Sorry, this was more me not understanding "git send-email" the first time and how to keep it only sending the latest commit. Doug On Tue, Feb 10, 2015 at 6:30 PM, Bo Shen <voice.shen@xxxxxxxxx> wrote: > Hi Doug Brainard, > > On 02/10/2015 10:28 PM, Doug Brainard wrote: >> >> --- >> arch/arm/boards/sama5d4ek/env/config | 14 +++++++------- >> 1 file changed, 7 insertions(+), 7 deletions(-) > > > As this file will be totally discard in patch 2/2. So, I think no need to > add this patch. And also it change the default boot setting to Android only. > > >> diff --git a/arch/arm/boards/sama5d4ek/env/config >> b/arch/arm/boards/sama5d4ek/env/config >> index 1007345..ee86c07 100644 >> --- a/arch/arm/boards/sama5d4ek/env/config >> +++ b/arch/arm/boards/sama5d4ek/env/config >> @@ -11,16 +11,16 @@ ip=dhcp >> #eth0.serverip=a.b.c.d >> >> # can be either 'nfs', 'tftp', 'nor' or 'nand' >> -kernel_loc=nfs >> +kernel_loc=nand >> # can be either 'net', 'nor', 'nand' or 'initrd' >> -rootfs_loc=net >> +rootfs_loc=nand >> # can be either 'nfs', 'tftp', 'nand' or empty >> -oftree_loc=nfs >> +oftree_loc=nand >> >> # can be either 'jffs2' or 'ubifs' >> rootfs_type=ubifs >> rootfsimage=root.$rootfs_type >> -ubiroot=rootfs >> +ubiroot=system >> >> # The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo >> kernelimage=zImage >> @@ -29,14 +29,14 @@ kernelimage=zImage >> #kernelimage=Image.lzo >> >> nand_device=atmel_nand >> >> -nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),-(rootfs)" >> -rootfs_mtdblock_nand=7 >> >> +nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),8M(recovery),176M(system),304M(userdata),-(cache)" >> +rootfs_mtdblock_nand=10 >> >> >> m25p80_parts="64k(bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)" >> >> autoboot_timeout=3 >> >> -bootargs="console=ttyS0,115200" >> +bootargs="console=ttyS0,115200 ubi.mtd=8 ubi.mtd=9 init=/init >> androidboot.hardware=sama5-pda androidboot.lcd=wvga" >> >> # set a fancy prompt (if support is compiled in) >> PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# " >> > > Best Regards, > Bo Shen _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
