Linux Serial

• Thread Index

• [PATCH v2] earlycon: prevent multiple register_console()
  • From: Michael Walle
• Re: [PATCH] earlycon: prevent multiple register_console()
  • From: Michael Walle
• Re: [PATCH v2 2/6] serial: core: add sysfs attribute to suppress ready signalling on open
  • From: Jiri Slaby
• Re: [PATCH v2 2/6] serial: core: add sysfs attribute to suppress ready signalling on open
  • From: Mychaela Falconia
• [PATCH 1/2] tty/vt: defkeymap.c_shipped, little unification with loadkeys
  • From: Jiri Slaby
• [PATCH 2/2] tty/vt: Makefile, add --unicode for loadkeys invocation
  • From: Jiri Slaby
• [PATCH] serial: pmac_zilog: remove unused header
  • From: Jiri Slaby
• Re: [PATCH v2 2/6] serial: core: add sysfs attribute to suppress ready signalling on open
  • From: Jiri Slaby
• Re: [V4] serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  • From: Marek Szyprowski
• Re: [PATCH] earlycon: prevent multiple register_console()
  • From: Rob Herring
• Re: [BUG] mtk serial broken on mt7622 with 5.18.0
  • From: Ilpo Järvinen
• Re: [PATCH] tty: serial: qcom-geni-serial: minor fixes to get_clk_div_rate()
  • From: Doug Anderson
• Re: tty: fix a possible hang on tty device
  • From: Ilpo Järvinen
• [BUG] mtk serial broken on mt7622 with 5.18.0
  • From: Frank Wunderlich
• Re: tty: fix a possible hang on tty device
  • From: Greg KH
• [PATCH] earlycon: prevent multiple register_console()
  • From: Michael Walle
• Re: tty: fix a possible hang on tty device
  • From: cael
• Re: [V4] serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  • From: Vijaya Krishna Nivarthi
• Re: [PATCH] tty: serial: qcom-geni-serial: minor fixes to get_clk_div_rate()
  • From: Vijaya Krishna Nivarthi
• Re: [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree
  • From: Krzysztof Kozlowski
• Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Krzysztof Kozlowski
• Re: [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree
  • From: Krzysztof Kozlowski
• Re: [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH 09/17] dt-bindings: spi: mt65xx: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski
• Re: tty: fix a possible hang on tty device
  • From: Greg KH
• Re: [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board
  • From: Krzysztof Kozlowski
• Re: [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Krzysztof Kozlowski
• Re: [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC
  • From: Krzysztof Kozlowski
• Re: [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation
  • From: Krzysztof Kozlowski
• Re: [PATCH 00/17] Add support for MT8365 EVK board
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: qcom-geni-serial: minor fixes to get_clk_div_rate()
  • From: Doug Anderson
• Re: [PATCH] tty: serial: qcom-geni-serial: minor fixes to get_clk_div_rate()
  • From: Greg KH
• [PATCH] tty: serial: qcom-geni-serial: minor fixes to get_clk_div_rate()
  • From: Vijaya Krishna Nivarthi
• RE: [V2] tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  • From: Vijaya Krishna Nivarthi (Temp) (QUIC)
• Re: [PATCH 4/4] serial: max310x: implement I2C support
  • From: kernel test robot
• Re: [PATCH 3/4] serial: max310x: make accessing revision id interface-agnostic
  • From: Andy Shevchenko
• [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings
  • From: Fabien Parent
• [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation
  • From: Fabien Parent
• [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  • From: Fabien Parent
• [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings
  • From: Fabien Parent
• [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC
  • From: Fabien Parent
• [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  • From: Fabien Parent
• [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Fabien Parent
• [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings
  • From: Fabien Parent
• [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  • From: Fabien Parent
• [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree
  • From: Fabien Parent
• [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree
  • From: Fabien Parent
• [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board
  • From: Fabien Parent
• [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Fabien Parent
• [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add MT8365 SoC bindings
  • From: Fabien Parent
• [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  • From: Fabien Parent
• [PATCH 09/17] dt-bindings: spi: mt65xx: add MT8365 SoC bindings
  • From: Fabien Parent
• [PATCH 00/17] Add support for MT8365 EVK board
  • From: Fabien Parent
• [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings
  • From: Fabien Parent
• Re: tty: fix a possible hang on tty device
  • From: Ilpo Järvinen
• Re: [PATCH 4/4] serial: max310x: implement I2C support
  • From: kernel test robot
• [PATCH v2 6/6] USB: serial: ftdi_sio: add support for FreeCalypso DUART28C adapter
  • From: Mychaela N. Falconia
• [PATCH v2 3/6] serial: core: fully suppress raising DTR & RTS on open if nordy is set
  • From: Mychaela N. Falconia
• [PATCH v2 2/6] serial: core: add sysfs attribute to suppress ready signalling on open
  • From: Mychaela N. Falconia
• [PATCH v2 1/6] tty: add port flag to suppress ready signalling on open
  • From: Mychaela N. Falconia
• [PATCH v2 5/6] USB: serial: ftdi_sio: pass port to quirk port_probe functions
  • From: Mychaela N. Falconia
• [PATCH v2 4/6] USB: serial: add sysfs attribute to suppress ready signalling on open
  • From: Mychaela N. Falconia
• [PATCH v2 0/6] serial ports: add ability to suppress raising DTR & RTS on open
  • From: Mychaela N. Falconia
• Re: [PATCH 2/6] serial: core: add sysfs attribute to suppress raising DTR & RTS on open
  • From: Mychaela Falconia
• [PATCH 4/4] serial: max310x: implement I2C support
  • From: Cosmin Tanislav
• [PATCH 3/4] serial: max310x: make accessing revision id interface-agnostic
  • From: Cosmin Tanislav
• [PATCH 2/4] serial: max310x: use a separate regmap for each port
  • From: Cosmin Tanislav
• [PATCH 1/4] serial: max310x: use regmap methods for SPI batch operations
  • From: Cosmin Tanislav
• Re: [PATCH 1/6] tty: add port flag to suppress raising DTR & RTS on open
  • From: Mychaela Falconia
• Re: [PATCH 0/6] serial ports: add ability to suppress raising DTR & RTS on open
  • From: Greg Kroah-Hartman
• Re: [PATCH 0/6] serial ports: add ability to suppress raising DTR & RTS on open
  • From: Mychaela Falconia
• [PATCH v3 9/9] tty: n_gsm: fix race condition in gsmld_write()
  • From: D. Starke
• [PATCH v3 7/9] tty: n_gsm: fix packet re-transmission without open control channel
  • From: D. Starke
• [PATCH v3 5/9] tty: n_gsm: fix non flow control frames during mux flow off
  • From: D. Starke
• [PATCH v3 4/9] tty: n_gsm: fix missing timer to handle stalled links
  • From: D. Starke
• [PATCH v3 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path
  • From: D. Starke
• [PATCH v3 8/9] tty: n_gsm: fix resource allocation order in gsm_activate_mux()
  • From: D. Starke
• [PATCH v3 3/9] tty: n_gsm: fix wrong queuing behavior in gsm_dlci_data_output()
  • From: D. Starke
• [PATCH v3 2/9] tty: n_gsm: fix tty registration before control channel open
  • From: D. Starke
• [PATCH v3 1/9] tty: n_gsm: fix user open not possible at responder until initiator open
  • From: D. Starke
• Re: [PATCH v1 07/19] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Tomer Maimon
• Re: [PATCH 2/6] serial: core: add sysfs attribute to suppress raising DTR & RTS on open
  • From: Andy Shevchenko
• Re: [PATCH 3/6] serial: core: fully suppress raising DTR & RTS on open if manual_rtsdtr
  • From: Andy Shevchenko
• Re: [PATCH 1/6] tty: add port flag to suppress raising DTR & RTS on open
  • From: Andy Shevchenko
• Re: [PATCH 0/6] serial ports: add ability to suppress raising DTR & RTS on open
  • From: Greg Kroah-Hartman
• Re: tty: fix a possible hang on tty device
  • From: cael
• Re: [PATCH v1 00/19] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Andy Shevchenko
• Re: [PATCH 3/3] serial: st-asc: remove include of pm_runtime.h
  • From: Patrice CHOTARD
• [PATCH] serial: core: check if uart_get_info succeeds before using
  • From: Tom Rix
• [PATCH 0/6] serial ports: add ability to suppress raising DTR & RTS on open
  • From: Mychaela N. Falconia
• [PATCH 3/6] serial: core: fully suppress raising DTR & RTS on open if manual_rtsdtr
  • From: Mychaela N. Falconia
• [PATCH 2/6] serial: core: add sysfs attribute to suppress raising DTR & RTS on open
  • From: Mychaela N. Falconia
• [PATCH 4/6] USB: serial: add sysfs attribute to suppress raising DTR & RTS on open
  • From: Mychaela N. Falconia
• [PATCH 5/6] USB: serial: ftdi_sio: pass port to quirk port_probe functions
  • From: Mychaela N. Falconia
• [PATCH 1/6] tty: add port flag to suppress raising DTR & RTS on open
  • From: Mychaela N. Falconia
• [PATCH 6/6] USB: serial: ftdi_sio: add support for FreeCalypso DUART28C adapter
  • From: Mychaela N. Falconia
• RE: [V2] tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  • From: Vijaya Krishna Nivarthi (Temp) (QUIC)
• [PATCH] serdev: Directly use ida_alloc()/free()
  • From: keliu
• Re: [V2] tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  • From: Doug Anderson
• Re: Revisiting unwanted auto-assertion of DTR & RTS on serial port open
  • From: Greg Kroah-Hartman
• [PATCH 24/31] serial: qcom: Migrate to dev_pm_opp_set_config()
  • From: Viresh Kumar
• [PATCH 00/31] OPP: Add new configuration interface: dev_pm_opp_set_config()
  • From: Viresh Kumar
• Revisiting unwanted auto-assertion of DTR & RTS on serial port open
  • From: Mychaela Falconia
• [PATCH 3/3] serial: st-asc: remove include of pm_runtime.h
  • From: Claudiu Beznea
• [PATCH 2/3] tty: serial: atmel: improve clock management
  • From: Claudiu Beznea
• [PATCH 1/3] tty: serial: atmel: stop using legacy pm ops
  • From: Claudiu Beznea
• [PATCH 0/3] serial: atmel: cleanup code
  • From: Claudiu Beznea
• Re: [PATCH] tty: n_gsm: Debug output allocation must use GFP_ATOMIC
  • From: Gregory CLEMENT
• Re: tty: fix a possible hang on tty device
  • From: Ilpo Järvinen
• Re: tty: fix a possible hang on tty device
  • From: cael
• Re: [PATCH] serial: 8250_fsl: Don't report FE, PE and OE twice
  • From: Ilpo Järvinen
• Re: [PATCH -next] serial: pic32: fix missing clk_disable_unprepare() on error in pic32_uart_startup()
  • From: Jiri Slaby
• [PATCH -next] serial: pic32: fix missing clk_disable_unprepare() on error in pic32_uart_startup()
  • From: Yang Yingliang
• Re: [PATCH v3] dt-bindings: serial: mtk-uart: Convert txt to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH] serial: 8250_fsl: Don't report FE, PE and OE twice
  • From: Uwe Kleine-König
• Re: [PATCH] serial: 8250_fsl: Don't report FE, PE and OE twice
  • From: Ilpo Järvinen
• Re: tty: fix a possible hang on tty device
  • From: Ilpo Järvinen
• Re: tty: fix a possible hang on tty device
  • From: cael
• Re: [V4] serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  • From: Marek Szyprowski
• [PATCH v3] dt-bindings: serial: mtk-uart: Convert txt to json-schema
  • From: AngeloGioacchino Del Regno
• Re: tty: fix a possible hang on tty device
  • From: Ilpo Järvinen
• Re: tty: fix a possible hang on tty device
  • From: cael
• Re: tty: fix a possible hang on tty device
  • From: Ilpo Järvinen
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Tomer Maimon
• tty: fix a possible hang on tty device
  • From: cael
• Re: [V4] serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  • From: Marek Szyprowski
• Re: [PATCH] dt-bindings: Fix properties without any type
  • From: Rob Herring
• [PATCH] tty: n_gsm: Debug output allocation must use GFP_ATOMIC
  • From: Tony Lindgren
• Re: [PATCH v1 18/19] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Geert Uytterhoeven
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Geert Uytterhoeven
• Re: [PATCH v1 17/19] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 17/19] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Geert Uytterhoeven
• Re: [PATCH v1 09/19] dt-bindings: reset: add syscon property
  • From: Krzysztof Kozlowski
• Re: [PATCH] Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  • From: AngeloGioacchino Del Regno
• Re: [PATCH v1 00/19] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Arnd Bergmann
• Re: [PATCH v1 04/19] tty: serial: 8250: Add NPCM845 UART support
  • From: Krzysztof Kozlowski
• RE: [PATCH v2 4/9] tty: n_gsm: fix missing timer to handle stalled links
  • From: Starke, Daniel
• Re: [PATCH] Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  • From: Greg KH
• Re: [PATCH] Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  • From: AngeloGioacchino Del Regno
• Re: [PATCH v2 1/9] tty: n_gsm: fix user open not possible at responder until initiator open
  • From: Greg KH
• Re: [PATCH] Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  • From: Greg KH
• Re: [PATCH v2 4/9] tty: n_gsm: fix missing timer to handle stalled links
  • From: Jiri Slaby
• Re: [PATCH v1 04/19] tty: serial: 8250: Add NPCM845 UART support
  • From: Arnd Bergmann
• Re: [PATCH v1 12/19] reset: npcm: Add NPCM8XX support
  • From: Arnd Bergmann
• Re: [PATCH] Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  • From: AngeloGioacchino Del Regno
• Re: [PATCH v1 18/19] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Arnd Bergmann
• Re: [PATCH v1 18/19] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 17/19] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 14/19] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 15/19] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 15/19] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 10/19] reset: npcm: using syscon instead of device data
  • From: Krzysztof Kozlowski
• RE: [PATCH v2 1/9] tty: n_gsm: fix user open not possible at responder until initiator open
  • From: Starke, Daniel
• Re: [PATCH v1 09/19] dt-bindings: reset: add syscon property
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 07/19] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 05/19] dt-bindings: watchdog: npcm: Add npcm845 compatible string
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 01/19] dt-bindings: timer: npcm: Add npcm845 compatible string
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 03/19] dt-bindings: serial: 8250: Add npcm845 compatible string
  • From: Krzysztof Kozlowski
• Re: [PATCH] dt-bindings: Fix properties without any type
  • From: Sebastian Reichel
• Re: [PATCH v1 08/19] clk: npcm8xx: add clock controller
  • From: Ilpo Järvinen
• Re: [PATCH v1 06/19] watchdog: npcm_wdt: Add NPCM845 watchdog support
  • From: Guenter Roeck
• [PATCH v1 12/19] reset: npcm: Add NPCM8XX support
  • From: Tomer Maimon
• [PATCH v1 19/19] arm64: defconfig: Add Nuvoton NPCM family support
  • From: Tomer Maimon
• [PATCH v1 05/19] dt-bindings: watchdog: npcm: Add npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v1 00/19] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Tomer Maimon
• [PATCH v1 13/19] dt-bindings: arm: npcm: Add maintainer
  • From: Tomer Maimon
• [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Tomer Maimon
• [PATCH v1 10/19] reset: npcm: using syscon instead of device data
  • From: Tomer Maimon
• [PATCH v1 09/19] dt-bindings: reset: add syscon property
  • From: Tomer Maimon
• [PATCH v1 07/19] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Tomer Maimon
• [PATCH v1 18/19] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Tomer Maimon
• [PATCH v1 17/19] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Tomer Maimon
• [PATCH v1 16/19] arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  • From: Tomer Maimon
• [PATCH v1 08/19] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• [PATCH v1 04/19] tty: serial: 8250: Add NPCM845 UART support
  • From: Tomer Maimon
• [PATCH v1 15/19] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  • From: Tomer Maimon
• [PATCH v1 02/19] clocksource: timer-npcm7xx: Add NPCM845 timer support
  • From: Tomer Maimon
• [PATCH v1 14/19] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v1 01/19] dt-bindings: timer: npcm: Add npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v1 03/19] dt-bindings: serial: 8250: Add npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v1 06/19] watchdog: npcm_wdt: Add NPCM845 watchdog support
  • From: Tomer Maimon
• [tty:tty-testing] BUILD SUCCESS 25e02ba60f0fbe65ba07553b5b2b8867726273c4
  • From: kernel test robot
• Re: [PATCH] dt-bindings: Fix properties without any type
  • From: Krzysztof Kozlowski
• [PATCH] serial: tegra: fix typos in comments
  • From: Julia Lawall
• Re: [PATCH] dt-bindings: Fix properties without any type
  • From: Sam Ravnborg
• Re: [PATCH] serial: 8250: Store to lsr_save_flags after lsr read
  • From: Ilpo Järvinen
• Re: [PATCH] serial: 8250: Store to lsr_save_flags after lsr read
  • From: Uwe Kleine-König
• Re: [PATCH] dt-bindings: Fix properties without any type
  • From: Bartosz Golaszewski
• [PATCH] serial: 8250: Store to lsr_save_flags after lsr read
  • From: Ilpo Järvinen
• Re: [PATCH v2] dt-bindings: serial: mtk-uart: Convert txt to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH] dt-bindings: Fix properties without any type
  • From: Peter Rosin
• Re: [PATCH v2 7/9] serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  • From: Patrice CHOTARD
• Re: [PATCH] dt-bindings: Fix properties without any type
  • From: Mark Brown
• [PATCH] dt-bindings: Fix properties without any type
  • From: Rob Herring
• Re: [PATCH v4 0/3] tty/serial: Process XON/XOFF robustly
  • From: Greg KH
• Re: [PATCH 1/4] serial: pmac_zilog: remove unfinished DBDMA support
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 1/9] tty: n_gsm: fix user open not possible at responder until initiator open
  • From: Greg KH
• [PATCH v2] dt-bindings: serial: mtk-uart: Convert txt to json-schema
  • From: AngeloGioacchino Del Regno
• Re: [PATCH] dt-bindings: serial: mtk-uart: Convert txt to json-schema
  • From: Rob Herring
• [PATCH] dt-bindings: serial: mtk-uart: Convert txt to json-schema
  • From: AngeloGioacchino Del Regno
• Re: [PATCH 1/4] serial: pmac_zilog: remove unfinished DBDMA support
  • From: Jiri Slaby
• Re: [PATCH 4/4] serial: pmac_zilog: remove initial print
  • From: Ilpo Järvinen
• Re: [PATCH 1/4] serial: pmac_zilog: remove unfinished DBDMA support
  • From: Ilpo Järvinen
• Re: [PATCH] serial: amba-pl011: move header content to .c
  • From: Ilpo Järvinen
• [PATCH v2 9/9] pcmcia: synclink_cs: Don't allow CS5-6
  • From: Ilpo Järvinen
• [PATCH v2 7/9] serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  • From: Ilpo Järvinen
• [PATCH v2 5/9] serial: sh-sci: Don't allow CS5-6
  • From: Ilpo Järvinen
• [PATCH v2 6/9] serial: sifive: Sanitize CSIZE and c_iflag
  • From: Ilpo Järvinen
• [PATCH v2 4/9] serial: txx9: Don't allow CS5-6
  • From: Ilpo Järvinen
• [PATCH v2 8/9] serial: stm32-usart: Correct CSIZE, bits, and parity
  • From: Ilpo Järvinen
• [PATCH v2 2/9] serial: digicolor-usart: Don't allow CS5-6
  • From: Ilpo Järvinen
• [PATCH v2 1/9] serial: uartlite: Fix BRKINT clearing
  • From: Ilpo Järvinen
• [PATCH v2 3/9] serial: rda-uart: Don't allow CS5-6
  • From: Ilpo Järvinen
• [PATCH v2 0/9] tty/serial: Termios flag fixes
  • From: Ilpo Järvinen
• [PATCH] serial: amba-pl011: move header content to .c
  • From: Jiri Slaby
• [PATCH 4/4] serial: pmac_zilog: remove initial print
  • From: Jiri Slaby
• [PATCH 3/4] serial: pmac_zilog: remove tracing prints
  • From: Jiri Slaby
• [PATCH 2/4] serial: pmac_zilog: remove unused uart_pmac_port::termios_cache
  • From: Jiri Slaby
• [PATCH 1/4] serial: pmac_zilog: remove unfinished DBDMA support
  • From: Jiri Slaby
• [PATCH v2 5/9] tty: n_gsm: fix non flow control frames during mux flow off
  • From: D. Starke
• [PATCH v2 4/9] tty: n_gsm: fix missing timer to handle stalled links
  • From: D. Starke
• [PATCH v2 7/9] tty: n_gsm: fix packet re-transmission without open control channel
  • From: D. Starke
• [PATCH v2 9/9] tty: n_gsm: fix race condition in gsmld_write()
  • From: D. Starke
• [PATCH v2 2/9] tty: n_gsm: fix tty registration before control channel open
  • From: D. Starke
• [PATCH v2 3/9] tty: n_gsm: fix wrong queuing behavior in gsm_dlci_data_output()
  • From: D. Starke
• [PATCH v2 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path
  • From: D. Starke
• [PATCH v2 1/9] tty: n_gsm: fix user open not possible at responder until initiator open
  • From: D. Starke
• [PATCH v2 8/9] tty: n_gsm: fix resource allocation order in gsm_activate_mux()
  • From: D. Starke
• Re: Using Serdev is it Possible to Pull RX Low
  • From: Greg KH
• Re: Using Serdev is it Possible to Pull RX Low
  • From: christopher tyerman
• [PATCH v2 -next] serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  • From: YueHaibing
• Re: custom serial driver node not created
  • From: Belisko Marek
• Re: custom serial driver node not created
  • From: Greg KH
• Re: [PATCH 1/9] serial: uartline: Fix BRKINT clearing
  • From: Ilpo Järvinen
• Re: custom serial driver node not created
  • From: Belisko Marek
• Re: [PATCH 1/9] serial: uartline: Fix BRKINT clearing
  • From: Shubhrajyoti Datta
• Re: custom serial driver node not created
  • From: Greg KH
• custom serial driver node not created
  • From: Belisko Marek
• Re: Using Serdev is it Possible to Pull RX Low
  • From: Greg KH
• Re: [PATCH 2/9] serial: digicolor-usart: Don't allow CS5-6
  • From: Baruch Siach
• Re: [PATCH -next] serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  • From: YueHaibing
• Using Serdev is it Possible to Pull RX Low
  • From: linuxkernel
• Re: [PATCH v5] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  • From: Rob Herring
• [tty:tty-testing] BUILD SUCCESS d6da35e0c6d50f76eaf11a0496d3d2ec1a1fea3f
  • From: kernel test robot
• Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Andy Shevchenko
• Re: [PATCH 1/9] serial: uartline: Fix BRKINT clearing
  • From: Sean Anderson
• [PATCH 9/9] pcmcia: synclink_cs: Don't allow CS5-6
  • From: Ilpo Järvinen
• [PATCH 7/9] serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  • From: Ilpo Järvinen
• [PATCH 8/9] serial: stm32-usart: Correct CSIZE, bits, and parity
  • From: Ilpo Järvinen
• [PATCH 6/9] serial: sifive: Sanitize CSIZE and c_iflag
  • From: Ilpo Järvinen
• [PATCH 5/9] serial: sh-sci: Don't allow CS5-6
  • From: Ilpo Järvinen
• [PATCH 1/9] serial: uartline: Fix BRKINT clearing
  • From: Ilpo Järvinen
• [PATCH 0/9] tty/serial: Termios flag fixes
  • From: Ilpo Järvinen
• [PATCH 3/9] serial: rda-uart: Don't allow CS5-6
  • From: Ilpo Järvinen
• [PATCH 4/9] serial: txx9: Don't allow CS5-6
  • From: Ilpo Järvinen
• [PATCH 2/9] serial: digicolor-usart: Don't allow CS5-6
  • From: Ilpo Järvinen
• Re: tty: fix a possible hang on tty device
  • From: Greg KH
• Re: [PATCH -next] tty: serial: max3100: Add missing uart_unregister_driver in max3100_probe
  • From: Greg KH
• Re: [PATCH v4 1/1] soc: fujitsu: Add A64FX diagnostic interrupt driver
  • From: hasegawa-hitomi@xxxxxxxxxxx
• Re: [PATCH v4 1/1] soc: fujitsu: Add A64FX diagnostic interrupt driver
  • From: hasegawa-hitomi@xxxxxxxxxxx
• Re: [PATCH -next] serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  • From: Jiri Slaby
• [PATCH -next] serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  • From: YueHaibing
• Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Michael Ellerman
• Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Andy Shevchenko
• Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Andy Shevchenko
• Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Michael Ellerman
• Re: [PATCH] serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
  • From: Ricardo Ribalda Delgado
• Re: [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4
  • From: Vinod Koul
• [V2] tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  • From: Vijaya Krishna Nivarthi
• Re: [PATCH] serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  • From: Vijaya Krishna Nivarthi
• [V4] serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  • From: Vijaya Krishna Nivarthi
• Re: [GIT PULL] TTY/Serial driver fixes for 5.18-rc7
  • From: pr-tracker-bot
• [GIT PULL] TTY/Serial driver fixes for 5.18-rc7
  • From: Greg KH
• Re: [PATCH 0/3] Documentation: Fix issues with Oxford Semiconductor PCIe (Tornado) 950
  • From: Maciej W. Rozycki
• Re: [PATCH 0/3] Documentation: Fix issues with Oxford Semiconductor PCIe (Tornado) 950
  • From: Akira Yokosawa
• [tty:tty-linus] BUILD SUCCESS 401fb66a355eb0f22096cf26864324f8e63c7d78
  • From: kernel test robot
• Re: Question about SC16IS752 device tree.
  • From: Zhou Yanjie
• Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Guenter Roeck
• Re: [PATCH 3/3] Documentation: Wire Oxford Semiconductor PCIe (Tornado) 950
  • From: Maciej W. Rozycki
• Re: [PATCH 3/3] Documentation: Wire Oxford Semiconductor PCIe (Tornado) 950
  • From: Bagas Sanjaya
• Re: [PATCH 3/3] Documentation: Wire Oxford Semiconductor PCIe (Tornado) 950
  • From: Bagas Sanjaya
• [PATCH 2/3] Documentation: Reformat Oxford Semiconductor PCIe (Tornado) 950
  • From: Maciej W. Rozycki
• [PATCH 1/3] Documentation: Move Oxford Semiconductor PCIe (Tornado) 950 to misc-devices
  • From: Maciej W. Rozycki
• [PATCH 3/3] Documentation: Wire Oxford Semiconductor PCIe (Tornado) 950
  • From: Maciej W. Rozycki
• [PATCH 0/3] Documentation: Fix issues with Oxford Semiconductor PCIe (Tornado) 950
  • From: Maciej W. Rozycki
• [PATCH] serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
  • From: Ilpo Järvinen
• Re: [PATCH v4 1/1] soc: fujitsu: Add A64FX diagnostic interrupt driver
  • From: Arnd Bergmann
• Re: [PATCH v2 0/5] tty/serial: termbits cleanups
  • From: Johan Hovold
• [PATCH v2 5/5] serial: jsm: Use B0 instead of 0
  • From: Ilpo Järvinen
• [PATCH v2 4/5] serial: fsl_lpuart: Remove unnecessary clearing for CRTSCTS
  • From: Ilpo Järvinen
• [PATCH v2 3/5] tty: remove IBSHIFT ifdefs
  • From: Ilpo Järvinen
• [PATCH v2 2/5] tty: remove BOTHER ifdefs
  • From: Ilpo Järvinen
• [PATCH v2 0/5] tty/serial: termbits cleanups
  • From: Ilpo Järvinen
• [PATCH v2 1/5] tty: remove CMSPAR ifdefs
  • From: Ilpo Järvinen
• Re: [PATCH 5/5] serial: jsm: Use B0 instead of 0
  • From: Johan Hovold
• Re: [PATCH 4/5] serial: fsl_lpuart: Remove unnecessary clearing for CRTSCTS
  • From: Johan Hovold
• Re: [PATCH 3/5] tty/termbits: remove #ifdef IBSHIFT that is always defined
  • From: Johan Hovold
• Re: [PATCH 2/5] tty/termbits: remove #ifdef BOTHER that is always defined
  • From: Johan Hovold
• Re: [PATCH 1/5] tty/termbits: remove #ifdef CMSPAR that is always defined
  • From: Johan Hovold
• Re: [PATCH] serial: 8250_fsl: Don't report FE, PE and OE twice
  • From: Uwe Kleine-König
• Re: [PATCH] serial: 8250_fsl: Don't report FE, PE and OE twice
  • From: Paul Gortmaker
• Re: Question about SC16IS752 device tree.
  • From: Rob Herring
• [PATCH] tty: n_gsm: Fix packet data hex dump output
  • From: Tony Lindgren
• [PATCH v5] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  • From: Phil Edworthy
• RE: [PATCH v4 1/2] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  • From: Phil Edworthy
• Re: [PATCH] serial: 8250_fsl: Don't report FE, PE and OE twice
  • From: Uwe Kleine-König
• Re: [PATCH] serial: 8250_fsl: Don't report FE, PE and OE twice
  • From: Paul Gortmaker
• Re: broken FSL erratum handling for 8250 on MPC8xxx
  • From: Paul Gortmaker
• Re: [PATCH v4 1/2] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  • From: Rob Herring
• Re: [PATCH] serial: Revert RS485 polarity change on UART open
  • From: m . brock
• [PATCH 3/5] tty/termbits: remove #ifdef IBSHIFT that is always defined
  • From: Ilpo Järvinen
• [PATCH 5/5] serial: jsm: Use B0 instead of 0
  • From: Ilpo Järvinen
• [PATCH 4/5] serial: fsl_lpuart: Remove unnecessary clearing for CRTSCTS
  • From: Ilpo Järvinen
• [PATCH 2/5] tty/termbits: remove #ifdef BOTHER that is always defined
  • From: Ilpo Järvinen
• [PATCH 1/5] tty/termbits: remove #ifdef CMSPAR that is always defined
  • From: Ilpo Järvinen
• [PATCH 0/5] tty/serial termbits cleanups
  • From: Ilpo Järvinen
• Re: [PATCH -next] tty: serial: max3100: Add missing uart_unregister_driver in max3100_probe
  • From: Jiri Slaby
• [PATCH] serial: 8250_fsl: Don't report FE, PE and OE twice
  • From: Uwe Kleine-König
• broken FSL erratum handling for 8250 on MPC8xxx
  • From: Uwe Kleine-König
• [PATCH -next] tty: serial: max3100: Add missing uart_unregister_driver in max3100_probe
  • From: Zheng Bin
• Re: [PATCH v4 1/1] soc: fujitsu: Add A64FX diagnostic interrupt driver
  • From: Jiri Slaby
• Re: [PATCH v4 1/1] soc: fujitsu: Add A64FX diagnostic interrupt driver
  • From: Jiri Slaby
• [PATCH v4 1/1] soc: fujitsu: Add A64FX diagnostic interrupt driver
  • From: Hitomi Hasegawa
• [PATCH v4 0/1] soc: fujitsu: Add A64FX diagnostic interrupt driver
  • From: Hitomi Hasegawa
• Re: Question about SC16IS752 device tree.
  • From: Zhou Yanjie
• Re: Question about SC16IS752 device tree.
  • From: H. Nikolaus Schaller
• Re: [PATCH] Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  • From: AngeloGioacchino Del Regno
• Re: [PATCH] Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  • From: Mark Brown
• Re: [PATCH] Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  • From: AngeloGioacchino Del Regno
• Re: [PATCH] Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  • From: Mark Brown
• [PATCH] Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  • From: AngeloGioacchino Del Regno
• RE: [PATCH 0/7] tty: xilinx_uartps: fixes and improvements
  • From: Shubhrajyoti Datta
• RE: [PATCH 3/7] tty: xilinx_uartps: Add check for runtime_get_sync calls
  • From: Shubhrajyoti Datta
• Re: [PATCH next v1] serial: msm_serial: disable interrupts in __msm_console_write()
  • From: Petr Mladek
• Re: [PATCH v1] serial: meson: acquire port->lock in startup()
  • From: Greg Kroah-Hartman
• Re: [PATCH v1] serial: meson: acquire port->lock in startup()
  • From: Petr Mladek
• Re: next/pending-fixes bisection: baseline.login on mt8173-elm-hana
  • From: Chen-Yu Tsai
• Re: next/pending-fixes bisection: baseline.login on mt8173-elm-hana
  • From: AngeloGioacchino Del Regno
• [tty:tty-testing] BUILD SUCCESS 4419da5d5d4b1788568b7bf22c083ba2832891df
  • From: kernel test robot
• Re: Question about SC16IS752 device tree.
  • From: Zhou Yanjie
• Re: Question about SC16IS752 device tree.
  • From: H. Nikolaus Schaller
• Re: Question about SC16IS752 device tree.
  • From: Zhou Yanjie
• Re: [PATCH v1 1/2] serial: 8250_dw: Use devm_add_action_or_reset()
  • From: Marion & Christophe JAILLET
• Re: next/pending-fixes bisection: baseline.login on mt8173-elm-hana
  • From: Mark Brown
• Re: Question about SC16IS752 device tree.
  • From: Paul Cercueil
• Question about SC16IS752 device tree.
  • From: Zhou Yanjie
• Re: [PATCH v1 1/2] serial: 8250_dw: Use devm_add_action_or_reset()
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] serial: 8250_dw: Use devm_add_action_or_reset()
  • From: Christophe JAILLET
• [PATCH v1 2/2] serial: 8250_dw: Use dev_err_probe()
  • From: Andy Shevchenko
• [PATCH v1 1/2] serial: 8250_dw: Use devm_add_action_or_reset()
  • From: Andy Shevchenko
• Re: next/pending-fixes bisection: baseline.login on mt8173-elm-hana
  • From: Mark Brown
• [PATCH v1 1/1] serial: 8250_dw: Update the list of OF headers used by driver
  • From: Andy Shevchenko
• [tty:tty-next] BUILD SUCCESS 9e6a90790357e8b468445f5c549c498126cedefb
  • From: kernel test robot
• Re: [PATCH] fsl_lpuart: Don't enable interrupts too early
  • From: Indan Zupancic
• Re: [PATCH 1/3] termbits.h: create termbits-common.h for identical bits
  • From: Ilpo Järvinen
• Re: [PATCH 2/3] tty: n_gsm: fix mux activation issues in gsm_config()
  • From: Jiri Slaby
• RE: [PATCH 3/3] tty: n_gsm: fix invalid gsmtty_write_room() result
  • From: Starke, Daniel
• RE: [PATCH 2/3] tty: n_gsm: fix mux activation issues in gsm_config()
  • From: Starke, Daniel
• RE: [PATCH 1/3] tty: n_gsm: fix buffer over-read in gsm_dlci_data()
  • From: Starke, Daniel
• Re: [PATCH 1/3] termbits.h: create termbits-common.h for identical bits
  • From: Helge Deller
• Re: [PATCH 1/3] tty: n_gsm: fix buffer over-read in gsm_dlci_data()
  • From: Jiri Slaby
• Re: [PATCH RESEND] serial: men_z135_uart: Drop duplicated iotype assignment
  • From: Jiri Slaby
• Re: [PATCH 2/3] tty: n_gsm: fix mux activation issues in gsm_config()
  • From: Jiri Slaby
• Re: [PATCH 3/3] tty: n_gsm: fix invalid gsmtty_write_room() result
  • From: Jiri Slaby
• Re: [PATCH] fsl_lpuart: Don't enable interrupts too early
  • From: Jiri Slaby
• [PATCH 3/3] termbits.h: Remove posix_types.h include
  • From: Ilpo Järvinen
• [PATCH 2/3] termbits.h: Align lines & format
  • From: Ilpo Järvinen
• [PATCH 1/3] termbits.h: create termbits-common.h for identical bits
  • From: Ilpo Järvinen
• [PATCH 0/3] termbits.h: Further improvements
  • From: Ilpo Järvinen
• Re: [PATCH 2/2] tty: n_gsm: fix deadlock and link starvation in outgoing data path
  • From: Jiri Slaby
• Re: [PATCH v1] serial: meson: acquire port->lock in startup()
  • From: Neil Armstrong
• Re: [PATCH v1] serial: meson: acquire port->lock in startup()
  • From: Jiri Slaby
• [PATCH v1] serial: meson: acquire port->lock in startup()
  • From: John Ogness
• [PATCH v2 3/4] powerpc/52xx: Get rid of of_node assignment
  • From: Andy Shevchenko
• [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Andy Shevchenko
• [PATCH v2 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq()
  • From: Andy Shevchenko
• [PATCH v2 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Andy Shevchenko
• tty: fix a possible hang on tty device
  • From: cael
• [PATCH next v1] serial: msm_serial: disable interrupts in __msm_console_write()
  • From: John Ogness
• [PATCH 2/2] tty: n_gsm: fix deadlock and link starvation in outgoing data path
  • From: D. Starke
• [PATCH 1/2] tty: n_gsm: fix user open not possible at responder until initiator open
  • From: D. Starke
• RE: [PATCH] fsl_lpuart: Don't enable interrupts too early
  • From: Sherry Sun
• RE: 9 bit serial / non-blocking TCSADRAIN
  • From: David Laight
• Re: [PATCH 6/7] serial: uartps: Fix the ignore_status
  • From: Greg KH
• Re: [PATCH 7/7] serial: uartps: Prevent writes when the controller is disabled
  • From: Greg KH
• Re: [PATCH 5/7] tty: xilinx_uartps: Make the timeout unsigned
  • From: Greg KH
• Re: [PATCH 2/7] tty: xilinx_uartps: Check the clk_enable return value
  • From: Greg KH
• Re: [PATCH 4/7] tty: xilinx_uartps: Check clk_enable return value
  • From: Greg KH
• Re: [PATCH 3/7] tty: xilinx_uartps: Add check for runtime_get_sync calls
  • From: Greg KH
• Re: [PATCH 0/7] tty: xilinx_uartps: fixes and improvements
  • From: Greg KH
• Re: [PATCH v2] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
  • From: Greg KH
• 9 bit serial / non-blocking TCSADRAIN
  • From: Baltazár Radics
• Re: [PATCH] tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
  • From: Baruch Siach
• Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Bartosz Golaszewski
• [PATCH] tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
  • From: Yang Yingliang
• [PATCH] fsl_lpuart: Don't enable interrupts too early
  • From: Indan Zupancic
• Re: [PATCH 1/1] termbits: Convert octal defines to hex
  • From: Arnd Bergmann
• Re: [PATCH 1/1] termbits: Convert octal defines to hex
  • From: Ilpo Järvinen
• Re: [PATCH 0/2] Disable MMIO tracing from QUP wrapper and serial driver
  • From: Sai Prakash Ranjan
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: kernel test robot
• Re: [PATCH 2/2] serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode
  • From: Marek Vasut
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Chris Packham
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: kernel test robot
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Rob Herring
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Jonathan Cameron
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Wolfram Sang
• Re: [PATCH v1 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq()
  • From: Wolfram Sang
• Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang
• Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang
• Re: [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang
• Re: [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang
• Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang
• Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang
• Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang
• Re: [PATCH 2/2] serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode
  • From: Erwan LE RAY
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Mark Brown
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Damien Le Moal
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Marc Kleine-Budde
• [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Andy Shevchenko
• [PATCH v1 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Andy Shevchenko
• [PATCH v1 3/4] powerpc/52xx: Get rid of of_node assignment
  • From: Andy Shevchenko
• [PATCH v1 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq()
  • From: Andy Shevchenko
• Re: [PATCH 1/1] termbits: Convert octal defines to hex
  • From: Arnd Bergmann
• Re: [PATCH 1/1] termbits: Convert octal defines to hex
  • From: Michael Ellerman
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Ulf Hansson
• [PATCH v4 1/2] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  • From: Phil Edworthy
• [PATCH v4 0/2] Add new Renesas RZ/V2M SoC and Renesas RZ/V2M EVK support
  • From: Phil Edworthy
• Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Joerg Roedel
• Re: [PATCH 1/1] termbits: Convert octal defines to hex
  • From: Ilpo Järvinen
• [PATCH 1/3] tty: n_gsm: fix buffer over-read in gsm_dlci_data()
  • From: D. Starke
• [PATCH 2/3] tty: n_gsm: fix mux activation issues in gsm_config()
  • From: D. Starke
• [PATCH 3/3] tty: n_gsm: fix invalid gsmtty_write_room() result
  • From: D. Starke
• RE: [PATCH v3 01/12] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  • From: Phil Edworthy
• Re: [PATCH v3 01/12] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  • From: Geert Uytterhoeven
• Re: [PATCH 1/1] termbits: Convert octal defines to hex
  • From: Arnd Bergmann
• [PATCH RESEND] serial: men_z135_uart: Drop duplicated iotype assignment
  • From: Ilpo Järvinen
• [PATCH 1/1] termbits: Convert octal defines to hex
  • From: Ilpo Järvinen
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Vinod Koul
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Marc Kleine-Budde
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Mark Brown
• [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Rob Herring
• Re: [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski
• Re: [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski
• Re: [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski
• Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski
• Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski
• Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/2] serial: 8250: core: Remove unneeded <linux/pm_runtime.h>
  • From: Ilpo Järvinen
• [PATCH v3 01/12] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  • From: Phil Edworthy
• [PATCH v3 00/12] Add new Renesas RZ/V2M SoC and Renesas RZ/V2M EVK support
  • From: Phil Edworthy
• Re: [PATCH 1/2] serial: 8250: core: Remove unneeded <linux/pm_runtime.h>
  • From: Andy Shevchenko
• Re: [PATCH 1/7] serial: pch: move size check from pop_tx one level up
  • From: Andy Shevchenko
• Re: [PATCH v6 10/12] ARM: dts: r9a06g032: Fill the UART DMA properties
  • From: Geert Uytterhoeven
• [PATCH 4/7] serial: pch: remove debug print from pop_tx
  • From: Jiri Slaby
• [PATCH 7/7] serial: pch: inline pop_tx() into handle_tx()
  • From: Jiri Slaby
• [PATCH 2/7] serial: pch: don't overwrite xmit->buf[0] by x_char
  • From: Jiri Slaby
• [PATCH 6/7] serial: pch: simplify pop_tx() even more
  • From: Jiri Slaby
• [PATCH 3/7] serial: pch: decomission pch_uart_hal_write()
  • From: Jiri Slaby
• [PATCH 5/7] serial: pch: remove xmit circ_buf size double check
  • From: Jiri Slaby
• [PATCH 0/7] serial: pch: cleanup
  • From: Jiri Slaby
• [PATCH 1/7] serial: pch: move size check from pop_tx one level up
  • From: Jiri Slaby
• [PATCH 11/11] serial: pic32: restore disabled irqs in pic32_uart_startup()
  • From: Jiri Slaby
• [PATCH 08/11] serial: pic32: don't assign pic32_sport::cts_gpio twice
  • From: Jiri Slaby
• [PATCH 07/11] serial: pic32: convert to_pic32_sport() to an inline
  • From: Jiri Slaby
• [PATCH 09/11] serial: pic32: don't zero members of kzalloc-ated structure
  • From: Jiri Slaby
• [PATCH 02/11] serial: pic32: move header content to .c
  • From: Jiri Slaby
• [PATCH 10/11] serial: pic32: free up irq names correctly
  • From: Jiri Slaby
• [PATCH 06/11] serial: pic32: remove pic32_get_port() macro
  • From: Jiri Slaby
• [PATCH 04/11] serial: pic32: simplify clk handling
  • From: Jiri Slaby
• [PATCH 05/11] serial: pic32: simplify pic32_sport::enable_tx_irq handling
  • From: Jiri Slaby
• [PATCH 03/11] serial: pic32: remove constants from struct pic32_sport
  • From: Jiri Slaby
• [PATCH 00/11] serial: pic32: cleanup
  • From: Jiri Slaby
• [PATCH 01/11] serial: pic32: remove unused items from the header
  • From: Jiri Slaby
• Re: [PATCH] tty: serial: samsung_tty: Fix suspend/resume on S5L
  • From: Krzysztof Kozlowski
• [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven
• [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven
• [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven
• [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven
• [PATCH 0/7] dt-bindings: renesas: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven
• [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven
• [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven
• [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven
• Re: [PATCH] tty: serial: samsung_tty: Fix suspend/resume on S5L
  • From: Hector Martin
• [PATCH 2/2] serial: 8250: pxa: Remove unneeded <linux/pm_runtime.h>
  • From: Geert Uytterhoeven
• [PATCH 1/2] serial: 8250: core: Remove unneeded <linux/pm_runtime.h>
  • From: Geert Uytterhoeven
• Re: [PATCH] serial: 8250: dw: Fix NULL pointer dereference
  • From: Andy Shevchenko
• Re: [PATCH 2/2] tty: serial: qcom_geni_serial: Disable MMIO tracing
  • From: Greg KH
• Re: [PATCH 0/2] Disable MMIO tracing from QUP wrapper and serial driver
  • From: Greg KH
• Re: [PATCH 1/2] soc: qcom: geni: Disable MMIO tracing
  • From: Greg KH
• [PATCH] serial: 8250: dw: Fix NULL pointer dereference
  • From: Heikki Krogerus
• Re: [PATCH] tty: serial: samsung_tty: Fix suspend/resume on S5L
  • From: Greg Kroah-Hartman
• Re: [PATCH 2/2] serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode
  • From: Marek Vasut
• [PATCH 2/2] tty: serial: qcom_geni_serial: Disable MMIO tracing
  • From: Vijaya Krishna Nivarthi
• [PATCH 1/2] soc: qcom: geni: Disable MMIO tracing
  • From: Vijaya Krishna Nivarthi
• [PATCH 0/2] Disable MMIO tracing from QUP wrapper and serial driver
  • From: Vijaya Krishna Nivarthi
• [PATCH] serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  • From: Vijaya Krishna Nivarthi
• [PATCH] tty: serial: samsung_tty: Fix suspend/resume on S5L
  • From: Hector Martin
• Re: [RFC v2 34/39] tty: serial: add HAS_IOPORT dependencies
  • From: Maciej W. Rozycki
• Re: [PATCH 2/2] serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode
  • From: Erwan LE RAY
• [tty:tty-testing] BUILD SUCCESS 1e70d57e7285996bcf0a226eac8c5ba43a89f85d
  • From: kernel test robot
• [tty:tty-linus] BUILD SUCCESS 19317433057dc1f2ca9a975e4e6b547282c2a5ef
  • From: kernel test robot
• Re: [GIT PULL] TTY/Serial driver fixes for 5.18-rc5
  • From: pr-tracker-bot
• [PATCH 1/2] serial: stm32: Factor out GPIO RTS toggling into separate function
  • From: Marek Vasut
• [PATCH 2/2] serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode
  • From: Marek Vasut
• [GIT PULL] TTY/Serial driver fixes for 5.18-rc5
  • From: Greg KH
• [PATCH 2/2] serial: sifive: Remove duplicate `clkin_rate' setting
  • From: Maciej W. Rozycki
• [PATCH 0/2] serial: sifive: Correct/improve baud base handling
  • From: Maciej W. Rozycki
• [PATCH 1/2] serial: sifive: Report actual baud base rather than fixed 115200
  • From: Maciej W. Rozycki
• Re: [PATCH 22/41] ARM: omap1: move plat/dma.c to mach/omap-dma.c
  • From: Péter Ujfalusi
• Re: [PATCH 21/41] ARM: omap1: dma: remove omap2 specific bits
  • From: Péter Ujfalusi
• Re: [PATCH 19/41] ARM: omap: dma: make usb support optional
  • From: Péter Ujfalusi
• Re: [PATCH 29/37] tty: serial: add HAS_IOPORT dependencies
  • From: Niklas Schnelle
• [RFC v2 34/39] tty: serial: add HAS_IOPORT dependencies
  • From: Niklas Schnelle
• [PATCH 29/37] tty: serial: add HAS_IOPORT dependencies
  • From: Niklas Schnelle
• Re: [PATCH v2] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
  • From: Ilpo Järvinen
• Re: [PATCH v2] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
  • From: Greg KH
• [PATCH v2] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
  • From: Ilpo Järvinen
• [PATCH] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
  • From: Ilpo Järvinen
• [PATCH 7/7] serial: uartps: Prevent writes when the controller is disabled
  • From: Shubhrajyoti Datta
• [PATCH 6/7] serial: uartps: Fix the ignore_status
  • From: Shubhrajyoti Datta
• [PATCH 5/7] tty: xilinx_uartps: Make the timeout unsigned
  • From: Shubhrajyoti Datta
• [PATCH 4/7] tty: xilinx_uartps: Check clk_enable return value
  • From: Shubhrajyoti Datta
• [PATCH 2/7] tty: xilinx_uartps: Check the clk_enable return value
  • From: Shubhrajyoti Datta
• [PATCH 1/7] xilinx: Update copyright text to correct format
  • From: Shubhrajyoti Datta
• [PATCH 3/7] tty: xilinx_uartps: Add check for runtime_get_sync calls
  • From: Shubhrajyoti Datta
• [PATCH 0/7] tty: xilinx_uartps: fixes and improvements
  • From: Shubhrajyoti Datta
• Re: [RFC PATCH] serial: Don't assume uart_ops .throttle is always set
  • From: Ilpo Järvinen
• Re: [RFC PATCH] serial: Don't assume uart_ops .throttle is always set
  • From: Tomasz Mon
• Re: [RFC PATCH] serial: Don't assume uart_ops .throttle is always set
  • From: Greg KH
• [RFC PATCH] serial: Don't assume uart_ops .throttle is always set
  • From: Ilpo Järvinen
• Re: pl011 (Raspberry Pi) crash
  • From: Ilpo Järvinen
• pl011 (Raspberry Pi) crash
  • From: Nuno Gonçalves
• Re: [PATCH v6 10/12] ARM: dts: r9a06g032: Fill the UART DMA properties
  • From: Geert Uytterhoeven
• RE: [PATCH v2 6/7] arm64: dts: renesas: Add Renesas R8A779G0 SoC support
  • From: Yoshihiro Shimoda
• RE: [PATCH v2 5/7] clk: renesas: cpg-mssr: Add support for R-Car V4H
  • From: Yoshihiro Shimoda
• Re: [PATCH v3 1/1] soc: fujitsu: Add A64FX diagnostic interrupt driver
  • From: Arnd Bergmann
• Re: [PATCH v3 1/1] soc: fujitsu: Add A64FX diagnostic interrupt driver
  • From: hasegawa-hitomi@xxxxxxxxxxx
• Re: [PATCH v2 7/7] arm64: dts: renesas: Add Renesas White Hawk boards support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 6/7] arm64: dts: renesas: Add Renesas R8A779G0 SoC support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 5/7] clk: renesas: cpg-mssr: Add support for R-Car V4H
  • From: Geert Uytterhoeven
• [PATCH 2/3] serial: 8250_mtk: Make sure to select the right FEATURE_SEL
  • From: AngeloGioacchino Del Regno
• [PATCH 1/3] serial: 8250_mtk: Fix UART_EFR register address
  • From: AngeloGioacchino Del Regno
• [PATCH 3/3] serial: 8250_mtk: Fix register address for XON/XOFF character
  • From: AngeloGioacchino Del Regno
• [PATCH 0/3] MediaTek 8250 UART: fixes and improvements
  • From: AngeloGioacchino Del Regno
• Re: [PATCH v5 05/10] serial: termbits: ADDRB to indicate 9th bit addressing mode
  • From: Ilpo Järvinen