The main idea behind this patch is to avoid redundant board code.
Because of the module similarities of all am335x based phytec boards, we can
merge its code.
The phytec-som-am335x merges the code of all am335x based phytec SOMs.
So we will have only one "board" in the barebox for phyCORE, phyFLEX.
Signed-off-by: Wadim Egorov <w.egorov@xxxxxxxxx>
---
arch/arm/boards/Makefile | 1 +
arch/arm/boards/phytec-som-am335x/Makefile | 3 +
arch/arm/boards/phytec-som-am335x/board.c | 104 ++++++++++++++
.../defaultenv-physom-am335x/boot/mmc | 8 ++
.../defaultenv-physom-am335x/boot/nand | 8 ++
.../defaultenv-physom-am335x/boot/spi | 9 ++
.../defaultenv-physom-am335x/init/bootsource | 15 ++
.../defaultenv-physom-am335x/nv/bootargs.base | 1 +
arch/arm/boards/phytec-som-am335x/lowlevel.c | 133 ++++++++++++++++++
arch/arm/boards/phytec-som-am335x/ram-timings.h | 154 +++++++++++++++++++++
arch/arm/configs/am335x_defconfig | 1 +
arch/arm/configs/am335x_mlo_defconfig | 1 +
arch/arm/dts/Makefile | 1 +
arch/arm/mach-omap/Kconfig | 6 +
images/Makefile.am33xx | 36 +++++
15 files changed, 481 insertions(+)
create mode 100644 arch/arm/boards/phytec-som-am335x/Makefile
create mode 100644 arch/arm/boards/phytec-som-am335x/board.c
create mode 100644 arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc
create mode 100644 arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/nand
create mode 100644 arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/spi
create mode 100644 arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/init/bootsource
create mode 100644 arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/nv/bootargs.base
create mode 100644 arch/arm/boards/phytec-som-am335x/lowlevel.c
create mode 100644 arch/arm/boards/phytec-som-am335x/ram-timings.h
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 9961ca8..88de2b6 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -80,6 +80,7 @@ obj-$(CONFIG_MACH_PCM043) += phytec-phycore-imx35/
obj-$(CONFIG_MACH_PCM049) += phytec-phycore-omap4460/
obj-$(CONFIG_MACH_PCM051) += phytec-phycore-am335x/
obj-$(CONFIG_MACH_PFLA03) += phytec-phyflex-am335x/
+obj-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += phytec-som-am335x/
obj-$(CONFIG_MACH_PHYTEC_PFLA02) += phytec-phyflex-imx6/
obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += plathome-openblocks-ax3/
obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += plathome-openblocks-a6/
diff --git a/arch/arm/boards/phytec-som-am335x/Makefile b/arch/arm/boards/phytec-som-am335x/Makefile
new file mode 100644
index 0000000..78397bd
--- /dev/null
+++ b/arch/arm/boards/phytec-som-am335x/Makefile
@@ -0,0 +1,3 @@
+lwl-y += lowlevel.o
+obj-y += board.o
+bbenv-y += defaultenv-physom-am335x
diff --git a/arch/arm/boards/phytec-som-am335x/board.c b/arch/arm/boards/phytec-som-am335x/board.c
new file mode 100644
index 0000000..d084898
--- /dev/null
+++ b/arch/arm/boards/phytec-som-am335x/board.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2015 Wadim Egorov, PHYTEC Messtechnik GmbH
+ *
+ * Device initialization for the following modules and board variants:
+ * - phyCORE: PCM-953, phyBOARD-MAIA, phyBOARD-WEGA
+ * - phyFLEX: PBA-B-01
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <bootsource.h>
+#include <common.h>
+#include <nand.h>
+#include <init.h>
+#include <io.h>
+#include <linux/sizes.h>
+#include <envfs.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
+#include <mach/am33xx-generic.h>
+#include <mach/am33xx-silicon.h>
+#include <mach/bbu.h>
+
+static int physom_coredevice_init(void)
+{
+ if (!of_machine_is_compatible("phytec,am335x-som"))
+ return 0;
+
+ am33xx_register_ethaddr(0, 0);
+
+ return 0;
+}
+coredevice_initcall(physom_coredevice_init);
+
+static struct omap_barebox_part physom_barebox_part = {
+ .nand_offset = SZ_512K,
+ .nand_size = SZ_512K,
+ .nor_offset = SZ_128K,
+ .nor_size = SZ_512K,
+};
+
+static char *xloadslots[] = {
+ "/dev/nand0.xload.bb",
+ "/dev/nand0.xload_backup1.bb",
+ "/dev/nand0.xload_backup2.bb",
+ "/dev/nand0.xload_backup3.bb"
+};
+
+static int physom_devices_init(void)
+{
+ if (!of_machine_is_compatible("phytec,am335x-som"))
+ return 0;
+
+ switch (bootsource_get()) {
+ case BOOTSOURCE_SPI:
+ of_device_enable_path("/chosen/environment-spi");
+ break;
+ case BOOTSOURCE_MMC:
+ omap_set_bootmmc_devname("mmc0");
+ break;
+ default:
+ of_device_enable_path("/chosen/environment-nand");
+ break;
+ }
+
+ omap_set_barebox_part(&physom_barebox_part);
+ defaultenv_append_directory(defaultenv_physom_am335x);
+
+ /* Special module set up */
+ if (of_machine_is_compatible("phytec,phycore-am335x-som")) {
+ armlinux_set_architecture(MACH_TYPE_PCM051);
+ barebox_set_hostname("pcm051");
+ }
+
+ if (of_machine_is_compatible("phytec,phyflex-am335x-som")) {
+ armlinux_set_architecture(MACH_TYPE_PFLA03);
+ am33xx_select_rmii2_crs_dv();
+ barebox_set_hostname("pfla03");
+ }
+
+ /* Register update handler */
+ am33xx_bbu_spi_nor_mlo_register_handler("MLO.spi", "/dev/m25p0.xload");
+ am33xx_bbu_spi_nor_register_handler("spi", "/dev/m25p0.barebox");
+ am33xx_bbu_nand_xloadslots_register_handler("MLO.nand",
+ xloadslots, ARRAY_SIZE(xloadslots));
+ am33xx_bbu_nand_register_handler("nand", "/dev/nand0.barebox.bb");
+
+ if (IS_ENABLED(CONFIG_SHELL_NONE))
+ return am33xx_of_register_bootdevice();
+
+ return 0;
+}
+device_initcall(physom_devices_init);
diff --git a/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc b/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc
new file mode 100644
index 0000000..1a642f9
--- /dev/null
+++ b/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/mmc
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+global.bootm.image=/boot/linuximage
+global.bootm.oftree=/boot/oftree
+
+bootargs-ip
+
+global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rootfstype=ext3 rw rootwait"
diff --git a/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/nand b/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/nand
new file mode 100644
index 0000000..c6e49be
--- /dev/null
+++ b/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/nand
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+global.bootm.image="/dev/nand0.kernel.bb"
+global.bootm.oftree="/dev/nand0.oftree.bb"
+
+bootargs-ip
+
+global.linux.bootargs.dyn.root="root=ubi0:root ubi.mtd=root rw rootfstype=ubifs"
diff --git a/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/spi b/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/spi
new file mode 100644
index 0000000..a9c0fe8
--- /dev/null
+++ b/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/boot/spi
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+global.bootm.image="/dev/m25p0.kernel"
+global.bootm.oftree="/dev/m25p0.oftree"
+
+bootargs-ip
+
+# Use rootfs from NAND
+global.linux.bootargs.dyn.root="root=ubi0:root ubi.mtd=nand0.root,2048 rw rootfstype=ubifs"
diff --git a/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/init/bootsource b/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/init/bootsource
new file mode 100644
index 0000000..3f2ff4b
--- /dev/null
+++ b/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/init/bootsource
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+if [ -n "$nv.boot.default" ]; then
+ exit
+fi
+
+if [ $bootsource = mmc ]; then
+ global.boot.default="mmc nand spi net"
+elif [ $bootsource = nand ]; then
+ global.boot.default="nand spi mmc net"
+elif [ $bootsource = spi ]; then
+ global.boot.default="spi nand mmc net"
+elif [ $bootsource = net ]; then
+ global.boot.default="net nand spi mmc"
+fi
diff --git a/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/nv/bootargs.base b/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/nv/bootargs.base
new file mode 100644
index 0000000..d7b01a1
--- /dev/null
+++ b/arch/arm/boards/phytec-som-am335x/defaultenv-physom-am335x/nv/bootargs.base
@@ -0,0 +1 @@
+console=ttyO0,115200
diff --git a/arch/arm/boards/phytec-som-am335x/lowlevel.c b/arch/arm/boards/phytec-som-am335x/lowlevel.c
new file mode 100644
index 0000000..87ad1f3
--- /dev/null
+++ b/arch/arm/boards/phytec-som-am335x/lowlevel.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) 2015 Wadim Egorov, PHYTEC Messtechnik GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <linux/sizes.h>
+#include <io.h>
+#include <init.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+#include <mach/am33xx-silicon.h>
+#include <mach/am33xx-clock.h>
+#include <mach/generic.h>
+#include <mach/sdrc.h>
+#include <mach/sys_info.h>
+#include <mach/syslib.h>
+#include <mach/am33xx-mux.h>
+#include <mach/am33xx-generic.h>
+#include <mach/wdt.h>
+#include <debug_ll.h>
+
+#include "ram-timings.h"
+
+#define CLK_M_OSC_MHZ 25
+#define DDR_IOCTRL 0x18B
+
+static const struct am33xx_cmd_control physom_cmd = {
+ .slave_ratio0 = 0x80,
+ .dll_lock_diff0 = 0x0,
+ .invert_clkout0 = 0x0,
+ .slave_ratio1 = 0x80,
+ .dll_lock_diff1 = 0x0,
+ .invert_clkout1 = 0x0,
+ .slave_ratio2 = 0x80,
+ .dll_lock_diff2 = 0x0,
+ .invert_clkout2 = 0x0,
+};
+
+/**
+ * @brief The basic entry point for board initialization.
+ *
+ * This is called as part of machine init (after arch init).
+ * This is again called with stack in SRAM, so not too many
+ * constructs possible here.
+ *
+ * @return void
+ */
+static noinline void physom_board_init(int sdram, void *fdt)
+{
+ struct am335x_sdram_timings *timing = &physom_timings[sdram];
+
+ /*
+ * WDT1 is already running when the bootloader gets control
+ * Disable it to avoid "random" resets
+ */
+ writel(WDT_DISABLE_CODE1, AM33XX_WDT_REG(WSPR));
+ while (readl(AM33XX_WDT_REG(WWPS)) != 0x0);
+
+
+ writel(WDT_DISABLE_CODE2, AM33XX_WDT_REG(WSPR));
+ while (readl(AM33XX_WDT_REG(WWPS)) != 0x0);
+
+ am33xx_pll_init(MPUPLL_M_600, CLK_M_OSC_MHZ, DDRPLL_M_400);
+
+ am335x_sdram_init(DDR_IOCTRL, &physom_cmd,
+ &timing->regs,
+ &timing->data);
+
+ am33xx_uart_soft_reset((void *)AM33XX_UART0_BASE);
+ am33xx_enable_uart0_pin_mux();
+ omap_uart_lowlevel_init((void *)AM33XX_UART0_BASE);
+ putc_ll('>');
+
+ am335x_barebox_entry(fdt);
+}
+
+static noinline void physom_board_entry(unsigned long bootinfo, int sdram, void *fdt)
+{
+ am33xx_save_bootinfo((void *)bootinfo);
+
+ arm_cpu_lowlevel_init();
+
+ /*
+ * Setup C environment, the board init code uses global variables.
+ * Stackpointer has already been initialized by the ROM code.
+ */
+ relocate_to_current_adr();
+ setup_c();
+
+ physom_board_init(sdram, fdt);
+}
+
+#define PHYTEC_ENTRY_MLO(name, fdt_name, sdram) \
+ ENTRY_FUNCTION(name, bootinfo, r1, r2) \
+ { \
+ extern char __dtb_##fdt_name##_start[]; \
+ void *fdt =__dtb_##fdt_name##_start - \
+ get_runtime_offset(); \
+ physom_board_entry(bootinfo, sdram, fdt); \
+ }
+
+#define PHYTEC_ENTRY(name, fdt_name) \
+ ENTRY_FUNCTION(name, r0, r1, r2) \
+ { \
+ extern char __dtb_##fdt_name##_start[]; \
+ void *fdt =__dtb_##fdt_name##_start - \
+ get_runtime_offset(); \
+ am335x_barebox_entry(fdt); \
+ }
+
+/* phycore-som */
+PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_128mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J64M1615IT_128MB);
+PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_256mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J128M16125IT_256MB);
+PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_512mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J256M16HA15EIT_512MB);
+PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_2x512mb, am335x_phytec_phycore_som_mlo, PHYCORE_MT41J512M8125IT_2x512MB);
+PHYTEC_ENTRY(start_am33xx_phytec_phycore_sdram, am335x_phytec_phycore_som);
+PHYTEC_ENTRY(start_am33xx_phytec_phycore_no_spi_sdram, am335x_phytec_phycore_som_no_spi);
+
+/* phyflex-som */
+PHYTEC_ENTRY_MLO(start_am33xx_phytec_phyflex_sram_256mb, am335x_phytec_phyflex_som_mlo, PHYFLEX_MT41K128M16JT_256MB);
+PHYTEC_ENTRY_MLO(start_am33xx_phytec_phyflex_sram_512mb, am335x_phytec_phyflex_som_mlo, PHYFLEX_MT41K256M16HA_512MB);
+PHYTEC_ENTRY(start_am33xx_phytec_phyflex_sdram, am335x_phytec_phyflex_som);
diff --git a/arch/arm/boards/phytec-som-am335x/ram-timings.h b/arch/arm/boards/phytec-som-am335x/ram-timings.h
new file mode 100644
index 0000000..6d1993e
--- /dev/null
+++ b/arch/arm/boards/phytec-som-am335x/ram-timings.h
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2015 Wadim Egorov, PHYTEC Messtechnik GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __RAM_TIMINGS_H
+#define __RAM_TIMINGS_H
+
+struct am335x_sdram_timings {
+ struct am33xx_emif_regs regs;
+ struct am33xx_ddr_data data;
+};
+
+enum {
+ PHYFLEX_MT41K128M16JT_256MB,
+ PHYFLEX_MT41K256M16HA_512MB,
+
+ PHYCORE_MT41J128M16125IT_256MB,
+ PHYCORE_MT41J64M1615IT_128MB,
+ PHYCORE_MT41J256M16HA15EIT_512MB,
+ PHYCORE_MT41J512M8125IT_2x512MB,
+};
+
+struct am335x_sdram_timings physom_timings[] = {
+ /* 256 MB */
+ [PHYFLEX_MT41K128M16JT_256MB] = {
+ .regs = {
+ .emif_read_latency = 0x7,
+ .emif_tim1 = 0x0AAAD4DB,
+ .emif_tim2 = 0x26437FDA,
+ .emif_tim3 = 0x501F83FF,
+ .sdram_config = 0x61C052B2,
+ .zq_config = 0x50074BE4,
+ .sdram_ref_ctrl = 0x00000C30,
+ },
+ .data = {
+ .rd_slave_ratio0 = 0x34,
+ .wr_dqs_slave_ratio0 = 0x47,
+ .fifo_we_slave_ratio0 = 0x9a,
+ .wr_slave_ratio0 = 0x7e,
+ .use_rank0_delay = 0x0,
+ .dll_lock_diff0 = 0x0,
+ },
+ },
+
+ /* 512 MB */
+ [PHYFLEX_MT41K256M16HA_512MB] = {
+ .regs = {
+ .emif_read_latency = 0x7,
+ .emif_tim1 = 0x0AAAE4DB,
+ .emif_tim2 = 0x266B7FDA,
+ .emif_tim3 = 0x501F867F,
+ .sdram_config = 0x61C05332,
+ .zq_config = 0x50074BE4,
+ .sdram_ref_ctrl = 0x00000C30,
+ },
+ .data = {
+ .rd_slave_ratio0 = 0x36,
+ .wr_dqs_slave_ratio0 = 0x47,
+ .fifo_we_slave_ratio0 = 0x95,
+ .wr_slave_ratio0 = 0x7f,
+ .use_rank0_delay = 0x0,
+ .dll_lock_diff0 = 0x0,
+ },
+ },
+
+ /* 256MB */
+ [PHYCORE_MT41J128M16125IT_256MB] = {
+ .regs = {
+ .emif_read_latency = 0x7,
+ .emif_tim1 = 0x0AAAD4DB,
+ .emif_tim2 = 0x26437FDA,
+ .emif_tim3 = 0x501F83FF,
+ .sdram_config = 0x61C052B2,
+ .zq_config = 0x50074BE4,
+ .sdram_ref_ctrl = 0x00000C30,
+ },
+ .data = {
+ .rd_slave_ratio0 = 0x3B,
+ .wr_dqs_slave_ratio0 = 0x33,
+ .fifo_we_slave_ratio0 = 0x9c,
+ .wr_slave_ratio0 = 0x6f,
+ },
+ },
+
+ /* 128MB */
+ [PHYCORE_MT41J64M1615IT_128MB] = {
+ .regs = {
+ .emif_read_latency = 0x7,
+ .emif_tim1 = 0x0AAAE4DB,
+ .emif_tim2 = 0x262F7FDA,
+ .emif_tim3 = 0x501F82BF,
+ .sdram_config = 0x61C05232,
+ .zq_config = 0x50074BE4,
+ .sdram_ref_ctrl = 0x00000C30,
+ },
+ .data = {
+ .rd_slave_ratio0 = 0x38,
+ .wr_dqs_slave_ratio0 = 0x34,
+ .fifo_we_slave_ratio0 = 0xA2,
+ .wr_slave_ratio0 = 0x72,
+ },
+ },
+
+ /* 512MB */
+ [PHYCORE_MT41J256M16HA15EIT_512MB] = {
+ .regs = {
+ .emif_read_latency = 0x7,
+ .emif_tim1 = 0x0AAAE4DB,
+ .emif_tim2 = 0x266B7FDA,
+ .emif_tim3 = 0x501F867F,
+ .sdram_config = 0x61C05332,
+ .zq_config = 0x50074BE4,
+ .sdram_ref_ctrl = 0x00000C30
+ },
+ .data = {
+ .rd_slave_ratio0 = 0x35,
+ .wr_dqs_slave_ratio0 = 0x43,
+ .fifo_we_slave_ratio0 = 0x97,
+ .wr_slave_ratio0 = 0x7b,
+ },
+ },
+
+ /* 1024MB */
+ [PHYCORE_MT41J512M8125IT_2x512MB] = {
+ .regs = {
+ .emif_read_latency = 0x7,
+ .emif_tim1 = 0x0AAAE4DB,
+ .emif_tim2 = 0x266B7FDA,
+ .emif_tim3 = 0x501F867F,
+ .sdram_config = 0x61C053B2,
+ .zq_config = 0x50074BE4,
+ .sdram_ref_ctrl = 0x00000C30
+ },
+ .data = {
+ .rd_slave_ratio0 = 0x32,
+ .wr_dqs_slave_ratio0 = 0x48,
+ .fifo_we_slave_ratio0 = 0x99,
+ .wr_slave_ratio0 = 0x80,
+ },
+ },
+};
+
+#endif
diff --git a/arch/arm/configs/am335x_defconfig b/arch/arm/configs/am335x_defconfig
index e9bc1ba..5387548 100644
--- a/arch/arm/configs/am335x_defconfig
+++ b/arch/arm/configs/am335x_defconfig
@@ -6,6 +6,7 @@ CONFIG_MACH_AFI_GF=y
CONFIG_MACH_BEAGLEBONE=y
CONFIG_MACH_PCM051=y
CONFIG_MACH_PFLA03=y
+CONFIG_MACH_PHYTEC_SOM_AM335X=y
CONFIG_THUMB2_BAREBOX=y
CONFIG_ARM_BOARD_APPEND_ATAG=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
diff --git a/arch/arm/configs/am335x_mlo_defconfig b/arch/arm/configs/am335x_mlo_defconfig
index 9734da6..c06519c 100644
--- a/arch/arm/configs/am335x_mlo_defconfig
+++ b/arch/arm/configs/am335x_mlo_defconfig
@@ -6,6 +6,7 @@ CONFIG_MACH_AFI_GF=y
CONFIG_MACH_BEAGLEBONE=y
CONFIG_MACH_PCM051=y
CONFIG_MACH_PFLA03=y
+CONFIG_MACH_PHYTEC_SOM_AM335X=y
CONFIG_THUMB2_BAREBOX=y
# CONFIG_MEMINFO is not set
CONFIG_MMU=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e87e612..a228b2d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -30,6 +30,7 @@ pbl-dtb-$(CONFIG_MACH_PCAAXL3) += imx6q-phytec-pbaa03.dtb.o
pbl-dtb-$(CONFIG_MACH_PCM038) += imx27-phytec-phycore-rdk.dtb.o
pbl-dtb-$(CONFIG_MACH_PCM051) += am335x-phytec-phycore-som.dtb.o am335x-phytec-phycore-som-no-spi.dtb.o am335x-phytec-phycore-som-mlo.dtb.o
pbl-dtb-$(CONFIG_MACH_PFLA03) += am335x-phytec-phyflex-som.dtb.o am335x-phytec-phyflex-som-mlo.dtb.o
+pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += am335x-phytec-phyflex-som.dtb.o am335x-phytec-phyflex-som-mlo.dtb.o am335x-phytec-phycore-som.dtb.o am335x-phytec-phycore-som-no-spi.dtb.o am335x-phytec-phycore-som-mlo.dtb.o
pbl-dtb-$(CONFIG_MACH_PHYTEC_PFLA02) += imx6s-phytec-pbab01.dtb.o imx6dl-phytec-pbab01.dtb.o imx6q-phytec-pbab01.dtb.o imx6q-phytec-phyboard-alcor.dtb.o imx6dl-phytec-phyboard-subra.dtb.o
pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += kirkwood-openblocks_a6-bb.dtb.o
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index 7aa37eb..32efe5c 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -158,6 +158,12 @@ config MACH_PFLA03
select ARCH_AM33XX
help
Say Y here if you are using Phytecs phyFLEX pfla03 board
+
+config MACH_PHYTEC_SOM_AM335X
+ bool "Phytec AM335X SOMs"
+ select ARCH_AM33XX
+ help
+ Say Y here if you are using a am335x based Phytecs SOM
endif
choice
diff --git a/images/Makefile.am33xx b/images/Makefile.am33xx
index 002c103..75dfb9a 100644
--- a/images/Makefile.am33xx
+++ b/images/Makefile.am33xx
@@ -51,6 +51,42 @@ pblx-$(CONFIG_MACH_PFLA03) += start_am33xx_phytec_phyflex_sram_512mb
FILE_barebox-am33xx-phytec-phyflex-mlo-512mb.img = start_am33xx_phytec_phyflex_sram_512mb.pblx.mlo
am33xx-mlo-$(CONFIG_MACH_PFLA03) += barebox-am33xx-phytec-phyflex-mlo-512mb.img
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_sdram
+FILE_barebox-am33xx-phytec-phycore.img = start_am33xx_phytec_phycore_sdram.pblx
+am33xx-barebox-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore.img
+
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_no_spi_sdram
+FILE_barebox-am33xx-phytec-phycore-no-spi.img = start_am33xx_phytec_phycore_no_spi_sdram.pblx
+am33xx-barebox-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-no-spi.img
+
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_sram_256mb
+FILE_barebox-am33xx-phytec-phycore-mlo-256mb.img = start_am33xx_phytec_phycore_sram_256mb.pblx.mlo
+am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-256mb.img
+
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_sram_128mb
+FILE_barebox-am33xx-phytec-phycore-mlo-128mb.img = start_am33xx_phytec_phycore_sram_128mb.pblx.mlo
+am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-128mb.img
+
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_sram_512mb
+FILE_barebox-am33xx-phytec-phycore-mlo-512mb.img = start_am33xx_phytec_phycore_sram_512mb.pblx.mlo
+am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-512mb.img
+
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_sram_2x512mb
+FILE_barebox-am33xx-phytec-phycore-mlo-2x512mb.img = start_am33xx_phytec_phycore_sram_2x512mb.pblx.mlo
+am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-mlo-2x512mb.img
+
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phyflex_sdram
+FILE_barebox-am33xx-phytec-phyflex.img = start_am33xx_phytec_phyflex_sdram.pblx
+am33xx-barebox-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phyflex.img
+
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phyflex_sram_256mb
+FILE_barebox-am33xx-phytec-phyflex-mlo-256mb.img = start_am33xx_phytec_phyflex_sram_256mb.pblx.mlo
+am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phyflex-mlo-256mb.img
+
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phyflex_sram_512mb
+FILE_barebox-am33xx-phytec-phyflex-mlo-512mb.img = start_am33xx_phytec_phyflex_sram_512mb.pblx.mlo
+am33xx-mlo-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phyflex-mlo-512mb.img
+
pblx-$(CONFIG_MACH_BEAGLEBONE) += start_am33xx_beaglebone_sdram
FILE_barebox-am33xx-beaglebone.img = start_am33xx_beaglebone_sdram.pblx
am33xx-barebox-$(CONFIG_MACH_BEAGLEBONE) += barebox-am33xx-beaglebone.img
--
1.9.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
