Re: camera application for testing (was Re: v4l subdevs without big device)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sakari,

On Sunday 01 May 2016 17:08:31 Sakari Ailus wrote:
> On Sat, Apr 30, 2016 at 12:13:59AM +0200, Pavel Machek wrote:
> > Hi!
> > 
> > What is reasonable camera application for testing?
> > 
> > N900 looks like a low-end digital camera. I have now have the hardware
> > working (can set focus to X cm using command line), but that's not
> > going to be useful for taking photos.
> 
> I guess you already knew about omap3camd; it's proprietary but from purely
> practical point of view it'd be an option to support taking photos on the
> N900. That would not be extensible any way, the best possible functionality
> is limited what the daemon implements.
> 
> I'm just mentioning the option of implementing wrapper for the omap3camd so
> that it can work with upsteam APIs, I don't propose that however.
> 
> > In particular, who is going to do computation neccessary for
> > autofocus, whitebalance and exposure/gain?
> 
> I think libv4l itself has algorithms to control at least some of these. It
> relies on the image data so the CPU time consumption will be high.
> 
> AFAIR Laurent has also worked on implementing some algorithms that use the
> histogram and some of the statistics. Add him to cc list.

http://git.ideasonboard.org/omap3-isp-live.git

That's outdated and might not run or compile anymore. The code is more of a 
proof of concept implementation, but it could be used as a starting point. 
With an infinite amount of free time I'd love to work on an open-source 
project for computational cameras, integrating it with libv4l.

> > There's http://fcam.garage.maemo.org/gettingStarted.html that should
> > work on maemo, but a) it is not in Debian, b) it has non-trivial
> > dependencies and c) will be a lot of fun to get working...
> > (and d), will not be too useful, anyway, due to 1sec shutter lag:
>
> I believe this will be shorter nowadays. I don't remember the exact
> technical solution which the text below refers to but I'm pretty sure it'll
> be better with the current upstream. API-wise, there's work to be done there
> (to port FCAM to upsteram APIs) but it's a possibility.
> 
> > Fast resolution switching (less shutter lag)
> > FCam is built on top of V4L2, which doesn't handle rapidly varying
> > resolutions. When a Shot with a different resolution to the previous
> > one comes down the pipeline, FCam currently flushes the entire V4L2
> > pipeline, shuts down and restarts the whole camera subsystem, then
> > starts streaming at the new resolution. This takes a long time (nearly
> > a second), and is the cause of the horrible shutter lag on the N900. A
> > brave kernel hacker may be able to reduce this time by fiddling with
> > the FCam ISP kernel modules and the guts of the FCam library source
> > (primarily Daemon.cpp).
> > Anyone who solves this one will have our undying gratitude. An ideal
> > solution would be able to insert a 5MP capture into a stream of
> > 640x480 frames running at 30fps, without skipping more than the frame
> > time of the 5MP capture. That is, the viewfinder would effectively
> > stay live while taking a photograph.
> > 
> > )
> > 
> > Any other application I should look at? Thanks,

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux