As per the TRM: http://www.ti.com/lit/ug/spruh73m/spruh73m.pdf offset 0x4 is reserved for PRM_PER. Hence removing the wrongly defined address offset. Signed-off-by: Keerthy <j-keerthy@xxxxxx> --- arch/arm/mach-omap2/prm33xx.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h index 2bc4ec5..66302c6 100644 --- a/arch/arm/mach-omap2/prm33xx.h +++ b/arch/arm/mach-omap2/prm33xx.h @@ -52,8 +52,6 @@ /* PRM.PER_PRM register offsets */ #define AM33XX_RM_PER_RSTCTRL_OFFSET 0x0000 #define AM33XX_RM_PER_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000) -#define AM33XX_RM_PER_RSTST_OFFSET 0x0004 -#define AM33XX_RM_PER_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004) #define AM33XX_PM_PER_PWRSTST_OFFSET 0x0008 #define AM33XX_PM_PER_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008) #define AM33XX_PM_PER_PWRSTCTRL_OFFSET 0x000c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
