Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: ARM and OMAP patches to avoid lockdep complaints
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] memory: omap-gpmc: make it explicitly non-modular
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• [PATCH 0/6] memory: remove modular usage from non-modular drivers
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• [PATCH] arm: omap1: fix ams-delta FIQ handler to work with sparse IRQ
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [RFC] [PATCH 0/3] media: an attempt to refresh omap1_camera driver
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [RFC] [PATCH 1/3] staging: media: omap1: drop videobuf-dma-sg mode
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [RFC] [PATCH 3/3] staging: media: omap1: use dmaengine
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [RFC] [PATCH 2/3] staging: media: omap1: convert to videobuf2
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH] mfd: twl6040: Handle mclk used for HPPLL and optional internal clock source
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 4/5] mfd: tps65217: Add power button as subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 1/5] mfd: tps65217: Add support for IRQs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 04/15] drivers: net: cpsw: ethtool: fix accessing to suspended device
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v3 1/5] mfd: tps65217: Add support for IRQs
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 04/15] drivers: net: cpsw: ethtool: fix accessing to suspended device
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH] ARM: OMAP2+: timer: add probe for clocksources
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2 4/5] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v3 5/5] Input: Add tps65217 power button driver
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v3 4/5] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v3 3/5] power_supply: tps65217-charger: Add support for IRQs
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v3 2/5] power_supply: tps65217-charger: Fix NULL deref during property export
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v3 1/5] mfd: tps65217: Add support for IRQs
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v3 0/5] mfd: tps65217: Add power-button and IRQ support
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH v10 00/14] USB OTG/dual-role framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 1/2] Input: rotary-encoder- Add support for absolute encoder
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v2 4/5] mfd: tps65217: Add power button as subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/5] mfd: tps65217: Add support for IRQs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [GIT PULL] omap-gpmc fixes for v4.7 rc cycle
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 1/5] mfd: tps65217: Add support for IRQs
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/7] arm: use the new LED disk activity trigger
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH] Fix omap gpmc OEEXTRADELAY and WEEXTRADELAY timing
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [PATCH] Fix omap gpmc OEEXTRADELAY and WEEXTRADELAY timing
  • From: <SebastienOcquidant@xxxxxxxxx>
• RE: [PATCH] Fix omap gpmc OEEXTRADELAY and WEEXTRADELAY timing
  • From: <SebastienOcquidant@xxxxxxxxx>
• ARM and OMAP patches to avoid lockdep complaints
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2+: Drop legacy board file for n900
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 04/15] drivers: net: cpsw: ethtool: fix accessing to suspended device
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 04/15] drivers: net: cpsw: ethtool: fix accessing to suspended device
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 1/5] mfd: tps65217: Add support for IRQs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 4/5] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix omap gpmc OEEXTRADELAY and WEEXTRADELAY timing
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 4/5] mfd: tps65217: Add power button as subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] Fix omap gpmc OEEXTRADELAY and WEEXTRADELAY timing
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 14/15] drivers: net: davinci_mdio: enable pm runtime auto for ti cpsw-mdio
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2+: Drop legacy board file for n900
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• RE: [PATCH] Fix omap gpmc OEEXTRADELAY and WEEXTRADELAY timing
  • From: <SebastienOcquidant@xxxxxxxxx>
• Re: [PATCH] Fix omap gpmc OEEXTRADELAY and WEEXTRADELAY timing
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [PATCH] Fix omap gpmc OEEXTRADELAY and WEEXTRADELAY timing
  • From: <SebastienOcquidant@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2+: Drop legacy board file for n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/15] drivers: net: cpsw: improve runtime pm
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 06/15] drivers: net: davinci_mdio: do pm runtime initialization later in probe
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 02/15] drivers: net: cpsw: check return code from pm runtime calls
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 05/15] drivers: net: cpsw: ndev: fix accessing to suspended device
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 07/15] drivers: net: davinci_mdio: remove pm runtime calls from suspend callbacks
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 03/15] drivers: net: cpsw: remove pm runtime calls from suspend callbacks
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 09/15] drivers: net: davinci_mdio: split reset function on init_clk and enable
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 01/15] drivers: net: cpsw: fix suspend when all ethX devices are down
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 15/15] ARM: dts: am335x/am437x/dra7: use new "ti,cpsw-mdio" compat string
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 13/15] net: davinci_mdio: introduce "ti,cpsw-mdio" compat string
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 14/15] drivers: net: davinci_mdio: enable pm runtime auto for ti cpsw-mdio
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 08/15] drivers: net: davinci_mdio: drop suspended and lock fields from mdio_data
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 12/15] net: davinci_mdio: document missed "ti,am4372-mdio" compat string
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 11/15] drivers: net: davinci_mdio: implement pm runtime auto mode
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 10/15] drivers: net: davinci_mdio: add pm runtime callbacks
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 04/15] drivers: net: cpsw: ethtool: fix accessing to suspended device
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2+: Drop legacy board file for n900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2+: Drop legacy board file for n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] rtc: omap: Support ext_wakeup configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2+: Drop legacy board file for n900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH 2/2] ARM: OMAP2+: Drop legacy board file for LDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] ARM: OMAP2+: Drop legacy board file for n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Drop last two remaining omap3 legacy board files
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] gpio: omap: make gpio numbering deterministical by using of aliases
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] rtc: omap: Support ext_wakeup configuration
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH] gpio: omap: make gpio numbering deterministical by using of aliases
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] omap-gpmc gta04 regression 4.7-rc1
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• [PATCH] extcon: palmas: Fix boot up state of VBUS when using GPIO detection
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] extcon: palmas: Fix boot up state of VBUS when using GPIO detection
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH] gpio: omap: make gpio numbering deterministical by using of aliases
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v10 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [Letux-kernel] omap-gpmc gta04 regression 4.7-rc1
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] gpio: omap: make gpio numbering deterministical by using of aliases
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] extcon: palmas: Fix boot up state of VBUS when using GPIO detection
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [tiL4.4-P PATCH] ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
  • From: Keerthy <a0393675@xxxxxx>
• [tiL4.4-P PATCH] ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH] RTC: Add functionality to read/write rtc scratch registers
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] extcon: palmas: Fix boot up state of VBUS when using GPIO detection
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH] gpio: omap: make gpio numbering deterministical by using of aliases
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [Letux-kernel] omap-gpmc gta04 regression 4.7-rc1
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 1/2 v2] gpio: omap: make gpio numbering deterministical by using of aliases
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 0/2 v2] gpio-omap: ensure a stable gpio numbering
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2 v2] ARM: dts: add aliases for ti,omap[234]-gpio devices
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] gpio: omap: make gpio numbering deterministical by using of aliases
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v10 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [PATCH] extcon: palmas: Fix boot up state of VBUS when using GPIO detection
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 1/5] mfd: tps65217: Add support for IRQs
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/5] mfd: tps65217: Add power-button and IRQ support
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/5] power_supply: tps65217-charger: Fix NULL deref during property export
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/5] power_supply: tps65217-charger: Add support for IRQs
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v2 5/5] Input: Add tps65217 power button driver
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/5] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] gpio: omap: make gpio numbering deterministical by using of aliases
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio: omap: make gpio numbering deterministical by using of aliases
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] gpio: omap: make gpio numbering deterministical by using of aliases
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v10 14/14] usb: host: xhci-plat: Add otg device to platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v10 01/14] usb: hcd: Initialize hcd->flags to 0
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v10 12/14] usb: hcd: Adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v10 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v10 00/14] USB OTG/dual-role framework
  • From: Roger Quadros <rogerq@xxxxxx>
• [GIT PULL] omap fixes for v4.7-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/7] ARM: OMAP: dmtimer: Do not call PM runtime functions when not needed.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCHv2 08/28] ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v10 00/14] USB OTG/dual-role framework
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [RESEND PATCHv2 08/28] ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] userspace API definitions for auto-focus coil
  • From: Pavel Machek <pavel@xxxxxx>
• [RESEND PATCHv2 04/28] ARM: OMAP2+: hwmod: use new ti_clk_get API to search for clock handles
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 01/28] clk: ti: add ti_clk_get helper API
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 00/28] clk: ti: hwmod clock type support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 28/28] ARM: dts: dra7: add hwmod module clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 27/28] ARM: dts: omap5: add hwmod module clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 24/28] ARM: dts: omap4: add hwmod module clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 02/28] clk: ti: dpll: use ti_clk_get to fetch ref/bypass clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 26/28] ARM: dts: am43xx: add hwmod module clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 03/28] ARM: OMAP2+: omap_device: create clock alias purely from DT data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 07/28] ARM: OMAP2+: timer: change order of hwmod data handling
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 25/28] ARM: dts: am33xx: add hwmod module clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 23/28] clk: ti: add support for omap4 module clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 06/28] ARM: OMAP2+: hwmod: fetch main_clk based on hwmod name
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 15/28] clk: ti: omap5: transition to usage of ti_clk_get
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 16/28] clk: ti: dra7: transition to usage of ti_clk_get
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 22/28] dt-bindings: clk: ti: Document module clock type
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 19/28] clk: ti: remove un-used definitions from public clk_hw_omap struct
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 21/28] clk: ti: am33xx: fix timer3/6 init time setup for module clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 20/28] clk: ti: mux: export mux clock APIs locally
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 17/28] clk: ti: dm814x: transition to usage of ti_clk_get
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 14/28] clk: ti: omap4: transition to usage of ti_clk_get
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 18/28] clk: ti: dm816x: cleanup any unnecessary clock aliases
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 08/28] ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 12/28] clk: ti: omap3: transition to usage of ti_clk_get
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 13/28] clk: ti: am43xx: transition to usage of ti_clk_get
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 10/28] clk: ti: omap2: transition to usage of ti_clk_get
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 11/28] clk: ti: am33xx: transition to usage of ti_clk_get
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 09/28] ARM: AM33xx: fix module_wait_ready without clkctrl register
  • From: Tero Kristo <t-kristo@xxxxxx>
• [RESEND PATCHv2 05/28] ARM: OMAP2+: clock: use the new ti_clk_get for fetching clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 5/7] ARM: OMAP: dmtimer: Do not call PM runtime functions when not needed.
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH 0/7] ir-rx51 driver fixes
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH 0/7] ir-rx51 driver fixes
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Applied "ASoC: fix ABE_TWL6040 dependency" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] ASoC: fix ABE_TWL6040 dependency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH 0/3] ARM: OMAP: DRA7: Update to latest TRM and cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v10 09/14] usb: of: add an API to get OTG device from USB controller node
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: add dual-role support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v11 09/14] usb: of: add an API to get OTG device from USB controller node
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH v10 09/14] usb: of: add an API to get OTG device from USB controller node
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 4/7] arm: use the new LED disk activity trigger
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v11 13/14] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v11 08/14] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v11 13/14] usb: gadget: udc: adapt to OTG core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH v11 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v11 13/14] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 4/7] arm: use the new LED disk activity trigger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 13/14] usb: gadget: udc: adapt to OTG core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v10 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 4/7] arm: use the new LED disk activity trigger
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [PATCH 5/7] ARM: OMAP: dmtimer: Do not call PM runtime functions when not needed.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 13/14] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v10 13/14] usb: gadget: udc: adapt to OTG core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v10 13/14] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 5/7] ARM: OMAP: dmtimer: Do not call PM runtime functions when not needed.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: add dual-role support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [balbi-usb:testing/next 64/67] otg.c:undefined reference to `usb_gadget_vbus_disconnect'
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] otg.c:undefined reference to `usb_gadget_vbus_disconnect'
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] otg.c:undefined reference to `usb_gadget_vbus_disconnect'
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: use destroy ctlr to destroy channels
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v10 13/14] usb: gadget: udc: adapt to OTG core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v10 08/14] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH] userspace API definitions for auto-focus coil
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v9 08/14] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v10 06/14] usb: gadget.h: Add OTG to gadget interface
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: add dual-role support
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH] userspace API definitions for auto-focus coil
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] userspace API definitions for auto-focus coil
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 08/14] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] otg.c:undefined reference to `usb_gadget_vbus_disconnect'
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH] userspace API definitions for auto-focus coil
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: use destroy ctlr to destroy channels
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] net: ethernet: ti: cpsw: remove rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: use destroy ctlr to destroy channels
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] net: ethernet: ti: cpsw: remove rx_descs property
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 0/8] ARM: dts: Add operating-points-v2 tables for TI platforms
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: use destroy ctlr to destroy channels
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Schuyler Patton <spatton@xxxxxx>
• [PATCH] net: ethernet: ti: cpsw: use destroy ctlr to destroy channels
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH 5/7] ARM: OMAP: dmtimer: Do not call PM runtime functions when not needed.
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• RE: Bringing up the BRCM43362 on Beaglebone Black
  • From: "Michael Eskowitz" <MichaelE@xxxxxxxxxxxxxxx>
• Re: Bringing up the BRCM43362 on Beaglebone Black
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• RE: Bringing up the BRCM43362 on Beaglebone Black
  • From: "Michael Eskowitz" <MichaelE@xxxxxxxxxxxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Bin Liu <b-liu@xxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: joerg Reisenweber <joerg@xxxxxxxxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Nishanth Menon <nm@xxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: joerg Reisenweber <joerg@xxxxxxxxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Bin Liu <b-liu@xxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: joerg Reisenweber <joerg@xxxxxxxxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH 0/8] ARM: dts: Add operating-points-v2 tables for TI platforms
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/3] ARM: OMAP: DRA7: Update to latest TRM and cleanup
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v7 0/4] usb: dwc3: dual-role support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 1/4] usb: dwc3: core.h: add some register definitions
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 3/4] ARM: dts: dra7*-evm: Enable dual-role for usb1
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 2/4] usb: dwc3: add dual-role support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 4/4] ARM: dts: am43xx: Enable dual-role on USB1
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 0/4] usb: dwc3: dual-role support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 02/14] usb: otg-fsm: Prevent build warning "VDBG" redefined
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 05/14] usb: otg-fsm: move host controller operations into usb_otg->hcd_ops
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 04/14] usb: otg-fsm: use usb_otg wherever possible
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 06/14] usb: gadget.h: Add OTG to gadget interface
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 09/14] usb: of: add an API to get OTG device from USB controller node
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 07/14] usb: otg: get rid of CONFIG_USB_OTG_FSM in favour of CONFIG_USB_OTG
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 11/14] usb: otg: use dev_vdbg() instead of VDBG()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 12/14] usb: hcd: Adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 10/14] usb: otg: add hcd companion support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 13/14] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 14/14] usb: host: xhci-plat: Add otg device to platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 01/14] usb: hcd: Initialize hcd->flags to 0
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 00/14] USB OTG/dual-role framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v8 5/9] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] pwms: pwm-ti*: Get the clock from the PWMSS parent when using old bindings
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v8 5/9] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v3 3/3] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v10 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: DRA7: hwmod: remove DSS addresses from hwmod
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: DRA7: hwmod: Remove QSPI address space entry from hwmod
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 2/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 8/9] ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 5/9] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v11 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Bringing up the BRCM43362 on Beaglebone Black
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: dts: DRA7: fix unit address of second PCIe instance
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: Add RFID eeprom node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: dts: omap5: add fref_xtal_ck support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 23/28] ARM: dts: DRA7: Add DT node for DES IP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Bringing up the BRCM43362 on Beaglebone Black
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: [PATCH v1 06/14] ARM: dts: omap5-board-common: Add pdmclk binding for audio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v5 1/7] ARM: dts: omap3: Add clocks to McBSP nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am335x-bone-common: Mark MAC as having only one PHY
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: Correct misspelling, "emda3" -> "edma3".
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra72-evm: Rename 3.3V regulator tag
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Bringing up the BRCM43362 on Beaglebone Black
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: [PATCH 0108/1529] Fix typo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am335x-icev2: Add DT node for TI PCA9536
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] ARM: dts: Add operating-points-v2 tables for TI platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 08/14] usb: otg: add OTG/dual-role core
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v10 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/5] ARM: dts: omap3-gta04: Various updates
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 6/6] ARM: dts: n900: enable lirc-rx51 driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 08/14] usb: otg: add OTG/dual-role core
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: dra7: Add OCMCRAM nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 5/9] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4 00/44] dma-mapping: Use unsigned long for dma_attrs
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 5/7] ARM: OMAP: dmtimer: Do not call PM runtime functions when not needed.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4 22/44] video: dma-mapping: Use unsigned long for dma_attrs
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 7/7] ARM: dts: n900: enable lirc-rx51 driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/3] ARM: OMAP: DRA7: Update to latest TRM and cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Bringing up the BRCM43362 on Beaglebone Black
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 13/14] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v10 11/14] usb: otg: use dev_dbg() instead of VDBG()
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v10 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] thermal: of-thermal: Fix setting of set_emul_temp hook
  • From: Keerthy <a0393675@xxxxxx>
• [PATCH v4 4/7] arm: use the new LED disk activity trigger
  • From: Stephan Linz <linz@xxxxxxxxxx>
• Re: [PATCHv2] device tree description for AD5820 camera auto-focus coil
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: joerg Reisenweber <joerg@xxxxxxxxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Bin Liu <b-liu@xxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH 4/6] mtd: nand: Add OMAP_GPMC as a dependency to MTD_NAND_OMAP2
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] memory: omap-gpmc: Enable omap-gpmc by default when dependency is met
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] memory: omap-gpmc: Enable omap-gpmc by default when dependency is met
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] memory: omap-gpmc: Enable omap-gpmc by default when dependency is met
  • From: kbuild test robot <lkp@xxxxxxxxx>
• RE: Bringing up the BRCM43362 on Beaglebone Black
  • From: "Michael Eskowitz" <MichaelE@xxxxxxxxxxxxxxx>
• [PATCH 0/6] ARM: OMAP2+: Don't force select OMAP_GPMC
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 4/6] mtd: nand: Add OMAP_GPMC as a dependency to MTD_NAND_OMAP2
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 1/6] ARM: omap2plus_defconfig: Enable OMAP GPMC
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 5/6] memory: omap-gpmc: Enable omap-gpmc by default when dependency is met
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 3/6] ARM: multi_v7_defconfig: Enable OMAP NAND drivers
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 6/6] ARM: OMAP2+: Don't force select OMAP_GPMC
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 2/6] ARM: multi_v7_defconfig: Enable OMAP GPMC
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH v10 11/14] usb: otg: use dev_dbg() instead of VDBG()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH] ARM: dts: DRA7: fix unit address of second PCIe instance
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v9 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mfd: omap-usb-tll: fix include of omap-usb.h
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v10 08/14] usb: otg: add OTG/dual-role core
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v9 13/14] usb: gadget: udc: adapt to OTG core
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH] ARM: Keystone: Introduce Kconfig option to compile in typical Keystone features
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v9 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v9 00/14] USB OTG/dual-role framework
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: Enable Errata 430973 for OMAP3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] foundation for omapdrm header clean-up series for 4.8
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: Enable Errata 430973 for OMAP3
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH v10 11/14] usb: otg: use dev_dbg() instead of VDBG()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v10 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 00/14] USB OTG/dual-role framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 12/14] usb: hcd: Adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 11/14] usb: otg: use dev_dbg() instead of VDBG()
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: DRA74x: fix DSS PLL2 addresses
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 4/7] arm: use the new LED disk activity trigger
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: Enable Errata 430973 for OMAP3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: Keystone: Introduce Kconfig option to compile in typical Keystone features
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Bringing up the BRCM43362 on Beaglebone Black
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v9 00/14] USB OTG/dual-role framework
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Schuyler Patton <spatton@xxxxxx>
• [PATCH v3 4/7] arm: use the new LED disk activity trigger
  • From: Stephan Linz <linz@xxxxxxxxxx>
• RE: Bringing up the BRCM43362 on Beaglebone Black
  • From: "Michael Eskowitz" <MichaelE@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] Documentation: DT: cpsw: remove rx_descs property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] mfd: omap-usb-tll: fix include of omap-usb.h
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH] irqchip/omap-intc: fix missing <linux/irqchip/irq-omap-intc.h> include
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] mfd: lp873x: Add lp873x PMIC support
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH v3 1/2] Documentation: mfd: LP873X: Add information for the mfd and regulator drivers
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH v3 2/2] mfd: lp873x: Add lp873x PMIC support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/8] mfd: tps65218: Use mfd_add_devices instead of of_platform_populate
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH] ARM: Keystone: Introduce Kconfig option to compile in typical Keystone features
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 1/2] Documentation: mfd: LP873X: Add information for the mfd and regulator drivers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/8] mfd: tps65218: Use mfd_add_devices instead of of_platform_populate
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v9 11/14] usb: otg: use dev_dbg() instead of VDBG()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [GIT PULL arm] Use _rcuidle tracepoints to allow tracing from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [GIT PULL arm] Use _rcuidle tracepoints to allow tracing from idle
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [PATCH v9 08/14] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: joerg Reisenweber <joerg@xxxxxxxxxxxx>
• Re: [PATCH v9 12/14] usb: hcd: Adapt to OTG core
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 12/14] usb: hcd: Adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 12/14] usb: hcd: Adapt to OTG core
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mfd: twl-core: Refactoring for add_numbered_child()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: joerg Reisenweber <joerg@xxxxxxxxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v9 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Applied "spi: Add DMA support for spi_flash_read()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] otg.c:undefined reference to `usb_gadget_vbus_disconnect'
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 08/14] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Keystone: Introduce Kconfig option to compile in typical Keystone features
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Applied "spi: Add DMA support for spi_flash_read()" to the spi tree
  • From: Vignesh R <vigneshr@xxxxxx>
• Applied "spi: Add DMA support for spi_flash_read()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v9 01/14] usb: hcd: Initialize hcd->flags to 0
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 00/14] USB OTG/dual-role framework
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 07/14] usb: otg: get rid of CONFIG_USB_OTG_FSM in favour of CONFIG_USB_OTG
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 06/14] usb: gadget.h: Add OTG to gadget interface
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 04/14] usb: otg-fsm: use usb_otg wherever possible
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 09/14] usb: of: add an API to get OTG device from USB controller node
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v8 13/14] usb: gadget: udc: adapt to OTG core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH v9 11/14] usb: otg: use dev_dbg() instead of VDBG()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 12/14] usb: hcd: Adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 13/14] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 14/14] usb: host: xhci-plat: Add otg device to platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 02/14] usb: otg-fsm: Prevent build warning "VDBG" redefined
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 10/14] usb: otg: add hcd companion support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 05/14] usb: otg-fsm: move host controller operations into usb_otg->hcd_ops
  • From: Roger Quadros <rogerq@xxxxxx>
• [balbi-usb:testing/next 64/67] otg.c:undefined reference to `usb_gadget_vbus_disconnect'
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCH] pinctrl: single: Fix missing flush of posted write for a wakeirq
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v8 13/14] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [PATCH] ARM: dts: am335x-boneblack: add i2c1 DT entry
  • From: "Li, Yong B" <yong.b.li@xxxxxxxxx>
• Re: [PATCH v3 2/2] spi: spi-ti-qspi: Add DMA support for QSPI mmap read
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v3 1/2] spi: Add DMA support for spi_flash_read()
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 1/2] spi: Add DMA support for spi_flash_read()
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 2/2] spi: spi-ti-qspi: Add DMA support for QSPI mmap read
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 0/2] spi: Add DMA support for ti-qspi
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v5.1 3/5] thermal: streamline get_trend callbacks
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH v5.1 3/5] thermal: streamline get_trend callbacks
  • From: Keerthy <a0393675@xxxxxx>
• Re: [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH] dmaengine: edma: Use early completion for intermediate paRAM set in slave_sg
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [balbi-usb:testing/next 64/67] powercap_sys.c:undefined reference to `usb_gadget_vbus_connect'
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCH v3 1/2] spi: Add DMA support for spi_flash_read()
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] regulator: twl: fix use of integer as pointer
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-boneblack: add i2c1 DT entry
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] clk: ti: fapll: fix address space warnings
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Schuyler Patton <spatton@xxxxxx>
• [PATCH] clk: ti: fapll: fix address space warnings
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 1/2] net: ethernet: ti: cpsw: remove rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v2 2/2] Documentation: DT: cpsw: remove rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v2 0/2] net: ethernet: ti: cpsw: delete rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [GIT PULL] foundation for omapdrm header clean-up series for 4.8
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [PATCH v5.1 3/5] thermal: streamline get_trend callbacks
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/5] thermal: streamline get_trend callbacks
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• Re: Nokia N900: musb is in wrong state after boot
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 02/28] crypto: omap-sham: Don't idle/start SHA device between Encrypt operations
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] ARM: Keystone: Introduce Kconfig option to compile in typical Keystone features
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 02/28] crypto: omap-sham: Don't idle/start SHA device between Encrypt operations
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 01/28] crypto: omap-aes: Fix registration of algorithms
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/28] crypto: omap-sham: Don't idle/start SHA device between Encrypt operations
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] spi: spi-ti-qspi: Add DMA support for QSPI mmap read
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] mfd: twl6040: Handle mclk used for HPPLL and optional internal clock source
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] mfd: twl6040: Handle mclk used for HPPLL and optional internal clock source
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/2] spi: spi-ti-qspi: Add DMA support for QSPI mmap read
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] mfd: twl6040: Handle mclk used for HPPLL and optional internal clock source
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] ARM: DRA7: hwmod: remove DSS addresses from hwmod
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• [PATCH] dmaengine: edma: Use early completion for intermediate paRAM set in slave_sg
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 1/2] spi: Add DMA support for spi_flash_read()
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 0/2] spi: Add DMA support for ti-qspi
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 2/2] spi: spi-ti-qspi: Add DMA support for QSPI mmap read
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] ARM: Keystone: Introduce Kconfig option to compile in typical Keystone features
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCHv2] device tree description for AD5820 camera auto-focus coil
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] ARM: dts: DRA74x: fix DSS PLL2 addresses
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v5 3/5] thermal: streamline get_trend callbacks
  • From: Keerthy <a0393675@xxxxxx>
• RE: [PATCH] ARM: dts: am335x-boneblack: add i2c1 DT entry
  • From: "Li, Yong B" <yong.b.li@xxxxxxxxx>
• Re: omap-gpmc gta04 regression 4.7-rc1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Bringing up the BRCM43362 on Beaglebone Black
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-boneblack: add i2c1 DT entry
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 00/27] fb/drm: omapdss: Clean up the headers and separate the two stack
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/27] fb/drm: omapdss: Clean up the headers and separate the two stack
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: Keystone: Introduce Kconfig option to compile in typical Keystone features
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [balbi-usb:testing/next 64/67] drivers/usb/phy/phy-gpio-vbus-usb.c:200: undefined reference to `usb_gadget_vbus_disconnect'
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [balbi-usb:testing/next 64/67] drivers/usb/chipidea/otg.c:104: undefined reference to `usb_gadget_vbus_disconnect'
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCH] device tree description for AD5820 camera auto-focus coil
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• [balbi-usb:testing/next 64/67] phy-generic.c:undefined reference to `usb_gadget_vbus_connect'
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [PATCH v5 3/5] thermal: streamline get_trend callbacks
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• [PATCH v5 0/5] Thermal: Support for hardware-tracked trip points
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] mfd: lp873x: Add lp873x PMIC support
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH 3/8] mfd: tps65218: Use mfd_add_devices instead of of_platform_populate
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/2] mfd: lp873x: Add lp873x PMIC support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] userspace API definitions for auto-focus coil
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] userspace API definitions for auto-focus coil
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH v3 2/2] mfd: lp873x: Add lp873x PMIC support
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH v2 1/6] ir-rx51: Fix build after multiarch changes broke it
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] userspace API definitions for auto-focus coil
  • From: Pavel Machek <pavel@xxxxxx>
• omap-gpmc gta04 regression 4.7-rc1
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCHv5] support for AD5820 camera auto-focus coil
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCHv5] support for AD5820 camera auto-focus coil
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: dma_declare_coherent_memory fails for RAM allocated memory
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH] ARM: dts: omap3-gta04: Add RFID eeprom node
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: remove unused priv lock
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: fix rx-usecs interrupt pacing consistency
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [GIT PULL 1/2] omap fixes for v4.7 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 2/2] omap dts fixes for v4.7 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: remove rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: remove rx_descs property
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v8 0/9] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: "Franklin Cooper Jr." <fcooper@xxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: remove rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Bringing up the BRCM43362 on Beaglebone Black
  • From: "Michael Eskowitz" <MichaelE@xxxxxxxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: remove rx_descs property
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: remove unused priv lock
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: am335x-bone-common: Mark MAC as having only one PHY
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: am437x-idk-evm: Mark MAC as having only one PHY
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: fix rx-usecs interrupt pacing consistency
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3 00/27] fb/drm: omapdss: Clean up the headers and separate the two stack
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 00/27] fb/drm: omapdss: Clean up the headers and separate the two stack
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 01/27] ARM: OMAP: rx51-video: Do not set TV connector_type
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 02/27] ARM/video: omap2: Move omap_display_init declaration to mach-omap2/display.h
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 04/27] ARM: OMAP2: Use the platform_data header for omapdss
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 05/27] omapfb: panel-tpo-td028ttec1: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 03/27] video/platform_data: omapdss: Create new header file for platform data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 01/27] ARM: OMAP: rx51-video: Do not set TV connector_type
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 00/27] fb/drm: omapdss: Clean up the headers and separate the two stack
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 02/27] ARM/video: omap2: Move omap_display_init declaration to mach-omap2/display.h
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 03/27] video/platform_data: omapdss: Create new header file for platform data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 04/27] ARM: OMAP2: Use the platform_data header for omapdss
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 05/27] omapfb: panel-tpo-td028ttec1: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 06/27] omapfb: panel-nec-nl8048hl11: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 07/27] omapfb: panel-tpo-td043mtea1: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 08/27] omapfb: panel-sharp-ls037v7dw01: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 11/27] omapfb: connector-hdmi: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 10/27] omapfb: panel-dsi-cm: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 09/27] omapfb: panel-lgphilips-lb035q02: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 12/27] omapfb: connector-dvi: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 14/27] omapfb: encoder-tpd12s015: No need to include video/omap-panle-data.h
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 3/8] mfd: tps65218: Use mfd_add_devices instead of of_platform_populate
  • From: Keerthy <a0393675@xxxxxx>
• [PATCH v3 15/27] drm/omap: displays: Do not include video/omap-panel-data.h if not needed
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 13/27] omapfb: encoder-tfp410: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 17/27] drm/omap: connector-analog-tv: Support only Composite type in legacy boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 16/27] omapdss: omap-panel-data.h: Remove struct omap_dss_device declaration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 18/27] omapfb: connector-analog-tv: Support only Composite type in legacy boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 19/27] omapdss: omap-panel-data.h: Remove connector_type from atv pdata
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 21/27] omapfb: Remove reference to pdata->default_device
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 20/27] drm/omap: Remove reference to pdata->default_device
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 22/27] platform_data: omapdss: Remove unused members from omap_dss_board_info
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 24/27] drm/omap: Do not include video/omapdss.h directly in drivers
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 25/27] omapfb: Create new header file for omapfb DSS implementation
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 26/27] [media] omap_vout: Switch to use the video/omapfb_dss.h header file
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 27/27] drm/omap: Remove the video/omapdss.h and move it's content to local header file
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 23/27] omapdss: hdmi audio: Make header file independent of video/omapdss.h
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v3 00/27] fb/drm: omapdss: Clean up the headers and separate the two stack
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 06/27] omapfb: panel-nec-nl8048hl11: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 07/27] omapfb: panel-tpo-td043mtea1: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 08/27] omapfb: panel-sharp-ls037v7dw01: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 09/27] omapfb: panel-lgphilips-lb035q02: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 10/27] omapfb: panel-dsi-cm: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 12/27] omapfb: connector-dvi: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 11/27] omapfb: connector-hdmi: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 14/27] omapfb: encoder-tpd12s015: No need to include video/omap-panle-data.h
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 15/27] drm/omap: displays: Do not include video/omap-panel-data.h if not needed
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 13/27] omapfb: encoder-tfp410: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 16/27] omapdss: omap-panel-data.h: Remove struct omap_dss_device declaration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 17/27] drm/omap: connector-analog-tv: Support only Composite type in legacy boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 20/27] drm/omap: Remove reference to pdata->default_device
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 19/27] omapdss: omap-panel-data.h: Remove connector_type from atv pdata
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 21/27] omapfb: Remove reference to pdata->default_device
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 23/27] omapdss: hdmi audio: Make header file independent of video/omapdss.h
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 24/27] drm/omap: Do not include video/omapdss.h directly in drivers
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 22/27] platform_data: omapdss: Remove unused members from omap_dss_board_info
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 18/27] omapfb: connector-analog-tv: Support only Composite type in legacy boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 00/27] fb/drm: omapdss: Clean up the headers and separate the two stack
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] device tree description for AD5820 camera auto-focus coil
  • From: Pavel Machek <pavel@xxxxxx>
• RE: [PATCH] ARM: dts: am335x-boneblack: add i2c1 DT entry
  • From: "Li, Yong B" <yong.b.li@xxxxxxxxx>
• [PATCH] net: ethernet: ti: cpsw: remove rx_descs property
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH] net: ethernet: ti: cpsw: remove unused priv lock
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] device tree description for AD5820 camera auto-focus coil
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [balbi-usb:testing/next 64/67] drivers/usb/phy/phy-generic.c:190: undefined reference to `usb_gadget_vbus_connect'
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCHv5] support for AD5820 camera auto-focus coil
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [PATCH] device tree description for AD5820 camera auto-focus coil
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv5] support for AD5820 camera auto-focus coil
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] ARM: dts: am335x-boneblack: add i2c1 DT entry
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-boneblack: add i2c1 DT entry
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-boneblack: add i2c1 DT entry
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: dma_declare_coherent_memory fails for RAM allocated memory
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH v2 00/27] fb/drm: omapdss: Clean up the headers and separate the two stack
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] pinctrl: single: Fix missing flush of posted write for a wakeirq
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: fix rx-usecs interrupt pacing consistency
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH] net: ethernet: ti: cpsw: fix rx-usecs interrupt pacing consistency
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] pinctrl: single: Fix missing flush of posted write for a wakeirq
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 00/27] fb/drm: omapdss: Clean up the headers and separate the two stack
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v8 13/14] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] thermal: of-thermal: Fix setting of set_emul_temp hook
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH] ARM: dts: am335x-boneblack: add i2c1 DT entry
  • From: Yong Li <yong.b.li@xxxxxxxxx>
• Re: [PATCHv5] support for AD5820 camera auto-focus coil
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH 0/5] ARM: OMAP5: add support for fref-xtal-clk
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 02/28] crypto: omap-sham: Don't idle/start SHA device between Encrypt operations
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv5] support for AD5820 camera auto-focus coil
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/2] Documentation: dt: add bindings for ti-cpufreq
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 4/5] ARM: dts: omap5: add fref_xtal_ck support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 5/5] ARM: dts: omap5-board-common: Add phandle for mclk clock for twl6040
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/5] ARM: OMAP5: add support for fref-xtal-clk
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 3/5] ARM: OMAP5: control: add support for control module wkup pad config
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/5] ARM: dts: omap5: add support for control module wkup pad config
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/5] ARM: omap2+: control: add support for auxiliary control module instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] ARM: dts: Fix omap5 SDIO dat1 interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv5] support for AD5820 camera auto-focus coil
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: dma_declare_coherent_memory fails for RAM allocated memory
  • From: Brian Starkey <brian.starkey@xxxxxxx>
• Re: [PATCH 02/28] crypto: omap-sham: Don't idle/start SHA device between Encrypt operations
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 27/28] ARM: dts: AM43xx: clk: Add RNG clk node
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 28/28] ARM: dts: AM43xx: Add node for RNG
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 23/28] ARM: dts: DRA7: Add DT node for DES IP
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 26/28] ARM: dts: DRA7: Add DT node for RNG IP
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 25/28] ARM: dts: DRA7: Add support for SHA IP
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 24/28] ARM: dts: DRA7: Add DT nodes for AES IP
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 22/28] ARM: AMx3xx: hwmod: Add data for RNG
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 20/28] ARM: OMAP: DRA7xx: Make L4SEC clock domain SWSUP only
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 21/28] ARM: AM43xx: hwmod: Add data for DES
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 19/28] ARM: DRA7: hwmod: Add data for RNG IP
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 18/28] ARM: DRA7: hwmod: Add data for SHA IP
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 17/28] ARM: DRA7: hwmod: Add data for AES IP
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 16/28] ARM: DRA7: hwmod: Add data for DES IP
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 13/28] crypto: engine: avoid unnecessary context switches
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 14/28] crypto: omap-aes: fix crypto engine initialization order
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 00/28] crypto: omap fixes / support additions
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 01/28] crypto: omap-aes: Fix registration of algorithms
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 15/28] crypto: omap-des: fix crypto engine initialization order
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 12/28] crypto: omap-aes: Add fallback support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 07/28] crypto: ahash: increase the maximum allowed statesize
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 03/28] crypto: omap-sham: change queue size from 1 to 10
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 11/28] crypto: omap-aes: Add support for multiple cores
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 10/28] crypto: omap-aes - Fix enabling clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 08/28] crypto: omap-sham: implement context export/import APIs
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 09/28] crypto: omap-des: Fix support for unequal lengths
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 06/28] crypto: omap-sham: avoid executing tasklet where not needed
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 02/28] crypto: omap-sham: Don't idle/start SHA device between Encrypt operations
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 05/28] crypto: omap-sham: set sw fallback to 240 bytes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 04/28] crypto: omap: do not call dmaengine_terminate_all
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v2 01/27] omapfb: panel-tpo-td028ttec1: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 00/27] fb/drm: omapdss: Clean up the headers and separate the two stack
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 02/27] omapfb: panel-nec-nl8048hl11: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 04/27] omapfb: panel-sharp-ls037v7dw01: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 03/27] omapfb: panel-tpo-td043mtea1: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 05/27] omapfb: panel-lgphilips-lb035q02: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 06/27] omapfb: panel-dsi-cm: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 08/27] omapfb: connector-dvi: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 07/27] omapfb: connector-hdmi: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 09/27] omapfb: encoder-tfp410: Remove legacy boot support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 11/27] drm/omap: displays: Do not include video/omap-panel-data.h if not needed
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 10/27] omapfb: encoder-tpd12s015: No need to include video/omap-panle-data.h
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 12/27] omapdss: omap-panel-data.h: Remove struct omap_dss_device declaration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 14/27] omapfb: connector-analog-tv: Support only Composite type in legacy boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 13/27] drm/omap: connector-analog-tv: Support only Composite type in legacy boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 15/27] ARM: OMAP: rx51-video: Do not set TV connector_type
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 16/27] omapdss: omap-panel-data.h: Remove connector_type from atv pdata
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 17/27] ARM/video: omap2: Move omap_display_init declaration to mach-omap2/display.h
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 21/27] video/platform_data: omapdss: Create new header file for platform data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 20/27] video: omapdss: Remove unused members from struct omap_dss_board_info
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 18/27] drm/omap: Remove reference to pdata->default_device
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 22/27] ARM: OMAP2: Use the platform_data header for omapdss
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 23/27] omapdss: hdmi audio: Make header file independent of video/omapdss.h
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 24/27] drm/omap: Do not include video/omapdss.h directly in drivers
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 25/27] omapfb: Create new header file for omapfb DSS implementation
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 26/27] [media] omap_vout: Switch to use the video/omapfb_dss.h header file
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 27/27] drm/omap: Remove the video/omapdss.h and move it's content to local header file
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 19/27] omapfb: Remove reference to pdata->default_device
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [PATCH v2] phy: ti-pipe3: Program the DPLL even if it was already locked
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v8 13/14] usb: gadget: udc: adapt to OTG core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH v2] thermal: ti-soc-thermal: Add set_emul_temp hook
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: 4.6-rc7 no wifi on pandaboard A2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>