Linux IIO Development

• Thread Index

• [PATCH v2 0/4] Add driver for wsen-itds accelerometer sensor
  • From: Saravanan Sekar <saravanan@xxxxxxxxxxx>
• Re: ucsi and DRD controller interaction
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] subsystem: Amplifier driver for TAS5805M,Texas instruments
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: ucsi and DRD controller interaction
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2] iio: adc: stm32-adc: fix runtime autosuspend delay when slow polling
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] iio: adc: ad7768-1: Fix channel endian spec
  • From: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>
• [PATCH] staging: iio: ad2s1210: Fix SPI reading
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] subsystem: Amplifier driver for TAS5805M,Texas instruments
  • From: Leslie Hsia(夏邦進_Pegatron) <Leslie_Hsia@xxxxxxxxxxxxxxxx>
• [PATCH v3 04/11] iio: light: cm32181: Add support for the CM3218
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 05/11] iio: light: cm32181: Clean up the probe function a bit
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 11/11] iio: light: cm32181: Fix integartion time typo
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 10/11] iio: light: cm32181: Add support for parsing CPM0 and CPM1 ACPI tables
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 09/11] iio: light: cm32181: Make lux_per_bit and lux_per_bit_base_it runtime settings
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 08/11] iio: light: cm32181: Use units of 1/100000th for calibscale and lux_per_bit
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 07/11] iio: light: cm32181: Change reg_init to use a bitmap of which registers to init
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 06/11] iio: light: cm32181: Handle CM3218 ACPI devices with 2 I2C resources
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 02/11] iio: light: cm32181: Add support for ACPI enumeration
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 03/11] iio: light: cm32181: Add some extra register defines
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 01/11] iio: light: cm32181: Switch to new style i2c-driver probe function
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• Re: [PATCH] subsystem: Amplifier driver for TAS5805M,Texas instruments
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/3] iio: adc: ti_am335x_adc: alloc kfifo & IRQ via devm_ functions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/3] iio: adc: ti_am335x_adc: alloc channels via devm_kcalloc()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/3] iio: adc: ti_am335x_adc: convert rest of probe to devm_ functions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• 回收: [PATCH] subsystem: Amplifier driver for TAS5805M,Texas instruments
  • From: Leslie Hsia(夏邦進_Pegatron) <Leslie_Hsia@xxxxxxxxxxxxxxxx>
• 回收: [PATCH] subsystem: Amplifier driver for TAS5805M,Texas instruments
  • From: Leslie Hsia(夏邦進_Pegatron) <Leslie_Hsia@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] staging: iio: ad5933: rework probe to use devm_ function variants
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: iio: scd30: add device binding file
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: chemical: add CO2 EZO module documentation
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 0/2] iio: chemical: add atlas-ezo-sensor initial support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 2/2] iio: chemical: add atlas-ezo-sensor initial support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v6 0/3] iio: chemical: atlas-sensor: add DO support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: iio: scd30: add device binding file
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: accel: Add driver for wsen-itds accelerometer sensor
  • From: Saravanan Sekar <saravanan@xxxxxxxxxxx>
• Re: [PATCH v2 3/8] iio: light: cm32181: Handle ACPI instantiating a cm32181 client on the SMBus ARA
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/8] iio: light: cm32181: Add some extra register defines
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 5/6] iio: imu: Add support for adis16475
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 4/8] iio: light: cm32181: Change reg_init to use a bitmap of which registers to init
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 8/8] iio: light: cm32181: Fix integartion time typo
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 5/8] iio: light: cm32181: Use units of 1/100000th for calibscale and lux_per_bit
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 7/8] iio: light: cm32181: Add support for parsing CPM0 and CPM1 ACPI tables
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 6/8] iio: light: cm32181: Make lux_per_bit and lux_per_bit_base_it runtime settings
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 3/8] iio: light: cm32181: Handle ACPI instantiating a cm32181 client on the SMBus ARA
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 2/8] iio: light: cm32181: Add support for the CM3218
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/8] iio: light: cm32181: Add some extra register defines
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 7/8] iio: light: cm32181: Add support for parsing CPM0 and CPM1 ACPI tables
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio: bmp280: fix compensation of humidity
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• Re: ucsi and DRD controller interaction
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• [PATCH] iio: bmp280: fix compensation of humidity
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH V2 3/3] iio: adc: Add support for PMIC7 ADC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH V3 4/4] iio: adc: Update error checks and debug prints
  • From: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
• [PATCH V3 3/4] iio: adc: Add support for PMIC7 ADC
  • From: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
• [PATCH V3 2/4] iio: adc: Add PMIC7 ADC bindings
  • From: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
• [PATCH V3 1/4] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format
  • From: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
• [PATCH v6 6/6] iio: core: use new common ioctl() mechanism
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 2/6] iio: core,buffer: wrap iio_buffer_put() call into iio_buffers_put()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 4/6] iio: buffer,event: duplicate chardev creation for buffers & events
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 5/6] iio: core: add simple centralized mechanism for ioctl() handlers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 1/6] iio: buffer: add back-ref from iio_buffer to iio_dev
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 3/6] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 0/6] iio: core,buffer: re-organize chardev creation
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helper
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH V2 2/3] iio: adc: Add PMIC7 ADC bindings
  • From: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/3] iio: adc: Add PMIC7 ADC bindings
  • From: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
• Re: [PATCH V2 1/3] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format
  • From: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
• Re: [PATCH V2 1/3] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format
  • From: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helper
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• RE: [RFC PATCH 4/4] iio: Track enabled channels on a per channel basis
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: ucsi and DRD controller interaction
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/6] iio: core: add simple centralized mechanism for ioctl() handlers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v6 5/5] iio: vcnl4000: Add buffer support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v6 3/5] iio: vcnl4000: Add event support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v6 2/5] iio: vcnl4000: Factorize data reading and writing.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v6 1/5] iio: vcnl4000: Fix i2c swapped word reading.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v6 4/5] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v6 0/5] iio: vcnl: Add interrupts support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• Re: [PATCH 4/6] Documentation: ABI: testing: scd30: document iio attributes
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v9 2/6] mfd: mp2629: Add support for mps battery charger
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v9 2/6] mfd: mp2629: Add support for mps battery charger
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zaikonnikov <eugene.zaikonnikov@xxxxxxxxxxxxx>
• Re: [PATCH v9 2/6] mfd: mp2629: Add support for mps battery charger
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 5/6] iio: core: add simple centralized mechanism for ioctl() handlers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v5 4/6] iio: buffer,event: duplicate chardev creation for buffers & events
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [RFC PATCH 1/4] iio: Move scan mask management to the core
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v5 3/3] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• Re: [PATCH v7 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v7 2/2] dt-bindings for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• [PATCH v7 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• Re: [PATCH v10 4/6] power: supply: Add support for mps mp2629 battery charger
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH] iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] iio: light: cm32181: Fix integartion time typo
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 7/8] iio: light: cm32181: Add support for parsing CPM0 and CPM1 ACPI tables
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/8] iio: light: cm32181: Change reg_init to use a bitmap of which registers to init
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/8] iio: light: cm32181: Handle ACPI instantiating a cm32181 client on the SMBus ARA
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: enable 833Hz sample frequency for tagged sensors
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v2] iio: st_sensors: make scale channels also shared by type
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH 4/6] Documentation: ABI: testing: scd30: document iio attributes
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH 2/8] iio: light: cm32181: Add support for the CM3218
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/8] iio: light: cm32181: Handle ACPI instantiating a cm32181 client on the SMBus ARA
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 4/8] iio: light: cm32181: Change reg_init to use a bitmap of which registers to init
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/8] iio: light: cm32181: Add some extra register defines
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 5/8] iio: light: cm32181: Use units of 1/100000th for calibscale and lux_per_bit
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 8/8] iio: light: cm32181: Fix integartion time typo
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 6/8] iio: light: cm32181: Make lux_per_bit and lux_per_bit_base_it runtime settings
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 7/8] iio: light: cm32181: Add support for parsing CPM0 and CPM1 ACPI tables
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC PATCH 4/4] iio: Track enabled channels on a per channel basis
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 4/4] iio: Track enabled channels on a per channel basis
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 3/4] iio: Allow channels to share storage elements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 1/4] iio: Move scan mask management to the core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/6] iio: core: add simple centralized mechanism for ioctl() handlers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/6] iio: core: use new common ioctl() mechanism
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/6] iio: core: add simple centralized mechanism for ioctl() handlers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/6] iio: buffer,event: duplicate chardev creation for buffers & events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 1/4] iio: Move scan mask management to the core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v11 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v11 1/2] iio: proximity: provide device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] iio: vcnl4000: Factorize data reading and writing.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/4] iio: vcnl4000: Add buffer support for VCNL4010/20.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/4] iio: vcnl4000: Add event support for VCNL4010/20.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] iio: vcnl4000: Factorize data reading and writing.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] subsystem: Amplifier driver for TAS5805M,Texas instruments
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: iio: scd30: add device binding file
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH v5 4/6] iio: buffer,event: duplicate chardev creation for buffers & events
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 1/6] iio: buffer: add back-ref from iio_buffer to iio_dev
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 5/6] iio: core: add simple centralized mechanism for ioctl() handlers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 2/6] iio: core,buffer: wrap iio_buffer_put() call into iio_buffers_put()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 6/6] iio: core: use new common ioctl() mechanism
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 0/6] iio: core,buffer: re-organize chardev creation
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 3/6] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v4 1/7] iio: Use an early return in iio_device_alloc to simplify code.
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: Use an early return in iio_device_alloc to simplify code.
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: vcnl4000: Add event support for VCNL4010/20.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/3] iio: documentation ltc2632_chip_info add num_channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] iio: adc: rockchip_saradc: Add support iio buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: adc: rockchip_saradc: better prefix for channel constant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/3] iio: adc: rockchip_saradc: move all of probe to devm-functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: iio: scd30: add device binding file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/6] Documentation: ABI: testing: scd30: document iio attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3 v4] iio: magnetometer: ak8974: Provide scaling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: magnetometer: ak8974: add Alps hscdtd008a
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: magnetometer: ak8974: Add Alps hscdtd008a
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: unlock on error in st_lsm6dsx_shub_write_raw()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: cros_ec_light: Add support for RGB sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: st_sensors: make scale channels also shared by type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adi,ltc2983: Add missing quotes on dependencies
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: enable 833Hz sample frequency for tagged sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 16/16] iio: st_sensors: Use get_unaligned_be24() and sign_extend32()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH][next] iio: adc: ad7476: remove redundant null check on an array
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 03/16] iio: adc: ti-ads124s08: Use get_unaligned_be24()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH][next] iio: adc: ad7476: remove redundant null check on an array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: buffer: extend short-hand use for 'indio_dev->buffer'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5592r: Fix a typo in the name of a function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5593r: Fix a typo in MODULE_DESCRIPTION
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 16/16] iio: st_sensors: Use get_unaligned_be24() and sign_extend32()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 15/16] iio: temperature: max31856: Use get_unaligned_beXX()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 14/16] iio: pressure: zpa2326: Use get_unaligned_le24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 13/16] iio: pressure: ms5611: Use get_unaligned_be24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 12/16] iio: pressure: hp206c: Use get_unaligned_be24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 11/16] iio: magnetometer: rm3100: Use get_unaligned_be24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 10/16] iio: light: zopt2201: Use get_unaligned_le24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 09/16] iio: light: si1133: Use get_unaligned_be24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 08/16] iio: health: afe4403: Use get_unaligned_be24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 07/16] iio: gyro: adis16130: Use get_unaligned_be24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 06/16] iio: dac: ad5446: Use put_unaligned_be24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 05/16] iio: dac: ad5624r_spi: Use put_unaligned_be24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 04/16] iio: dac: ltc2632: Use put_unaligned_be24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 03/16] iio: adc: ti-ads124s08: Use get_unaligned_be24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 02/16] iio: adc: mpc3422: Use get_unaligned_beXX()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 02/16] iio: adc: mpc3422: Use get_unaligned_beXX()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 01/16] iio: adc: ad_sigma_delta: Use {get,put}_unaligned_be24()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: vcnl4000: Add buffer support for VCNL4010/20.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: vcnl4000: Add buffer support for VCNL4010/20.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Use an early return in iio_device_alloc to simplify code.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] irq/irq_sim: simplify the API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v3 0/3] Add Reset and Wakeup support for CCS811
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v3 1/3] dt-bindings: iio: chemical: Add binding for CCS811 VOC sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] drivers: counter: Add Cros EC Sync counter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/6] Support ADIS16475 and similar IMUs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: at91-sama5d2_adc: handle unfinished conversions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/7] iio: light: clean out of_match_ptr and tidy headers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: kxsd9-i2c: Use mod_devicetable.h and drop of_match_ptr macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: accel: dmard06: Use mod_devicetable.h and drop of_match_ptr macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: accel: mma8452: Drop of_match_ptr macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: chemical: add Atlas Scientific RTD-SM sensor docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: chemical: atlas-sensor: add RTD-SM module support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-sensor: correct DO-SM channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 2/2] iio: chemical: atlas-sensor: add RTD-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: chemical: add Atlas Scientific RTD-SM sensor docs
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v3 0/2] iio: chemical: atlas-sensor: add RTD-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: dac: ad5592r: Fix a typo in the name of a function
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] iio: dac: ad5593r: Fix a typo in MODULE_DESCRIPTION
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH 3/3] iio: accel: mma8452: Drop of_match_ptr macro
  • From: Nishant Malpani <nish.malpani25@xxxxxxxxx>
• [PATCH 2/3] iio: accel: kxsd9-i2c: Use mod_devicetable.h and drop of_match_ptr macro
  • From: Nishant Malpani <nish.malpani25@xxxxxxxxx>
• [PATCH 1/3] iio: accel: dmard06: Use mod_devicetable.h and drop of_match_ptr macro
  • From: Nishant Malpani <nish.malpani25@xxxxxxxxx>
• [PATCH 0/3] iio: accel: Abandon of_match_ptr macro
  • From: Nishant Malpani <nish.malpani25@xxxxxxxxx>
• Re: [PATCH] iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH] iio: buffer: extend short-hand use for 'indio_dev->buffer'
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH][next] iio: adc: ad7476: remove redundant null check on an array
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH][next] iio: adc: ad7476: remove redundant null check on an array
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v9 2/6] mfd: mp2629: Add support for mps battery charger
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v9 2/6] mfd: mp2629: Add support for mps battery charger
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: enable 833Hz sample frequency for tagged sensors
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v9 2/6] mfd: mp2629: Add support for mps battery charger
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v9 2/6] mfd: mp2629: Add support for mps battery charger
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [RFC PATCH 4/4] iio: Track enabled channels on a per channel basis
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [RFC PATCH 0/4] iio: scan_mask rework to track enabled channels on per-channel basis
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [PATCH] dt-bindings: iio: adi,ltc2983: Add missing quotes on dependencies
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v9 2/6] mfd: mp2629: Add support for mps battery charger
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v9 2/6] mfd: mp2629: Add support for mps battery charger
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: accel: Add support for the Bosch-Sensortec BMI088
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [RFC PATCH 2/4] iio: hw_consumer: use new scanmask functions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 4/4] iio: Track enabled channels on a per channel basis
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 1/4] iio: Move scan mask management to the core
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 3/4] iio: Allow channels to share storage elements
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 0/4] iio: scan_mask rework to track enabled channels on per-channel basis
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 3/7] iio: core,buffer: wrap iio_buffer_put() call into iio_buffers_put()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 7/7] iio: core: use new common ioctl() mechanism
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 5/7] iio: buffer,event: duplicate chardev creation for buffers & events
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 6/7] iio: core: add simple centralized mechanism for ioctl() handlers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 2/7] iio: buffer: add back-ref from iio_buffer to iio_dev
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 4/7] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 0/7] iio: core,buffer: re-organize chardev creation
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 1/7] iio: Use an early return in iio_device_alloc to simplify code.
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 3/6] iio: chemical: scd30: add serial interface driver
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• Re: [PATCH 6/6] MAINTAINERS: add myself as a SCD30 driver maintainer
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• Re: [PATCH 4/6] Documentation: ABI: testing: scd30: document iio attributes
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH] dt-bindings: iio: adi,ltc2983: Add missing quotes on dependencies
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] iio: st_sensors: make scale channels also shared by type
  • From: Gaëtan André <rvlander@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: at91-sama5d2_adc: adjust iio_triggered_buffer_{predisable,postenable} positions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PULL] First set of IIO new device support, cleanups etc for the 5.8 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: cros_ec_light: Add support for RGB sensor
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: inquiry: where to place iio/ bandpass filter driver
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-sensor: correct DO-SM channels
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-sensor: correct DO-SM channels
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 2/2] iio: cros_ec_light: Add support for RGB sensor
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 0/2] iio: cros_ec: Add support for RGB light sensor
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 1/2] iio: cros_ec: Allow enabling/disabling calibration mode
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PULL] First set of IIO new device support, cleanups etc for the 5.8 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/6] iio: chemical: scd30: add serial interface driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 6/6] MAINTAINERS: add myself as a SCD30 driver maintainer
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND PATCH v3 1/3] dt-bindings: iio: chemical: Add binding for CCS811 VOC sensor
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-sensor: correct DO-SM channels
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: inquiry: where to place iio/ bandpass filter driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 4/6] Documentation: ABI: testing: scd30: document iio attributes
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v11 1/2] iio: proximity: provide device tree binding document
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v11 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v11 0/2] iio: proximity: driver for vcnl3020
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• Re: ucsi and DRD controller interaction
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• Re: ucsi and DRD controller interaction
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 6/6] MAINTAINERS: add myself as a SCD30 driver maintainer
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH 4/6] Documentation: ABI: testing: scd30: document iio attributes
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH 0/6] Add support for SCD30 sensor
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH 5/6] dt-bindings: iio: scd30: add device binding file
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH 1/6] iio: chemical: scd30: add core driver
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH 2/6] iio: chemical: scd30: add I2C interface driver
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH 3/6] iio: chemical: scd30: add serial interface driver
  • From: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
• [PATCH v5 4/4] iio: vcnl4000: Add buffer support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v5 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v5 2/4] iio: vcnl4000: Add event support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v5 1/4] iio: vcnl4000: Factorize data reading and writing.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v5 0/4] iio: vcnl: Add interrupts support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• Re: ucsi and DRD controller interaction
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• Re: [PATCH v10 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• Re: ucsi and DRD controller interaction
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: unlock on error in st_lsm6dsx_shub_write_raw()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: vcnl4000: Add event support for VCNL4010/20.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 4/4] iio: vcnl4000: Add buffer support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• Re: [PATCH v4 2/4] iio: vcnl4000: Add event support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• Re: [PATCH v4 2/4] SFH: PCI driver to add support of AMD sensor fusion Hub using HID framework
  • From: Richard Neumann <mail@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v10 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v10 1/2] iio: proximity: provide device tree binding document
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v10 0/2] iio: proximity: driver for vcnl3020
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• Re: [PATCH v4 2/4] SFH: PCI driver to add support of AMD sensor fusion Hub using HID framework
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• Re: ucsi and DRD controller interaction
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• Re: [PATCH v4 4/4] iio: vcnl4000: Add buffer support for VCNL4010/20.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ti-ads8344: properly byte swap value
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/4] iio: vcnl4000: Add event support for VCNL4010/20.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC] IIO way of representing device operation range ?
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC] IIO way of representing device operation range ?
  • From: "Berghe, Darius" <Darius.Berghe@xxxxxxxxxx>
• Re: [PATCH v1 13/16] iio: pressure: ms5611: Use get_unaligned_be24()
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v4 4/4] iio: vcnl4000: Add buffer support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v4 2/4] iio: vcnl4000: Add event support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v4 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v4 1/4] iio: vcnl4000: Factorize data reading and writing.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v4 0/4] iio: vcnl: Add interrupts support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• Re: [PATCH v3 1/2] irq: make irq_domain_reset_irq_data() available even for non-V2 users
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: ucsi and DRD controller interaction
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/3] iio: adc: ti-ads8344: properly byte swap value
  • From: "Xia, Hui" <hui.xia@xxxxxxxxx>
• Re: [PATCH 7/7] iio: light: vl6180: swap of.h for mod_devicetable.h and drop of_match_ptr
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• RE: [PATCH v1 05/16] iio: dac: ad5624r_spi: Use put_unaligned_be24()
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [PATCH v1 01/16] iio: adc: ad_sigma_delta: Use {get,put}_unaligned_be24()
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [PATCH v1 07/16] iio: gyro: adis16130: Use get_unaligned_be24()
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 0/7] iio: light: clean out of_match_ptr and tidy headers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/4] iio: vcnl4000: Add event support for VCNL4010/20.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: inquiry: where to place iio/ bandpass filter driver
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: vcnl4000: Factorize data reading and writing.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 16/16] iio: st_sensors: Use get_unaligned_be24() and sign_extend32()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 06/16] iio: dac: ad5446: Use put_unaligned_be24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 14/16] iio: pressure: zpa2326: Use get_unaligned_le24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 13/16] iio: pressure: ms5611: Use get_unaligned_be24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 15/16] iio: temperature: max31856: Use get_unaligned_beXX()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 12/16] iio: pressure: hp206c: Use get_unaligned_be24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 07/16] iio: gyro: adis16130: Use get_unaligned_be24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 11/16] iio: magnetometer: rm3100: Use get_unaligned_be24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 10/16] iio: light: zopt2201: Use get_unaligned_le24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 09/16] iio: light: si1133: Use get_unaligned_be24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 01/16] iio: adc: ad_sigma_delta: Use {get,put}_unaligned_be24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 05/16] iio: dac: ad5624r_spi: Use put_unaligned_be24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 04/16] iio: dac: ltc2632: Use put_unaligned_be24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 08/16] iio: health: afe4403: Use get_unaligned_be24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 03/16] iio: adc: ti-ads124s08: Use get_unaligned_be24()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 02/16] iio: adc: mpc3422: Use get_unaligned_beXX()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: counter: microchip-tcb-capture counter
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V2 2/3] iio: adc: Add PMIC7 ADC bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: add document bindings for wsen-itds accel sensor
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: Add an entry for Würth Elektronik, we
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RESEND PATCH v3 1/3] dt-bindings: iio: chemical: Add binding for CCS811 VOC sensor
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/3 v4] iio: magnetometer: ak8974: Provide scaling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3 v4] iio: magnetometer: ak8974: Break out measurement
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3 v4] iio: magnetometer: ak8974: Correct realbits
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 6/6] dt-bindings: iio: Add adis16475 documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] drivers: counter: Add Cros EC Sync counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2] drivers: counter: Add Cros EC Sync counter
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v9 1/2] iio: proximity: provide device tree binding document
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/7] iio: light: clean out of_match_ptr and tidy headers
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 7/7] iio: light: vl6180: swap of.h for mod_devicetable.h and drop of_match_ptr
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• ucsi and DRD controller interaction
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• Re: [PULL] First set of IIO fixes for 5.7
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: vcnl4000: Add event support for VCNL4010/20.
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: vcnl4000: Factorize data reading and writing.
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v3 4/4] iio: vcnl4000: Add buffer support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v3 2/4] iio: vcnl4000: Add event support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v3 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v3 1/4] iio: vcnl4000: Factorize data reading and writing.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v3 0/4] iio: vcnl: Add interrupts support for VCNL4010/20.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• Re: [PATCH v10 1/6] dt-bindings: mfd: add document bindings for mp2629
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 0/7] iio: light: clean out of_match_ptr and tidy headers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 7/7] iio: light: vl6180: swap of.h for mod_devicetable.h and drop of_match_ptr
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: Use an early return in iio_device_alloc to simplify code.
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: light: st_uvis25: Add mod_devicetable.h and drop of_match_ptr
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 5/7] iio: light: opt3001: Add mod_devicetable.h and drop use of of_match_ptr
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 4/7] iio: light: gp2ap020a00f: Swap of.h for mod_devicetable.h + drop of_match_ptr
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 3/7] iio: light: cm3232: Add mod_devicetable.h include and drop of_match_ptr
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: light: cm32181: Add mod_devicetable.h and remove of_match_ptr
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/7] iio: light: bh1780: use mod_devicetable.h and drop of_match_ptr macro
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 0/7] iio: light: clean out of_match_ptr and tidy headers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v5 3/3] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH v5 2/3] iio: DAC extension for ltc2634-12/10/8
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH v5 1/3] iio: documentation ltc2632_chip_info add num_channels
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH v5] iio: patch set ltc2632
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH] iio: chemical: atlas-sensor: correct DO-SM channels
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: chemical: atlas-sensor: add RTD-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PULL] First set of IIO fixes for 5.7
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] First set of IIO fixes for 5.7
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: Use an early return in iio_device_alloc to simplify code.
  • From: jic23@xxxxxxxxxx
• [PATCH 7/7] iio: light: vl6180: swap of.h for mod_devicetable.h and drop of_match_ptr
  • From: jic23@xxxxxxxxxx
• [PATCH 6/7] iio: light: st_uvis25: Add mod_devicetable.h and drop of_match_ptr
  • From: jic23@xxxxxxxxxx
• [PATCH 5/7] iio: light: opt3001: Add mod_devicetable.h and drop use of of_match_ptr
  • From: jic23@xxxxxxxxxx
• [PATCH 4/7] iio: light: gp2ap020a00f: Swap of.h for mod_devicetable.h + drop of_match_ptr
  • From: jic23@xxxxxxxxxx
• [PATCH 3/7] iio: light: cm3232: Add mod_devicetable.h include and drop of_match_ptr
  • From: jic23@xxxxxxxxxx
• [PATCH 2/7] iio: light: cm32181: Add mod_devicetable.h and remove of_match_ptr
  • From: jic23@xxxxxxxxxx
• [PATCH 1/7] iio: light: bh1780: use mod_devicetable.h and drop of_match_ptr macro
  • From: jic23@xxxxxxxxxx
• [PATCH 0/7] iio: light: clean out of_match_ptr and tidy headers
  • From: jic23@xxxxxxxxxx
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helper
  • From: ludovic.desroches@xxxxxxxxxxxxx
• Re: [PATCH v2 2/2] iio: at91-sama5d2_adc: adjust iio_triggered_buffer_{predisable,postenable} positions
  • From: ludovic.desroches@xxxxxxxxxxxxx
• [PATCH v5 3/3] iio: adc: rockchip_saradc: Add support iio buffers
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v5 2/3] iio: adc: rockchip_saradc: better prefix for channel constant
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v5 1/3] iio: adc: rockchip_saradc: move all of probe to devm-functions
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: chemical: atlas-sensor: add RTD-SM module support
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 2/2] iio: chemical: atlas-sensor: add RTD-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: chemical: add Atlas Scientific RTD-SM sensor docs
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v2 0/2] iio: chemical: atlas-sensor: add RTD-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: chemical: atlas-sensor: add RTD-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: chemical: add Atlas Scientific RTD-SM sensor docs
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 2/2] iio: chemical: atlas-sensor: add RTD-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 0/2] iio: chemical: atlas-sensor: add RTD-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ti-ads8344: properly byte swap value
  • From: Philip Li <philip.li@xxxxxxxxx>
• Re: [PATCH v3 1/3] ARM: at91: add atmel tcb capabilities
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [RESEND PATCH v3 0/3] Add Reset and Wakeup support for CCS811
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: adc: ad7192: fix null pointer de-reference crash during probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: counter: microchip-tcb-capture counter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] ARM: at91: add atmel tcb capabilities
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/5] Documentation: ABI: document IIO in_proximity_nearlevel file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/5] iio: vcnl4000: Export near level property for proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/5] dt-bindings: iio: light: vcnl4000: Add proximity-near-level
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: iio: Introduce common properties for iio sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add imx8qxp adc driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: accel: Add driver for wsen-itds accelerometer sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] iio: core: fail early in iio_device_alloc() if we can't get a device id
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH V2 1/3] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 2/3] iio: adc: Add PMIC7 ADC bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: core: remove extra semi-colon from devm_iio_device_register() macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 1/6] dt-bindings: mfd: add document bindings for mp2629
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: documentation ltc2632_chip_info add num_channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: dac: ad5770r: read channel nr from reg
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: fail early in iio_device_alloc() if we can't get a device id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH trivial 4/6] iio: Fix misspellings of "Analog Devices"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ti-ads8344: optimize consumption
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads8344: properly byte swap value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 1/6] dt-bindings: mfd: add document bindings for mp2629
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v10 1/6] dt-bindings: mfd: add document bindings for mp2629
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 2/6] mfd: mp2629: Add support for mps battery charger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v10 3/6] iio: adc: mp2629: Add support for mp2629 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3 v3] iio: magnetometer: ak8974: Correct realbits
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v9 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [RESEND PATCH v5 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [RESEND PATCH v5 4/5] dt-bindings: input: Add docs for ADC driven joystick.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [RESEND PATCH v5 2/5] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [RESEND PATCH v5 1/5] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v9 2/2] iio: proximity: Add driver support for vcnl3020 proximity sensor
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v9 1/2] iio: proximity: provide device tree binding document
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v9 0/2] iio: proximity: driver for vcnl3020
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v2] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v10 3/6] iio: adc: mp2629: Add support for mp2629 ADC driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH trivial 3/6] drm: Fix misspellings of "Analog Devices"
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v10 3/6] iio: adc: mp2629: Add support for mp2629 ADC driver
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v10 3/6] iio: adc: mp2629: Add support for mp2629 ADC driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads8344: properly byte swap value
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 3/3 v3] iio: magnetometer: ak8974: Provide scaling
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] counter: Add microchip TCB capture counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/3 v3] iio: magnetometer: ak8974: Correct realbits
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3 v3] iio: magnetometer: ak8974: Break out measurement
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: counter: microchip-tcb-capture counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v3 1/3] ARM: at91: add atmel tcb capabilities
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads8344: properly byte swap value
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads8344: properly byte swap value
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/3 v3] iio: magnetometer: ak8974: Break out measurement
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH trivial 2/6] dma: Fix misspelling of "Analog Devices"
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 3/3 v3] iio: magnetometer: ak8974: Provide scaling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3 v3] iio: magnetometer: ak8974: Break out measurement
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3 v3] iio: magnetometer: ak8974: Correct realbits
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads8344: properly byte swap value
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: DAC extension for ltc2634-12/10/8
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: DAC extension for ltc2634-12/10/8
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 1/2] irq: make irq_domain_reset_irq_data() available even for non-V2 users
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads8344: properly byte swap value
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads8344: properly byte swap value
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: DAC extension for ltc2634-12/10/8
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ti-ads8344: remove tx_buf from driver data
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH V2 3/3] iio: adc: Add support for PMIC7 ADC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/4] iio: accel: Add driver for wsen-itds accelerometer sensor
  • From: Saravanan Sekar <saravanan@xxxxxxxxxxx>
• Re: [PATCH trivial 5/6] ALSA: Fix misspellings of "Analog Devices"
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: inquiry: where to place iio/ bandpass filter driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC] IIO way of representing device operation range ?
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v10 3/6] iio: adc: mp2629: Add support for mp2629 ADC driver
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v10 4/6] power: supply: Add support for mps mp2629 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v10 5/6] power: supply: mp2629: Add impedance compensation config
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v10 2/6] mfd: mp2629: Add support for mps battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v10 6/6] MAINTAINERS: Add entry for mp2629 Battery Charger driver
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v10 1/6] dt-bindings: mfd: add document bindings for mp2629
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v10 0/6] Add battery charger driver support for MP2629
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v3 2/2] irq/irq_sim: simplify the API
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 1/2] irq: make irq_domain_reset_irq_data() available even for non-V2 users
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 0/2] irq/irq_sim: try to improve the API
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: Max lengths of device names?
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Max lengths of device names?
  • From: "Getz, Robin" <Robin.Getz@xxxxxxxxxx>
• [PATCH v2 1/2] iio: adc: ti-ads8344: properly byte swap value
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ti-ads8344: optimize consumption
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 0/2] iio: adc: ti-ads8344: driver improvements
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ti-ads8344: properly byte swap value
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v9 1/6] dt-bindings: mfd: add document bindings for mp2629
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V2 1/3] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: dac: AD5570R fix bindings errors
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH trivial 1/6] dt-bindings: Fix misspellings of "Analog Devices"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: ak8974: Provide scaling
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: ak8974: Provide scaling
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v1] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 1/2 v2] iio: magnetometer: ak8974: Break out measurement
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: ak8974: Provide scaling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: ak8974: Provide scaling
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Applied "ASoC: Fix misspellings of "Analog Devices"" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH] iio: buffer: rework buffer attr read-only stat-flags with 'is_visible' hook
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/2 v2] iio: magnetometer: ak8974: Break out measurement
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2 v2] iio: magnetometer: ak8974: Provide scaling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] iio: core: fail early in iio_device_alloc() if we can't get a device id
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH trivial 0/6] Fix misspellings of "Analog Devices"
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: dac: AD5570R fix bindings errors
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2 1/2] iio: dac: ad5770r: read channel nr from reg
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2 0/2] iio: dac: ad5770r: dt bindings fixes
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH trivial 0/6] Fix misspellings of "Analog Devices"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH trivial 6/6] ASoC: Fix misspellings of "Analog Devices"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH trivial 3/6] drm: Fix misspellings of "Analog Devices"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH trivial 4/6] iio: Fix misspellings of "Analog Devices"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH trivial 2/6] dma: Fix misspelling of "Analog Devices"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH trivial 1/6] dt-bindings: Fix misspellings of "Analog Devices"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH trivial 5/6] ALSA: Fix misspellings of "Analog Devices"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [RFC] IIO way of representing device operation range ?
  • From: "Berghe, Darius" <Darius.Berghe@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: DAC extension for ltc2634-12/10/8
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: DAC extension for ltc2634-12/10/8
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ti-ads8344: properly byte swap value
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ti-ads8344: remove tx_buf from driver data
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ti-ads8344: properly byte swap value
  • From: kbuild test robot <lkp@xxxxxxxxx>
• inquiry: where to place iio/ bandpass filter driver
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH v4 3/3] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH v4 2/3] iio: DAC extension for ltc2634-12/10/8
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH v4] iio: patch set ltc2632
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH v4 1/3] iio: documentation ltc2632_chip_info add num_channels
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/3] iio: adc: ti-ads8344: remove tx_buf from driver data
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 0/3] iio: adc: ti-ads8344: improve the driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 3/3] iio: adc: ti-ads8344: optimize consumption
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 1/3] iio: adc: ti-ads8344: properly byte swap value
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v9 5/6] power: supply: mp2629: Add impedance compenstation config
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v9 4/6] power: supply: Add support for mps mp2629 battery charger
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v9 1/6] dt-bindings: mfd: add document bindings for mp2629
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v9 0/6] Add battery charger driver support for MP2629
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v9 0/6] Add battery charger driver support for MP2629
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v9 0/6] Add battery charger driver support for MP2629
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v9 1/6] dt-bindings: mfd: add document bindings for mp2629
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v9 3/6] iio: adc: mp2629: Add support for mp2629 ADC driver
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v9 5/6] power: supply: mp2629: Add impedance compenstation config
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v9 4/6] power: supply: Add support for mps mp2629 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v9 0/6] Add battery charger driver support for MP2629
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v9 2/6] mfd: mp2629: Add support for mps battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v9 6/6] MAINTAINERS: Add entry for mp2629 Battery Charger driver
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: ak8974: Provide scaling
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v8 1/2] iio: proximity: provide device tree binding document
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RESEND PATCH 0/2] iio: dac: ad5770r: dt bindings fixes
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v7 4/5] power: supply: Add support for mps mp2629 battery charger
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: counter: microchip-tcb-capture counter
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH v3 3/3] counter: Add microchip TCB capture counter
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH v3 1/3] ARM: at91: add atmel tcb capabilities
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH v3 0/3] Microchip TCB Capture driver
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• Re: [RESEND PATCH v3 2/3] iio: chemical: Add support for external Reset and Wakeup in CCS811
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: core: remove extra semi-colon from devm_iio_device_register() macro
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2] iio: core: remove extra semi-colon from devm_iio_device_register() macro
  • From: Lars Engebretsen <lars@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: core: remove extra semi-colon from devm_iio_device_register() macro
  • From: Lars Engebretsen <lars@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] iio: accel: Add driver for wsen-itds accelerometer sensor
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH V2 3/3] iio: adc: Add support for PMIC7 ADC
  • From: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
• [PATCH V2 2/3] iio: adc: Add PMIC7 ADC bindings
  • From: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
• [PATCH V2 1/3] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format
  • From: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: add document bindings for wsen-itds accel sensor
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• RE: [PATCH] iio: adc: Add imx8qxp adc driver support
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: DAC extension for ltc2634-12/10/8
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] counter: Add atmel TCB capture counter
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• RE: [PATCH] iio: adc: Add imx8qxp adc driver support
  • From: BOUGH CHEN <haibo.chen@xxxxxxx>
• [PATCH 0/4] Add driver for wsen-itds accelerometer sensor
  • From: Saravanan Sekar <saravanan@xxxxxxxxxxx>
• [PATCH 3/4] iio: accel: Add driver for wsen-itds accelerometer sensor
  • From: Saravanan Sekar <saravanan@xxxxxxxxxxx>
• [PATCH 4/4] MAINTAINERS: Add entry for wsen-itds accelerometer sensor
  • From: Saravanan Sekar <saravanan@xxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: iio: add document bindings for wsen-itds accel sensor
  • From: Saravanan Sekar <saravanan@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: Add an entry for Würth Elektronik, we
  • From: Saravanan Sekar <saravanan@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: DAC extension for ltc2634-12/10/8
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: documentation ltc2632_chip_info add num_channels
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helper
  • From: ludovic.desroches@xxxxxxxxxxxxx
• Re: [PATCH v2 1/2] iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helper
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v4 2/2] iio: adc: ad7192: move ad7192_of_match table closer to the end of the file
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 1/2] iio: adc: ad7192: fix null pointer de-reference crash during probe
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: adc: ad7192: fix null pointer de-reference crash during probe
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: core: remove extra semi-colon from devm_iio_device_register() macro
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: magnetometer: ak8974: Add Alps hscdtd008a
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: vendor-prefixes: Add Alps
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 3/3] iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH v3 2/3] iio: DAC extension for ltc2634-12/10/8
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH v3 1/3] iio: documentation ltc2632_chip_info add num_channels
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH v3] iio: patch set ltc2632
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• [PATCH v1] iio: magnetometer: ak8974: Silence deferred-probe error
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v4 3/5] dt-bindings: iio: light: vcnl4000: Add proximity-near-level
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: iio: Introduce common properties for iio sensors
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: magnetometer: ak8974: Provide scaling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v10 2/2] iio: Add SEMTECH SX9310/9311 sensor driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v2] drivers: counter: Add Cros EC Sync counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 2/2 v8] iio: Add SEMTECH SX9310/9311 sensor driver
  • From: Daniel Campello <campello@xxxxxxxxxx>
• [PATCH v10 2/2] iio: Add SEMTECH SX9310/9311 sensor driver
  • From: Daniel Campello <campello@xxxxxxxxxxxx>
• [PATCH v10 1/2] dt-bindings: iio: Add bindings for sx9310 sensor
  • From: Daniel Campello <campello@xxxxxxxxxxxx>
• [RESEND PATCH v3 3/3] iio: chemical: Add OF match table for CCS811 VOC sensor
  • From: mani@xxxxxxxxxx
• [RESEND PATCH v3 2/3] iio: chemical: Add support for external Reset and Wakeup in CCS811
  • From: mani@xxxxxxxxxx
• [RESEND PATCH v3 1/3] dt-bindings: iio: chemical: Add binding for CCS811 VOC sensor
  • From: mani@xxxxxxxxxx
• [RESEND PATCH v3 0/3] Add Reset and Wakeup support for CCS811
  • From: mani@xxxxxxxxxx
• Re: [PATCH v3 0/3] Add Reset and Wakeup support for CCS811
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: Small error in iio/iio.h
  • From: Lars Engebretsen <lars@xxxxxxxxxxxxxx>
• [PATCH] iio: core: remove extra semi-colon from devm_iio_device_register() macro
  • From: Lars Engebretsen <lars@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] dt-bindings: serial: Add binding for software flow control in STM32 UART
  • From: mani@xxxxxxxxxx
• [PATCH v3 2/3] iio: chemical: Add OF match table for CCS811 VOC sensor
  • From: mani@xxxxxxxxxx
• [PATCH v3 1/3] iio: chemical: Add support for external Reset and Wakeup in CCS811
  • From: mani@xxxxxxxxxx
• [PATCH v3 0/3] Add Reset and Wakeup support for CCS811
  • From: mani@xxxxxxxxxx
• [PATCH] iio: core: remove extra semi-colon from devm_iio_device_register() macro
  • From: Lars Engebretsen <lars@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: chemical: Add support for external Reset and Wakeup in CCS811
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: chemical: Add support for external Reset and Wakeup in CCS811
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: iio: adc: Add MAX1241 bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: DAC extension for ltc2634-12/10/8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: patch set ltc2632
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: chemical: Add support for external Reset and Wakeup in CCS811
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>