Minimal and maximal frequencies supported by a sensor is queried.
On some older machines, these frequencies are not returned properly and
the EC returns 0 instead.
When returned maximal frequency is 0, ignore the information and use
default frequencies instead.
Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
---
.../common/cros_ec_sensors/cros_ec_sensors_core.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index 36e3f20891f05..8437ff659260b 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -289,7 +289,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
struct cros_ec_sensorhub *sensor_hub = dev_get_drvdata(dev->parent);
struct cros_ec_dev *ec = sensor_hub->ec;
struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
- u32 ver_mask;
+ u32 ver_mask, temp;
int frequencies[ARRAY_SIZE(state->frequencies) / 2] = { 0 };
int ret, i;
@@ -345,8 +345,17 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
&frequencies[2],
&state->fifo_max_event_count);
} else {
- frequencies[1] = state->resp->info_3.min_frequency;
- frequencies[2] = state->resp->info_3.max_frequency;
+ if (state->resp->info_3.max_frequency == 0) {
+ get_default_min_max_freq(state->resp->info.type,
+ &frequencies[1],
+ &frequencies[2],
+ &temp);
+ } else {
+ frequencies[1] =
+ state->resp->info_3.min_frequency;
+ frequencies[2] =
+ state->resp->info_3.max_frequency;
+ }
state->fifo_max_event_count =
state->resp->info_3.fifo_max_event_count;
}
--
2.27.0.212.ge8ba1cc988-goog
