On Wed, Aug 01, 2012 at 12:28:27PM +0200, Maxime Ripard wrote:
> Thanks for the tip.
> However, I'm not sure this device will be mxs specific, since this
> controller is used on some other devices as well (I know for example
> that some uses it with the Arduino, even though it's not related to
> Linux), so relying on mxs-specific capabilities here might not be that
> great.
>
Ok, agreed. In that case, putting "1" in last cell of oled-reset-gpio
does not make any point then.
+Examples:
+ssd1307: oled@3c {
+ compatible = "solomon,ssd1307fb-i2c";
+ reg = <0x3c>;
+ pwms = <&pwm 4 3000>;
+ oled-reset-gpio = <&gpio2 7 1>;
+ oled-reset-active-low;
+};
--
Regards,
Shawn
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
