Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block

[Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>]

On Wed, Jan 23, 2019 at 06:47:28PM +0100, Sebastian Reichel wrote:
> Hi,
> 
> On Tue, Jan 22, 2019 at 08:03:09PM +0200, Matti Vaittinen wrote:
> > On Tue, Jan 22, 2019 at 09:40:56AM -0800, Guenter Roeck wrote:
> > > On Tue, Jan 22, 2019 at 07:10:23PM +0200, Matti Vaittinen wrote:
> > > > On Tue, Jan 22, 2019 at 07:47:50AM -0800, Guenter Roeck wrote:
> > > > > On Tue, Jan 22, 2019 at 11:48:36AM +0200, Matti Vaittinen wrote:
> > > > > > +static int bd70528_wdt_probe(struct platform_device *pdev)
> > > > > > +{
> > > > > > +	struct bd70528 *tmp;
> > > > > > +	struct bd70528 *bd70528;
> > > > > > +	int ret;
> > > > > > +
> > > > > > +	tmp = dev_get_drvdata(pdev->dev.parent);
> > > > > > +	if (!tmp) {
> > > > > > +		dev_err(&pdev->dev, "No MFD driver data\n");
> > > > > > +		return -EINVAL;
> > > > > > +	}
> > > > > > +	bd70528 = devm_kzalloc(&pdev->dev, sizeof(*bd70528), GFP_KERNEL);
> > > > > > +	if (!bd70528)
> > > > > > +		return -ENOMEM;
> > > > > > +
> > > > > > +	*bd70528 = *tmp;
> > > > > > +	bd70528->chip.dev = &pdev->dev;
> > > > > 
> > > > > This is wrong.
> > > > > You should not copy the parent's driver data but have local driver
> > > > > data as needed which then points to the parent's driver data if
> > > > > needed. I assume this is why the mutex is a pointer, but that
> > > > > just shows that the whole approach is wrong.
> > > > 
> > > > Mutex is a pointer because we want to use same mutex from WDT and RTC.
> > > > We can sure point to parent data but then we still need our own dev
> > > > pointer. So we can have a struct with pointer to parent data and dev
> > > > pointer - but I'm not at all sure it is any clearer.
> > > 
> > > As I said, that is wrong. To say it in plaintext, I won't accept
> > > the driver if it copies the parent's driver data. The driver should
> > > have and use its own driver data, and only maintain a pointer to
> > > its parent's driver data. And most definitely you don't want to
> > > copy and use any device data structure from the parent.
> > 
> > Allright. At the moment the WDT driver only needs regmap pointer from
> > parent. I'm not sure if it will later need DT or "chip type" - but I
> > will change this.
> 
> You probably want to use this:
> 
> dev_get_regmap(pdev->dev.parent, NULL);

Thanks a bunch Sebastian. All help is highly appreciated!! =)

Unfortunately I forgot to mention the key thing - the RTC mutex. We also
need that because RTC needs to stop WDT when RTC is adjusted as the WDT
uses RTC as counter - and jumping the RTC WDT enabled might trigger WDT
or have other consequences.

Se even if we used dev_get_regmap (which is slightly heavier than
accessing direct pointer) - we would still need at least the mutex from
parent data, possibly also the chip type and if we want to avoid code
dublication - then also the WDT start/stop function.

Thus I guess we can as well keep the regmap in parent data because we
need the parent data anyways, right?

Br
	Matti Vaittinen

-- 
Matti Vaittinen
ROHM Semiconductors

~~~ "I don't think so," said Rene Descartes.  Just then, he vanished ~~~