From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
In shutdown, RX DMA channel is terminated. If the DMA RX callback is
scheduled but not yet executed, while a new RX DMA transfer is started, the
callback can be executed, and then disturb the ongoing RX DMA transfer.
To avoid such a case, call dmaengine_synchronize in shutdown, after the
DMA RX channel is terminated.
Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
---
drivers/tty/serial/stm32-usart.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 8fc0526be898..5e9cf0c48813 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1123,8 +1123,10 @@ static void stm32_usart_shutdown(struct uart_port *port)
dev_err(port->dev, "Transmission is not complete\n");
/* Disable RX DMA. */
- if (stm32_port->rx_ch)
+ if (stm32_port->rx_ch) {
stm32_usart_rx_dma_terminate(stm32_port);
+ dmaengine_synchronize(stm32_port->rx_ch);
+ }
/* flush RX & TX FIFO */
if (ofs->rqr != UNDEF_REG)
--
2.25.1
