +
>>> +mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
>>
>>
>> Using this type of partition table make the file system can not mount
>> successfully.
>>
>> I remove the "nand0." for partition name, then it is OK. After this change,
>> it won't keep consistent with the partition table name.
>>
>> Now boot up the barebox, the partition for nand is: "/dev/barebox",
>> "/dev/barebox.bb" while not "/dev/nand0.barebox", /dev/nand0.barebox.bb". I
>> am thinking would it be possible to keep the consistent?
>>
>>
>>> diff --git a/arch/arm/boards/sama5d4ek/env/init/ps1
>>> b/arch/arm/boards/sama5d4ek/env/init/ps1
>>> new file mode 100644
>>> index 0000000..c0ec1a5
>>> --- /dev/null
>>> +++ b/arch/arm/boards/sama5d4ek/env/init/ps1
>>> @@ -0,0 +1,7 @@
>>> +#!/bin/sh
>>> +
>>> +if [ ${global.allow_color} = "true" ]; then
>>> + export PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
>>> +else
>>> + export PS1="barebox@\h:\w "
>>> +fi
>>> diff --git a/arch/arm/boards/sama5d4ek/env/init/splash
>>> b/arch/arm/boards/sama5d4ek/env/init/splash
>>> new file mode 100644
>>> index 0000000..190ef31
>>> --- /dev/null
>>> +++ b/arch/arm/boards/sama5d4ek/env/init/splash
>>> @@ -0,0 +1,10 @@
>>> +#!/bin/sh
>>> +
>>> +splash=/env/splash.png
>>> +
>>> +if [ -f ${splash} -a -e /dev/fb0 ]; then
>>> + splash -o ${splash}
>>> + fb0.enable=1
>>> +fi
>>> +
>>> +exit 1
>>> diff --git a/arch/arm/boards/sama5d4ek/env/nv/boot.default
>>> b/arch/arm/boards/sama5d4ek/env/nv/boot.default
>>> new file mode 100644
>>> index 0000000..d9dfbbc
>>> --- /dev/null
>>> +++ b/arch/arm/boards/sama5d4ek/env/nv/boot.default
>>> @@ -0,0 +1 @@
>>> +nand-ubi
>>> diff --git a/arch/arm/boards/sama5d4ek/env/nv/bootargs.base
>>> b/arch/arm/boards/sama5d4ek/env/nv/bootargs.base
>>> new file mode 100644
>>> index 0000000..476b1fb
>>> --- /dev/null
>>> +++ b/arch/arm/boards/sama5d4ek/env/nv/bootargs.base
>>> @@ -0,0 +1 @@
>>> +console=ttyS0,115200
>>
>>
>> Till now, I don't know the difference between "bootargs.base" (here maybe
>> linux.bootargs.base (?)) and "linux.bootargs.console"
>>
>>
>>> diff --git a/arch/arm/boards/sama5d4ek/env/nv/hostname
>>> b/arch/arm/boards/sama5d4ek/env/nv/hostname
>>> new file mode 100644
>>> index 0000000..b74056d
>>> --- /dev/null
>>> +++ b/arch/arm/boards/sama5d4ek/env/nv/hostname
>>> @@ -0,0 +1 @@
>>> +sama5d4ek
>>> diff --git a/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
>>> b/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
>>> new file mode 100644
>>> index 0000000..476b1fb
>>> --- /dev/null
>>> +++ b/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
>>> @@ -0,0 +1 @@
>>> +console=ttyS0,115200
>>> diff --git a/arch/arm/configs/sama5d4ek_defconfig
>>> b/arch/arm/configs/sama5d4ek_defconfig
>>> index bbf254a..f050fe4 100644
>>> --- a/arch/arm/configs/sama5d4ek_defconfig
>>> +++ b/arch/arm/configs/sama5d4ek_defconfig
>>> @@ -9,13 +9,12 @@ CONFIG_MALLOC_SIZE=0xA00000
>>> CONFIG_EXPERIMENTAL=y
>>> CONFIG_MALLOC_TLSF=y
>>> CONFIG_PROMPT="A5D4EK:"
>>> -CONFIG_GLOB=y
>>> CONFIG_PROMPT_HUSH_PS2="y"
>>> CONFIG_HUSH_FANCY_PROMPT=y
>>> CONFIG_CMDLINE_EDITING=y
>>> CONFIG_AUTO_COMPLETE=y
>>> CONFIG_CONSOLE_ACTIVATE_ALL=y
>>> -CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
>>> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
>>> CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/sama5d4ek/env"
>>> CONFIG_DEBUG_INFO=y
>>> # CONFIG_CMD_ARM_CPUINFO is not set
>>> @@ -35,6 +34,8 @@ CONFIG_CMD_PARTITION=y
>>> CONFIG_CMD_EXPORT=y
>>> CONFIG_CMD_LOADENV=y
>>> CONFIG_CMD_PRINTENV=y
>>> +CONFIG_CMD_MAGICVAR=y
>>> +CONFIG_CMD_MAGICVAR_HELP=y
>>> CONFIG_CMD_SAVEENV=y
>>> CONFIG_CMD_FILETYPE=y
>>> CONFIG_CMD_SLEEP=y
>>> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
>>> index 9ee4f30..7207232 100644
>>> --- a/arch/arm/mach-at91/Kconfig
>>> +++ b/arch/arm/mach-at91/Kconfig
>>> @@ -489,6 +489,7 @@ choice
>>>
>>> config MACH_SAMA5D4EK
>>> bool "Atmel SAMA5D4 Evaluation Kit"
>>> + select HAVE_DEFAULT_ENVIRONMENT_NEW
>>> help
>>> Select this if you are using Atmel's SAMA5D4-EK Evaluation Kit.
>>>
>>>
>>
>> Best Regards,
>> Bo Shen
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
