On Tuesday, 24 July 2018 17:26:58 MSK Marcel Ziswiler wrote: > On Tue, 2018-07-24 at 17:03 +0300, Dmitry Osipenko wrote: > > > On Sunday, 22 July 2018 19:49:09 MSK Marcel Ziswiler wrote: > > > > > From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> > > > > > > Avoid eMMC issues by specifying broken-hpi. > > > > > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> > > > > > > --- > > > > > > Is it a specific eMMC card model that has broken HPI or it is a host > > controller bug? > > > That is a very good question. So far we only have confirmation that at > least some eMMCs from Hynix resp. SKHynix definitely do have bad > firmware. I also found out that ASUS resp. Google did disable HPI on > their Nexus 7 tablet. Therefore, we also disabled HPI quite a while ago > in our downstream BSPs which we successfully validated & verified doing > power cuts and running stress tests in our temperature chambers. I > guess we would have to run more extensive tests with mainline with and > without this setting to be able to really answer your question. For now > I just successfully run a few Apalis T30 and Colibri T30 modules with > this setting over the weekend doing both hdparm -t as well as dding > some urandom files to the eMMC in a loop without seeing any issues. The broken-hpi quirk was added for the Hynix cards specifically in [0]. Maybe you should just extend the mmc_ext_csd_fixups list in [1] with another OEM ID? [0] https://patchwork.kernel.org/patch/9168455/ [1] drivers/mmc/core/quirks.h -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
