This patch fixes the following DTC warnings for omap4-panda.dtb,
omap4-panda-a4.dtb and omap4-panda-es.dtb:
"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"
"encoder@1 has a unit name, but no reg property"
"connector@1 has a unit name, but no reg property"
Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/omap4-panda-common.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index e1d606f64cb7..f8f13952cfeb 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -103,7 +103,7 @@
enable-active-high;
};
- tfp410: encoder@0 {
+ tfp410: encoder0 {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
@@ -114,7 +114,7 @@
port@0 {
reg = <0>;
- tfp410_in: endpoint@0 {
+ tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
@@ -122,14 +122,14 @@
port@1 {
reg = <1>;
- tfp410_out: endpoint@0 {
+ tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
- dvi0: connector@0 {
+ dvi0: connector0 {
compatible = "dvi-connector";
label = "dvi";
@@ -144,7 +144,7 @@
};
};
- tpd12s015: encoder@1 {
+ tpd12s015: encoder1 {
compatible = "ti,tpd12s015";
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
@@ -158,7 +158,7 @@
port@0 {
reg = <0>;
- tpd12s015_in: endpoint@0 {
+ tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
@@ -166,14 +166,14 @@
port@1 {
reg = <1>;
- tpd12s015_out: endpoint@0 {
+ tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
- hdmi0: connector@1 {
+ hdmi0: connector1 {
compatible = "hdmi-connector";
label = "hdmi";
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
