Document bindings for regulators (3 bucks, 3 LDOs and 2 LED drivers) and 4 GPIO pins which can be configured for I/O or as interrupt sources withe configurable trigger levels. Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx> --- .../devicetree/bindings/mfd/rohm,bd70528-pmic.txt | 102 +++++++++++++++++++++ 1 file changed, 102 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt new file mode 100644 index 000000000000..f80be7e40184 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt @@ -0,0 +1,102 @@ +* ROHM BD70528 Power Management Integrated Circuit bindings + +BD70528MWV is an ultra-low Iq general purpose single-chip power management IC +for battery-powered portable devices. The IC integrates 3 ultra-low current +consumption buck converters, 3 LDOs and 2 LED Drivers. Also included are 4 +GPIOs, a real-time clock (RTC), a 32kHz clock gate, high-accuracy VREF +for use with an external ADC, flexible dual-input power path, 10 bits SAR ADC +for battery temperature monitor and 1S battery charger with scalable charge +currents. + +Required properties: + - compatible : Should be "rohm,bd70528" + - reg : I2C slave address. + - interrupts : The interrupt line the device is connected to. + - interrupt-controller : To indicate bd70528 acts as an interrupt controller. + - #interrupt-cells : Should be 2. usage is compliant to the 2 cells + variant of ../interrupt-controller/interrupts.txt + - gpio-controller : To indicate bd70528 acts as a gpio controller. + - #gpio-cells : Should be 2. The first cell is the pin number and + the second cell is used to specify flags. See + ../gpio/gpio.txt for more information. + - #clock-cells : Should be 0. + - regulators: : List of child nodes that specify the regulators. + Please see ../regulator/rohm,bd70528-regulator.txt + +Optional properties: + - clock-output-names : Should contain name for output clock. + +Example: +/* external oscillator */ +osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <32768>; + clock-output-names = "osc"; +}; + +pmic: pmic@4b { + compatible = "rohm,bd70528"; + reg = <0x4b>; + interrupt-parent = <&gpio1>; + interrupts = <29 GPIO_ACTIVE_LOW>; + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd70528-32k-out"; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-ramp-delay = <125>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-ramp-delay = <125>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-ramp-delay = <250>; + }; + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + }; + led_ldo1: LED_LDO1 { + regulator-name = "led_ldo1"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <300000>; + }; + led_ldo2: LED_LDO2 { + regulator-name = "led_ldo2"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <300000>; + }; + }; +}; -- 2.14.3 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then, he vanished ~~~