Linux Tegra Development

• Thread Index

• [RFC PATCH] ASoC: core: Optimise suspend/resume of DAPM widgets
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [GIT PULL 5/5] arm64: tegra: Device tree changes for v4.19-rc1
  • From: Anthony Eden <aeden@xxxxxxxxxxxxx>
• Re: [GIT PULL 5/5] arm64: tegra: Device tree changes for v4.19-rc1
  • From: Anthony Eden <aeden@xxxxxxxxxxxxx>
• Re: [PATCH v1] gpu: host1x: Ignore clients initialization failure
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v1] gpu: host1x: Ignore clients initialization failure
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [GIT PULL 5/5] arm64: tegra: Device tree changes for v4.19-rc1
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
  • From: "David R. Piegdon" <lkml@xxxxxxxx>
• Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
  • From: Nicolas Chauvet <kwizart@xxxxxxxxx>
• Re: [PATCH 1/3] soc/tegra: pmc: set IO pad power state and voltage via pinctrl fw
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/3] soc/tegra: pmc: set IO pad power state and voltage via pinctrl fw
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 7/8] clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v5 6/8] clk: tegra20: Turn EMC clock gate into divider
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
  • From: "David R. Piegdon" <lkml@xxxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 1/3] soc/tegra: pmc: set IO pad power state and voltage via pinctrl fw
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH 3/3] drm/tegra: sor: change io pad power state using new pmc api
  • From: Venkat Reddy Talla <vreddytalla@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: tegra: update PMC DT binding with io pads control
  • From: Venkat Reddy Talla <vreddytalla@xxxxxxxxxx>
• [PATCH 1/3] soc/tegra: pmc: set IO pad power state and voltage via pinctrl fw
  • From: Venkat Reddy Talla <vreddytalla@xxxxxxxxxx>
• Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH v1 2/2] gpio: tegra: Move driver registration to subsys_init level
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: tegra: readd gpio-ranges properties
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH] ARM: dts: paz00: fix wakeup gpio keycode
  • From: Marc Dietrich <marvin24@xxxxxx>
• Re: [PATCH 2/2] ARM: tegra: readd gpio-ranges properties
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: tegra: readd gpio-ranges properties
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH 2/2] ARM: tegra: readd gpio-ranges properties
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH 01/40] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 02/40] dt-bindings: mmc: tegra: Add pad voltage control properties
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 03/40] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 05/40] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 07/40] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 08/40] soc/tegra: pmc: Use X macro to generate IO pad tables
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 10/40] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 11/40] mmc: sdhci: Add a quirk to skip clearing the transfer mode register on tuning
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 12/40] mmc: tegra: Reconfigure pad voltages during voltage switching
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 13/40] mmc: tegra: Poll for calibration completion
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 14/40] mmc: tegra: Set calibration pad voltage reference
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 15/40] mmc: tegra: Power on the calibration pad
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 16/40] mmc: tegra: Disable card clock during pad calibration
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 17/40] mmc: tegra: Program pad autocal offsets from dt
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 18/40] mmc: tegra: Perform pad calibration after voltage switch
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 19/40] mmc: tegra: Enable pad calibration on Tegra210 and Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 20/40] mmc: tegra: Add a workaround for tap value change glitch
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 21/40] mmc: tegra: Parse default trim and tap from dt
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 22/40] mmc: tegra: Configure default tap values
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 23/40] mmc: tegra: Configure default trim value on reset
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 24/40] mmc: tegra: Use standard SDHCI tuning on Tegra210 and Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 26/40] mmc: tegra: Enable workaround for tuning transfer mode bug
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 25/40] mmc: sdhci: Add a quirk to disable card clock during tuning
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 27/40] mmc: tegra: Set SDHCI_QUIRK2_TUNE_DIS_CARD_CLK on Tegra210
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 29/40] mmc: tegra: Enable UHS and HS200 modes for Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 30/40] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 31/40] arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 32/40] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 33/40] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 35/40] arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 34/40] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 38/40] arm64: dts: tegra186: Add SDHCI tap and trim values
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 37/40] arm64: dts: tegra210: Add SDHCI tap and trim values
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 39/40] arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 40/40] arm64: dts: tegra210: Assign clocks for sdmmc1 and sdmmc4
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 36/40] arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 28/40] mmc: tegra: Enable UHS and HS200 modes for Tegra210
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 09/40] soc/tegra: pmc: Remove public pad voltage APIs
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 06/40] soc/tegra: pmc: Factor out DPD register bit calculation
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 04/40] dt-bindings: mmc: Add Tegra SDHCI sampling trimmer values
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 00/40] Tegra SDHCI add support for HS200 and UHS signaling
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v1] gpu: host1x: Ignore clients initialization failure
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v5 0/6] KASan for arm
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v5 0/6] KASan for arm
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/6] KASan for arm
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v5 0/6] KASan for arm
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: Tegra20 blank screen with grate driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Tegra20 blank screen with grate driver
  • From: Kyle Evans <kvans32@xxxxxxxxx>
• Re: [PATCH v5 0/6] KASan for arm
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 12/15] ARM: tegra: apalis-tk1: add toradex,apalis-tk1-v1.2 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 28/28] ARM: tegra: apalis_t30: support v1.1 hardware revision
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] drm/tegra: Convert drm_atomic_helper_suspend/resume()
  • From: Souptick Joarder <jrdr.linux@xxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v1] media: staging: tegra-vde: Replace debug messages with trace points
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH v2 03/10] mmc: tegra: Reconfigure pad voltages during voltage switching
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH v2 03/10] mmc: tegra: Power on the calibration pad
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v2 00/10] Tegra SDHCI update the pad autocal procedure
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v2 03/10] mmc: tegra: Reconfigure pad voltages during voltage switching
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v2 05/10] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: mmc: tegra: Add nvidia,only-1-8-v property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 01/10] dt-bindings: mmc: tegra: Add pad voltage control properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [Linux-kernel] [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [Linux-kernel] [PATCH 0/4] ASoC: Tegra30 TDM support
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/10] Tegra SDHCI update the pad autocal procedure
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Tegra SDHCI update the pad autocal procedure
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH v6 2/7] soc/tegra: pmc: Factor out DPD register bit calculation
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 1/7] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 7/7] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 6/7] soc/tegra: pmc: Remove public pad voltage APIs
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 4/7] soc/tegra: pmc: Use X macro to generate IO pad tables
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 0/7] Tegra PMC pinctrl pad configuration
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Applied "ASoC: tegra: i2s: Fix typo/broken macro" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/4] ASoC: tegra: i2s: Add support for more than 2 channels
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/4] ASoC: tegra: i2s: Add support for more than 2 channels
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH] pci: disable nv_msi_ht_cap_quirk_leaf quirk on non-x86 hw
  • From: Nicolas Chauvet <kwizart@xxxxxxxxx>
• Re: [alsa-devel] [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
  • From: Ben Dooks <ben@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 1/4] ASoC: tegra: i2s: Fix typo/broken macro
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ASoC: tegra_alc5632: fix device_node refcounting
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] ASoC: tegra_alc5632: fix device_node refcounting
  • From: Marc Dietrich <marvin24@xxxxxx>
• Re: [PATCH] gpio: tegra: drop tegra specific GPIO lockdep classes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: tegra: define GPIO compatible node per SoC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] gpiolib: probe deferral error reporting
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] gpio: tegra: Fix tegra_gpio_irq_set_type()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [Linux-kernel] [PATCH 3/4] ASoC: tegra: Allow 32-bit and 24-bit samples
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] ASoC: tegra: Allow 32-bit and 24-bit samples
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH] ASoC: tegra_alc5632: fix device_node refcounting
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH 3/4] ASoC: tegra: Allow 32-bit and 24-bit samples
  • From: Jorge Sanjuan <jorge.sanjuan@xxxxxxxxxxxxxxx>
• [PATCH 0/4] ASoC: Tegra30 TDM support
  • From: Jorge Sanjuan <jorge.sanjuan@xxxxxxxxxxxxxxx>
• [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
  • From: Jorge Sanjuan <jorge.sanjuan@xxxxxxxxxxxxxxx>
• [PATCH 4/4] ASoC: tegra: i2s: Add support for more than 2 channels
  • From: Jorge Sanjuan <jorge.sanjuan@xxxxxxxxxxxxxxx>
• [PATCH 1/4] ASoC: tegra: i2s: Fix typo/broken macro
  • From: Jorge Sanjuan <jorge.sanjuan@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH v2 03/10] mmc: tegra: Reconfigure pad voltages during voltage switching
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [Linux-kernel] tegra clock updates and fixes
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: mmc: tegra: Add nvidia,only-1-8-v property
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH v1] iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH v2] mfd: as3722: disable auto power on when AC OK
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [RFC PATCH v1 2/6] of/device: Don't back devices DMA with IOMMU if that's undesired by driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [RFC PATCH v1 1/6] driver core: Add option for disabling of backing devices DMA with IOMMU
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [RFC PATCH v1 4/6] gpu: host1x: Avoid implicit DMA backing with IOMMU
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [RFC PATCH v1 6/6] Revert "drm/nouveau: tegra: Detach from ARM DMA/IOMMU mapping"
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [RFC PATCH v1 5/6] drm/nouveau: tegra: Universally avoid implicit DMA backing with IOMMU
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [RFC PATCH v1 3/6] drm/tegra: Avoid implicit DMA backing with IOMMU
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v1] iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH] clk: tegra: probe deferral error reporting
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH v2 2/2] clk: tegra: Correct clk_out_mux parents
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Stefan Agner <stefan@xxxxxxxx>
• [PATCH] gpio: tegra: drop tegra specific GPIO lockdep classes
  • From: Stefan Agner <stefan@xxxxxxxx>
• [PATCH 1/2] pinctrl: tegra: define GPIO compatible node per SoC
  • From: Stefan Agner <stefan@xxxxxxxx>
• [PATCH 2/2] ARM: tegra: readd gpio-ranges properties
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [Linux-kernel] tegra clock updates and fixes
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH] drm/tegra: return with probe defer if GPIO subsystem is not ready
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v2 03/10] mmc: tegra: Reconfigure pad voltages during voltage switching
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [Linux-kernel] tegra clock updates and fixes
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: mmc: tegra: Add nvidia,only-1-8-v property
  • From: Stefan Agner <stefan@xxxxxxxx>
• [PATCH v2 00/10] Tegra SDHCI update the pad autocal procedure
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 01/10] mmc: tegra: Poll for calibration completion
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 03/10] mmc: tegra: Power on the calibration pad
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 05/10] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 06/10] mmc: tegra: Program pad autocal offsets from dt
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 09/10] mmc: tegra: Perform pad calibration after voltage switch
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 08/10] arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 07/10] arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 10/10] mmc: tegra: Enable pad calibration on Tegra210 and Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 04/10] mmc: tegra: Disable card clock during pad calibration
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 02/10] mmc: tegra: Set calibration pad voltage reference
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 00/10] Tegra SDHCI enable 1.8 V signaling on Tegar210 and Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 03/10] mmc: tegra: Reconfigure pad voltages during voltage switching
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 02/10] dt-bindings: mmc: tegra: Add nvidia,only-1-8-v property
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 04/10] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 06/10] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 05/10] arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 07/10] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 10/10] arm64: dts: tegra186: Add nvidia,only-1-8-v to sdmmc4
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 09/10] arm64: dts: tegra210: Add nvidia,only-1-8-v to sdmmc4
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 08/10] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 01/10] dt-bindings: mmc: tegra: Add pad voltage control properties
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 1/7] clocksource/drivers: Set clockevent device cpumask to cpu_possible_mask
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: tegra20/tegra30: add pmu interrupt-affinity
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: tegra20: restore address order
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v2 1/2] clk: tegra: Fix const for clk_out parents
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] clk: tegra: Fix const for clk_out parents
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH v2 2/2] clk: tegra: Correct clk_out_mux parents
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH 13/26] ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH] clk: tegra: probe deferral error reporting
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH 13/15] ARM: tegra: apalis-tk1: fix pcie switch vendor compatible
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH] clk: tegra: probe deferral error reporting
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 02/15] ARM: tegra: apalis-tk1: reorder pcie properties
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH] clk: tegra: probe deferral error reporting
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH] clk: tegra: probe deferral error reporting
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 2/2] clk: tegra: Correct clk_out_mux parents
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 1/2] clk: tegra: Fix const for clk_out parents
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v6 4/4] clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v6 3/4] clk: tegra: Add sdmmc mux divider clock
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v6 2/4] clk: tegra: Refactor fractional divider calculation
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v6 1/4] clk: tegra: Fix includes required by fence_udelay()
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH v2] pinctrl: tegra: fix spelling in devicetree binding document
  • From: Rob Herring <robh@xxxxxxxxxx>
• [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH v3 2/2] Add support for CPCAP regulators on Motorola Xoom devices.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 00/10] Update the pad autocal procedure
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 10/10] mmc: tegra: Enable pad calibration on Tegra210 and Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH 00/10] Update the pad autocal procedure
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 15/26] ARM: tegra: colibri_t30: add i2c-thermtrip
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH 22/28] ARM: tegra: apalis_t30: add i2c-thermtrip
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH 09/10] mmc: tegra: Perform pad calibration after voltage switch
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH 02/10] mmc: tegra: Set calibration pad voltage reference
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH 01/28] ARM: tegra: apalis_t30: enable broken-hpi on emmc
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH 2/7] mmc: tegra: Reconfigure pad voltages during voltage switching
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH 09/10] mmc: tegra: Perform pad calibration after voltage switch
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 06/10] mmc: tegra: Program pad autocal offsets from dt
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 05/10] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 04/10] mmc: tegra: Disable card clock during pad calibration
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 03/10] mmc: tegra: Power on the calibration pad
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 02/10] mmc: tegra: Set calibration pad voltage reference
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 01/10] mmc: tegra: Poll for calibration completion
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 6/7] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 5/7] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 4/7] arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 3/7] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: Document Tegra SDHCI pinctrl bindings
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 2/7] mmc: tegra: Reconfigure pad voltages during voltage switching
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH v1] media: staging: tegra-vde: Replace debug messages with trace points
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v1] media: staging: tegra-vde: Replace debug messages with trace points
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH v1] media: staging: tegra-vde: Replace debug messages with trace points
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v1] media: staging: tegra-vde: Replace debug messages with trace points
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: RFC: tegra2/tegra3 automotive part changes
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v5 8/8] memory: tegra: Introduce Tegra20 EMC driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v5 7/8] clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v5 6/8] clk: tegra20: Turn EMC clock gate into divider
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v5 5/8] ARM: dts: tegra20: Add clock entry to External Memory Controller
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v5 4/8] ARM: dts: tegra20: Add interrupt entry to External Memory Controller
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v5 3/8] dt: bindings: Move tegra20-emc binding to memory-controllers directory
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v5 2/8] dt: bindings: tegra20-emc: Document clock property
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v5 1/8] dt: bindings: tegra20-emc: Document interrupt property
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v5 0/8] Tegra20 External Memory Controller driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v3 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 01/28] ARM: tegra: apalis_t30: enable broken-hpi on emmc
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 03/10] mmc: tegra: Power on the calibration pad
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 06/10] mmc: tegra: Program pad autocal offsets from dt
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 05/10] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 07/10] arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 09/10] mmc: tegra: Perform pad calibration after voltage switch
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 08/10] arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 04/10] mmc: tegra: Disable card clock during pad calibration
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 02/10] mmc: tegra: Set calibration pad voltage reference
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH 01/10] mmc: tegra: Poll for calibration completion
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 00/10] Update the pad autocal procedure
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH 01/28] ARM: tegra: apalis_t30: enable broken-hpi on emmc
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH 01/28] ARM: tegra: apalis_t30: enable broken-hpi on emmc
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 2/2] Add support for CPCAP regulators on Motorola Xoom devices.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v3 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v3 0/2] Add support for cpcap regulators on Tegra based Xoom devices.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2 v2] Add support for CPCAP regulators on Tegra devices.
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH 15/15] ARM: tegra: apalis-tk1: reorder SD card properties
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 14/15] ARM: tegra: apalis-tk1: reorder cpu dfll clock properties
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 13/15] ARM: tegra: apalis-tk1: fix pcie switch vendor compatible
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 12/15] ARM: tegra: apalis-tk1: add toradex,apalis-tk1-v1.2 compatible
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 11/15] ARM: tegra: apalis-tk1: enable emmc ddr52 mode
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 10/15] ARM: tegra: apalis-tk1: add proper emmc vmmc and vqmmc supplies
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 09/15] ARM: tegra: apalis-tk1: reorder backlight properties
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 08/15] ARM: tegra: apalis-tk1: white-space clean-up
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 04/15] ARM: tegra: apalis-tk1: reorder padctl properties
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 07/15] ARM: tegra: apalis-tk1: drop unused pinmux label
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 06/15] ARM: tegra: apalis-tk1: add missing regulators
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 05/15] ARM: tegra: apalis-tk1: regulator clean-up
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 01/15] ARM: tegra: apalis-tk1: add local-mac-address property
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 03/15] ARM: tegra: apalis-tk1: reorder host1x/hdmi properties
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 02/15] ARM: tegra: apalis-tk1: reorder pcie properties
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• Re: [PATCH] drm/tegra: hdmi: probe deferral error reporting
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• Re: [PATCH 2/2 v2] Add support for CPCAP regulators on Tegra devices.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 2/2 v2] Add support for CPCAP regulators on Tegra devices.
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] drm/tegra: hdmi: probe deferral error reporting
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 08/12] i2c: tegra: use core to detect 'no zero length' quirk
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH 2/2 v2] Add support for CPCAP regulators on Tegra devices.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH 1/2 v2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH 0/2 v2] Add support for cpcap regulators on Tegra devices.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] Add support for CPCAP regulators on Tegra devices.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH 0/2 V1] Add support for cpcap regulators on Tegra devices.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 03/26] ARM: tegra: colibri_t30: reorder host1x/hdmi properties
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 02/26] ARM: tegra: colibri_t30: add local-mac-address property
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 01/26] ARM: tegra: colibri_t30: enable broken-hpi on emmc
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 05/26] ARM: tegra: colibri_t30: add missing regulators
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 04/26] ARM: tegra: colibri_t30: regulator clean-up
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 06/26] ARM: tegra: colibri_t30: annotate uarts
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 08/26] ARM: tegra: colibri_t30: move dr_mode property from phy to controller
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 07/26] ARM: tegra: colibri_t30: white-space clean-up
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 09/26] ARM: tegra: colibri_t30: reorder backlight properties
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 10/26] ARM: tegra: colibri_t30: drop pwmleds
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 11/26] ARM: tegra: colibri_t30: pinmux clean-up
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 12/26] ARM: tegra: colibri_t30: add missing pinmux
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 13/26] ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 14/26] ARM: tegra: colibri_t30: further lm95245 temperature sensor annotation
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 16/26] ARM: tegra: colibri_t30: add proper emmc vmmc and vqmmc supplies
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 17/26] ARM: tegra: colibri_t30: enable emmc ddr52 mode
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 15/26] ARM: tegra: colibri_t30: add i2c-thermtrip
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 19/26] ARM: tegra: colibri_t30: line break long compatible property line
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 20/26] ARM: tegra: colibri_t30: move input include to carrier board
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 18/26] ARM: tegra: colibri_t30: rename clk to clock
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 24/26] ARM: tegra: colibri_t30: annotate sd card detect
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 23/26] ARM: tegra: colibri_t30: enable hda over hdmi
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 22/26] ARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 21/26] ARM: tegra: colibri_t30: remove unused nvidia,is-wired property
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 25/26] ARM: tegra: colibri_t30: annotate ehci instance 1
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 26/26] ARM: tegra: colibri_t30: update compatibility comment
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• Re: [RESEND] stable request: 4.4.y: 797097301860 ("clk: tegra: Fix PLL_U post divider and initial rate on Tegra30")
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/8] clk: tegra: host1x has fractional divider
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] clk: tegra: host1x has fractional divider
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] apalis_t30: fix can2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RESEND] stable request: 4.4.y: 797097301860 ("clk: tegra: Fix PLL_U post divider and initial rate on Tegra30")
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: stable request: 4.4.y: 797097301860 ("clk: tegra: Fix PLL_U post divider and initial rate on Tegra30")
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [RESEND] stable request: 4.4.y: 797097301860 ("clk: tegra: Fix PLL_U post divider and initial rate on Tegra30")
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• stable request: 4.4.y: 797097301860 ("clk: tegra: Fix PLL_U post divider and initial rate on Tegra30")
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] apalis_t30: fix can2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] clk: tegra: host1x has fractional divider
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] clk: tegra: fix fractional clocks for VDI, VI, EPP, MPE, 2D and 3D
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH 2/8] clk: tegra: host1x has fractional divider
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 03/28] ARM: tegra: apalis_t30: pull-up sd card detect pins
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 09/28] ARM: tegra: apalis_t30: add missing regulators
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 08/28] ARM: tegra: apalis_t30: regulator clean-up
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 07/28] ARM: tegra: apalis_t30: reorder host1x/hdmi properties
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 06/28] ARM: tegra: apalis_t30: annotate pcie port nodes
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 04/28] ARM: tegra: apalis_t30: add local-mac-address property
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 02/28] ARM: tegra: apalis_t30: fix mmc1 cmd pull-up
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 00/28] ARM: dts: tegra: apalis_t30: major revamp incl. v1.1 hardware support
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 10/28] ARM: tegra: apalis_t30: annotate uarts
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 15/28] ARM: tegra: apalis_t30: move dr_mode property from phy to controller
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 12/28] ARM: tegra: apalis_t30: white-space clean-up
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 16/28] ARM: tegra: apalis_t30: reorder backlight properties
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 17/28] ARM: tegra: apalis_t30: drop pwmleds
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 13/28] ARM: tegra: apalis_t30: drop unused mmc1/sd1 labels
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 18/28] ARM: tegra: apalis_t30: pinmux clean-up
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 23/28] ARM: tegra: apalis_t30: add proper emmc vmmc and vqmmc supplies
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 24/28] ARM: tegra: apalis_t30: enable emmc ddr52 mode
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 22/28] ARM: tegra: apalis_t30: add i2c-thermtrip
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 19/28] ARM: tegra: apalis_t30: add missing pinmux
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 25/28] ARM: tegra: apalis_t30: rename clk to clock
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 26/28] ARM: tegra: apalis_t30: line break long compatible property line
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 28/28] ARM: tegra: apalis_t30: support v1.1 hardware revision
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 27/28] ARM: tegra: apalis_t30: fix pcie switch vendor compatible
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 21/28] ARM: tegra: apalis_t30: further lm95245 temperature sensor annotation
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 20/28] ARM: tegra: apalis_t30: use proper irq-gpio for stmpe811
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 14/28] ARM: tegra: apalis_t30: annotate mmc1/sd1
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 11/28] ARM: tegra: apalis_t30: drop unused cami2c label
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 05/28] ARM: tegra: apalis_t30: reorder pcie properties
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 01/28] ARM: tegra: apalis_t30: enable broken-hpi on emmc
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v4 6/8] clk: tegra20: Turn EMC clock gate into divider
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/7] arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] Add support for CPCAP regulators on Tegra devices.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH 0/2] Add support for cpcap regulators on Tegra devices.
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 3/7] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH 1/2] ARM: dts: tegra20: restore address order
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: tegra20/tegra30: add pmu interrupt-affinity
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 5/6] ARM: multi_v7_defconfig: enable tegra raw nand driver
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 3/6] ARM: multi_v7_defconfig: enable dynamic debug
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 2/6] ARM: multi_v7_defconfig: update order
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 4/6] ARM: defconfig: tegra: enable dynamic debug
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 6/6] ARM: defconfig: tegra: enable tegra raw nand driver
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 1/6] ARM: config: multi_v5: enable dynamic debug
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 7/8] clk: tegra: replace warn on with single line
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 3/8] clk: tegra: fix fractional clocks for VDI, VI, EPP, MPE, 2D and 3D
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 5/8] clk: tegra: add mux-only clock option
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 8/8] clk: tegra: show clock name in error from _calc_rate
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 1/8] clk: tegra: implement reset status callback
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 2/8] clk: tegra: host1x has fractional divider
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 4/8] clk: tegra: fix MUX_I2S_SPDIF macro
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• tegra clock updates and fixes
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH] ASoC: wm9712: fix replace codec to component
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 7/7] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 6/7] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 5/7] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 4/7] arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 3/7] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 2/7] mmc: tegra: Reconfigure pad voltages during voltage switching
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 1/7] dt-bindings: Document Tegra SDHCI pinctrl bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 0/7] Tegra SDHCI enable 1.8 V signaling on Tegar210 and Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Applied "ASoC: tegra: improve goto error label" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH v5 1/7] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v5 2/7] soc/tegra: pmc: Factor out DPD register bit calculation
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v5 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v5 4/7] soc/tegra: pmc: Use X macro to generate IO pad tables
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v5 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v5 6/7] soc/tegra: pmc: Remove public pad voltage APIs
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v5 7/7] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v5 0/7] Tegra PMC pinctrl pad configuration
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: RFC: tegra2/tegra3 automotive part changes
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH] ASoC: wm9712: fix replace codec to component
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• Re: [PATCH v2] pinctrl: tegra: fix spelling in devicetree binding document
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] ASoC: wm9712: fix replace codec to component
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH] pinctrl: tegra: fix spelling in devicetree binding document
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• [PATCH v2] pinctrl: tegra: fix spelling in devicetree binding document
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• Re: [PATCH] pinctrl: tegra: fix spelling in devicetree binding document
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH 1/2] ASoC: tegra: improve goto error label
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH 2/2] ASoC: tegra: probe deferral error reporting
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• Re: [PATCH v1] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH] gpiolib: probe deferral error reporting
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH] clk: tegra: probe deferral error reporting
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH] drm/tegra: hdmi: probe deferral error reporting
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH] ASoC: wm9712: fix replace codec to component
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• [PATCH] pinctrl: tegra: fix spelling in devicetree binding document
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: tegra: apalis-tk1: Add SPDX license (GPL-2.0 OR X11) identifiers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: tegra: apalis-tk1: Add SPDX license (GPL-2.0 OR X11) identifiers
  • From: Philippe Ombredanne <pombredanne@xxxxxxxx>
• Re: [PATCH v1] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v1] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] clk: tegra: Fixes for MBIST work around
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] clk: tegra: Correct clk_out_mux parents
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] gpio: tegra: Fix tegra_gpio_irq_set_type()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH] clk: tegra: Fixes for MBIST work around
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• [PATCH v2 2/2] clk: tegra: Correct clk_out_mux parents
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• [PATCH v2 1/2] clk: tegra: Fix const for clk_out parents
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• [PATCH v2 0/2] Correct clk_out_mux parents
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• [PATCH v1] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 3/8] dt: bindings: Move tegra20-emc binding to memory-controllers directory
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 2/8] dt: bindings: tegra20-emc: Document clock property
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 0/8] Tegra20 External Memory Controller driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 6/8] clk: tegra20: Turn EMC clock gate into divider
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 4/8] ARM: dts: tegra20: Add interrupt entry to External Memory Controller
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 1/8] dt: bindings: tegra20-emc: Document interrupt property
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 7/8] clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 8/8] memory: tegra: Introduce Tegra20 EMC driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 5/8] ARM: dts: tegra20: Add clock entry to External Memory Controller
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 1/7] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v4 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v4 2/7] soc/tegra: pmc: Factor out DPD register bit calculation
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v4 4/7] soc/tegra: pmc: Use X macro to generate IO pad tables
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v4 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v4 7/7] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v4 6/7] soc/tegra: pmc: Remove public pad voltage APIs
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v4 0/7] Tegra PMC pinctrl pad configuration
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH] clk: tegra: Correct clk_out_mux parents
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH 1/3] ARM: tegra: apalis-tk1: Fix SPDX license identifier format
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] ARM: tegra: apalis-tk1: Fix SPDX license identifier format
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: tegra: apalis-tk1: Add SPDX license (GPL-2.0 OR X11) identifiers
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: tegra: tegra20: Fix mixed tabs-spaces indentation
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: tegra: apalis-tk1: Fix SPDX license identifier format
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• [PATCH 3/3] ARM: tegra: tegra20: Fix mixed tabs-spaces indentation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/3] ARM: tegra: apalis-tk1: Add SPDX license (GPL-2.0 OR X11) identifiers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 1/3] ARM: tegra: apalis-tk1: Fix SPDX license identifier format
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
  • From: "David R. Piegdon" <lkml@xxxxxxxx>
• Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: tegra: check bounds of die_nr properly
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH] gpio: tegra: Fix tegra_gpio_irq_set_type()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2] media: staging: tegra-vde: Replace debug messages with trace points
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH] drm/tegra: Replace drm_dev_unref with drm_dev_put
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2] mtd: rawnand: tegra: check bounds of die_nr properly
  • From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
• Re: [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: REGRESSION: [PATCHv2 2/2] mm: Drop unneeded ->vm_ops checks
  • From: "Kirill A. Shutemov" <kirill@xxxxxxxxxxxxx>
• Re: REGRESSION: [PATCHv2 2/2] mm: Drop unneeded ->vm_ops checks
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
  • From: LABBE Corentin <clabbe@xxxxxxxxxxxx>
• Re: Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
  • From: LABBE Corentin <clabbe@xxxxxxxxxxxx>
• [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: REGRESSION: [PATCHv2 2/2] mm: Drop unneeded ->vm_ops checks
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• REGRESSION: [PATCHv2 2/2] mm: Drop unneeded ->vm_ops checks
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
  • From: Mikko Perttunen <mperttunen@xxxxxxxxxx>
• Re: [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/3] mmc: tegra: prevent HS200 on Tegra 3
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [GIT PULL 3/5] firmware: tegra: Changes for v4.19-rc1
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 2/5] memory: tegra: Changes for v4.19-rc1
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 5/5] arm64: tegra: Device tree changes for v4.19-rc1
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 4/5] ARM: tegra: Device tree changes for v4.19-rc1
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 1/5] dt-bindings: tegra: Changes for v4.19-rc1
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: RFC: tegra2/tegra3 automotive part changes
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH 1/3] mmc: tegra: prevent HS200 on Tegra 3
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: NVIDIA Tegra changes for v4.19-rc1
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: REGRESSION: [PATCH] mmc: tegra: Use sdhci_pltfm_clk_get_max_clock
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: REGRESSION: [PATCH] mmc: tegra: Use sdhci_pltfm_clk_get_max_clock
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: RFC: tegra2/tegra3 automotive part changes
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
  • From: "David R. Piegdon" <lkml@xxxxxxxx>
• Re: RFC: tegra2/tegra3 automotive part changes
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: REGRESSION: [PATCH] mmc: tegra: Use sdhci_pltfm_clk_get_max_clock
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: RFC: tegra2/tegra3 automotive part changes
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• REGRESSION: [PATCH] mmc: tegra: Use sdhci_pltfm_clk_get_max_clock
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [RESEND PATCH] mmc: tegra: enable ddr_signaling for MMC_TIMING_MMC_DDR52
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• [RESEND PATCH] mmc: tegra: enable ddr_signaling for MMC_TIMING_MMC_DDR52
  • From: Tamás Szűcs <tszucs@xxxxxxxxxxxxx>
• Re: NVIDIA Tegra changes for v4.19-rc1
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: RFC: tegra2/tegra3 automotive part changes
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [GIT PULL 5/5] arm64: tegra: Device tree changes for v4.19-rc1
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [GIT PULL 4/5] ARM: tegra: Device tree changes for v4.19-rc1
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [GIT PULL 3/5] firmware: tegra: Changes for v4.19-rc1
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [GIT PULL 2/5] memory: tegra: Changes for v4.19-rc1
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [GIT PULL 1/5] dt-bindings: tegra: Changes for v4.19-rc1
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• NVIDIA Tegra changes for v4.19-rc1
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: RFC: tegra2/tegra3 automotive part changes
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: RFC: tegra2/tegra3 automotive part changes
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH] mtd: rawnand: tegra: check bounds of die_nr properly
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• RFC: tegra2/tegra3 automotive part changes
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: tegra: check bounds of die_nr properly
  • From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
• Re: [PATCH v6 4/4] clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v6 4/4] clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH v3 7/7] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v6 4/4] clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v6 3/4] clk: tegra: Add sdmmc mux divider clock
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH v3 0/7] Tegra PMC pinctrl pad configuration
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v3 1/7] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v3 2/7] soc/tegra: pmc: Factor out DPD register bit calculation
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v3 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v3 4/7] soc/tegra: pmc: Use X macro to generate IO pad tables
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v3 6/7] soc/tegra: pmc: Remove public pad voltage APIs
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v3 7/7] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 0/4] Multiplex sdmmc low jitter clock path
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 2/4] clk: tegra: Refactor fractional divider calculation
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 3/4] clk: tegra: Add sdmmc mux divider clock
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 4/4] clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v6 1/4] clk: tegra: Fix includes required by fence_udelay()
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH v5 3/4] clk: tegra: Add sdmmc mux divider clock
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v5 3/4] clk: tegra: Add sdmmc mux divider clock
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH v5 3/4] clk: tegra: Add sdmmc mux divider clock
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] mmc: tegra: enable ddr_signaling for MMC_TIMING_MMC_DDR52
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v5 2/4] clk: tegra: refactor 7.1 div calculation
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v5 1/4] clk: tegra: Fix includes required by fence_udelay()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v2 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v2 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH v4 2/4] clk: tegra: refactor 7.1 div calculation
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
  • From: Stefan Agner <stefan@xxxxxxxx>
• [PATCH 2/3] mmc: tegra: fix eMMC DDR52 mode
  • From: Stefan Agner <stefan@xxxxxxxx>
• [PATCH 1/3] mmc: tegra: prevent HS200 on Tegra 3
  • From: Stefan Agner <stefan@xxxxxxxx>
• [GIT PULL] drm/tegra: Fixes for v4.18-rc5
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v2 6/7] soc/tegra: pmc: Remove public pad voltage APIs
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] PCI: fix ptr_ret.cocci warnings
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [PATCH] arm: tegra: Restore host1x/dc dm-pre-reloc properties
  • From: Nicolas Chauvet <kwizart@xxxxxxxxx>
• [PATCH] arm: tegra: Restore host1x/dc dm-pre-reloc properties
  • From: Nicolas Chauvet <kwizart@xxxxxxxxx>
• Re: [PATCH] arm: tegra: Restore host1x/dc dm-pre-reloc properties
  • From: Simon Glass <sjg@xxxxxxxxxxxx>
• [PATCH] arm: tegra: Restore host1x/dc dm-pre-reloc properties
  • From: Nicolas Chauvet <kwizart@xxxxxxxxx>
• Re: [PATCH] arm: tegra: Restore host1x/dc dm-pre-reloc properties
  • From: Simon Glass <sjg@xxxxxxxxxxxx>
• [PATCH] arm: tegra: Restore host1x/dc dm-pre-reloc properties
  • From: Nicolas Chauvet <kwizart@xxxxxxxxx>
• Re: [PATCH] arm: tegra: Restore host1x/dc dm-pre-reloc properties
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v2] mfd: as3722: disable auto power on when AC OK
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 6/7] soc/tegra: pmc: Remove public pad voltage APIs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v2 1/7] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v2 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v2 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH] arm: tegra: Restore host1x/dc dm-pre-reloc properties
  • From: Nicolas Chauvet <kwizart@xxxxxxxxx>
• Re: [PATCH v4 2/4] clk: tegra: refactor 7.1 div calculation
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: Boot WARN with patch "regulator: core: Link consumer with regulator driver"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v5 2/4] clk: tegra: refactor 7.1 div calculation
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v5 1/4] clk: tegra: Fix includes required by fence_udelay()
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v5 4/4] clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v5 3/4] clk: tegra: Add sdmmc mux divider clock
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v5 0/4] Multiplex sdmmc low jitter clock path
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 7/7] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 6/7] soc/tegra: pmc: Remove public pad voltage APIs
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 2/7] soc/tegra: pmc: Factor out DPD register bit calculation
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 1/7] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 4/7] soc/tegra: pmc: Use X macro to generate IO pad tables
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• [PATCH v2 0/7] Tegra PMC pinctrl pad configuration
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH 6/6] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v4 2/4] clk: tegra: refactor 7.1 div calculation
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH 6/6] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Boot WARN with patch "regulator: core: Link consumer with regulator driver"
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH 6/6] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 0/3] PM / Domains: Enable name based lookup at attach
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] soc/tegra: pmc: Use X macro to generate IO pad tables
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 6/6] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH 4/6] soc/tegra: pmc: Use X macro to generate IO pad tables
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>
• Re: [PATCH v4 2/4] clk: tegra: refactor 7.1 div calculation
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 6/6] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 4/6] soc/tegra: pmc: Use X macro to generate IO pad tables
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: Add Tegra PMC pad configuration bindings
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 3/6] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 2/6] soc/tegra: pmc: Factor out DPD register bit calculation
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 1/6] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v4 2/4] clk: tegra: refactor 7.1 div calculation
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH v4 2/4] clk: tegra: refactor 7.1 div calculation
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v1] memory: tegra: Correct driver probe order
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 6/6] soc/tegra: pmc: Implement pad configuration via pinctrl
  • From: Aapo Vienamo <avienamo@xxxxxxxxxx>