Linux Frame Buffer Development
[Prev Page][Next Page]
- Re: [PATCH] video: exynos_dp: adjust voltage swing and pre-emphasis during Link Training
- From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
- Re: [PATCH 0/2] OMAPDSS: fixes for -rc
- From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
- Re: [patch] video: mb862xxfb: prevent divide by zero bug
- From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
- Re: [PATCH 1/3] drivers/video/auo_k190x.c: drop kfree of devm_kzalloc's data
- From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
- Re: [PATCH] fbcon: Fix bit_putcs() call to kmalloc(s, GFP_KERNEL)
- From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
- Re: [PATCH 2/4] fbcon: prevent possible buffer overflow.
- From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
- Re: [PATCH] pwm: Call pwm_enable() before pwm_config()
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] pwm: Call pwm_enable() before pwm_config()
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] pwm: Call pwm_enable() before pwm_config()
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH] pwm: Call pwm_enable() before pwm_config()
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH] pwm: Call pwm_enable() before pwm_config()
- From: Benoît Thébaudeau <benoit.thebaudeau@xxxxxxxxxxxx>
- Re: [PATCH] pwm: Call pwm_enable() before pwm_config()
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH 4/4] ARM: dts: mxs: add oled support for the cfa-10036
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH 3/4] ARM: dts: mxs: Add pwm4 muxing options for imx28
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH 2/4] ARM: dts: mxs: Add alternative I2C muxing options for imx28
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH] pwm: Call pwm_enable() before pwm_config()
- From: Benoît Thébaudeau <benoit.thebaudeau@xxxxxxxxxxxx>
- [PATCH 8/8] OMAPDSS: fix use of dssdev->caps
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 3/8] OMAP4: TWL: add vdda_hdmi_dac regulator supply
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 6/8] OMAPDSS: DSI: calculate dsi clock
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 7/8] OMAP: 4430SDP: remove DSI clock config from board file
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 5/8] OMAPDSS: Add DSI fclk maximum to dss_features
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 4/8] OMAPDSS: HDMI: use vdda_hdmi_dac
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 2/8] OMAPDSS: HDMI: Add delay to wait for 5V power
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 1/8] OMAPDSS: HDMI: Move GPIO handling to HDMI driver
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 0/8] OMAPDSS: Misc improvements
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [rtc-linux] RE: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [rtc-linux] [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 2/2] video: exynos_dp: move setting analog parameter and interrupt to after sw reset
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 1/2] video: exynos_dp: change return type of exynos_dp_init_video to void
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial
- From: Alan Cox <alan@xxxxxxxxxxxxxxx>
- RE: [PATCH V2 0/5] arm: samsung: Move FIMD headers to include/video/
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/4] ARM: dts: mxs: Add alternative I2C muxing options for imx28
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 3/4] ARM: dts: mxs: Add pwm4 muxing options for imx28
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 4/4] ARM: dts: mxs: add oled support for the cfa-10036
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCHv3 0/4]
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv4 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv4 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv4 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv4 6/9] arm: vt8500: Update arch-vt8500 to devicetree support.
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv4 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv4 9/9] arm: vt8500: clk: Add Common Clock Framework support
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- Re: [RFC 0/5] Generic panel framework
- From: Jun Nie <niej0001@xxxxxxxxx>
- Re: [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- Re: [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH -next] HID: picoLCD: Add missing #include <linux/uaccess.h>
- From: Jiri Kosina <jkosina@xxxxxxx>
- RE: [rtc-linux] [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/2] console_lock debug improvements
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [rtc-linux] [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH V6 0/6] OMAPDSS: Cleanup cpu_is checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- RE: [PATCH v4] da8xx-fb: allow frame to complete after disabling LCDC
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- Re: [PATCHv3 3/9] serial: vt8500: Add devicetree support for
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH V6 6/6] OMAPDSS: DPI: Remove cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V6 5/6] OMAPDSS: VENC: Remove cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V6 4/6] ARM: OMAP: Disable venc for OMAP4
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V6 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V6 2/6] OMAPDSS: DSS: Remove redundant functions
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V6 1/6] OMAPDSS: DISPC: Cleanup cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V6 0/6] OMAPDSS: Cleanup cpu_is checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- Re: [PATCHv3 3/9] serial: vt8500: Add devicetree support for
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCH v4] da8xx-fb: allow frame to complete after disabling LCDC
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- RE: [PATCH v5] da8xx-fb: add 24bpp LCD configuration support
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- Re: [PATCH] fbcon: fix race condition between console lock and cursor timer
- From: Dave Airlie <airlied@xxxxxxxxx>
- [PATCH 2/2] console: implement lockdep support for console_lock
- From: Daniel Vetter <daniel.vetter@xxxxxxxx>
- [PATCH 1/2] console: use might_sleep in console_lock
- From: Daniel Vetter <daniel.vetter@xxxxxxxx>
- [PATCH 0/2] console_lock debug improvements
- From: Daniel Vetter <daniel.vetter@xxxxxxxx>
- Re: [PATCHv3 3/9] serial: vt8500: Add devicetree support for vt8500-serial
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- [PATCHv3 9/9] arm: vt8500: clk: Add Common Clock Framework support
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv3 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv3 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv3 6/9] arm: vt8500: Update arch-vt8500 to devicetree support.
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv3 3/9] serial: vt8500: Add devicetree support for vt8500-serial
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv3 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv3 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv3 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCH -next] HID: picoLCD: Add missing #include <linux/uaccess.h>
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] fbcon: fix race condition between console lock and cursor timer
- From: Josh Boyer <jwboyer@xxxxxxxxx>
- Re: [PATCH] fbcon: fix race condition between console lock and cursor timer
- From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
- Re: [PATCH] fbcon: fix race condition between console lock and cursor timer
- From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
- Re: [PATCH V5 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH V5 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
- Re: [PATCH V5 5/6] ARM: OMAP: Disable venc for OMAP4
- From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
- Re: [PATCH V5 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
- Re: [PATCH V5 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH V5 5/6] ARM: OMAP: Disable venc for OMAP4
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH V5 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC 0/5] Generic panel framework
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] fbcon: fix race condition between console lock and cursor timer
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH] fbcon: fix race condition between console lock and cursor timer
- From: Dave Airlie <airlied@xxxxxxxxxx>
- [PATCH 2/2] OMAPFB: fix framebuffer console colors
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 1/2] OMAPDSS: Fix SDI PLL locking
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 0/2] OMAPDSS: fixes for -rc
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 15/23] OMAPDSS: RFBI: Add output pointers as arguments to all exported functions
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 23/23] OMAPDSS: Remove old way of setting manager and device links
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 13/23] OMAPDSS: SDI: Pass outputs from panel driver to SDI interface driver
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 22/23] OMAPDSS: APPLY: Remove omap_dss_device references from dss_ovl_enable/disable
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 21/23] OMAPDSS: MANAGER: Get device via output
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 20/23] OMAPDSS: MANAGER: Update display sysfs store
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 18/23] OMAPDSS: HDMI: Add output pointers as arguments to all functions used by hdmi panel driver
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 19/23] OMAPDSS/OMAPFB: Change dssdev->manager references
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 17/23] OMAPDSS: HDMI: Pass outputs from panel driver to HDMI interface driver
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 16/23] OMAPDSS: VENC: Pass outputs from panel driver to VENC interface driver
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 14/23] OMAPDSS: RFBI: Pass outputs from panel driver to RFBI interface driver
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 12/23] OMAPDSS: DSI: Pass outputs from panel driver to DSI interface driver
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 11/23] OMAPDSS: DSI: Remove dsi_pdev_map global struct
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 10/23] OMAPDSS: DPI: Pass outputs from panel driver to DPI interface driver
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 09/23] OMAPDSS: Create links between managers, outputs and devices
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 08/23] OMAPDRM: Remove manager->device references
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 07/23] OMAPFB: remove manager->device references
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 05/23] OMAPDSS: Remove manager->device references
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 06/23] OMAP_VOUT: Remove manager->device references
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 04/23] OMAPDSS: APPLY: Add manager set/unset output ops for omap_overlay_manager
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 01/23] OMAPDSS: outputs: Create a new entity called outputs
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 02/23] OMAPDSS: outputs: Create and initialize output instances
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 03/23] OMAPDSS: output: Add set/unset device ops for omap_dss_output
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 00/23] OMAPDSS: Create output entities
- From: Archit Taneja <archit@xxxxxx>
- RE: [PATCH v3] da8xx-fb: allow frame to complete after disabling LCDC
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- Re: [RFC 0/5] Generic panel framework
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC 0/5] Generic panel framework
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH] video: hpfb: Fix error handling
- From: Emil Goode <emilgoode@xxxxxxxxx>
- [PATCH 5/7] tgafb: fix mode setting with fbset
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/7] framebuffer: fix cfb_copyarea
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 3/7] mach64: fix unaligned access on sparc64
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/7] aty: remove mode restriction
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 0/7] framebuffer fixes
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 4/7] mach64: fix cursor when character width is not a multiple of 8 pixels
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 7/7] tgafb: avoid restriction on modes with line length not a multiple of 64
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 6/7] tgafb: fix data copying
- From: Mikulas Patocka <mikulas@xxxxxxxxxxxxxxxxxxxxxxxx>
- Re: i.MX27 SLCDC driver
- From: Gaëtan Carlier <gcembed@xxxxxxxxx>
- Re: i.MX27 SLCDC driver
- From: Matt Sealey <matt@xxxxxxxxxxxxxx>
- [PATCH V5 6/6] OMAPDSS: DPI: Remove cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V5 5/6] ARM: OMAP: Disable venc for OMAP4
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V5 4/6] OMAPDSS: VENC: Remove cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V5 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V5 2/6] OMAPDSS: DSS: Remove redundant functions
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V5 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V5 0/6] OMAPDSS: Cleanup cpu_is checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- Re: [RFC 0/5] Generic panel framework
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH V4 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH V4 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
- Re: [PATCH 03/10] video: exynos_dp: Clean up SW link training
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 10/10] video: exynos_dp: Enable hotplug interrupts
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 09/10] video: exynos_dp: Fix bug when checking dp->irq
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 07/10] video: exynos_dp: Improve EDID error handling
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 06/10] video: exynos_dp: Fix get_pll_lock_status return value
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 05/10] video: exynos_dp: Remove sink control to D0
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- RE: [PATCH 04/10] video: exynos_dp: Get pll lock before pattern set
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 02/10] video: exynos_dp: Check DPCD return codes
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 01/10] video: exynos_dp: Change aux transaction failures
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH V4 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/6] HID: picoLCD: rework hid-fbdev interaction
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- [PATCH 0/6] HID: picoLCD additional fixes + CIR support
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 6/7 v2] HID: picoLCD: drop version check during probe
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- [PATCH 8/14] drivers/video/sunxvr2500.c: fix error return code
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: [patch] video: mb862xxfb: prevent divide by zero bug
- From: Anatolij Gustschin <agust@xxxxxxx>
- [patch] video: mb862xxfb: prevent divide by zero bug
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- viafb PLL/clock tweaking causes XO-1.5 instability
- From: Daniel Drake <dsd@xxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- [PATCH] fbdev/amifb: Remove write-only variable amifb_inverse
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: [UDL] general protection fault in fb_deferred_io_mkwrite()
- From: Thomas Meyer <thomas@xxxxxxxx>
- Re: [RFC 0/5] Generic panel framework
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH] fbdev: Make the switch from generic to native driver less alarming
- From: Adam Jackson <ajax@xxxxxxxxxx>
- Re: [RFC 3/5] video: panel: Add MIPI DBI bus support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH V4 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC 3/5] video: panel: Add MIPI DBI bus support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 2/3] OMAPDSS: APPLY: Remove omap_dss_device references in wait_for_go functions
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC 3/5] video: panel: Add MIPI DBI bus support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC 0/5] Generic panel framework
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC 0/5] Generic panel framework
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC 3/5] video: panel: Add MIPI DBI bus support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 3/3] OMAPDSS: Remove unnecessary acb/acbi pin fields from omap_dss_device
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 2/3] OMAPDSS: APPLY: Remove omap_dss_device references in wait_for_go functions
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 1/3] OMAPDSS: DSI: Pass dsi platform device wherever possible
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 0/3] OMAPDSS: Miscellaneous cleanup patches
- From: Archit Taneja <archit@xxxxxx>
- Re: [RFC 3/5] video: panel: Add MIPI DBI bus support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC 3/5] video: panel: Add MIPI DBI bus support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH v4 0/3] Runtime Interpreted Power Sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [RFC 0/5] Generic panel framework
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- i.MX27 SLCDC driver
- From: Gaëtan Carlier <gcembed@xxxxxxxxx>
- Re: [PATCH v3] da8xx-fb: allow frame to complete after disabling LCDC
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [RFC 0/5] Generic panel framework
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [RFC 5/5] video: panel: Add R61517 panel support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [RFC 3/5] video: panel: Add MIPI DBI bus support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [RFC 1/5] video: Add generic display panel core
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [RFC 4/5] video: panel: Add R61505 panel support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [RFC 2/5] video: panel: Add dummy panel support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [RFC 0/5] Generic panel framework
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/3] Runtime Interpreted Power Sequences
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Mitch Bradley <wmb@xxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 3/3] tegra: add pwm backlight device tree nodes
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] pwm_backlight: use power sequences
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 6/6] OMAPDSS: VENC: Maintian copy of video output polarity in private data
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 05/19] fbdev: sh_mipi_dsi: Add channel field to platform data
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 04/19] ARM: mach-shmobile: ag5evm: Add LCDC tx_dev field to platform data
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 03/19] fbdev: sh_mobile_lcdc: Remove priv argument from channel and overlay init
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 06/19] ARM: mach-shmobile: Initiliaze the new sh_mipi_dsi_info channel field
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 07/19] fbdev: sh_mipi_dsi: Use the sh_mipi_dsi_info channel field
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 02/19] fbdev: sh_mobile_lcdc: Rename mode argument to modes
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 11/19] fbdev: sh_mipi_dsi: Remove the unused sh_mipi_dsi_info lcd_chan field
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 12/19] fbdev: sh_mobile_lcdc: Store the backlight brightness internally
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 15/19] sh: ecovec24: Remove unused get_brightness LCDC callback
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 14/19] sh: ap325rxa: Remove unused get_brightness LCDC callback
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 08/19] fbdev: sh_mipi_dsi: Use the LCDC entity default mode
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 19/19] fbdev: sh_mobile_lcdc: Make sh_mobile_lcdc_sys_bus_ops static
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 18/19] sh: kfr2r09: Use the backlight API for brightness control
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 17/19] ARM: mach-shmobile: ag5evm: Use the backlight API for brightness control
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 16/19] fbdev: sh_mobile_lcdc: Remove unused get_brightness pdata callback
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 13/19] ARM: mach-shmobile: mackerel: Removed unused get_brightness callback
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 10/19] ARM: mach-shmobile: Remove the unused sh_mipi_dsi_info lcd_chan field
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 09/19] fbdev: sh_mipi_dsi: Remove last reference to LCDC platform data
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 00/19] SH Mobile LCDC panel cleanup (including board code)
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 01/19] fbdev: sh_mobile_lcdc: Get display dimensions from the channel structure
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 6/6] OMAPDSS: VENC: Maintian copy of video output polarity in private data
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DSI: Maintain copy of operation mode in driver data
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH v4] fbdev: sh_mobile_lcdc: use dma_mmap_coherent
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/6] OMAPDSS: DSI: Maintain copy of video mode timings in driver data
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DSI: Maintain copy of operation mode in driver data
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [PATCH 3/6] OMAPDSS: DSI: Maintain copy of video mode timings in driver data
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [PATCH 6/6] OMAPDSS: VENC: Maintian copy of video output polarity in private data
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 3/6] OMAPDSS: DSI: Maintain copy of video mode timings in driver data
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH V4 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V4 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DSI: Maintain copy of operation mode in driver data
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- RE: [PATCH v3 3/4] media: videobuf2-dma-contig: use dma_mmap_coherent if available
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- [PATCH v4] fbdev: sh_mobile_lcdc: use dma_mmap_coherent
- From: Hideki EIRAKU <hdk@xxxxxxxxxx>
- Re: [PATCH v3 3/4] media: videobuf2-dma-contig: use dma_mmap_coherent if available
- From: Hideki EIRAKU <hdk@xxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- [PATCH 6/6] OMAPDSS: VENC: Maintian copy of video output polarity in private data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 5/6] OMAPDSS: VENC: Maintain copy of venc type in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 4/6] OMAPDSS: RFBI: Maitain copy of rfbi timings in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 3/6] OMAPDSS: DSI: Maintain copy of video mode timings in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 2/6] OMAPDSS: DSI: Rename dsi_videomode_data to dsi_videomode_timings
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 1/6] OMAPDSS: DSI: Maintain copy of operation mode in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 0/6] OMAPDSS: Pass output specific parameters from panel driver to output
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v4 2/3] pwm_backlight: use power sequences
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH v4 3/3] tegra: add pwm backlight device tree nodes
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- [PATCH v4 0/3] Runtime Interpreted Power Sequences
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- [PATCH] video:uvesafb: reduce the double check
- From: Wang YanQing <udknight@xxxxxxxxx>
- Re: [PATCH 0/5] Pass data lines and pixel format info from panel driver to interface
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 6/7] HID: picoLCD: disable version check during probe
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 05/11] fblog: register one fblog object per framebuffer
- From: Ryan Mallon <rmallon@xxxxxxxxx>
- Re: [PATCH] video/mx3fb: remove stray l from debug output
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings
- From: Archit Taneja <archit@xxxxxx>
- Re: [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH v2 07/13] OMAPDSS: HDMI: Add a get_timing function for HDMI interface
- From: Archit Taneja <archit@xxxxxx>
- Re: [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings
- From: Archit Taneja <archit@xxxxxx>
- Re: [PATCH 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH v2 07/13] OMAPDSS: HDMI: Add a get_timing function for HDMI interface
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH v3] da8xx-fb: allow frame to complete after disabling LCDC
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- [PATCH v5] da8xx-fb: add 24bpp LCD configuration support
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- Re: [PATCH v2 07/13] OMAPDSS: HDMI: Add a get_timing function for HDMI interface
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [PATCH v2 07/13] OMAPDSS: HDMI: Add a get_timing function for HDMI interface
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
- Re: [PATCH 07/11] fblog: allow selecting fbs via sysfs and module-parameters
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- Re: [PATCH 06/11] fblog: open fb on registration
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- Re: [PATCH 05/11] fblog: register one fblog object per framebuffer
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 03/11] fblog: new framebuffer kernel log dummy driver
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH RESEND] video/udlfb: fix line counting in fb_write
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- RE: [PATCH v3] video: da8xx-fb: add 24bpp LCD configuration support
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] video: exynos-mipi-dsi: Add missing static storage class specifiers
- From: Donghwa Lee <dh09.lee@xxxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: 转发: Siliconmotion new kernel driver initial patch
- From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
- Re: [PATCH] video/mx3fb: remove stray l from debug output
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- re: s3fb: fix up DDC build with MTRR disabled.
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH] video:uvesafb: check the return value of kzalloc
- From: Wang YanQing <udknight@xxxxxxxxx>
- [PATCH 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH] video/mx3fb: remove stray l from debug output
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- RE: [PATCH] video: move CNVT_TOHW to a common place
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- RE: [PATCH v4] da8xx-fb: add 24bpp LCD configuration support
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- Re: [PATCH 07/11] fblog: allow selecting fbs via sysfs and module-parameters
- From: Ryan Mallon <rmallon@xxxxxxxxx>
- Re: [PATCH 06/11] fblog: open fb on registration
- From: Ryan Mallon <rmallon@xxxxxxxxx>
- Re: [PATCH 05/11] fblog: register one fblog object per framebuffer
- From: Ryan Mallon <rmallon@xxxxxxxxx>
- Re: [PATCH 03/11] fblog: new framebuffer kernel log dummy driver
- From: Ryan Mallon <rmallon@xxxxxxxxx>
- [PATCH] drivers: console: font_: Change a glyph from "broken bar" to "vertical line"
- From: Bjarni Ingi Gislason <bjarniig@xxxxxxxxx>
- Re: [PATCH 00/11] fblog: Framebuffer kernel log driver v4
- From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
- [PATCH 00/11] fblog: Framebuffer kernel log driver v4
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH 05/11] fblog: register one fblog object per framebuffer
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH 03/11] fblog: new framebuffer kernel log dummy driver
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH 04/11] fbdev: export get_fb_info()/put_fb_info()
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH 02/11] fbcon: move bit_putcs() into separate source file
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH 06/11] fblog: open fb on registration
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH 01/11] fbcon: move update_attr() into separate source file
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH 08/11] fblog: cache framebuffer BLANK and SUSPEND states
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH 07/11] fblog: allow selecting fbs via sysfs and module-parameters
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH 11/11] MAINTAINERS: add fblog entry
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH 10/11] fblog: draw console to framebuffers
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [PATCH 09/11] fblog: register console driver
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- [UDL] general protection fault in fb_deferred_io_mkwrite()
- From: Thomas Meyer <thomas@xxxxxxxx>
- [PATCH 5/5] OMAPDSS: SDI: Maintain copy of data pairs in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 4/5] OMAPDSS: DPI: Maitain copy of number of data lines in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 3/5] OMAPDSS: RFBI: Maintain copy of number of data lines in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 2/5] OMAPDSS: RFBI: Maintain copy of pixel size in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 1/5] OMAPDSS: DSI: Maintain copy of pixel format in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH 0/5] Pass data lines and pixel format info from panel driver to interface
- From: Archit Taneja <archit@xxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/5] drivers/video/msm/mddi_client_dummy.c: use devm_ functions
- From: David Brown <davidb@xxxxxxxxxxxxxx>
- Re: [PATCH 4/5] drivers/video/msm/mddi_client_dummy.c: use devm_ functions
- From: David Brown <davidb@xxxxxxxxxxxxxx>
- Re: [PATCH 5/5] drivers/video/msm/mddi_client_nt35399.c: use devm_ functions
- From: David Brown <davidb@xxxxxxxxxxxxxx>
- [PATCH v2 13/13] OMAPDSS: VENC: Add a get_timing function for VENC interface
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 12/13] OMAPDSS: VENC: Maintain our own timings field in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 11/13] OMAPDSS: VENC: Split VENC into interface and panel driver
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 10/13] OMAPDSS: SDI: Maintain our own timings field in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 08/13] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 07/13] OMAPDSS: HDMI: Add a get_timing function for HDMI interface
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 06/13] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 05/13] OMAPDSS: DSI: Update manager timings on a manual update
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 04/13] OMAPDSS: DSI: Add function to set panel size for command mode panels
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 03/13] OMAPDSS: DSI: Maintain own copy of timings in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 02/13] OMAPDSS: DPI displays: Take care of panel timings in the driver itself
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 01/13] OMAPDSS: DPI: Maintain our own timings field in driver data
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 00/13] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Archit Taneja <archit@xxxxxx>
- Re: [PATCH 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
- [PATCH v2 0/5] OMAPDSS: Misc Cleanups/Fixes
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 1/5] OMAPDSS: APPLY: Constify timings argument in dss_mgr_set_timings
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 4/5] OMAPDSS: DPI: Add locking for DPI interface
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 5/5] OMAPDSS: Displays: Add locking in generic DPI panel driver
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 3/5] OMAPDSS: HDMI: Remove omap_dss_device argument from hdmi_compute_pll
- From: Archit Taneja <archit@xxxxxx>
- [PATCH v2 2/5] OMAPDSS: DPI: Remove omap_dss_device arguments in dpi_set_dsi_clk/dpi_set_dispc_clk
- From: Archit Taneja <archit@xxxxxx>
- [PATCHv2 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv2 3/8] serial: vt8500: Add devicetree support for vt8500-serial
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv2 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv2 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv2 4/8] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv2 8/8] arm: vt8500: gpio: Devicetree support for arch-vt8500
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv2 7/8] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCHv2 2/8] rtc: vt8500: Add devicetree support for vt8500-rtc
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] video: move CNVT_TOHW to a common place
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v4] da8xx-fb: add 24bpp LCD configuration support
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH v4] da8xx-fb: add 24bpp LCD configuration support
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- Re: [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
- Re: [PATCH v2] of: Add videomode helper
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2] of: Add videomode helper
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH] fbdev: Add Renesas vdc4 framebuffer driver
- From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
- [PATCH] video: move CNVT_TOHW to a common place
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- [PATCH 3/6] OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH 1/6] OMAPDSS: DISPC: cleanup cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- Re: [PATCH 1/2] ARM: pgtable: add pgprot_writethrough() macro
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- Re: [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- RE: [PATCH V4 0/2] arm: samsung: Move FIMD headers to include/video/
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- Re: [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [RFC 13/17] OMAPDSS: SDI: Create a function to set timings
- From: Archit Taneja <a0393947@xxxxxx>
- Re: [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data
- From: Archit Taneja <a0393947@xxxxxx>
- [PATCH 10/10] video: exynos_dp: Enable hotplug interrupts
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- [PATCH 09/10] video: exynos_dp: Fix bug when checking dp->irq
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- [PATCH 08/10] video: exynos_dp: Move hotplug into a workqueue
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- [PATCH 07/10] video: exynos_dp: Improve EDID error handling
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- [PATCH 06/10] video: exynos_dp: Fix get_pll_lock_status return value
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- [PATCH 05/10] video: exynos_dp: Remove sink control to D0
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- [PATCH 04/10] video: exynos_dp: Get pll lock before pattern set
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- [PATCH 03/10] video: exynos_dp: Clean up SW link training
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- [PATCH 02/10] video: exynos_dp: Check DPCD return codes
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- [PATCH 01/10] video: exynos_dp: Change aux transaction failures
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- [PATCH 00/10] Upstream patches from chromium os tree
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- [PATCH 7/8] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCH 3/8] serial: vt8500: Add devicetree support for vt8500-serial
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCH 0/8] *** ARM: Update arch-vt8500 to Devicetree ***
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCH 4/8] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCH 2/8] rtc: vt8500: Add devicetree support for vt8500-rtc
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
- From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
- [PATCH] video: exynos_dp: check time loop for RPLY_RECEIV
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH V4 1/2] include/video: move fimd register headers from platform to include/video
- From: Arnd Bergmann <arnd@xxxxxxxx>
- RE: [PATCH v3 1/4] ARM: dma-mapping: define ARCH_HAS_DMA_MMAP_COHERENT
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH V4 0/2] arm: samsung: Move FIMD headers to include/video/
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- RE: [PATCH v3 3/4] media: videobuf2-dma-contig: use dma_mmap_coherent if available
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH V4 0/2] arm: samsung: Move FIMD headers to include/video/
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH V4 1/2] include/video: move fimd register headers from platform to include/video
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 13/17] OMAPDSS: SDI: Create a function to set timings
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 3/6] OMAPDSS: DSS: Remove cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 4/6] OMAPDSS: VENC: Remove cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH V4 2/2] include/video: Add register offsets for FIMD version 8
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V4 1/2] include/video: move fimd register headers from platform to include/video
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V4 0/2] arm: samsung: Move FIMD headers to include/video/
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- Re: [PATCH v3 4/4] fbdev: sh_mobile_lcdc: use dma_mmap_coherent if available
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH V4 0/2] arm: samsung: Move FIMD headers to include/video/
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- Re: [PATCH v3 4/4] fbdev: sh_mobile_lcdc: use dma_mmap_coherent if available
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH V3 5/5] arm: samsung: delete frame buffer header files from platform
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V3 4/5] driver: Include the modified FIMD header file
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V3 3/5] arm: samsung: Include the modified FIMD header file
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V3 2/5] include/video: Add Exynos5 specific FIMD register offsets
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V3 0/5] arm: samsung: Move FIMD headers to include/video/
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V3 1/5] include/video: Add samsung FIMD register header
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 4/6] OMAPDSS: VENC: Remove cpu_is_xxxx checks
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 3/6] OMAPDSS: DSS: Remove cpu_is_xxxx checks
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 6/6] OMAPDSS: DPI: Remove cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH 5/6] ARM: OMAP: Disable venc for OMAP4
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH 4/6] OMAPDSS: VENC: Remove cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH 3/6] OMAPDSS: DSS: Remove cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH 2/6] OMAPDSS: DSS: Remove redundant functions
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH 1/6] OMAPDSS: DISPC: Remove cpu_is_xxxx checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- [PATCH 0/6] OMAPDSS: Remove cpu_is checks
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH] fbdev: sh_mobile_lcdc: Fix vertical panning step
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- RE: [PATCH] video: s3c-fb: Fix compile error/warning if CONFIG_OF is not selected
- From: Dongjin Kim <Dongjin.Kim@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] video: s3c-fb: Fix compile error/warning if CONFIG_OF is not selected
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH] fbdev: sh_mobile_lcdc: Fix vertical panning step
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] video: s3c-fb: Fix compile error/warning if CONFIG_OF is not selected
- From: Dongjin Kim <tobetter@xxxxxxxxx>
- Re: [PATCH] OMAPDSS: OMAPFB: fix framebuffer console colors
- From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
- Re: [PATCH] OMAPDSS: OMAPFB: fix framebuffer console colors
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH] OMAPDSS: OMAPFB: fix framebuffer console colors
- From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
- [PATCH v3 2/4] ALSA: pcm - Don't define ARCH_HAS_DMA_MMAP_COHERENT privately for ARM
- From: Hideki EIRAKU <hdk@xxxxxxxxxx>
- [PATCH v3 3/4] media: videobuf2-dma-contig: use dma_mmap_coherent if available
- From: Hideki EIRAKU <hdk@xxxxxxxxxx>
- [PATCH v3 4/4] fbdev: sh_mobile_lcdc: use dma_mmap_coherent if available
- From: Hideki EIRAKU <hdk@xxxxxxxxxx>
- [PATCH v3 1/4] ARM: dma-mapping: define ARCH_HAS_DMA_MMAP_COHERENT
- From: Hideki EIRAKU <hdk@xxxxxxxxxx>
- [PATCH v3 0/4] Use dma_mmap_coherent to support IOMMU mapper
- From: Hideki EIRAKU <hdk@xxxxxxxxxx>
- Re: [PATCH 5/5] drivers/video/msm/mddi_client_nt35399.c: use devm_ functions
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: Gethering power management/policy hw drivers under drivers/power/? (Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences)
- From: "Pihet-XID, Jean" <j-pihet@xxxxxx>
- Re: [PATCH] OMAPDSS: OMAPFB: fix framebuffer console colors
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH 5/6] drivers/video/backlight/da9052_bl.c: drop devm_kfree of devm_kzalloc'd data
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 5/6] drivers/video/backlight/da9052_bl.c: drop devm_kfree of devm_kzalloc'd data
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- [PATCH] OMAPDSS: OMAPFB: fix framebuffer console colors
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/3] drivers/video/auo_k190x.c: drop kfree of devm_kzalloc's data
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- Re: [PATCH v2] of: Add videomode helper
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 4/5] drivers/video/msm/mddi_client_dummy.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 5/5] drivers/video/msm/mddi_client_nt35399.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 3/5] drivers/video/jz4740_fb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 0/5] use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 2/5] drivers/video/bf54x-lq043fb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 1/5] drivers/video/epson1355fb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- Re: [PATCH v2] of: Add videomode helper
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: viafb on Clevo M5x0V laptop (+VT1631L)
- From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
- Re: viafb on Clevo M5x0V laptop (+VT1631L)
- From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
- Re: [PATCH v2] of: Add videomode helper
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2] of: Add videomode helper
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- viafb on Clevo M5x0V laptop (+VT1631L)
- From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH 21/29] OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setup
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- Re: [RFC PATCH 22/29] OMAPDSS: DISPC: Setup writeback go, enable and channel_in functions
- From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- [PATCH] video: s3c-fb: use devm_clk_get()
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH] video: exynos-mipi-dsi: Add missing static storage class specifiers
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH v2] video: exynos_dp: use devm_clk_get function
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 5/5] drivers/video/exynos/exynos_dp_core.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [GIT PULL] fbdev updates for 3.6
- From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
- Re: [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Archit Taneja <a0393947@xxxxxx>
- [RFC 17/17] OMAPDSS: VENC: Add a get_timing function for VENC interface
- From: Archit Taneja <archit@xxxxxx>
- [RFC 16/17] OMAPDSS: VENC: Maintain our own timings field in driver data
- From: Archit Taneja <archit@xxxxxx>
- [RFC 15/17] OMAPDSS: VENC: Split VENC into interface and panel driver
- From: Archit Taneja <archit@xxxxxx>
- [RFC 14/17] OMAPDSS: SDI: Maintain our own timings field in driver data
- From: Archit Taneja <archit@xxxxxx>
- [RFC 13/17] OMAPDSS: SDI: Create a function to set timings
- From: Archit Taneja <archit@xxxxxx>
- [RFC 12/17] OMAPDSS: SDI: Create a separate function for timing/clock configurations
- From: Archit Taneja <archit@xxxxxx>
- [RFC 11/17] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions
- From: Archit Taneja <archit@xxxxxx>
- [RFC 10/17] OMAPDSS: HDMI: Add a get_timing function for HDMI interface
- From: Archit Taneja <archit@xxxxxx>
- [RFC 09/17] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings
- From: Archit Taneja <archit@xxxxxx>
- [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data
- From: Archit Taneja <archit@xxxxxx>
- [RFC 07/17] OMAPDSS: Displays: Add locking in generic DPI panel driver
- From: Archit Taneja <archit@xxxxxx>
- [RFC 06/17] OMAPDSS: DPI displays: Take care of panel timings in the driver itself
- From: Archit Taneja <archit@xxxxxx>
- [RFC 05/17] OMAPDSS: DPI: Maintain our own timings field in driver data
- From: Archit Taneja <archit@xxxxxx>
- [RFC 04/17] OMAPDSS: DPI: Add locking for DPI interface
- From: Archit Taneja <archit@xxxxxx>
- [RFC 03/17] OMAPDSS: HDMI: Remove omap_dss_device argument from hdmi_compute_pll
- From: Archit Taneja <archit@xxxxxx>
- [RFC 02/17] OMAPDSS: DPI: Remove omap_dss_device arguments in dpi_set_dsi_clk/dpi_set_dispc_clk
- From: Archit Taneja <archit@xxxxxx>
- [RFC 01/17] OMAPDSS: APPLY: Constify timings argument in dss_mgr_set_timings
- From: Archit Taneja <archit@xxxxxx>
- [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface
- From: Archit Taneja <archit@xxxxxx>
- Re: [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- RE: [PATCH V2 5/5] arm: samsung: delete frame buffer header files from platform
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- RE: [PATCH V2 0/5] arm: samsung: Move FIMD headers to include/video/
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- Re: [PATCH V2 5/5] arm: samsung: delete frame buffer header files from platform
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- Re: [PATCH V2 0/5] arm: samsung: Move FIMD headers to include/video/
- From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
- Re: [PATCH] Fix newport con crashes
- From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
- Re: [PATCH 2/4] ARM: dts: mxs: Add alternative I2C muxing options for imx28
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- RE: [PATCH V2 5/5] arm: samsung: delete frame buffer header files from platform
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- RE: [PATCH 5/5] drivers/video/exynos/exynos_dp_core.c: use devm_ functions
- From: Julia Lawall <julia.lawall@xxxxxxx>
- RE: [PATCH 5/5] drivers/video/exynos/exynos_dp_core.c: use devm_ functions
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- RE: [PATCH 5/5] drivers/video/exynos/exynos_dp_core.c: use devm_ functions
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 5/5] drivers/video/exynos/exynos_dp_core.c: use devm_ functions
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [PATCH 5/5] drivers/video/exynos/exynos_dp_core.c: use devm_ functions
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 5/5] drivers/video/exynos/exynos_dp_core.c: use devm_ functions
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [PATCH V2 5/5] arm: samsung: delete frame buffer header files from platform
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- RE: [PATCH V2 0/5] arm: samsung: Move FIMD headers to include/video/
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- RE: [PATCH V2 4/5] driver: Include the modified FIMD header file
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- RE: [PATCH V2 3/5] arm: samsung: Include the modified FIMD header file
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mitch Bradley <wmb@xxxxxxxxxxxxx>
- RE: [PATCH V2 2/5] include/video: Add Exynos5 specific FIMD register offsets
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- RE: [PATCH V2 1/5] include/video: Add samsung FIMD register header
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- RE: [PATCH V2 5/5] arm: samsung: delete frame buffer header files from platform
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- RE: [PATCH 1/3] Move FIMD register headers to include/video/
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- RE: [PATCH 1/3] Move FIMD register headers to include/video/
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- RE: [PATCH V2 2/5] include/video: Add Exynos5 specific FIMD register offsets
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- RE: [PATCH 1/3] Move FIMD register headers to include/video/
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH V2 3/5] arm: samsung: Include the modified FIMD header file
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH V2 4/5] driver: Include the modified FIMD header file
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: Gethering power management/policy hw drivers under drivers/power/? (Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences)
- From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
- Re: [PATCH 5/5] drivers/video/exynos/exynos_dp_core.c: use devm_ functions
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH] OMAPDSS: Do not require a VDDS_DSI regulator on am35xx
- From: Raphaël Assénat <raph@xxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 3/5] drivers/video/mbx/mbxfb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 2/5] drivers/video/gbefb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 4/5] drivers/video/exynos/exynos_mipi_dsi.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 1/5] drivers/video/fsl-diu-fb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 5/5] drivers/video/exynos/exynos_dp_core.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 0/5] use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] drivers/video/bfin-t350mcqb-fb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxxxx>
- Re: [PATCH 4/5] drivers/video/da8xx-fb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxxxx>
- Re: [PATCH 4/5] drivers/video/da8xx-fb.c: use devm_ functions
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] drivers/video/bfin-t350mcqb-fb.c: use devm_ functions
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- [PATCH 0/5] use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 2/5] drivers/video/bfin-t350mcqb-fb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 3/5] drivers/video/cobalt_lcdfb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 4/5] drivers/video/da8xx-fb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 1/5] drivers/video/bf537-lq035.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- [PATCH 5/5] drivers/video/ep93xx-fb.c: use devm_ functions
- From: Damien Cassou <damien.cassou@xxxxxxx>
- Re: [PATCH V2 2/5] include/video: Add Exynos5 specific FIMD register offsets
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mitch Bradley <wmb@xxxxxxxxxxxxx>
- Re: [PATCH V2 2/5] include/video: Add Exynos5 specific FIMD register offsets
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Mitch Bradley <wmb@xxxxxxxxxxxxx>
- [PATCH V2 5/5] arm: samsung: delete frame buffer header files from platform
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V2 4/5] driver: Include the modified FIMD header file
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V2 3/5] arm: samsung: Include the modified FIMD header file
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V2 2/5] include/video: Add Exynos5 specific FIMD register offsets
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V2 1/5] include/video: Add samsung FIMD register header
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- [PATCH V2 0/5] arm: samsung: Move FIMD headers to include/video/
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- Re: [PATCH 2/4] ARM: dts: mxs: Add alternative I2C muxing options for imx28
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/4] ARM: dts: mxs: Add alternative I2C muxing options for imx28
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 4/4] ARM: dts: mxs: add oled support for the cfa-10036
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 3/4] ARM: dts: mxs: Add pwm4 muxing options for imx28
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCHv2 0/4] Add support for the OLED in the CFA10036
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- RE: [PATCH] video: da8xx-fb: do clock reset of revision 2 LCDC before enabling
- From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAPDSS: DISPC: Use msleep instead of blocking mdelay
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH] OMAPDSS: Do not require a VDDS_DSI regulator on am35xx
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Alex Courbot <acourbot@xxxxxxxxxx>
- RE: [PATCH 1/3] Move FIMD register headers to include/video/
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH 1/3] Move FIMD register headers to include/video/
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 1/3] Move FIMD register headers to include/video/
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/7] HID: picoLCD updates
- From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] Move FIMD register headers to include/video/
- From: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
- Re: [PATCH 1/3] Move FIMD register headers to include/video/
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- RE: [PATCH 1/3] Move FIMD register headers to include/video/
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- RE: [PATCH 1/3] Move FIMD register headers to include/video/
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]