On Wednesday 08 August 2012 01:43 PM, Tomi Valkeinen wrote:
On Wed, 2012-08-08 at 13:29 +0530, Archit Taneja wrote:
Okay, one thing which I want to align on is that most of these functions
don't really do the actual configurations. That is, they'll just update
the private data, and the actual configuration will only happen on enable.
We would want set_timings() op to have a direct impact. But we wouldn't
want the same for setting the data lines, that could be clubbed with
other configurations at enable. That's okay, right?
I'm not sure we want/need set_timings to have direct impact. Changing
the timings on the fly has some problems, like the output size changing
to smaller than the overlays, and we perhaps may need to adjust the
clock dividers (dispc's, DSI PLL's or PRCM's).
It feels just much easier and safer to require that the mgr is disabled
when these changes are made. And as far as I can see, there shouldn't be
any need to change the timings via the shadow registers, as quickly as
possible and during vblank...
That makes sense. But currently set_timings for DPI has a direct impact.
HDMI/VENC/SDI take the easier route of disabling and enabling the interface.
I agree it's safer and easier to make sure things are disabled first,
but maybe it's good to have the capability set hdmi timings on the fly
in the future, it would make the switch faster, same goes for reading edid.
What I meant to ask was whether we should do the same for something like
dpi_set_data_lines(), that is, disable dpi, update the data_lines
private data with a new value, and enable dpi again.
This makes me also think that if the output related settings can only be
changed when the output is off, the apply mechanism is not really needed
at all for these. Not that it causes any harm, but just a point I
realized.
Hmm, unfortunately you are right. It's still good to have all the DISPC
writes only in APPLY though, and it gives us the option to do some
operation on the fly if needed in the future.
Archit
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
