Linux LEDS Development

• Thread Index

• Re: [RFC PATCH v6 10/11] net: dsa: qca8k: add LEDs support
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• Re: [RFC PATCH v6 09/11] leds: trigger: netdev: add additional hardware only triggers
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• Re: [RFC PATCH v6 07/11] leds: trigger: netdev: use mutex instead of spinlocks
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• Re: [RFC PATCH v6 06/11] leds: trigger: netdev: add hardware control support
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• Re: [RFC PATCH v6 03/11] leds: trigger: netdev: drop NETDEV_LED_MODE_LINKUP from mode
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• Re: [RFC PATCH v6 02/11] leds: add function to configure hardware controlled LED
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• Re: [RFC PATCH v6 01/11] leds: add support for hardware driven LEDs
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: net: add bitfield defines for Ethernet speeds
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v3 2/2] leds: multicolor: Read default-intensities property
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: leds: Add multi-color default-intensities property
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: leds: qcom-lpg: Add compatible for PM660L LPG block
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: leds: qcom-lpg: Add compatible for PM660L LPG block
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] leds: qcom-lpg: add missing PWM dependency
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds: Add regulator-led binding
  • From: Antonio Ospite <ao2@xxxxxx>
• [PATCH] leds: lp50xx: Remove duplicated error reporting in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 18/48] ARM: pxa: hx4700: use gpio descriptors for audio
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: net: add bitfield defines for Ethernet speeds
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [RFC PATCH v6 10/11] net: dsa: qca8k: add LEDs support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC PATCH v6 10/11] net: dsa: qca8k: add LEDs support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC PATCH v6 09/11] leds: trigger: netdev: add additional hardware only triggers
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC PATCH v6 07/11] leds: trigger: netdev: use mutex instead of spinlocks
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC PATCH v6 06/11] leds: trigger: netdev: add hardware control support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC PATCH v6 04/11] leds: trigger: netdev: rename and expose NETDEV trigger enum modes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC PATCH v6 03/11] leds: trigger: netdev: drop NETDEV_LED_MODE_LINKUP from mode
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC PATCH v6 02/11] leds: add function to configure hardware controlled LED
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC PATCH v6 01/11] leds: add support for hardware driven LEDs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 18/48] ARM: pxa: hx4700: use gpio descriptors for audio
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 07/30] mips: ip22: Reword PANICED to PANICKED and remove useless header
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: net: add bitfield defines for Ethernet speeds
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sdm630-nile: Add RGB status LED on the PM660L LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: pm660l: Add LPG node
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 2/4] leds: qcom-lpg: Add PM660L configuration and compatible
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: leds: qcom-lpg: Add compatible for PM660L LPG block
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 07/30] mips: ip22: Reword PANICED to PANICKED and remove useless header
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/2] Make AUX gpio pin optional for ktd2692
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 0/2] Make AUX gpio pin optional for ktd2692
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v7 0/2] Make AUX gpio pin optional for ktd2692
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• Re: [PATCH v7 0/2] Make AUX gpio pin optional for ktd2692
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v7 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v7 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v7 0/2] Make AUX gpio pin optional for ktd2692
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v1] leds: Move pwm-multicolor driver into rgb directory
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/3 RESEND] Multicolor PWM LED support
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• [PATCH] leds: is31fl32xx: Improve error reporting in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds-mt6360: Drop redundant 'unevaluateProperties'
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v8 0/3 RESEND] Multicolor PWM LED support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds: Add regulator-led binding
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3] leds: pca9532: Make pca9532_destroy_devices() return void
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH V4 0/4] Add PM8350C PMIC PWM support for backlight
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 4/4] leds: pca955x: Add HW blink support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH RESEND] arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 3/4] leds: pca955x: Optimize probe led selection
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v6 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: trigger/tty: Add knob to blink only for tx or only for rx
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: (subset) [PATCH V4 0/4] Add PM8350C PMIC PWM support for backlight
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [RFC PATCH v6 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH V4 0/4] Add PM8350C PMIC PWM support for backlight
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v14 1/2] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] leds: ledtrig-pattern: Use last_repeat when applying hw pattern
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v6 (corrected v2) 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH RESEND v6 (corrected v2) 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH RESEND v6 (corrected v2) 0/2] Make AUX gpio pin optional for ktd2692
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH RESEND v6 (corrected v2) 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH RESEND v6 (corrected) 0/2] Make AUX gpio pin optional for ktd2692
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH RESEND v6 (corrected) 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• Re: [PATCH RESEND v6 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH RESEND v6 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH RESEND v6 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH RESEND v6 0/2] Make AUX gpio pin optional for ktd2692
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• Re: [PATCH v14 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V4 0/4] Add PM8350C PMIC PWM support for backlight
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 04/30] firmware: google: Convert regular spinlock into trylock on panic path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: AW: AW: [PATCH v2 1/2] dt-bindings: leds: Add multi-color default-intensities property
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH v14 2/2] leds: Add driver for Qualcomm LPG
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v14 1/2] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Pavel Machek <pavel@xxxxxx>
• AW: AW: [PATCH v2 1/2] dt-bindings: leds: Add multi-color default-intensities property
  • From: Sven Schuchmann <schuchmann@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v6 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 04/30] firmware: google: Convert regular spinlock into trylock on panic path
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH 04/30] firmware: google: Convert regular spinlock into trylock on panic path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: AW: [PATCH v2 1/2] dt-bindings: leds: Add multi-color default-intensities property
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH 16/30] drivers/hv/vmbus, video/hyperv_fb: Untangle and refactor Hyper-V panic notifiers
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• RE: [PATCH 16/30] drivers/hv/vmbus, video/hyperv_fb: Untangle and refactor Hyper-V panic notifiers
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• Re: [PATCH 24/30] panic: Refactor the panic path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 04/30] firmware: google: Convert regular spinlock into trylock on panic path
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH 19/30] panic: Add the panic hypervisor notifier list
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• RE: [PATCH 19/30] panic: Add the panic hypervisor notifier list
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• RE: [PATCH 24/30] panic: Refactor the panic path
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: BCM5301X: Add triggers for Luxul XWR-1200 network LEDs
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH 3/4] dt-bindings: leds: add Ethernet triggered LEDs to example
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH 2/4] dt-bindings: net: allow Ethernet devices as LED triggers
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH 1/4] dt-bindings: net: add bitfield defines for Ethernet speeds
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [RFC PATCH v6 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [RFC PATCH v6 08/11] leds: trigger: netdev: add available mode sysfs attr
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [RFC PATCH v6 06/11] leds: trigger: netdev: add hardware control support
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [RFC PATCH v6 09/11] leds: trigger: netdev: add additional hardware only triggers
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [RFC PATCH v6 07/11] leds: trigger: netdev: use mutex instead of spinlocks
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [RFC PATCH v6 10/11] net: dsa: qca8k: add LEDs support
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [RFC PATCH v6 05/11] leds: trigger: netdev: convert device attr to macro
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [RFC PATCH v6 04/11] leds: trigger: netdev: rename and expose NETDEV trigger enum modes
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [RFC PATCH v6 03/11] leds: trigger: netdev: drop NETDEV_LED_MODE_LINKUP from mode
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [RFC PATCH v6 02/11] leds: add function to configure hardware controlled LED
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [RFC PATCH v6 01/11] leds: add support for hardware driven LEDs
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• [RFC PATCH v6 00/11] Adds support for PHY LEDs with offload triggers
  • From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• AW: [PATCH v2 1/2] dt-bindings: leds: Add multi-color default-intensities property
  • From: Sven Schuchmann <schuchmann@xxxxxxxxxxxxxxxxx>
• Setting multi-color intensities stops software blink
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: leds: Add multi-color default-intensities property
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] leds: multicolor: Read default-intensities property
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: leds: Add multi-color default-intensities property
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• [PATCH v1 2/2] leds: multicolor: Read default-intensities property
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds: Add regulator-led binding
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: Initial multicolor LED intensities
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 15/30] bus: brcmstb_gisb: Clean-up panic/die notifiers
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 06/30] soc: bcm: brcmstb: Document panic notifier action and remove useless header
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 06/30] soc: bcm: brcmstb: Document panic notifier action and remove useless header
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 15/30] bus: brcmstb_gisb: Clean-up panic/die notifiers
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Initial multicolor LED intensities
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/3 RESEND] Multicolor PWM LED support
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [RFC v2 16/39] leds: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH 18/48] ARM: pxa: hx4700: use gpio descriptors for audio
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH 25/48] ARM: pxa: zylonite: use gpio lookup instead mfp header
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 24/48] ARM: pxa: mainstone-wm97xx: use gpio lookup table
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 23/48] ARM: pxa: magician: use platform driver for audio
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 22/48] ARM: pxa: z2: use gpio lookup for audio device
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 21/48] ARM: pxa: eseries: use gpio lookup for audio
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 20/48] ARM: pxa: spitz: use gpio descriptors for audio
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 18/48] ARM: pxa: hx4700: use gpio descriptors for audio
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 17/48] ARM: pxa: corgi: use gpio descriptors for audio
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 15/48] ARM: pxa: tosa: use gpio descriptor for audio
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v14 2/2] leds: Add driver for Qualcomm LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v14 2/2] leds: Add driver for Qualcomm LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v14 1/2] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v14 1/2] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v14 2/2] leds: Add driver for Qualcomm LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 16/30] drivers/hv/vmbus, video/hyperv_fb: Untangle and refactor Hyper-V panic notifiers
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 02/30] ARM: kexec: Disable IRQs/FIQs also on crash CPUs shutdown path
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH 02/30] ARM: kexec: Disable IRQs/FIQs also on crash CPUs shutdown path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 02/30] ARM: kexec: Disable IRQs/FIQs also on crash CPUs shutdown path
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/30] ARM: kexec: Disable IRQs/FIQs also on crash CPUs shutdown path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 24/30] panic: Refactor the panic path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 18/30] notifier: Show function names on notifier routines if DEBUG_NOTIFIERS is set
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 21/30] panic: Introduce the panic pre-reboot notifier list
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 13/30] s390/consoles: Improve panic notifiers reliability
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [RFC v2 16/39] leds: add HAS_IOPORT dependencies
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 13/30] s390/consoles: Improve panic notifiers reliability
  • From: Heiko Carstens <hca@xxxxxxxxxxxxx>
• Re: [PATCH 02/30] ARM: kexec: Disable IRQs/FIQs also on crash CPUs shutdown path
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• RE: [PATCH 24/30] panic: Refactor the panic path
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• Re: [PATCH 19/30] panic: Add the panic hypervisor notifier list
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH 19/30] panic: Add the panic hypervisor notifier list
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• RE: [PATCH 16/30] drivers/hv/vmbus, video/hyperv_fb: Untangle and refactor Hyper-V panic notifiers
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• RE: [PATCH 18/30] notifier: Show function names on notifier routines if DEBUG_NOTIFIERS is set
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• RE: [PATCH 02/30] ARM: kexec: Disable IRQs/FIQs also on crash CPUs shutdown path
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• Re: [PATCH 24/30] panic: Refactor the panic path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 21/30] panic: Introduce the panic pre-reboot notifier list
  • From: Max Filippov <jcmvbkbc@xxxxxxxxx>
• Re: [PATCH 21/30] panic: Introduce the panic pre-reboot notifier list
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 20/30] panic: Add the panic informational notifier list
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 17/30] tracing: Improve panic/die notifiers
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 12/30] parisc: Replace regular spinlock with spin_trylock on panic path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 09/30] coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 17/30] tracing: Improve panic/die notifiers
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [RFC v2 16/39] leds: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH 17/30] tracing: Improve panic/die notifiers
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH 17/30] tracing: Improve panic/die notifiers
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH 17/30] tracing: Improve panic/die notifiers
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH v14 2/2] leds: Add driver for Qualcomm LPG
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 12/30] parisc: Replace regular spinlock with spin_trylock on panic path
  • From: Helge Deller <deller@xxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v14 2/2] leds: Add driver for Qualcomm LPG
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 21/30] panic: Introduce the panic pre-reboot notifier list
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH v3] leds: pca9532: Make pca9532_destroy_devices() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] leds: flash: mt6360: Add mt6360 isnk channel hardwre breath mode support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH 21/30] panic: Introduce the panic pre-reboot notifier list
  • From: Alex Elder <elder@xxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/4] leds: flash: mt6360: Add mt6360 isnk channel hardwre breath mode support
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] leds: netxbig: add missing of_node_put() in netxbig_leds_get_of_pdata()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH 4/4] leds: flash: mt6360: Add mt6360 isnk channel hardwre breath mode support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH 2/4] leds: flash: mt6360: Remove unused dependency in Kconfig
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH 1/4] leds: flash: mt6360: Fix the wrong enable_reg in multicolor brightness set
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH 0/4] leds: flash: mt6360: Apply the fixes and hardware features
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH 3/4] leds: flash: mt6360: Add mt6360 isnk channel hardware timer dimming mode support
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH 20/30] panic: Add the panic informational notifier list
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 09/30] coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 18/30] notifier: Show function names on notifier routines if DEBUG_NOTIFIERS is set
  • From: Xiaoming Ni <nixiaoming@xxxxxxxxxx>
• Re: [PATCH 24/30] panic: Refactor the panic path
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 20/30] panic: Add the panic informational notifier list
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxx>
• [PATCH 30/30] um: Avoid duplicate call to kmsg_dump()
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 27/30] powerpc: Do not force all panic notifiers to execute before kdump
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 25/30] panic, printk: Add console flush parameter and convert panic_print to a notifier
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 28/30] panic: Unexport crash_kexec_post_notifiers
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 26/30] Drivers: hv: Do not force all panic notifiers to execute before kdump
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 29/30] powerpc: ps3, pseries: Avoid duplicate call to kmsg_dump() on panic
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 23/30] printk: kmsg_dump: Introduce helper to inform number of dumpers
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 24/30] panic: Refactor the panic path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 22/30] panic: Introduce the panic post-reboot notifier list
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 21/30] panic: Introduce the panic pre-reboot notifier list
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 20/30] panic: Add the panic informational notifier list
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 13/30] s390/consoles: Improve panic notifiers reliability
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 18/30] notifier: Show function names on notifier routines if DEBUG_NOTIFIERS is set
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 16/30] drivers/hv/vmbus, video/hyperv_fb: Untangle and refactor Hyper-V panic notifiers
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 12/30] parisc: Replace regular spinlock with spin_trylock on panic path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 19/30] panic: Add the panic hypervisor notifier list
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 17/30] tracing: Improve panic/die notifiers
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 14/30] panic: Properly identify the panic event to the notifiers' callbacks
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 11/30] um: Improve panic notifiers consistency and ordering
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 15/30] bus: brcmstb_gisb: Clean-up panic/die notifiers
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 09/30] coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 10/30] alpha: Clean-up the panic notifier code
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 02/30] ARM: kexec: Disable IRQs/FIQs also on crash CPUs shutdown path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 08/30] powerpc/setup: Refactor/untangle panic notifiers
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 07/30] mips: ip22: Reword PANICED to PANICKED and remove useless header
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 01/30] x86/crash,reboot: Avoid re-disabling VMX in all CPUs on crash/restart
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 05/30] misc/pvpanic: Convert regular spinlock into trylock on panic path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 06/30] soc: bcm: brcmstb: Document panic notifier action and remove useless header
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 04/30] firmware: google: Convert regular spinlock into trylock on panic path
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 00/30] The panic notifiers refactor
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• [PATCH 03/30] notifier: Add panic notifiers info and purge trailing whitespaces
  • From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
• Re: [PATCH V3 1/2] dt-bindings: leds: add Broadcom's BCM63138 controller
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH v5 1/4] leds: pca955x: Refactor with helper functions and renaming
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v5 3/4] leds: pca955x: Optimize probe led selection
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v5 4/4] leds: pca955x: Add HW blink support
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v5 2/4] leds: pca955x: Use pointers to driver data rather than I2C client
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v5 0/4] leds: pca955x: Add HW blink support
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: Fix binding document for the Mediatek MT6360 LED
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds-mt6360: Drop redundant 'unevaluateProperties'
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: Fix binding document for the Mediatek MT6360 LED
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH 0/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
  • From: Gene Chen <gene.chen.richtek@xxxxxxxxx>
• [PATCH] dt-bindings: leds-mt6360: Drop redundant 'unevaluateProperties'
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH RESEND] arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH] leds: trigger/tty: Add knob to blink only for tx or only for rx
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 40/48] ARM: pxa: tosa: use gpio lookup for battery
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH 40/48] ARM: pxa: tosa: use gpio lookup for battery
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 13/48] ARM: pxa: use pdev resource for palmld mmio
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/48] watchdog: sa1100: use platform device registration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 33/48] ASoC: pxa: i2s: use normal MMIO accessors
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 41/48] ARM: pxa: remove unused mach/bitfield.h
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 44/48] ARM: pxa: move plat-pxa to drivers/soc/
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 26/48] input: touchscreen: mainstone: fix pxa2xx+pxa3xx configuration
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 43/48] ARM: mmp: rename pxa_register_device
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 47/48] ARM: pxa: remove support for MTD_XIP
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 48/48] ARM: pxa: convert to multiplatform
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 46/48] ARM: pxa: move mach/*.h to mach-pxa/
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 40/48] ARM: pxa: tosa: use gpio lookup for battery
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 42/48] ARM: mmp: remove tavorevb board support
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 34/48] ARM: pxa: pcmcia: move smemc configuration back to arch
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 23/48] ARM: pxa: magician: use platform driver for audio
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 38/48] ARM: pxa: move clk register definitions to driver
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 36/48] cpufreq: pxa3: move clk register access to clk driver
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 45/48] ARM: PXA: fix multi-cpu build of xsc3
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 37/48] ARM: pxa: move smemc register access from clk to platform
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 31/48] ASoC: pxa: use pdev resource for FIFO regs
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 32/48] ASoC: pxa: ac97: use normal MMIO accessors
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 35/48] ARM: pxa: remove get_clk_frequency_khz()
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 28/48] Input: touchscreen: use wrapper for pxa2xx ac97 registers
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 39/48] power: tosa: simplify probe function
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 30/48] Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 24/48] ARM: pxa: mainstone-wm97xx: use gpio lookup table
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 22/48] ARM: pxa: z2: use gpio lookup for audio device
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 17/48] ARM: pxa: corgi: use gpio descriptors for audio
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 16/48] ARM: pxa: poodle: use platform data for poodle asoc driver
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 15/48] ARM: pxa: tosa: use gpio descriptor for audio
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 14/48] ARM: pxa: maybe fix gpio lookup tables
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 11/48] ARM: pxa: move pcmcia board data into mach-pxa
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 07/48] ARM: pxa: move mach/sound.h to linux/platform_data/
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 12/48] ARM: pxa: make addr-map.h header local
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 21/48] ARM: pxa: eseries: use gpio lookup for audio
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 09/48] watchdog: sa1100: use platform device registration
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 29/48] Input: wm97xx - switch to using threaded IRQ
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 27/48] input: touchscreen: mainstone: sync with zylonite driver
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 25/48] ARM: pxa: zylonite: use gpio lookup instead mfp header
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 20/48] ARM: pxa: spitz: use gpio descriptors for audio
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 19/48] ARM: pxa: lubbock: pass udc irqs as resource
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 06/48] ARM: pxa: stop using mach/bitfield.h
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 05/48] ARM: pxa: split up mach/hardware.h
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 13/48] ARM: pxa: use pdev resource for palmld mmio
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 08/48] ARM: pxa: move regs-lcd.h into driver
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 18/48] ARM: pxa: hx4700: use gpio descriptors for audio
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 10/48] ARM: pxa: pxa2xx-ac97-lib: use IRQ resource
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 03/48] ARM: pxa: make mach/regs-uart.h private
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 04/48] ARM: pxa: remove mach/dma.h
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 02/48] ARM: pxa: make mainstone.h private
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 01/48] ARM: pxa: split mach/generic.h
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH v2 00/48] ARM: PXA multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: Multi-color LED framework
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Multi-color LED framework
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• Multi-color LED framework
  • From: Velumani T <velumani.t@xxxxxxxxx>
• [PATCH v4 1/4] leds: pca955x: Refactor with helper functions and renaming
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v4 0/4] leds: pca955x: Add HW blink support
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v4 4/4] leds: pca955x: Add HW blink support
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v4 3/4] leds: pca955x: Optimize probe led selection
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v4 2/4] leds: pca955x: Use pointers to driver data rather than I2C client
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] leds: pca955x: Add HW blink support
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v4] leds: remove ide-disk trigger
  • From: Corentin Labbe <clabbe@xxxxxxxxxxxx>
• Re: [PATCH v14 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/4] leds: pca955x: Add HW blink support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] leds: pca955x: Add HW blink support
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v3 4/4] leds: pca955x: Add HW blink support
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v3 1/4] leds: pca955x: Refactor with helper functions and renaming
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v3 3/4] leds: pca955x: Optimize probe led selection
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v3 0/4] leds: pca955x: Add HW blink support
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v3 2/4] leds: pca955x: Use pointers to driver data rather than I2C client
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] leds: pca955x: Clean up and optimize
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v6 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v6 0/2] Make AUX gpio pin optional for ktd2692
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• Re: [PATCH v5 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Marion & Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v5 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v5 0/2] Make AUX gpio pin optional for ktd2692
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• Re: [PATCH v4 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Marion & Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v4 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v4 0/2] Make AUX gpio pin optional for ktd2692
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• Re: [PATCH v2 2/2] leds: pca955x: Add HW blink support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/2] leds: pca955x: Clean up and optimize
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 1/2] leds: pca955x: Clean up and optimize
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v2 0/2] leds: pca955x: Add HW blink support
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v2 2/2] leds: pca955x: Add HW blink support
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v3 0/2] Make AUX gpio pin optional for ktd2692
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v2 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v2 0/2] Make AUX gpio pin optional for ktd2692
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 2/2] leds: ktd2692: Make aux-gpios optional
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 0/2] Make AUX gpio pin optional for ktd2692
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v8 2/3 RESEND] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v8 0/3 RESEND] Multicolor PWM LED support
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v8 3/3 RESEND] leds: Add PWM multicolor driver
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v8 1/3 RESEND] dt-bindings: leds: Optional multi-led unit address
  • From: sven@xxxxxxxxxxxxxxxx
• Re: [PATCH v14 2/2] leds: Add driver for Qualcomm LPG
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/3] leds: regulator: Add dev helper variable
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/3] leds: regulator: Make probeable from device tree
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: leds: Add regulator-led binding
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] dt-bindings: leds: sgm3140: Document ocp8110 compatible
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH] leds: pca955x: Add HW blink support
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH] leds: pca955x: Add HW blink support
  • From: Patrick Williams <patrick@xxxxxxxxx>
• Re: [PATCH v3] leds: pca9532: Make pca9532_destroy_devices() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] leds: pca955x: Add HW blink support
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH] leds: pca955x: Remove unused pca95xx_num_led_regs()
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH] leds: pca955x: Remove unused pca95xx_num_led_regs()
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• Re: [GIT PULL] LEDs changes for v5.18-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH V3 1/2] dt-bindings: leds: add Broadcom's BCM63138 controller
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [GIT PULL] LEDs changes for v5.18-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: leds: sgm3140: Document ocp8110 compatible
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH 00/30] fix typos in comments
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v9 2/2] leds: trigger: Add block device LED trigger
  • From: Ian Pilcher <arequipeno@xxxxxxxxx>
• [PATCH v9 1/2] docs: Add block device (blkdev) LED trigger documentation
  • From: Ian Pilcher <arequipeno@xxxxxxxxx>
• [PATCH v9 0/2] Introduce block device LED trigger
  • From: Ian Pilcher <arequipeno@xxxxxxxxx>
• Re: [PATCH v4 1/2] leds: ktd20xx: Extension of the KTD20xx family of LED drivers from Kinetic
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH] leds: add LED driver for Worldsemi WS2812B
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: (subset) [PATCH 00/30] fix typos in comments
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 00/30] fix typos in comments
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 00/30] fix typos in comments
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH 00/30] fix typos in comments
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• [PATCH 08/30] leds: pca963x: fix typos in comments
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• [PATCH] leds: add LED driver for Worldsemi WS2812B
  • From: Ivan Vozvakhov <i.vozvakhov@xxxxxxxxxxxx>
• Re: [PATCH 1/2] simatic-ipc: convert to use common P2SB accessor
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 1/2] simatic-ipc: convert to use common P2SB accessor
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 2/2] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] regulator/mfd: dt-bindings: maxim,max77802: convert to dtschema
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: mfd: maxim,max77802: convert to dtschema
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/3] regulator: dt-bindings: maxim,max77802: convert to dtschema
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V3 1/2] dt-bindings: leds: add Broadcom's BCM63138 controller
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH v14 2/2] leds: Add driver for Qualcomm LPG
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v14 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v14 1/2] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v13 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v13 2/2] leds: Add driver for Qualcomm LPG
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 0/2] leds: pca955x: Expose GPIOs for all pins
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH v13 2/2] leds: Add driver for Qualcomm LPG
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 0/2] leds: pca955x: Expose GPIOs for all pins
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v13 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V4 2/4] leds: Add pm8350c support to Qualcomm LPG driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds: Add regulator-led binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] leds: trigger/tty: Add knob to blink only for tx or only for rx
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: trigger/tty: Add knob to blink only for tx or only for rx
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• Re: [PATCH v13 2/2] leds: Add driver for Qualcomm LPG
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] leds: trigger/tty: Add knob to blink only for tx or only for rx
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v13 2/2] leds: Add driver for Qualcomm LPG
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH v8 2/3] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v8 3/3] leds: Add PWM multicolor driver
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v8 1/3] dt-bindings: leds: Optional multi-led unit address
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v8 0/3] Multicolor PWM LED support
  • From: sven@xxxxxxxxxxxxxxxx
• Re: [PATCH v13 2/2] leds: Add driver for Qualcomm LPG
  • From: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: leds: sgm3140: Document ocp8110 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V4 2/4] leds: Add pm8350c support to Qualcomm LPG driver
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH V4 4/4] arm64: dts: qcom: Enable pm8350c pwm for sc7280-idp2
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V4 3/4] arm64: dts: qcom: pm8350c: Add pwm support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V4 2/4] leds: Add pm8350c support to Qualcomm LPG driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V4 1/4] dt-bindings: leds: Add pm8350c pmic support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH V4 0/4] Add PM8350C PMIC PWM support for backlight
  • From: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
• [PATCH V4 2/4] leds: Add pm8350c support to Qualcomm LPG driver
  • From: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
• [PATCH V4 4/4] arm64: dts: qcom: Enable pm8350c pwm for sc7280-idp2
  • From: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
• [PATCH V4 3/4] arm64: dts: qcom: pm8350c: Add pwm support
  • From: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
• [PATCH V4 1/4] dt-bindings: leds: Add pm8350c pmic support
  • From: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
• Re: [PATCH V3 2/4] leds: Add pm8350c support to Qualcomm LPG driver
  • From: "Satya Priya Kakitapalli (Temp)" <quic_c_skakit@xxxxxxxxxxx>
• Re: [PATCH 0/2] leds: pca955x: Expose GPIOs for all pins
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH 3/3] leds: regulator: Make probeable from device tree
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3] leds: regulator: Add dev helper variable
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: leds: Add regulator-led binding
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v13 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v13 1/2] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v12 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v12 2/2] leds: Add driver for Qualcomm LPG
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH V3 2/4] leds: Add pm8350c support to Qualcomm LPG driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/2] leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v7 2/3] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v12 2/2] leds: Add driver for Qualcomm LPG
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v12 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v12 1/2] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 0/3] regulator/mfd: dt-bindings: maxim,max77802: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] regulator: dt-bindings: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] regulator: dt-bindings: maxim,max77693: convert to dtschema
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 3/4] regulator: dt-bindings: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] regulator: dt-bindings: maxim,max77693: convert to dtschema
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 3/4] regulator: dt-bindings: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] regulator: dt-bindings: maxim,max77693: convert to dtschema
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, LED, Power and Regulator due for the v5.18 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] leds: add NCT6795D driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] leds: add NCT6795D driver
  • From: Alexandre Courbot <gnurou@xxxxxxxxx>
• [PATCH v3 3/3] leds: sgm3140: Add ocs,ocp8110 compatible
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: leds: sgm3140: Document ocp8110 compatible
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: vendor-prefixes: Add ocs prefix
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: leds: sgm3140: Document ocp8110 compatible
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 0/3] regulator/mfd: dt-bindings: maxim,max77802: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: leds: sgm3140: Document ocp8110 compatible
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] leds: ktd20xx: Extension of the KTD20xx family of LED drivers from Kinetic
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: lm3692x: Return 0 from remove callback
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3] leds: remove ide-disk trigger
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: leds: common: fix unit address in max77693 example
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 0/3] Add support for ocp8110 flash
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 0/3] regulator/mfd: dt-bindings: maxim,max77802: convert to dtschema
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: leds: sgm3140: Document ocp8110 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add ocs prefix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] regulator: dt-bindings: maxim,max77802: convert to dtschema
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• [PATCH v7 3/3] leds: Add PWM multicolor driver
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v7 2/3] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v7 1/3] dt-bindings: leds: Optional multi-led unit address
  • From: sven@xxxxxxxxxxxxxxxx
• Re: [PATCH v6 2/3] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/3] dt-bindings: leds: Optional multi-led unit address
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• [PATCH v6 3/3] leds: Add PWM multicolor driver
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v6 2/3] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v6 1/3] dt-bindings: leds: Optional multi-led unit address
  • From: sven@xxxxxxxxxxxxxxxx
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v3] leds: remove ide-disk trigger
  • From: Corentin Labbe <clabbe@xxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: backlight: qcom-wled: Add PM6150L compatible
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] leds: lm3692x: Return 0 from remove callback
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add ocs prefix
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v2 0/3] Add support for ocp8110 flash
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: leds: sgm3140: Document ocp8110 compatible
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v2] leds: remove ide-disk trigger
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 3/3] leds: sgm3140: Add ocs,ocp8110 compatible
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] leds: lm3692x: Return 0 from remove callback
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v5 2/2] leds: Add PWM multicolor driver
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v5 0/2] Multicolor PWM LED support
  • From: sven@xxxxxxxxxxxxxxxx
• Re: [PATCH v2 0/3] regulator/mfd: dt-bindings: maxim,max77802: convert to dtschema
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 0/4] leds/power/regulator/mfd: dt-bindings: maxim,max77693: convert to dtschema
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] leds: lm3692x: Return 0 from remove callback
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] leds: Add PWM multicolor driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/2] leds: Add PWM multicolor driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 2/2] leds: Add PWM multicolor driver
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v4 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v4 0/2] Multicolor PWM LED support
  • From: sven@xxxxxxxxxxxxxxxx
• Re: [PATCH v2 0/3] regulator/mfd: dt-bindings: maxim,max77802: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] leds/power/regulator/mfd: dt-bindings: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: Add PWM multicolor driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] leds: Add PWM multicolor driver
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: Add PWM multicolor driver
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH v11 2/2] leds: Add driver for Qualcomm LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v10 2/2] leds: Add driver for Qualcomm LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v11 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v11 2/2] leds: Add driver for Qualcomm LPG
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4 2/2] leds: sun50i-r329: New driver for the R329/D1 LED controller
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: leds: Add Allwinner R329/D1 LED controller
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v11 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v10 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v11 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v11 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v11 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v11 2/2] leds: Add driver for Qualcomm LPG
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v11 2/2] leds: Add driver for Qualcomm LPG
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] leds: Add PWM multicolor driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v11 2/2] leds: Add driver for Qualcomm LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v10 2/2] leds: Add driver for Qualcomm LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v10 2/2] leds: Add driver for Qualcomm LPG
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: (subset) [PATCH 0/4] Enable display backlight on Fairphone 4
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• [PATCH v11 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v11 1/2] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v10 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v10 2/2] leds: Add driver for Qualcomm LPG
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH 2/2] leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 2/2] leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 1/2] leds: simatic-ipc-leds: Make simatic_ipc_led_mem_res static
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v5 1/2] leds: ktd20xx: Extension of the KTD20xx family of LED drivers from Kinetic
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v5 1/2] leds: ktd20xx: Extension of the KTD20xx family of LED drivers from Kinetic
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v5 0/2] leds: add ktd20xx LED driver support
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v5 2/2] dt: bindings: KTD20xx: Introduce the ktd20xx family of RGB drivers
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [RFC PATCH 0/2] Multicolor PWM LED support
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v3 2/2] leds: Add PWM multicolor driver
  • From: sven@xxxxxxxxxxxxxxxx
• [PATCH v3 0/2] Multicolor PWM LED support
  • From: sven@xxxxxxxxxxxxxxxx
• Re: [RFC PATCH v2 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] Multicolor PWM LED support
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• Re: [RFC PATCH v2 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] Multicolor PWM LED support
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] leds: Add PWM multicolor driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [RFC PATCH 0/2] Multicolor PWM LED support
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v2] leds: remove ide-disk trigger
  • From: Corentin Labbe <clabbe@xxxxxxxxxxxx>
• [PATCH resend] dt-bindings: leds: common: add disk write/read and usb-host
  • From: Corentin Labbe <clabbe@xxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [RFC PATCH v2 2/2] leds: Add PWM multicolor driver
  • From: Marek Behún <marek.behun@xxxxxx>
• [RFC PATCH v2 2/2] leds: Add PWM multicolor driver
  • From: sven@xxxxxxxxxxxxxxxx
• [RFC PATCH v2 0/2] Multicolor PWM LED support
  • From: sven@xxxxxxxxxxxxxxxx
• [RFC PATCH v2 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: sven@xxxxxxxxxxxxxxxx
• Re: [RFC PATCH 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] spi: make remove callback a void function
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [RFC PATCH 2/2] leds: Add PWM multicolor driver
  • From: sven@xxxxxxxxxxxxxxxx
• [RFC PATCH 1/2] dt-bindings: leds: Add multicolor PWM LED bindings
  • From: sven@xxxxxxxxxxxxxxxx
• [RFC PATCH 0/2] Multicolor PWM LED support
  • From: sven@xxxxxxxxxxxxxxxx
• Re: Combining multiple PWM LEDs into RGB LED?
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH 0/5] spi: make remove callback a void function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Combining multiple PWM LEDs into RGB LED?
  • From: Alexander Dahl <post@xxxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.10 34/34] leds: leds-fsg: Drop FSG3 LED driver
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH 25/31] include: linux: leds: changing LED_* from enum led_brightness to actual value
  • From: Luiz Sampaio <sampaio.ime@xxxxxxxxx>
• [PATCH 08/31] leds: changing LED_* from enum led_brightness to actual value
  • From: Luiz Sampaio <sampaio.ime@xxxxxxxxx>
• Re: [PATCH v4 1/2] leds: ktd20xx: Extension of the KTD20xx family of LED drivers from Kinetic
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 1/2] leds: ktd20xx: Extension of the KTD20xx family of LED drivers from Kinetic
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v4 2/2] dt: bindings: KTD20xx: Introduce the ktd20xx family of RGB drivers
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v4 0/2] leds: add ktd20xx LED driver support
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Combining multiple PWM LEDs into RGB LED?
  • From: Sven Schwermer <sven@xxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Arnaud POULIQUEN <arnaud.pouliquen@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] dt: bindings: KTD20xx: Introduce the ktd20xx family of RGB drivers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] leds: ktd20xx: Extension of the KTD20xx family of LED drivers from Kinetic
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH AUTOSEL 5.10 34/34] leds: leds-fsg: Drop FSG3 LED driver
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH AUTOSEL 5.10 34/34] leds: leds-fsg: Drop FSG3 LED driver
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 44/44] leds: leds-fsg: Drop FSG3 LED driver
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 52/52] leds: leds-fsg: Drop FSG3 LED driver
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v3 1/2] leds: ktd20xx: Extension of the KTD20xx family of LED drivers from Kinetic
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v3 0/2] leds: add ktd20xx LED driver support
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v3 2/2] dt: bindings: KTD20xx: Introduce the ktd20xx family of RGB drivers
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH 1/2] leds: simatic-ipc-leds: Make simatic_ipc_led_mem_res static
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/2] leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [GIT PULL] LEDs changes for v5.17-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] LEDs changes for v5.17-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: power: supply: maxim,max77693: convert to dtschema
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] regulator/mfd: dt-bindings: maxim,max77802: convert to dtschema
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: leds: common: fix unit address in max77693 example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: mfd: maxim,max77693: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: leds: common: fix unit address in max77693 example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] regulator: dt-bindings: maxim,max77802: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/4] regulator: dt-bindings: maxim,max77693: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: leds: maxim,max77693: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] leds: pca9532: Make pca9532_destroy_devices() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3] leds: pca9532: Make pca9532_destroy_devices() return void
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v2 3/3] dt-bindings: leds: common: fix unit address in max77693 example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: mfd: maxim,max77802: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2 1/3] regulator: dt-bindings: maxim,max77802: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2 0/3] regulator/mfd: dt-bindings: maxim,max77802: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2 3/4] regulator: dt-bindings: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: mfd: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: power: supply: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: leds: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2 0/4] leds/power/regulator/mfd: dt-bindings: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: mfd: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] regulator: dt-bindings: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: leds: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: backlight: qcom-wled: Add PM6150L compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: mfd: maxim,max77693: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: power: supply: maxim,max77693: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] leds: pca9532: Make pca9532_destroy_devices() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v10 1/2] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 3/4] regulator: dt-bindings: maxim,max77693: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: leds: maxim,max77693: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 0/4] add device drivers for Siemens Industrial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: leds: maxim,max77693: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: leds: maxim,max77693: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: backlight: qcom-wled: Add PM6150L compatible
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>