On Fri, Jul 20, 2018 at 02:45:26PM +0100, Ben Dooks wrote:
> The host1x clock according to both tegra2 and tegra3 manuals is
> an 8bit divider with lsb being fractional. This is running into
> an issue where the host1x is being set on a tegra20a system to
> 266.4MHz but ends up at 222MHz instead.
>
The fact the hw has a fractional divider, does not mean we're allowed to use
it. Due to the non 50% duty cycle of fractional divided clocks, they are not
allowed for certain peripherals. Do you have information indicating this is
ok for the host1x clock?
Peter.
> Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
> ---
> drivers/clk/tegra/clk-tegra-periph.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
> index 2acba2986bc6..8fa1cecf18a0 100644
> --- a/drivers/clk/tegra/clk-tegra-periph.c
> +++ b/drivers/clk/tegra/clk-tegra-periph.c
> @@ -644,7 +644,7 @@ static struct tegra_periph_init_data periph_clks[] = {
> INT("vde", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_VDE, 61, 0, tegra_clk_vde),
> INT("vi", mux_pllm_pllc_pllp_plla, CLK_SOURCE_VI, 20, 0, tegra_clk_vi),
> INT("epp", mux_pllm_pllc_pllp_plla, CLK_SOURCE_EPP, 19, 0, tegra_clk_epp),
> - INT("host1x", mux_pllm_pllc_pllp_plla, CLK_SOURCE_HOST1X, 28, 0, tegra_clk_host1x),
> + MUX("host1x", mux_pllm_pllc_pllp_plla, CLK_SOURCE_HOST1X, 28, 0, tegra_clk_host1x),
> INT("mpe", mux_pllm_pllc_pllp_plla, CLK_SOURCE_MPE, 60, 0, tegra_clk_mpe),
> INT("2d", mux_pllm_pllc_pllp_plla, CLK_SOURCE_2D, 21, 0, tegra_clk_gr2d),
> INT("3d", mux_pllm_pllc_pllp_plla, CLK_SOURCE_3D, 24, 0, tegra_clk_gr3d),
> --
> 2.18.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
