On Thu, Jan 29, 2015 at 04:43:17PM +0100, Michael Grzeschik wrote: > From: Jan Luebbe <jlu@xxxxxxxxxxxxxx> > > Signed-off-by: Jan Luebbe <jlu@xxxxxxxxxxxxxx> > --- > drivers/mfd/Kconfig | 4 + > drivers/mfd/Makefile | 1 + > drivers/mfd/da9053.c | 360 +++++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 365 insertions(+) > create mode 100644 drivers/mfd/da9053.c > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 3af904d..3d230f1 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -4,6 +4,10 @@ config MFD_ACT8846 > depends on I2C > bool "ACT8846 driver" > > +config MFD_DA9053 > + depends on I2C > + bool "DA9053 PMIC driver" You either need a "depends on WATCHDOG" or a if (IS_ENABLED(CONFIG_WATCHDOG) in your code. What do the "shutdown" and "faultlog" parameters do? At least a comment in the code, better in the documentation would be good. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox