Linux Serial
[Prev Page][Next Page]
- Re: [PATCH] serial: lantiq: add missing interrupt ack
- Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
- [PACTH v4 -next] tty: serial: add panic serial helper
- Re: [PATCH v3 -next] tty: serial: add panic serial helper
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v3 -next] tty: serial: add panic serial helper
- [PATCH v13 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- [PATCH v13 07/10] arm64: dts: nuvoton: Add initial ma35d1 device tree
- [PATCH v13 09/10] reset: Add Nuvoton ma35d1 reset driver support
- [PATCH v13 06/10] dt-bindings: serial: Document ma35d1 uart controller
- [PATCH v13 08/10] clk: nuvoton: Add clock driver for ma35d1 clock controller
- [PATCH v13 05/10] dt-bindings: arm: Add initial bindings for Nuvoton platform
- [PATCH v13 03/10] dt-bindings: clock: nuvoton: add binding for ma35d1 clock controller
- [PATCH v13 04/10] dt-bindings: reset: nuvoton: Document ma35d1 reset control
- [PATCH v13 01/10] arm64: Kconfig.platforms: Add config for Nuvoton MA35 platform
- [PATCH v13 02/10] arm64: defconfig: Add support for Nuvoton MA35 family SoCs
- [PATCH v13 00/10] Introduce Nuvoton ma35d1 SoC
- Re: [PATCH v3 -next] tty: serial: add panic serial helper
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- [tty:tty-testing] BUILD SUCCESS 49c80922ff8115bc86c82e5fc9e6842cd87db689
- [PATCH v3 -next] tty: serial: add panic serial helper
- Re: [PATCH v7 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v7 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v7 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v7 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v7 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [GIT PULL] TTY/Serial driver fixes for 6.4-rc5
- Re: [PATCH v7 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH] serial: st-asc: fix typo in property name
- From: Raphael Gallais-Pou
- [GIT PULL] TTY/Serial driver fixes for 6.4-rc5
- Re: [PATCH v7 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v2 -next] tty: serial: add panic serial helper
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v7 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH v7 7/9] serial: sc16is7xx: add call to get rs485 DT flags and properties
- [PATCH v7 9/9] serial: sc16is7xx: improve comments about variants
- [PATCH v7 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH v7 8/9] serial: sc16is7xx: add post reset delay
- [PATCH v7 6/9] serial: sc16is7xx: fix bug when first setting GPIO direction
- [PATCH v7 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- [PATCH v7 4/9] dt-bindings: sc16is7xx: Add property to change GPIO function
- [PATCH v7 2/9] serial: sc16is7xx: mark IOCONTROL register as volatile
- [PATCH v7 3/9] serial: sc16is7xx: refactor GPIO controller registration
- [PATCH v7 1/9] serial: sc16is7xx: fix broken port 0 uart init
- Re: [PATCH] serial: lantiq: add missing interrupt ack
- Re: [PATCH v2 1/1] serial: core: Fix error handling for serial_core_ctrl_device_add()
- [PATCH] serial: lantiq: add missing interrupt ack
- Re: [PATCH v6 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v6 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v2] serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v2] serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [tty:tty-testing 19/19] legacy_serial.c:undefined reference to `fsl8250_handle_irq'
- Re: [PATCH v2 1/1] serial: core: Fix error handling for serial_core_ctrl_device_add()
- [PATCH v2 1/1] serial: core: Fix error handling for serial_core_ctrl_device_add()
- Re: [PATCH] serial: core: Fix error handling for serial_core_ctrl_device_add()
- Re: [PATCH] serial: core: Fix error handling for serial_core_ctrl_device_add()
- Re: [PATCH] serial: core: Fix error handling for serial_core_ctrl_device_add()
- [PATCH] serial: core: Fix error handling for serial_core_ctrl_device_add()
- [tty:tty-testing] BUILD REGRESSION 3a3d09a9ee0ef5b417d6bdf8486a4da2bef06dc3
- [tty:tty-linus] BUILD SUCCESS 403e97d6ab2cb6fd0ac1ff968cd7b691771f1613
- RE: [PATCH] serial: qcom_geni_serial: Setup serial port after Deep sleep
- From: Mehul Raninga (Temp) (QUIC)
- [tty:tty-next] BUILD SUCCESS 539914240a01c7d68476d10c07b7f4f9a05d38ed
- [tty:tty-testing 19/19] legacy_serial.c:undefined reference to `fsl8250_handle_irq'
- Re: [PATCH v6 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH v2 -next] tty: serial: add panic serial helper
- Re: [PATCH v6 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v1 -next] tty: serial: add panic serial helper
- Re: [PATCH v6 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH v6 9/9] serial: sc16is7xx: improve comments about variants
- [PATCH v6 8/9] serial: sc16is7xx: add post reset delay
- [PATCH v6 6/9] serial: sc16is7xx: fix bug when first setting GPIO direction
- [PATCH v6 7/9] serial: sc16is7xx: add call to get rs485 DT flags and properties
- [PATCH v6 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH v6 4/9] dt-bindings: sc16is7xx: Add property to change GPIO function
- [PATCH v6 3/9] serial: sc16is7xx: refactor GPIO controller registration
- [PATCH v6 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- [PATCH v6 2/9] serial: sc16is7xx: mark IOCONTROL register as volatile
- [PATCH v6 1/9] serial: sc16is7xx: fix broken port 0 uart init
- Re: [PATCH v5 3/9] serial: sc16is7xx: refactor GPIO controller registration
- Re: [PATCH v5 3/9] serial: sc16is7xx: refactor GPIO controller registration
- [PATCH v5 6/9] serial: sc16is7xx: fix bug when first setting GPIO direction
- [PATCH v5 3/9] serial: sc16is7xx: refactor GPIO controller registration
- [PATCH v5 9/9] serial: sc16is7xx: improve comments about variants
- [PATCH v5 5/9] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH v5 4/9] dt-bindings: sc16is7xx: Add property to change GPIO function
- [PATCH v5 1/9] serial: sc16is7xx: fix broken port 0 uart init
- [PATCH v5 8/9] serial: sc16is7xx: add post reset delay
- [PATCH v5 2/9] serial: sc16is7xx: mark IOCONTROL register as volatile
- [PATCH v5 7/9] serial: sc16is7xx: add call to get rs485 DT flags and properties
- [PATCH v5 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- [PATCH] serial: core: Fix probing serial_base_bus devices
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH] serial: core: Don't drop port_mutex in serial_core_remove_one_port
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- [PATCH] serial: core: Don't drop port_mutex in serial_core_remove_one_port
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v2] serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
- From: Krzysztof Kozlowski
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v4 7/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH] serial: qcom_geni_serial: Setup serial port after Deep sleep
- Re: [PATCH v4 7/9] serial: sc16is7xx: fix regression with GPIO configuration
- [tty:tty-testing] BUILD SUCCESS 84a9582fd203063cd4d301204971ff2cd8327f1a
- Re: [PATCH v2 6/7] docs: update some straggling Documentation/arm references
- Re: [PATCH v2] serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
- Re: [PATCH v4 04/10] serial: bflb_uart: add Bouffalolab UART Driver
- Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH v4 04/10] serial: bflb_uart: add Bouffalolab UART Driver
- Re: [PATCH v4 04/10] serial: bflb_uart: add Bouffalolab UART Driver
- Re: [PATCH v4 7/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- RE: [PATCH] serial: qcom_geni_serial: Setup serial port after Deep sleep
- From: Mehul Raninga (Temp) (QUIC)
- [PATCH v2] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
- Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH v2] serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
- Re: [PATCH v2] serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
- Re: [PATCH v2] serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
- Re: [PATCH v2] serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
- [PATCH v2] serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
- [PATCH v1 -next] tty: serial: add panic serial helper
- Re: [RESEND RFC PATCH v3 -next] tty: serial: add panic serial helper
- Re: [PATCH v1] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
- From: Krzysztof Kozlowski
- [RESEND RFC PATCH v3 -next] tty: serial: add panic serial helper
- Re: [PATCH] serial: 8250: omap: mark uart_write() as maybe unused
- [PATCH] serial: 8250: omap: mark uart_write() as maybe unused
- [PATCH v1] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
- [tty:tty-testing] BUILD REGRESSION 617ece73dd240cb11869a224c879ca685a151a38
- [tty:tty-linus] BUILD SUCCESS 7183c37fd53eee1e795206e625da12a5d7ec1e1a
- Re: [PATCH v4 7/9] serial: sc16is7xx: fix regression with GPIO configuration
- [tty:tty-testing 13/17] 8250_fsl.c:(.text.fsl8250_handle_irq+0x140): undefined reference to `serial8250_rx_chars'
- [tty:tty-testing 13/17] m68k-linux-ld: 8250_fsl.c:undefined reference to `serial8250_modem_status'
- Re: [PATCH v4 7/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH v4 7/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH] serial: qcom_geni_serial: Setup serial port after Deep sleep
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v5 35/44] tty: serial: handle HAS_IOPORT dependencies
- Re: [PATCH v4 33/41] tty: serial: handle HAS_IOPORT dependencies
- Re: DT checker RS485 unevaluated property, 8250 OMAP UART
- Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- [tty:tty-next] BUILD SUCCESS 0e4daea31d8312dd9f957a62717d4b5f31ef494c
- Re: [PATCH v4 33/41] tty: serial: handle HAS_IOPORT dependencies
- Re: DT checker RS485 unevaluated property, 8250 OMAP UART
- From: Krzysztof Kozlowski
- Re: [PATCH v5 09/10] tty: n_gsm: expose configuration and statistics via proc fs
- Re: [PATCH v5 01/10] tty: n_gsm: add restart flag to DLC specific ioctl config
- Re: [PATCH] serial: 8250: omap: convert to modern PM ops
- [PATCH] serial: qcom_geni_serial: Setup serial port after Deep sleep
- Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH v4 33/41] tty: serial: handle HAS_IOPORT dependencies
- Re: [PATCH v4 04/10] serial: bflb_uart: add Bouffalolab UART Driver
- Re: [PATCH v4 7/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: DT checker RS485 unevaluated property, 8250 OMAP UART
- Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH v12 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- Re: [PATCH v12 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- [PATCH v12 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- [PATCH v12 08/10] clk: nuvoton: Add clock driver for ma35d1 clock controller
- [PATCH v12 03/10] dt-bindings: clock: nuvoton: add binding for ma35d1 clock controller
- [PATCH v12 07/10] arm64: dts: nuvoton: Add initial ma35d1 device tree
- [PATCH v12 05/10] dt-bindings: arm: Add initial bindings for Nuvoton platform
- [PATCH v12 06/10] dt-bindings: serial: Document ma35d1 uart controller
- [PATCH v12 04/10] dt-bindings: reset: nuvoton: Document ma35d1 reset control
- [PATCH v12 09/10] reset: Add Nuvoton ma35d1 reset driver support
- [PATCH v12 00/10] Introduce Nuvoton ma35d1 SoC
- [PATCH v12 02/10] arm64: defconfig: Add support for Nuvoton MA35 family SoCs
- [PATCH v12 01/10] arm64: Kconfig.platforms: Add config for Nuvoton MA35 platform
- Re: [PATCH v2 6/7] docs: update some straggling Documentation/arm references
- Re: [PATCH v11 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH v11 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH v4 7/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH v4 6/9] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [PATCH v4 6/9] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [PATCH v4 6/9] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [PATCH v4 7/9] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v2 6/7] docs: update some straggling Documentation/arm references
- [PATCH v2 6/7] docs: update some straggling Documentation/arm references
- Re: [PATCH v4 6/9] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [PATCH v4 6/9] dt-bindings: sc16is7xx: Add property to change GPIO function
- [PATCH v4 9/9] serial: sc16is7xx: improve comments about variants
- [PATCH v4 8/9] serial: sc16is7xx: add call to get rs485 DT flags and properties
- [PATCH v4 7/9] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH v4 6/9] dt-bindings: sc16is7xx: Add property to change GPIO function
- [PATCH v4 5/9] serial: sc16is7xx: refactor GPIO controller registration
- [PATCH v4 4/9] serial: sc16is7xx: fix bug when first setting GPIO direction
- [PATCH v4 2/9] serial: sc16is7xx: add post reset delay
- [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- [PATCH v4 3/9] serial: sc16is7xx: fix broken port 0 uart init
- [PATCH v4 1/9] serial: sc16is7xx: mark IOCONTROL register as volatile
- Re: [PATCH v3 11/11] serial: sc16is7xx: add dump registers function
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: DT checker RS485 unevaluated property, 8250 OMAP UART
- From: Vignesh Raghavendra
- Re: [PATCH v3 09/11] serial: sc16is7xx: add I/O register translation offset
- Re: [PATCH v3 11/11] serial: sc16is7xx: add dump registers function
- Re: [PATCH v3 08/11] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v3 07/11] dt-bindings: sc16is7xx: Add property to change GPIO function
- [PATCH] dmaengine: pl330: Return DMA_PAUSED when transaction is paused
- Re: Possible regression in 8250_dw driver
- Re: Possible regression in 8250_dw driver
- Re: [PATCH tty v1 7/8] serial: 8250: lock port for UART_IER access in omap8250_irq()
- Re: [PATCH tty v1 3/8] serial: 8250: lock port for stop_rx() in omap8250_irq()
- Re: [PATCH tty v1 4/8] serial: core: lock port for start_rx() in uart_resume_port()
- Re: Possible regression in 8250_dw driver
- [PATCH] serial: Switch i2c drivers back to use .probe()
- Re: [PATCH tty v1 4/8] serial: core: lock port for start_rx() in uart_resume_port()
- Re: [PATCH tty v1 2/8] serial: core: lock port for stop_rx() in uart_suspend_port()
- Re: [PATCH v3 11/11] serial: sc16is7xx: add dump registers function
- RE: [PATCH tty v1 2/8] serial: core: lock port for stop_rx() in uart_suspend_port()
- From: Vijaya Krishna Nivarthi (Temp) (QUIC)
- Re: [PATCH v3 09/11] serial: sc16is7xx: add I/O register translation offset
- Re: [PATCH v2 1/2] soc: fsl: cpm1: Fix TSA and QMC dependencies in case of COMPILE_TEST
- Re: [PATCH tty v1 4/8] serial: core: lock port for start_rx() in uart_resume_port()
- Re: [PATCH v3 09/11] serial: sc16is7xx: add I/O register translation offset
- Re: [PATCH v3 09/11] serial: sc16is7xx: add I/O register translation offset
- Re: [PATCH v3 08/11] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v3 07/11] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [PATCH v3 05/11] serial: sc16is7xx: fix broken port 0 uart init
- Re: [PATCH v3 08/11] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v3 07/11] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [PATCH v3 06/11] serial: sc16is7xx: fix bug when first setting GPIO direction
- Re: [PATCH v3 04/11] serial: sc16is7xx: add post reset delay
- Re: [PATCH v3 03/11] serial: sc16is7xx: mark IOCONTROL register as volatile
- Re: [PATCH v3 00/11] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH v3 00/11] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH v3 00/11] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: [PATCH v3 04/11] serial: sc16is7xx: add post reset delay
- Re: [PATCH v3 10/11] serial: sc16is7xx: add call to get rs485 DT flags and properties
- Re: [PATCH v3 09/11] serial: sc16is7xx: add I/O register translation offset
- Re: [PATCH v3 08/11] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v3 11/11] serial: sc16is7xx: add dump registers function
- Re: [PATCH v3 09/11] serial: sc16is7xx: add I/O register translation offset
- Re: [PATCH v3 05/11] serial: sc16is7xx: fix broken port 0 uart init
- Re: [PATCH v3 08/11] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v3 07/11] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [PATCH v3 06/11] serial: sc16is7xx: fix bug when first setting GPIO direction
- Re: [PATCH v3 04/11] serial: sc16is7xx: add post reset delay
- Re: [PATCH v3 03/11] serial: sc16is7xx: mark IOCONTROL register as volatile
- Re: [PATCH v3 04/11] serial: sc16is7xx: add post reset delay
- Re: [PATCH v3 00/11] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: Possible regression in 8250_dw driver
- [PATCH tty v1 7/8] serial: 8250: lock port for UART_IER access in omap8250_irq()
- [PATCH tty v1 1/8] serial: 8250: lock port in startup() callbacks
- [PATCH tty v1 6/8] serial: 8250: lock port for omap8250_restore_regs()
- [PATCH tty v1 5/8] serial: 8250: lock port for rx_dma() callback
- [PATCH tty v1 2/8] serial: core: lock port for stop_rx() in uart_suspend_port()
- [PATCH tty v1 4/8] serial: core: lock port for start_rx() in uart_resume_port()
- [PATCH tty v1 3/8] serial: 8250: lock port for stop_rx() in omap8250_irq()
- [PATCH tty v1 8/8] serial: 8250: synchronize and annotate UART_IER access
- [PATCH tty v1 0/8] synchronize UART_IER access against console write
- Re: Possible regression in 8250_dw driver
- Re: Possible regression in 8250_dw driver
- Re: [PATCH 2/3] serial: 8250: Clear IIR.RDI in serial8250_clear_fifos()
- Re: [PATCH v11 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- Re: [RFC PATCH] serial: sc16is7xx: fix broken port 0 uart init
- Re: [PATCH] serial: sc16is7xx: mark IOCONTROL register as volatile
- Re: [PATCH] serial: sc16is7xx: improve comments about variants
- Re: [PATCH] serial: sc16is7xx: fix syntax error in comments
- [PATCH v3 09/11] serial: sc16is7xx: add I/O register translation offset
- [PATCH v3 11/11] serial: sc16is7xx: add dump registers function
- [PATCH v3 10/11] serial: sc16is7xx: add call to get rs485 DT flags and properties
- [PATCH v3 08/11] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH v3 07/11] dt-bindings: sc16is7xx: Add property to change GPIO function
- [PATCH v3 05/11] serial: sc16is7xx: fix broken port 0 uart init
- [PATCH v3 06/11] serial: sc16is7xx: fix bug when first setting GPIO direction
- [PATCH v3 03/11] serial: sc16is7xx: mark IOCONTROL register as volatile
- [PATCH v3 04/11] serial: sc16is7xx: add post reset delay
- [PATCH v3 02/11] serial: sc16is7xx: improve comments about variants
- [PATCH v3 01/11] serial: sc16is7xx: fix syntax error in comments
- [PATCH v3 00/11] serial: sc16is7xx: fix GPIO regression and rs485 improvements
- Re: Possible regression in 8250_dw driver
- Re: [RFC PATCH v2 1/2] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [PATCH 2/3] serial: 8250: Clear IIR.RDI in serial8250_clear_fifos()
- Re: [PATCH] serial: 8250_pci: remove unreachable code for ASIX devices
- Re: Regression: serial: imx: overrun errors on debug UART
- Re: Regression: serial: imx: overrun errors on debug UART
- Re: [PATCH 2/3] serial: 8250: Clear IIR.RDI in serial8250_clear_fifos()
- Re: Regression: serial: imx: overrun errors on debug UART
- [PATCH 3/3] serial: 8250-fsl: Only do the break workaround if IIR signals RLSI
- [PATCH 2/3] serial: 8250: Clear IIR.RDI in serial8250_clear_fifos()
- [PATCH 1/3] serial: 8250-fsl: Expand description of the MPC83xx UART's misbehaviour
- [PATCH 0/3] serial: 8250-fsl: Two fixes
- Re: [PATCH] serial: 8250_pci: remove unreachable code for ASIX devices
- Re: Possible regression in 8250_dw driver
- From: Linux regression tracking #adding (Thorsten Leemhuis)
- Re: Regression: serial: imx: overrun errors on debug UART
- Re: Possible regression in 8250_dw driver
- Re: [PATCH v11 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- [PATCH] serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
- Re: [PATCH v11 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- Re: Possible regression in 8250_dw driver
- Re: [PATCH v11 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- Re: Regression: serial: imx: overrun errors on debug UART
- Re: Regression: serial: imx: overrun errors on debug UART
- Re: Possible regression in 8250_dw driver
- Re: [PATCH v2 2/2] serial: cpm_uart: Fix a COMPILE_TEST dependency
- Re: [PATCH v2 2/2] serial: cpm_uart: Fix a COMPILE_TEST dependency
- Possible regression in 8250_dw driver
- [PATCH v2 1/2] soc: fsl: cpm1: Fix TSA and QMC dependencies in case of COMPILE_TEST
- [PATCH v2 2/2] serial: cpm_uart: Fix a COMPILE_TEST dependency
- [PATCH v2 0/2] Fix COMPILE_TEST dependencies for CPM uart, TSA and QMC
- Re: [PATCH 2/2] serial: cpm_uart: Fix a COMPILE_TEST dependency
- Re: [PATCH 2/2] serial: cpm_uart: Fix a COMPILE_TEST dependency
- Re: [PATCH 0/2] Fix COMPILE_TEST dependencies for CPM uart, TSA and QMC
- Re: [PATCH] tty: serial: fsl_lpuart: Check the return value of dmaengine_tx_status
- From: gregkh@xxxxxxxxxxxxxxxxxxx
- RE: [PATCH] tty: serial: fsl_lpuart: Check the return value of dmaengine_tx_status
- [PATCH v5 35/44] tty: serial: handle HAS_IOPORT dependencies
- Re: Regression: serial: imx: overrun errors on debug UART
- From: Linux regression tracking (Thorsten Leemhuis)
- [PATCH 1/2] soc: fsl: cpm1: Fix TSA and QMC dependencies in case of COMPILE_TEST
- [PATCH 2/2] serial: cpm_uart: Fix a COMPILE_TEST dependency
- [PATCH 0/2] Fix COMPILE_TEST dependencies for CPM uart, TSA and QMC
- Re: [PATCH v4 03/10] dt-bindings: serial: add documentation for Bouffalolab UART Driver
- [PATCH] tty: serial: fsl_lpuart: Check the return value of dmaengine_tx_status
- [RFC PATCH v3 -next] tty: serial: add panic serial helper
- [RFC PATCH v3 -next] tty: serial: add panic serial helper
- Re: [PATCH v4 01/10] dt-bindings: vendor-prefixes: add bouffalolab
- Re: [PATCH 2/2] serial: Make uart_remove_one_port() return void
- Re: [PATCH v4 06/10] dt-bindings: riscv: Add bouffalolab bl808 board compatibles
- Re: [PATCH v4 08/10] riscv: dts: bouffalolab: add Sipeed M1s SoM and Dock devicetree
- Re: [PATCH v4 06/10] dt-bindings: riscv: Add bouffalolab bl808 board compatibles
- Re: [PATCH v4 03/10] dt-bindings: serial: add documentation for Bouffalolab UART Driver
- Re: [PATCH v4 01/10] dt-bindings: vendor-prefixes: add bouffalolab
- [PATCH] serial: Indicate fintek option may also be required for RS232 support
- Re: [GIT PULL] TTY/Serial driver fixes for 6.4-rc3
- [GIT PULL] TTY/Serial driver fixes for 6.4-rc3
- Re: [PATCH 6/7] docs: update some straggling Documentation/arm references
- Re: [PATCH 6/7] docs: update some straggling Documentation/arm references
- Re: [RFC PATCH v2 2/2] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [RFC PATCH v2 2/2] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH 6/7] docs: update some straggling Documentation/arm references
- Re: [RFC PATCH v2 2/2] serial: sc16is7xx: fix regression with GPIO configuration
- DT checker RS485 unevaluated property, 8250 OMAP UART
- Re: [RFC PATCH v2 2/2] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [RFC PATCH v2 -next] tty: serial: add panic serial helper
- Re: [RFC PATCH v2 2/2] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [RFC PATCH v2 2/2] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [RFC PATCH v2 1/2] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [RFC PATCH v2 2/2] serial: sc16is7xx: fix regression with GPIO configuration
- Re: [PATCH v4 06/10] dt-bindings: riscv: Add bouffalolab bl808 board compatibles
- [PATCH] tty: serial: fsl_lpuart: use UARTCTRL_TXINV to send break instead of UARTCTRL_SBK
- RE: [PATCH] tty: serial: fsl_lpuart: make sure to turn off break before enabling CTS
- Re: [RFC PATCH v2 -next] tty: serial: add panic serial helper
- Re: [PATCH V3 0/6] ARM: dts: imx6ull: Fix dtbs_check warnings
- Re: [PATCH] serial: 8250: omap: convert to modern PM ops
- Re: [RFC PATCH v2 -next] tty: serial: add panic serial helper
- Re: [PATCH v4 08/10] riscv: dts: bouffalolab: add Sipeed M1s SoM and Dock devicetree
- Re: [PATCH v4 07/10] riscv: dts: bouffalolab: add the bl808 SoC base device tree
- Re: [PATCH v4 02/10] dt-bindings: interrupt-controller: Add bouffalolab bl808 plic
- Re: [PATCH v4 06/10] dt-bindings: riscv: Add bouffalolab bl808 board compatibles
- Re: [PATCH v4 03/10] dt-bindings: serial: add documentation for Bouffalolab UART Driver
- Re: [PATCH v4 01/10] dt-bindings: vendor-prefixes: add bouffalolab
- Re: [PATCH v4 03/10] dt-bindings: serial: add documentation for Bouffalolab UART Driver
- Re: [RFC PATCH v2 1/2] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [PATCH v3 06/10] dt-bindings: riscv: Add bouffalolab bl808 board compatibles
- [PATCH v4 10/10] riscv: defconfig: enable BOUFFALOLAB SoC
- [PATCH v4 09/10] MAINTAINERS: riscv: add entry for Bouffalolab SoC
- [PATCH v4 08/10] riscv: dts: bouffalolab: add Sipeed M1s SoM and Dock devicetree
- [PATCH v4 07/10] riscv: dts: bouffalolab: add the bl808 SoC base device tree
- [PATCH v4 06/10] dt-bindings: riscv: Add bouffalolab bl808 board compatibles
- [PATCH v4 05/10] riscv: add the Bouffalolab SoC family Kconfig option
- [PATCH v4 04/10] serial: bflb_uart: add Bouffalolab UART Driver
- [PATCH v4 03/10] dt-bindings: serial: add documentation for Bouffalolab UART Driver
- [PATCH v4 02/10] dt-bindings: interrupt-controller: Add bouffalolab bl808 plic
- [PATCH v4 01/10] dt-bindings: vendor-prefixes: add bouffalolab
- [PATCH v4 00/10] riscv: add Bouffalolab bl808 support
- [RFC PATCH v2 2/2] serial: sc16is7xx: fix regression with GPIO configuration
- [RFC PATCH v2 1/2] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [PATCH 1/2] dt-bindings: sc16is7xx: Add property to change GPIO function
- Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
- [RFC PATCH v2 -next] tty: serial: add panic serial helper
- Re: linux-next: Tree for May 15 (config SERIAL_CPM)
- Re: linux-next: Tree for May 15 (config SERIAL_CPM)
- Re: [PATCH 1/2] serial: stm32: Ignore return value of uart_remove_one_port() in .remove()
- Re: [PATCH 2/2] serial: Make uart_remove_one_port() return void
- [PATCH] serial: 8250: omap: convert to modern PM ops
- [RFC PATCH] serial: sc16is7xx: fix broken port 0 uart init
- Re: [PATCH 1/2] dt-bindings: sc16is7xx: Add property to change GPIO function
- [PATCH v5 08/10] tty: n_gsm: add DLCI specific rx/tx statistics
- [PATCH v5 07/10] tty: n_gsm: cleanup gsm_control_command and gsm_control_reply
- [PATCH v5 10/10] tty: n_gsm: add restart flag to extended ioctl config
- [PATCH v5 09/10] tty: n_gsm: expose configuration and statistics via proc fs
- [PATCH v5 05/10] tty: n_gsm: increase malformed counter for malformed control frames
- [PATCH v5 06/10] tty: n_gsm: increase gsm_mux unsupported counted where appropriate
- [PATCH v5 03/10] tty: n_gsm: remove unneeded initialization of ret in gsm_dlci_config
- [PATCH v5 04/10] tty: n_gsm: add open_error counter to gsm_mux
- [PATCH v5 01/10] tty: n_gsm: add restart flag to DLC specific ioctl config
- [PATCH v5 02/10] tty: n_gsm: add missing description to structs in gsmmux.h
- [PATCH 2/2] serial: sc16is7xx: fix regression with GPIO configuration
- [PATCH 1/2] dt-bindings: sc16is7xx: Add property to change GPIO function
- [PATCH] serial: sc16is7xx: mark IOCONTROL register as volatile
- Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
- [PATCH] serial: sc16is7xx: improve comments about variants
- [PATCH] serial: sc16is7xx: fix syntax error in comments
- Re: [RFC PATCH] Revert "sc16is7xx: Separate GPIOs from modem control lines"
- Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
- Re: [RFC PATCH -next] tty: serial: add panic serial helper
- Re: [RFC PATCH -next] tty: serial: add panic serial helper
- Re: [RFC PATCH -next] tty: serial: add panic serial helper
- Re: [RFC PATCH -next] tty: serial: add panic serial helper
- [RFC PATCH -next] tty: serial: add panic serial helper
- Re: [RFC PATCH] Revert "sc16is7xx: Separate GPIOs from modem control lines"
- Re: linux-next: Tree for May 15 (drivers/tty/serial/8250/8250_omap.c)
- Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
- Re: [RFC PATCH] Revert "sc16is7xx: Separate GPIOs from modem control lines"
- Re: [RFC PATCH] Revert "sc16is7xx: Separate GPIOs from modem control lines"
- Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
- From: Krzysztof Kozlowski
- Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
- Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
- [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
- [PATCH v4 33/41] tty: serial: handle HAS_IOPORT dependencies
- [PATCH] tty: serial: fsl_lpuart: make sure to turn off break before enabling CTS
- Re: [RFC PATCH] Revert "sc16is7xx: Separate GPIOs from modem control lines"
- [PATCH v11 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- [PATCH v11 09/10] reset: Add Nuvoton ma35d1 reset driver support
- [PATCH v11 08/10] clk: nuvoton: Add clock driver for ma35d1 clock controller
- [PATCH v11 07/10] arm64: dts: nuvoton: Add initial ma35d1 device tree
- [PATCH v11 06/10] dt-bindings: serial: Document ma35d1 uart controller
- [PATCH v11 04/10] dt-bindings: reset: nuvoton: Document ma35d1 reset control
- [PATCH v11 05/10] dt-bindings: arm: Add initial bindings for Nuvoton platform
- [PATCH v11 03/10] dt-bindings: clock: nuvoton: add binding for ma35d1 clock controller
- [PATCH v11 02/10] arm64: defconfig: Add support for Nuvoton MA35 family SoCs
- [PATCH v11 01/10] arm64: Kconfig.platforms: Add config for Nuvoton MA35 platform
- [PATCH v11 00/10] Introduce Nuvoton ma35d1 SoC
- Re: linux-next: Tree for May 15 (config SERIAL_CPM)
- Re: linux-next: Tree for May 15 (drivers/tty/serial/8250/8250_omap.c)
- Re: [PATCH v3 03/10] dt-bindings: serial: add documentation for Bouffalolab UART Driver
- Re: [RFC PATCH] Revert "sc16is7xx: Separate GPIOs from modem control lines"
- [RFC PATCH] Revert "sc16is7xx: Separate GPIOs from modem control lines"
- Re: [RFC PATCH] Revert "sc16is7xx: Separate GPIOs from modem control lines"
- Re: [PATCH] serial: 8250: omap: Move uart_write() inside PM section
- Re: [PATCH v4 1/4] devres: Provide krealloc_array
- RE: [PATCH v4 8/8] tty: n_gsm: add DLCI specific rx/tx statistics
- RE: [PATCH v4 1/8] tty: n_gsm: add restart flag to DLC specific ioctl config
- Re: [PATCH 2/2] serial: Make uart_remove_one_port() return void
- Re: [PATCH v4 1/4] devres: Provide krealloc_array
- Re: [PATCH 2/2] serial: Make uart_remove_one_port() return void
- [PATCH] serial: 8250: omap: Move uart_write() inside PM section
- Re: [PATCH 0/2] Add rs485 support to uartps driver
- Re: [PATCH v3 03/10] dt-bindings: serial: add documentation for Bouffalolab UART Driver
- From: Krzysztof Kozlowski
- Re: [PATCH] serial: 8250_pci: remove unreachable code for ASIX devices
- Re: [PATCH] serial: 8250_pci: remove unreachable code for ASIX devices
- [PATCH v2 -next] tty: serial: pl011: set UART011_CR_RXE in pl011_set_termios after port shutdown
- Re: [PATCH v3 03/10] dt-bindings: serial: add documentation for Bouffalolab UART Driver
- Re: [PATCH v3 06/10] dt-bindings: riscv: Add bouffalolab bl808 board compatibles
- Re: [PATCH v3 02/10] dt-bindings: interrupt-controller: Add bouffalolab bl808 plic
- Re: [PATCH v3 03/10] dt-bindings: serial: add documentation for Bouffalolab UART Driver
- [PATCH v3 10/10] riscv: defconfig: enable BOUFFALOLAB SoC
- [PATCH v3 09/10] MAINTAINERS: riscv: add entry for Bouffalolab SoC
- [PATCH v3 08/10] riscv: dts: bouffalolab: add Sipeed M1s SoM and Dock devicetree
- [PATCH v3 07/10] riscv: dts: bouffalolab: add the bl808 SoC base device tree
- [PATCH v3 06/10] dt-bindings: riscv: Add bouffalolab bl808 board compatibles
- [PATCH v3 05/10] riscv: add the Bouffalolab SoC family Kconfig option
- [PATCH v3 04/10] serial: bflb_uart: add Bouffalolab UART Driver
- [PATCH v3 03/10] dt-bindings: serial: add documentation for Bouffalolab UART Driver
- [PATCH v3 02/10] dt-bindings: interrupt-controller: Add bouffalolab bl808 plic
- [PATCH v3 01/10] dt-bindings: vendor-prefixes: add bouffalolab
- [PATCH v3 00/10] riscv: add Bouffalolab bl808 support
- [PATCH] serial: 8250_tegra: Fix an error handling path in tegra_uart_probe()
- Re: [PATCH 0/2] Add rs485 support to uartps driver
- Re: [PATCH v11 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH V3 6/6] ARM: dts: imx6ul: Add clock and PGC node to GPC
- Re: [PATCH V3 5/6] ARM: dts: imx: Adjust dma-apbh node name
- [tty:tty-linus] BUILD SUCCESS 8fb9ea65c9d1338b0d2bb0a9122dc942cdd32357
- [tty:tty-testing] BUILD SUCCESS d5b3d02d0b107345f2a6ecb5b06f98356f5c97ab
- Re: [PATCH v11 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v4 1/4] devres: Provide krealloc_array
- Re: [PATCH] serial: 8250_pci: remove unreachable code for ASIX devices
- Re: [Patch] serial: 8250_bcm7271: fix leak in `brcmuart_probe`
- Re: [PATCH v4 8/8] tty: n_gsm: add DLCI specific rx/tx statistics
- Re: [PATCH v4 1/8] tty: n_gsm: add restart flag to DLC specific ioctl config
- [PATCH 0/2] serial: Make uart_remove_one_port() return void
- [PATCH 2/2] serial: Make uart_remove_one_port() return void
- [PATCH 1/2] serial: stm32: Ignore return value of uart_remove_one_port() in .remove()
- Re: [PATCH v3] vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
- [PATCH v3] vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
- Re: [PATCH v2] vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
- [PATCH v4 6/6] serial: 8250_rt288x: Remove unnecessary UART_REG_UNMAPPED
- [PATCH v4 5/6] serial: 8250_rt288x: Name non-standard divisor latch reg
- [PATCH v4 4/6] serial: 8250: RT288x/Au1xxx code away from core
- [PATCH v4 3/6] serial: 8250: Add dl_read/write, bugs and mapsize into plat_serial8250_port
- [PATCH v4 2/6] serial: 8250: Document uart_8250_port's ->dl_read/write()
- [PATCH v4 0/6] serial: Separate RT288x/Au1xxx code into own file
- [PATCH v4 1/6] serial: 8250: Change dl_read/write to handle value as u32
- Re: [PATCH 0/2] Add rs485 support to uartps driver
- [PATCH v11 1/1] serial: core: Start managing serial controllers to enable runtime PM
- [PATCH v5 1/1] tty: serial: fsl_lpuart: optimize the timer based EOP logic
- [PATCH v2] vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
- RE: [PATCH 0/2] Add rs485 support to uartps driver
- From: Guntupalli, Manikanta
- Re: [PATCH] vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
- [PATCH] serial: 8250_pci: remove unreachable code for ASIX devices
- RE: [EXT] Re: [PATCH v4 1/1] tty: serial: fsl_lpuart: optimize the timer based EOP logic
- Re: [PATCH v2 2/2] serial: core: enable FIFO after resume
- Re: serial8250: can not change baudrate while the controller is busy
- Re: [PATCH v10 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- Re: [PATCH v4 1/1] tty: serial: fsl_lpuart: optimize the timer based EOP logic
- Re: [PATCH v2 0/2] serial: core: fix broken console after suspend
- Re: [PATCH v2 0/2] serial: core: fix broken console after suspend
- Re: [PATCH v3 3/6] serial: 8250: Add dl_read/write, bugs and mapsize into plat_serial8250_port
- Re: [PATCH v3 1/6] serial: 8250: Change dl_read/write to handle value as u32
- Re: [PATCH v10 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- [PATCH] vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
- [PATCH v4 1/1] tty: serial: fsl_lpuart: optimize the timer based EOP logic
- Re: [PATCH v10 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- Re: [PATCH v10 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- Re: [PATCH v10 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- [PATCH v3 6/6] serial: 8250_rt288x: Remove unnecessary UART_REG_UNMAPPED
- [PATCH v3 5/6] serial: 8250_rt288x: Name non-standard divisor latch reg
- [PATCH v3 4/6] serial: 8250: RT288x/Au1xxx code away from core
- [PATCH v3 3/6] serial: 8250: Add dl_read/write, bugs and mapsize into plat_serial8250_port
- [PATCH v3 2/6] serial: 8250: Document uart_8250_port's ->dl_read/write()
- [PATCH v3 1/6] serial: 8250: Change dl_read/write to handle value as u32
- [PATCH v3 0/6] serial: Separate RT288x/Au1xxx code into own file
- Re: serial8250: can not change baudrate while the controller is busy
- Re: [PATCH v10 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support
- [PATCH v4 4/4] serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
- [PATCH v4 0/4] devres: Provide krealloc_array
- [PATCH v4 3/4] iio: adc: Use devm_krealloc_array
- [PATCH v4 1/4] devres: Provide krealloc_array
- [PATCH v4 2/4] hwmon: pmbus: Use devm_krealloc_array
- Re: [PATCH v10 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v10 09/10] reset: Add Nuvoton ma35d1 reset driver support
- Re: [PATCH v10 08/10] clk: nuvoton: Add clock driver for ma35d1 clock controller
- Re: serial8250: can not change baudrate while the controller is busy
- Re: [PATCH v10 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v3 1/1] tty: serial: fsl_lpuart: optimize the timer based EOP logic
- [PATCH v3 1/1] tty: serial: fsl_lpuart: optimize the timer based EOP logic
- Re: [PATCH v10 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: serial8250: can not change baudrate while the controller is busy
- Re: [PATCH v10 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: serial8250: can not change baudrate while the controller is busy
- [PATCH] serial: 8250: Allow using ports higher than SERIAL_8250_RUNTIME_UARTS
- Re: [PATCH 1/4] serial: 8250: omap: Fix freeing of resources on failed register
- [PATCH v10 1/1] serial: core: Start managing serial controllers to enable runtime PM
- Re: [PATCH v10 09/10] reset: Add Nuvoton ma35d1 reset driver support
- Re: [PATCH v10 08/10] clk: nuvoton: Add clock driver for ma35d1 clock controller
- Re: serial8250: can not change baudrate while the controller is busy
- Re: [PATCH 1/4] serial: 8250: omap: Fix freeing of resources on failed register
- [PATCH 4/4] serial: 8250: omap: Shut down on remove for console uart
- [PATCH 3/4] serial: 8250: omap: Fix life cycle issues for interrupt handlers
- Re: [PATCH v10 09/10] reset: Add Nuvoton ma35d1 reset driver support
- [PATCH 2/4] serial: 8250: omap: Fix imprecise external abort for omap_8250_pm()
- [PATCH 1/4] serial: 8250: omap: Fix freeing of resources on failed register
- Re: [PATCH v10 06/10] dt-bindings: serial: Document ma35d1 uart controller
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]