Linux GPIO
[Prev Page][Next Page]
- [PATCH v3 11/11] MAINTAINERS: add an entry for max77650 mfd driver, (continued)
- [PATCH -next] gpio: tqmx86: Drop unnecessary gpiochip_remove in tqmx86_gpio_probe(),
Wei Yongjun
- [PATCH] pinctrl: qcom: qcs404: Drop unused UFS_RESET macro,
Bjorn Andersson
- [PATCH] pinctrl: qcom: qcs404: Correct SDC tile,
Bjorn Andersson
- [PATCH v2 0/7] add support for SAM9X60 pin controller,
Claudiu.Beznea
- [PATCH 0/7] add support for SAM9X60 pin controller,
Claudiu.Beznea
- [RFC PATCH v4 00/10] support ROHM BD70528 PMIC,
Matti Vaittinen
- [RFC PATCH v4 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts, Matti Vaittinen
- [RFC PATCH v4 02/10] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
- [RFC PATCH v4 03/10] clk: bd718x7: use chip specific and generic data structs, Matti Vaittinen
- [RFC PATCH v4 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
- [RFC PATCH v4 05/10] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
- [RFC PATCH v4 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
- [RFC PATCH v4 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
- [RFC PATCH v4 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
- [RFC PATCH v4 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
- [RFC PATCH v4 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
- [PATCH 1/2] gpio: Add DT bindings for Gateworks PLD GPIO,
Linus Walleij
- [PATCH] dt-bindings: Add a prefix for Gateworks Corporation, Linus Walleij
- [PATCHv2] gpio: MT7621: use a per instance irq_chip structure,
René van Dorst
- [PATCH] gpio: MT7621: use a per instance irq_chip structure,
René van Dorst
- [PATCH v7 1/6] mfd: lochnagar: Add initial binding documentation,
Charles Keepax
- [PATCH] RFT: spi: bcm2835: Convert to use CS GPIO descriptors,
Linus Walleij
- [GIT PULL] GPIO fixes for the v5.0 series, take two,
Linus Walleij
- [RFC PATCH v3 00/10] support ROHM BD70528 PMIC,
Matti Vaittinen
- [RFC PATCH v3 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts, Matti Vaittinen
- [RFC PATCH v3 02/10] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
- [RFC PATCH v3 03/10] clk: bd718x7: use chip specific and generic data structs, Matti Vaittinen
- [RFC PATCH v3 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
- [RFC PATCH v3 05/10] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
- [RFC PATCH v3 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
- [RFC PATCH v3 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
- [RFC PATCH v3 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
- [RFC PATCH v3 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
- [RFC PATCH v3 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
- [PATCH] dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding,
Jonathan Neuschäfer
- [PATCH v2 00/13] mfd: add support for max77650 PMIC,
Bartosz Golaszewski
- [PATCH v2 13/13] MAINTAINERS: add an entry for max77650 mfd driver, Bartosz Golaszewski
- [PATCH v2 05/13] dt-bindings: leds: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH v2 06/13] dt-bindings: input: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH v2 10/13] gpio: max77650: add GPIO support, Bartosz Golaszewski
- [PATCH v2 12/13] input: max77650: add onkey support, Bartosz Golaszewski
- [PATCH v2 11/13] leds: max77650: add LEDs support, Bartosz Golaszewski
- [PATCH v2 09/13] power: supply: max77650: add support for battery charger, Bartosz Golaszewski
- [PATCH v2 08/13] regulator: max77650: add regulator support, Bartosz Golaszewski
- [PATCH v2 07/13] mfd: max77650: new core mfd driver, Bartosz Golaszewski
- [PATCH v2 04/13] dt-bindings: gpio: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH v2 03/13] dt-bindings: power: supply: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH v2 01/13] dt-bindings: mfd: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH] gpio fixup domain, Bartosz Golaszewski
- [PATCH v2 02/13] dt-bindings: regulator: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH v2 0/9] gpio: mockup: improve the user-space testing interface,
Bartosz Golaszewski
- [PATCH v2 3/9] irq/irq_sim: provide irq_sim_fire_type(), Bartosz Golaszewski
- [PATCH v2 9/9] gpio: mockup: rework debugfs interface, Bartosz Golaszewski
- [PATCH v2 7/9] gpio: mockup: change the type of 'offset' to unsigned int, Bartosz Golaszewski
- [PATCH v2 8/9] gpio: mockup: change the signature of unlocked get/set helpers, Bartosz Golaszewski
- [PATCH v2 5/9] gpio: mockup: implement get_multiple(), Bartosz Golaszewski
- [PATCH v2 6/9] gpio: mockup: don't create the debugfs link named after the label, Bartosz Golaszewski
- [PATCH v2 2/9] irq/irq_sim: use irq domain, Bartosz Golaszewski
- [PATCH v2 4/9] gpio: mockup: add locking, Bartosz Golaszewski
- [PATCH v2 1/9] irq/irq_sim: don't share the irq_chip structure between simulators, Bartosz Golaszewski
- Re: [PATCH v2 0/9] gpio: mockup: improve the user-space testing interface, Bartosz Golaszewski
- [PATCH v3 1/2] dt-bindings: imx: Add pinctrl binding doc for imx8mm,
Jacky Bai
- [PATCH] pinctrl: mediatek: fix dependencies for PINCTRL_MT76XX,
Dmitry Voytik
- [PATCH AUTOSEL 4.20 128/304] pinctrl: nuvoton: check for devm_kasprintf() failure, Sasha Levin
- [PATCH AUTOSEL 4.20 136/304] gpio: mt7621: report failure of devm_kasprintf(), Sasha Levin
- [PATCH AUTOSEL 4.20 137/304] gpio: mt7621: pass mediatek_gpio_bank_probe() failure up the stack, Sasha Levin
- [PATCH AUTOSEL 4.20 138/304] pinctrl: sx150x: handle failure case of devm_kstrdup, Sasha Levin
- [PATCH AUTOSEL 4.20 255/304] pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins, Sasha Levin
- [PATCH AUTOSEL 4.20 206/304] pinctrl: rza1: Handle devm_kasprintf() failure cases, Sasha Levin
- [PATCH AUTOSEL 4.19 006/258] gpiolib: Fix possible use after free on label, Sasha Levin
- [PATCH AUTOSEL 4.19 004/258] pinctrl: bcm2835: Use raw spinlock for RT compatibility, Sasha Levin
- [PATCH AUTOSEL 4.19 115/258] gpio: mt7621: report failure of devm_kasprintf(), Sasha Levin
- [PATCH AUTOSEL 4.19 116/258] gpio: mt7621: pass mediatek_gpio_bank_probe() failure up the stack, Sasha Levin
- [PATCH AUTOSEL 4.19 117/258] pinctrl: sx150x: handle failure case of devm_kstrdup, Sasha Levin
- [PATCH AUTOSEL 4.19 214/258] pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins, Sasha Levin
- [PATCH AUTOSEL 4.19 213/258] pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins, Sasha Levin
- [PATCH AUTOSEL 4.14 074/170] pinctrl: sx150x: handle failure case of devm_kstrdup, Sasha Levin
- [PATCH AUTOSEL 4.14 136/170] pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins, Sasha Levin
- [PATCH AUTOSEL 4.9 080/107] pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins, Sasha Levin
- [PATCH AUTOSEL 4.9 081/107] pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins, Sasha Levin
- [PATCH AUTOSEL 4.14 135/170] pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins, Sasha Levin
- [PATCH AUTOSEL 4.14 004/170] pinctrl: bcm2835: Use raw spinlock for RT compatibility, Sasha Levin
- [PATCH AUTOSEL 4.20 256/304] pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins, Sasha Levin
- [PATCH] gpio: vf610: Mask all GPIO interrupts,
Andrew Lunn
- [PATCH v1] gpiolib: acpi: Correct kernel doc of struct acpi_gpio_event,
Andy Shevchenko
- [PATCH v2 00/10] pinctrl: sh-pfc: Validation and compile-testing,
Geert Uytterhoeven
- [PATCH v2 06/10] pinctrl: sh-pfc: Validate enum IDs for regs with fixed-width fields, Geert Uytterhoeven
- [PATCH v2 01/10] pinctrl: sh-pfc: Validate fixed-size field widths at build time, Geert Uytterhoeven
- [PATCH v2 08/10] pinctrl: sh-pfc: Introduce PINCTRL_SH_FUNC_GPIO helper symbol, Geert Uytterhoeven
- [PATCH v2 02/10] pinctrl: sh-pfc: Validate pinmux tables at runtime when debugging, Geert Uytterhoeven
- [PATCH v2 04/10 PARTIAL] pinctrl: sh-pfc: Absorb enum IDs in PINMUX_CFG_REG_VAR() macro, Geert Uytterhoeven
- [PATCH v2 05/10 PARTIAL] pinctrl: sh-pfc: Absorb enum IDs in PINMUX_DATA_REG() macro, Geert Uytterhoeven
- [PATCH v2 03/10 PARTIAL] pinctrl: sh-pfc: Absorb enum IDs in PINMUX_CFG_REG() macro, Geert Uytterhoeven
- [PATCH v2 10/10] pinctrl: sh-pfc: Allow compile-testing of all drivers, Geert Uytterhoeven
- [PATCH v2 09/10] pinctrl: sh-pfc: Add missing #include <linux/errno.h>, Geert Uytterhoeven
- [PATCH v2 07/10] pinctrl: sh-pfc: Validate enum IDs for regs with variable-width fields, Geert Uytterhoeven
- [PATCH 0/9] qcom: ssbi-gpio: add support for hierarchical IRQ chip,
Brian Masney
- [PATCH 9/9] mfd: pm8xxx: revert "disassociate old virq if hwirq mapping already exists", Brian Masney
- [PATCH 8/9] arm: dts: qcom: mdm9615: add interrupt controller properties, Brian Masney
- [PATCH 7/9] arm: dts: qcom: msm8660: add interrupt controller properties, Brian Masney
- [PATCH 6/9] arm: dts: qcom: apq8064: add interrupt controller properties, Brian Masney
- [PATCH 5/9] qcom: ssbi-gpio: add support for hierarchical IRQ chip, Brian Masney
- [PATCH 3/9] mfd: pm8xxx: convert to v2 irq interfaces to support hierarchical IRQ chips, Brian Masney
- [PATCH 2/9] genirq: introduce irq_domain_translate_twocell, Brian Masney
- [PATCH 1/9] pinctrl: qcom: ssbi-gpio: hardcode IRQ counts, Brian Masney
- [PATCH 4/9] mfd: pm8xxx: disassociate old virq if hwirq mapping already exists, Brian Masney
- Re: [PATCH 0/9] qcom: ssbi-gpio: add support for hierarchical IRQ chip, Linus Walleij
- [PATCH 0/4] pinctrl: sh-pfc: Miscellaneous pinmux fixes,
Geert Uytterhoeven
- [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block,
Matti Vaittinen
- [RFC PATCH v2 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block,
Matti Vaittinen
- [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC,
Matti Vaittinen
- [RFC PATCH v2 07/10] gpio: Initial support for ROHM bd70528 GPIO block,
Matti Vaittinen
- [RFC PATCH v2 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
- [RFC PATCH v2 05/10] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
- [RFC PATCH v2 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
- [RFC PATCH v2 03/10] clk: bd718x7: use chip specific and generic data structs, Matti Vaittinen
- [RFC PATCH v2 02/10] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
- [RFC PATCH v2 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts, Matti Vaittinen
- [RFC PATCH v2 00/10] support ROHM BD70528 PMIC,
Matti Vaittinen
- Ingenic pinctrl fixes.,
Zhou Yanjie
- [PATCH] pinctrl: berlin: as370: use generic "pwm" as pwm function name,
Jisheng Zhang
- [PATCH v3] gpio: tqmx86: Add GPIO from for this IO controller,
Andrew Lunn
- [git pull] pinctrl: sh-pfc: Updates for v5.1,
Geert Uytterhoeven
- Re: [alsa-devel] [RFT][PATCH v2] gpiolib: acpi: Introduce ACPI_GPIO_QUIRK_ONLY_GPIOIO,
Hans de Goede
- [PATCH 1/1] gpio: altera: Fixup block comment style,
Phil Reid
- [PATCH 4/4] Pinctrl: Ingenic: Fix const declaration., Zhou Yanjie
- [PATCH 1/4] Pinctrl: Ingenic: Fix bugs caused by differences between JZ4770 and JZ4780., Zhou Yanjie
- [PATCH 3/4] Pinctrl: Ingenic: Unify the function name prefix to "ingenic_gpio_"., Zhou Yanjie
- [PATCH 2/4] Pinctrl: Ingenic: Add missing parts for JZ4770 and JZ4780., Zhou Yanjie
- [GIT PULL] gpio fixes for v5.0-rc4,
Bartosz Golaszewski
- [PATCH 0/9] gpio: mockup: improve the user-space testing interface,
Bartosz Golaszewski
- [PATCH 7/9] gpio: mockup: change the type of 'offset' to unsigned int, Bartosz Golaszewski
- [PATCH 8/9] gpio: mockup: change the signature of unlocked get/set helpers, Bartosz Golaszewski
- [PATCH 9/9] gpio: mockup: rework debugfs interface, Bartosz Golaszewski
- [PATCH 2/9] irq/irq_sim: use irq domain, Bartosz Golaszewski
- [PATCH 1/9] irq/irq_sim: don't share the irq_chip structure between simulators, Bartosz Golaszewski
- [PATCH 3/9] irq/irq_sim: provide irq_sim_get_type(), Bartosz Golaszewski
- [PATCH 6/9] gpio: mockup: don't create the debugfs link named after the label, Bartosz Golaszewski
- [PATCH 5/9] gpio: mockup: implement get_multiple(), Bartosz Golaszewski
- [PATCH 4/9] gpio: mockup: add locking, Bartosz Golaszewski
- Re: [PATCH 0/9] gpio: mockup: improve the user-space testing interface, Linus Walleij
- [PATCH] gpio: tegra186: Use TEGRA186_ prefix for GPIO names,
Thierry Reding
- [PATCH -next] gpio: davinci: drop pointless static qualifier,
YueHaibing
- [PATCH -next] pinctrl: sirf: drop pointless static qualifier in sirfsoc_gpio_probe,
YueHaibing
- [PATCH -next] pinctrl: ti-iodelay: Fix platform_no_drv_owner.cocci warnings,
YueHaibing
- [PATCH v3 1/2] gpio: altera-a10sr: Set proper output level for direction_output,
Axel Lin
- [PATCH v2 0/2] pinctrl: remove unused 'pinconf-config' debugfs interface,
Vladimir Zapolskiy
- Re: [PATCH] gpio-f7188x: add support Fintek F81804 & F81966, Linus Walleij
- [PATCH] input: keyboard: gpio-keys-polled: use input name from pdata if available, Enrico Weigelt, metux IT consult
- combined gpio IRQCHIP, Ramon Fried
- [PATCH v2 1/2] dt-bindings: imx: Add pinctrl binding doc for imx8mm,
Jacky Bai
- [RFC PATCH v1 00/13] support ROHM BD70528 PMIC,
Matti Vaittinen
- [RFC PATCH v1 01/13] regmap: regmap-irq: Add main status register support, Matti Vaittinen
- [RFC PATCH v1 02/13] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts, Matti Vaittinen
- [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
- [RFC PATCH v1 04/13] clk: bd718x7: use chip specific and generic data structs, Matti Vaittinen
- [RFC PATCH v1 05/13] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
- [RFC PATCH v1 06/13] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
- [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
- [RFC PATCH v1 08/13] regulator: bd70528: Support ROHM BD70528 regulator block, Matti Vaittinen
- [RFC PATCH v1 09/13] devicetree: bindings: ROHM bd70528 regulator bindings, Matti Vaittinen
- [RFC PATCH v1 10/13] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
- [RFC PATCH v1 11/13] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
- [RFC PATCH v1 12/13] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
- [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
- [PATCH v3] pinctrl: freescale: fix link errors,
Anders Roxell
- Re: [PATCH v2 3/3] pinctrl: upboard: Add UP2 pinctrl and gpio driver, Dan O'Donovan
- [PATCH] pinctrl.txt: Remove outdated information,
Ramon Fried
- pinctrl: -EAGAIN not supported but documented,
Ramon Fried
- [PATCH] gpio: sprd: Remove unused irq trigger setting,
Baolin Wang
- [PATCH RFC V2 0/4] pinctrl: bcm2835: improve libgpiod output,
Stefan Wahren
- [PATCH] pinctrl: remove unused 'pinconf-config' debugfs interface,
Vladimir Zapolskiy
- [PATCH v6 00/15] qcom: spmi: add support for hierarchical IRQ chip,
Brian Masney
- [PATCH v6 13/15] arm64: dts: qcom: pmi8998: add interrupt controller properties, Brian Masney
- [PATCH v6 15/15] spmi: pmic-arb: revert "disassociate old virq if hwirq mapping already exists", Brian Masney
- [PATCH v6 14/15] spmi: pmic-arb: validate type when mapping IRQ, Brian Masney
- [PATCH v6 11/15] arm64: dts: qcom: pm8998: add interrupt controller properties, Brian Masney
- [PATCH v6 12/15] arm64: dts: qcom: pmi8994: add interrupt controller properties, Brian Masney
- [PATCH v6 10/15] arm64: dts: qcom: pm8005: add interrupt controller properties, Brian Masney
- [PATCH v6 09/15] ARM: dts: qcom: pma8084: add interrupt controller properties, Brian Masney
- [PATCH v6 07/15] qcom: spmi-gpio: add support for hierarchical IRQ chip, Brian Masney
- [PATCH v6 08/15] ARM: dts: qcom: pm8941: add interrupt controller properties, Brian Masney
- [PATCH v6 06/15] spmi: pmic-arb: disassociate old virq if hwirq mapping already exists, Brian Masney
- [PATCH v6 05/15] gpio: add irq domain activate/deactivate functions, Brian Masney
- [PATCH v6 04/15] spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips, Brian Masney
- [PATCH v6 03/15] pinctrl: qcom: spmi-gpio: hardcode IRQ counts, Brian Masney
- [PATCH v6 01/15] dt-bindings: pinctrl: qcom-pmic-gpio: add qcom,pmi8998-gpio binding, Brian Masney
- [PATCH v6 02/15] pinctrl: qcom: spmi-gpio: add support for three new variants, Brian Masney
- Re: [PATCH v6 00/15] qcom: spmi: add support for hierarchical IRQ chip, Linus Walleij
- Re: [PATCH v6 00/15] qcom: spmi: add support for hierarchical IRQ chip, Linus Walleij
- [PATCH 00/13] mfd: add support for max77650 PMIC,
Bartosz Golaszewski
- [PATCH 05/13] dt-bindings: leds: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH 13/13] MAINTAINERS: add an entry for max77650 mfd driver, Bartosz Golaszewski
- [PATCH 12/13] input: max77650: add onkey support, Bartosz Golaszewski
- [PATCH 11/13] leds: max77650: add LEDs support, Bartosz Golaszewski
- [PATCH 10/13] gpio: max77650: add GPIO support, Bartosz Golaszewski
- [PATCH 09/13] power: supply: max77650: add support for battery charger, Bartosz Golaszewski
- [PATCH 08/13] regulator: max77650: add regulator support, Bartosz Golaszewski
- [PATCH 07/13] mfd: max77650: new core mfd driver, Bartosz Golaszewski
- [PATCH 06/13] dt-bindings: input: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH 04/13] dt-bindings: gpio: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH 02/13] dt-bindings: regulator: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH 03/13] dt-bindings: power: supply: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH 01/13] dt-bindings: mfd: add DT bindings for max77650, Bartosz Golaszewski
- [PATCH v2] gpio: rcar: select General Output Register to set output states,
Vladimir Zapolskiy
- [PATCH v6 1/6] mfd: lochnagar: Add initial binding documentation,
Charles Keepax
- [PATCH v2 1/2] gpio: altera-a10sr: Set proper output level for direction_output,
Axel Lin
[PATCH 0/3] pinctrl: meson: g12a fixes,
Jerome Brunet
[PATCH] gpio: altera-a10sr: Set proper output level for direction_output,
Axel Lin
[PATCH] Documentation: gpio: driver: fix wire name for I2C,
Wolfram Sang
[PATCH v5 00/14] qcom: spmi: add support for hierarchical IRQ chip,
Brian Masney
- [PATCH v5 05/14] gpio: add irq domain activate/deactivate functions, Brian Masney
- [PATCH v5 10/14] arm64: dts: qcom: pm8005: add interrupt controller properties, Brian Masney
- [PATCH v5 11/14] arm64: dts: qcom: pm8998: add interrupt controller properties, Brian Masney
- [PATCH v5 12/14] arm64: dts: qcom: pmi8994: add interrupt controller properties, Brian Masney
- [PATCH v5 13/14] arm64: dts: qcom: pmi8998: add interrupt controller properties, Brian Masney
- [PATCH v5 14/14] spmi: pmic-arb: revert "disassociate old virq if hwirq mapping already exists", Brian Masney
- [PATCH v5 08/14] ARM: dts: qcom: pm8941: add interrupt controller properties, Brian Masney
- [PATCH v5 03/14] pinctrl: qcom: spmi-gpio: hardcode IRQ counts, Brian Masney
- [PATCH v5 04/14] spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips, Brian Masney
- [PATCH v5 06/14] spmi: pmic-arb: disassociate old virq if hwirq mapping already exists, Brian Masney
- [PATCH v5 07/14] qcom: spmi-gpio: add support for hierarchical IRQ chip, Brian Masney
- [PATCH v5 02/14] pinctrl: qcom: spmi-gpio: add support for three new variants, Brian Masney
- [PATCH v5 01/14] dt-bindings: pinctrl: qcom-pmic-gpio: add qcom,pmi8998-gpio binding, Brian Masney
- [PATCH v5 09/14] ARM: dts: qcom: pma8084: add interrupt controller properties, Brian Masney
[PATCH] pinctrl: sh-pfc: Print pin group when debugging,
Geert Uytterhoeven
[PATCH] pinctrl: sh-pfc: r8a7778: Fix HSPI pin numbers and names,
Geert Uytterhoeven
[PATCH] pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3,
Geert Uytterhoeven
[PATCH STABLE v4.19.15] gpiolib: fix line event timestamps for nested irqs,
Bartosz Golaszewski
[PATCH] gpio: madera: Add missing const,
Charles Keepax
[PATCH 1/2] gpio: pca953x: reduce indentation level in pca953x_irq_setup(),
Thomas Petazzoni
[PATCH 1/4 v3] spi: Support high CS when using descriptors,
Linus Walleij
[PATCH v2 1/2] gpio: sprd: Fix the incorrect data register,
Baolin Wang
gpio-f7188x.c Add support for Fintek F81804 & F81966 S/IO,
Steffen Kothe
[GIT PULL] gpio: fixes for v5.0,
Bartosz Golaszewski
[PATCH] pinctrl: ti: iodelay: Lower the priority of prints,
Tero Kristo
[PATCH 1/2] gpio: sprd: Fix the incorrect data register,
Baolin Wang
[PATCH] pinctrl: cherryview: fix Strago DMI workaround,
Dmitry Torokhov
[PATCH] pinctrl: sunxi: Correct number of IRQ banks on H6 main pin controller,
Chen-Yu Tsai
[PATCH v2 0/2] GPIO: hlwd: Implement IRQ support,
Jonathan Neuschäfer
[PATCH v2] pinctrl: freescale: fix link errors,
Anders Roxell
[PATCH 2/3] pinctrl: freescale: fix link errors,
Anders Roxell
[GIT PULL] GPIO fixes for v5.0,
Linus Walleij
[PATCH v8 0/8] Introduce the for_each_set_clump8 macro,
William Breathitt Gray
[PATCH RFC] gpiolib: Take MUX usage into account,
Stefan Wahren
[PATCH v4 00/14] qcom: spmi: add support for hierarchical IRQ chip,
Brian Masney
- [PATCH v4 08/14] ARM: dts: qcom: pm8941: add interrupt controller properties, Brian Masney
- [PATCH v4 11/14] arm64: dts: qcom: pm8998: add interrupt controller properties, Brian Masney
- [PATCH v4 12/14] arm64: dts: qcom: pmi8994: add interrupt controller properties, Brian Masney
- [PATCH v4 14/14] spmi: pmic-arb: revert "disassociate old virq if hwirq mapping already exists", Brian Masney
- [PATCH v4 02/14] pinctrl: qcom: spmi-gpio: add support for three new variants, Brian Masney
- [PATCH v4 03/14] pinctrl: qcom: spmi-gpio: hardcode IRQ counts, Brian Masney
- [PATCH v4 09/14] ARM: dts: qcom: pma8084: add interrupt controller properties, Brian Masney
- [PATCH v4 10/14] arm64: dts: qcom: pm8005: add interrupt controller properties, Brian Masney
- [PATCH v4 13/14] arm64: dts: qcom: pmi8998: add interrupt controller properties, Brian Masney
- [PATCH v4 07/14] qcom: spmi-gpio: add support for hierarchical IRQ chip, Brian Masney
- [PATCH v4 06/14] spmi: pmic-arb: disassociate old virq if hwirq mapping already exists, Brian Masney
- [PATCH v4 05/14] gpio: add irq domain activate/deactivate functions, Brian Masney
- [PATCH v4 04/14] spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips, Brian Masney
- [PATCH v4 01/14] dt-bindings: pinctrl: qcom-pmic-gpio: add qcom,pmi8998-gpio binding, Brian Masney
- Re: [PATCH v4 00/14] qcom: spmi: add support for hierarchical IRQ chip, Linus Walleij
[PATCH 0/2] GPIO: hlwd: Implement IRQ support,
Jonathan Neuschäfer
[PATCH v2 1/2] pinctrl: sunxi: Fix and simplify pin bank regulator handling,
Chen-Yu Tsai
[PATCH v4 0/1] Meson8b RGMII Ethernet pin fixes,
Martin Blumenstingl
[PATCH v7 0/8] Introduce the for_each_set_clump8 macro,
William Breathitt Gray
[PATCH v2] gpio: tqmx86: Add GPIO from for this IO controller,
Andrew Lunn
Re: [PATCH v3 1/2] pinctrl: meson: meson8b: add the eth_rxd2 and eth_rxd3 pins,
Martin Blumenstingl
[Index of Archives]
[Linux SPI]
[Security]
[Linux ARM]
[Fedora ARM]
[eCos]
[Linux MIPS]
[Bugtraq]
