[PATCH v6 03/15] pinctrl: qcom: spmi-gpio: hardcode IRQ counts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The probing of this driver calls platform_irq_count, which will
setup all of the IRQs that are configured in device tree. In
preparation for converting this driver to be a hierarchical IRQ
chip, hardcode the IRQ count based on the hardware type so that all
the IRQs are not configured immediately and are configured on an
as-needed basis later in the boot process. This change will also
allow for the removal of the interrupts property later in this
patch series once the hierarchical IRQ chip support is in.

This patch also removes the generic qcom,spmi-gpio OF match since we
don't know the number of pins. All of the existing upstream bindings
already include the more-specific binding.

The pm8941 code was tested on a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
Changes since v5:
- None

Changes since v4:
- Remove unnecessary u16 cast on device_get_match_data()

Changes since v3:
- More variants are now included. I missed these since I searched for
  qcom,spmi-gpio in the arm dts, and missed the ones in the arm64 dts.
 
Changes since v2:
- Don't move pmic_gpio_of_match block. Use device_get_match_data instead
  of of_match_device. 
- Correct build warning on arm64: warning: cast from pointer to integer
  of different size

 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 28 ++++++++++--------------
 1 file changed, 11 insertions(+), 17 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index 5f2977982ef1..b6fa2c7dbb26 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -951,13 +951,7 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	npins = platform_irq_count(pdev);
-	if (!npins)
-		return -EINVAL;
-	if (npins < 0)
-		return npins;
-
-	BUG_ON(npins > ARRAY_SIZE(pmic_gpio_groups));
+	npins = (uintptr_t) device_get_match_data(&pdev->dev);
 
 	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
 	if (!state)
@@ -1063,16 +1057,16 @@ static int pmic_gpio_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id pmic_gpio_of_match[] = {
-	{ .compatible = "qcom,pm8005-gpio" },	/* 4 GPIO's */
-	{ .compatible = "qcom,pm8916-gpio" },	/* 4 GPIO's */
-	{ .compatible = "qcom,pm8941-gpio" },	/* 36 GPIO's */
-	{ .compatible = "qcom,pm8994-gpio" },	/* 22 GPIO's */
-	{ .compatible = "qcom,pmi8994-gpio" },  /* 10 GPIO's */
-	{ .compatible = "qcom,pm8998-gpio" },	/* 26 GPIO's */
-	{ .compatible = "qcom,pmi8998-gpio" },	/* 14 GPIO's */
-	{ .compatible = "qcom,pma8084-gpio" },	/* 22 GPIO's */
-	{ .compatible = "qcom,pms405-gpio" },	/* 12 GPIO's, holes on 1 9 10 */
-	{ .compatible = "qcom,spmi-gpio" }, /* Generic */
+	{ .compatible = "qcom,pm8005-gpio", .data = (void *) 4 },
+	{ .compatible = "qcom,pm8916-gpio", .data = (void *) 4 },
+	{ .compatible = "qcom,pm8941-gpio", .data = (void *) 36 },
+	{ .compatible = "qcom,pm8994-gpio", .data = (void *) 22 },
+	{ .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 },
+	{ .compatible = "qcom,pm8998-gpio", .data = (void *) 26 },
+	{ .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
+	{ .compatible = "qcom,pma8084-gpio", .data = (void *) 22 },
+	/* pms405 has 12 GPIOs with holes on 1, 9, and 10 */
+	{ .compatible = "qcom,pms405-gpio", .data = (void *) 12 },
 	{ },
 };
 
-- 
2.17.2




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux