The created device name for atmel udc is at91_udc while not
at91_udc0.
Signed-off-by: Bo Shen <voice.shen@xxxxxxxxx>
---
arch/arm/boards/at91sam9n12ek/env/bin/init_board | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boards/at91sam9n12ek/env/bin/init_board b/arch/arm/boards/at91sam9n12ek/env/bin/init_board
index 6b44044..4931342 100644
--- a/arch/arm/boards/at91sam9n12ek/env/bin/init_board
+++ b/arch/arm/boards/at91sam9n12ek/env/bin/init_board
@@ -12,7 +12,7 @@ button_wait=5
dfu_config="/dev/nand0.barebox.bb(barebox)sr,/dev/nand0.kernel.bb(kernel)r,/dev/nand0.rootfs.bb(rootfs)r"
-if [ $at91_udc0.vbus != 1 ]
+if [ $at91_udc.vbus != 1 ]
then
echo "No USB Device cable plugged, normal boot"
exit
@@ -30,7 +30,7 @@ fi
echo "${button_name} pressed detected wait ${button_wait}s"
timeout -s -a ${button_wait}
-if [ $at91_udc0.vbus != 1 ]
+if [ $at91_udc.vbus != 1 ]
then
echo "No USB Device cable plugged, normal boot"
exit
--
2.3.0.rc0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
