On Wed, 27 May 2020 20:57:01 +0200
Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx> wrote:
> Add I2C driver for InvenSense ICM-426xxx devices.
>
> Configure bus signal slew rates as indicated in the datasheet.
>
> Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
Looks fine to me.
J
> ---
> .../iio/imu/inv_icm42600/inv_icm42600_i2c.c | 100 ++++++++++++++++++
> 1 file changed, 100 insertions(+)
> create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
>
> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
> new file mode 100644
> index 000000000000..4789cead23b3
> --- /dev/null
> +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
> @@ -0,0 +1,100 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2020 InvenSense, Inc.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <linux/property.h>
> +
> +#include "inv_icm42600.h"
> +
> +static int inv_icm42600_i2c_bus_setup(struct inv_icm42600_state *st)
> +{
> + unsigned int mask, val;
> + int ret;
> +
> + /* setup interface registers */
> + ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
> + INV_ICM42600_INTF_CONFIG6_MASK,
> + INV_ICM42600_INTF_CONFIG6_I3C_EN);
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG4,
> + INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY, 0);
> + if (ret)
> + return ret;
> +
> + /* set slew rates for I2C and SPI */
> + mask = INV_ICM42600_DRIVE_CONFIG_I2C_MASK |
> + INV_ICM42600_DRIVE_CONFIG_SPI_MASK;
> + val = INV_ICM42600_DRIVE_CONFIG_I2C(INV_ICM42600_SLEW_RATE_12_36NS) |
> + INV_ICM42600_DRIVE_CONFIG_SPI(INV_ICM42600_SLEW_RATE_12_36NS);
> + ret = regmap_update_bits(st->map, INV_ICM42600_REG_DRIVE_CONFIG,
> + mask, val);
> + if (ret)
> + return ret;
> +
> + /* disable SPI bus */
> + return regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG0,
> + INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK,
> + INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_SPI_DIS);
> +}
> +
> +static int inv_icm42600_probe(struct i2c_client *client)
> +{
> + const void *match;
> + enum inv_icm42600_chip chip;
> + struct regmap *regmap;
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
> + return -ENOTSUPP;
> +
> + match = device_get_match_data(&client->dev);
> + if (!match)
> + return -EINVAL;
> + chip = (enum inv_icm42600_chip)match;
> +
> + regmap = devm_regmap_init_i2c(client, &inv_icm42600_regmap_config);
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + return inv_icm42600_core_probe(regmap, chip, inv_icm42600_i2c_bus_setup);
> +}
> +
> +static const struct of_device_id inv_icm42600_of_matches[] = {
> + {
> + .compatible = "invensense,icm42600",
> + .data = (void *)INV_CHIP_ICM42600,
> + }, {
> + .compatible = "invensense,icm42602",
> + .data = (void *)INV_CHIP_ICM42602,
> + }, {
> + .compatible = "invensense,icm42605",
> + .data = (void *)INV_CHIP_ICM42605,
> + }, {
> + .compatible = "invensense,icm42622",
> + .data = (void *)INV_CHIP_ICM42622,
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, inv_icm42600_of_matches);
> +
> +static struct i2c_driver inv_icm42600_driver = {
> + .driver = {
> + .name = "inv-icm42600-i2c",
> + .of_match_table = inv_icm42600_of_matches,
> + .pm = &inv_icm42600_pm_ops,
> + },
> + .probe_new = inv_icm42600_probe,
> +};
> +module_i2c_driver(inv_icm42600_driver);
> +
> +MODULE_AUTHOR("InvenSense, Inc.");
> +MODULE_DESCRIPTION("InvenSense ICM-426xx I2C driver");
> +MODULE_LICENSE("GPL");
