[PATCH v3 0/3] Add support for the TLC5925

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series add the support for the TLC5925 LED controller.
This LED controller is driven though SPI. There is little internal logic
and it can be thought of as a deserializer + latches.
The TLC5925 itself drives up to 16 LEDs, but multiple TLC5925s can be
chained to drive more.

The first patch describes the dt bindings.
The second patch implements most of the driver and supports only
synchronous brightness setting (brightness_set_blocking).
The last patch implements the non-blocking version (brightness_set).

changes v2->v3:
 * fixed the yaml description of the bindings (now passes dt_binding_check)
 * renamed shit-register-length into ti,shift-register-length and specify its
   type

changes v1->v2:
 * renamed property shift_register_length into shift-register-length
 * add a SPI MODULE_DEVICE_TABLE structure
 * fixed the yaml description of the bindings (now passes dt_binding_check)

Jean-Jacques Hiblot (3):
  dt-bindings: leds: Add bindings for the TLC5925 controller
  leds: Add driver for the TLC5925 LED controller
  leds: tlc5925: Add support for non blocking operations

 .../devicetree/bindings/leds/ti,tlc5925.yaml  | 107 +++++++++
 drivers/leds/Kconfig                          |   6 +
 drivers/leds/Makefile                         |   1 +
 drivers/leds/leds-tlc5925.c                   | 224 ++++++++++++++++++
 4 files changed, 338 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/ti,tlc5925.yaml
 create mode 100644 drivers/leds/leds-tlc5925.c

-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux