On 16 July 2018 at 16:34, Aapo Vienamo <avienamo@xxxxxxxxxx> wrote:
> Tegra SDHCI controllers require the SDHCI clock divider to be configured
> to divide the clock by two in DDR50/52 modes. Incorrectly configured
> clock divider results in corrupted data.
>
> Prevent the possibility of incorrectly calculating the divider value due
> to clock rate rounding or low parent clock frequency by not assigning
> host->max_clk to clk_get_rate() on tegra_sdhci_set_clock().
>
> See the comments for further details.
>
> Fixes: a8e326a ("mmc: tegra: implement module external clock change")
> Signed-off-by: Aapo Vienamo <avienamo@xxxxxxxxxx>
Thanks, applied for next!
Kind regards
Uffe
> ---
> drivers/mmc/host/sdhci-tegra.c | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
> index ddf00166..908b23e 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -210,9 +210,24 @@ static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
> if (!clock)
> return sdhci_set_clock(host, clock);
>
> + /*
> + * In DDR50/52 modes the Tegra SDHCI controllers require the SDHCI
> + * divider to be configured to divided the host clock by two. The SDHCI
> + * clock divider is calculated as part of sdhci_set_clock() by
> + * sdhci_calc_clk(). The divider is calculated from host->max_clk and
> + * the requested clock rate.
> + *
> + * By setting the host->max_clk to clock * 2 the divider calculation
> + * will always result in the correct value for DDR50/52 modes,
> + * regardless of clock rate rounding, which may happen if the value
> + * from clk_get_rate() is used.
> + */
> host_clk = tegra_host->ddr_signaling ? clock * 2 : clock;
> clk_set_rate(pltfm_host->clk, host_clk);
> - host->max_clk = clk_get_rate(pltfm_host->clk);
> + if (tegra_host->ddr_signaling)
> + host->max_clk = host_clk;
> + else
> + host->max_clk = clk_get_rate(pltfm_host->clk);
>
> sdhci_set_clock(host, clock);
>
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
