Linux Frame Buffer Development

• Thread Index

• Re: [PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 3/6] devicetree: mfd: Add new SKY81452 mfd binding
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 5/6] devicetree: Add vendor prefix for Skyworks Solutions, Inc.
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 6/6] devicetree: i2c: Add SKY81452 to the Trivial Devices list
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 1/6] mfd: Add support for Skyworks SKY81452 driver
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 0/6] Add Skyworks SKY81452 device drivers
  • From: gyungoh@xxxxxxxxx
• Re: [patch] OMAPDSS: pll: NULL dereference in error handling
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [patch] OMAPDSS: pll: NULL dereference in error handling
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• CONFIG_CC_OPTIMIZE_FOR_SIZE breaking tridentfb
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] fbdev fixes for 3.19
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [GIT PULL] fbdev fixes for 3.19
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: Compiled tridentfb hangs but distribution kernel works fine
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] fbdev fixes for 3.19
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [GIT PULL] fbdev fixes for 3.19
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: FOSDEM15: Graphics DevRoom: call for speakers.
  • From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
• [GIT PULL] fbdev fixes for 3.19
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] fbdev: vgastate: remove trailing whitespaces
  • From: Asaf Vertz <asaf.vertz@xxxxxxxxxxx>
• Re: Compiled tridentfb hangs but distribution kernel works fine
  • From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
• Compiled tridentfb hangs but distribution kernel works fine
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: FOSDEM15: Graphics DevRoom: call for speakers.
  • From: Luc Verhaegen <libv@xxxxxxxxx>
• using fb1
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH v2 1/4] backlight/lp855x: Remove stale code from lp855x.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• Re: [PATCH v2 4/4] backlight/lp855x: Remove CONFIG_OF ifdef in favor of Kconfig depends
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] backlight/lp855x: Merge lp855x_platform_data with lp855x
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] backlight/lp855x: Remove platform_data header
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] backlight/lp855x: Remove stale code from lp855x.h
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH v2 4/4] backlight/lp855x: Remove CONFIG_OF ifdef in favor of Kconfig depends
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• [PATCH v2 3/4] backlight/lp855x: Merge lp855x_platform_data with lp855x
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• [PATCH v2 2/4] backlight/lp855x: Remove platform_data header
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• [PATCH v2 1/4] backlight/lp855x: Remove stale code from lp855x.h
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• Re: [PATCH 3/4] backlight/lp855x: Merge lp855x_platform_data with lp855x
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 3/4] backlight/lp855x: Merge lp855x_platform_data with lp855x
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 2/4] backlight/lp855x: Remove platform_data header
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 1/4] backlight/lp855x: Remove stale code from lp855x.h
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH] video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH] video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 4/4] backlight/lp855x: Remove CONFIG_OF ifdef in favor of Kconfig depends
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH] video: ocfb: Fix data type warning
  • From: Stefan Kristiansson <stefan.kristiansson@xxxxxxxxxxxxx>
• [PATCH] video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• RE: [PATCH 3/3] video: fbdev: Validate mode timing against monspec
  • From: David Ung <davidu@xxxxxxxxxx>
• RE: [PATCH 2/3] video: fbdev: Check Standard Timing against DMT
  • From: David Ung <davidu@xxxxxxxxxx>
• [PATCH 4/4] backlight/lp855x: Remove CONFIG_OF ifdef in favor of Kconfig depends
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• [PATCH 2/4] backlight/lp855x: Remove platform_data header
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• [PATCH 3/4] backlight/lp855x: Merge lp855x_platform_data with lp855x
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• [PATCH 1/4] backlight/lp855x: Remove stale code from lp855x.h
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• Re: [PATCH 3/3] video: fbdev: Validate mode timing against monspec
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/3] video: fbdev: Check Standard Timing against DMT
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/3] video: fbdev: Check Standard Timing against DMT
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] video: ocfb: Fix data type warning
  • From: Qiang Chen <qiang2.chen@xxxxxxxxxxxxxx>
• RE: [PATCH 2/3] video: fbdev: Check Standard Timing against DMT
  • From: David Ung <davidu@xxxxxxxxxx>
• RE: [PATCH 1/3] video: fbdev: Add additional vesa modes
  • From: David Ung <davidu@xxxxxxxxxx>
• Re: [PATCH 2/3] video: fbdev: Check Standard Timing against DMT
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3] video: fbdev: Add additional vesa modes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] video: fbdev-LCDC: Deletion of an unnecessary check before the function call "vfree"
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] video: fbdev: vt8623fb: suppress build warning
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] video: fbdev: vt8623fb: suppress build warning
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCHv2 0/4] LS1021A: Add dcfb framebuffer driver support.
  • From: "Li.Xiubo@xxxxxxxxxxxxx" <Li.Xiubo@xxxxxxxxxxxxx>
• Re: [PATCHv2 0/4] LS1021A: Add dcfb framebuffer driver support.
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCHv2 0/4] LS1021A: Add dcfb framebuffer driver support.
  • From: "Li.Xiubo@xxxxxxxxxxxxx" <Li.Xiubo@xxxxxxxxxxxxx>
• Re: [PATCHv2 1/4] video: fsl-dcfb: Add dcfb framebuffer driver for LS1021A platform
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 0/4] LS1021A: Add dcfb framebuffer driver support.
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCHv2 0/4] LS1021A: Add dcfb framebuffer driver support.
  • From: "Li.Xiubo@xxxxxxxxxxxxx" <Li.Xiubo@xxxxxxxxxxxxx>
• Re: [PATCHv2 0/4] LS1021A: Add dcfb framebuffer driver support.
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] video: fbdev: vt8623fb: suppress build warning
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] video: fbdev: vt8623fb: suppress build warning
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH 1/3] video: fbdev: vt8623fb: suppress build warning
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver
  • From: Gyungoh Yoo <gyungoh@xxxxxxxxx>
• RE: [PATCHv2 0/4] LS1021A: Add dcfb framebuffer driver support.
  • From: "Li.Xiubo@xxxxxxxxxxxxx" <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCH 3/3] video: fbdev: Validate mode timing against monspec
  • From: David Ung <davidu@xxxxxxxxxx>
• [PATCH 2/3] video: fbdev: Check Standard Timing against DMT
  • From: David Ung <davidu@xxxxxxxxxx>
• [PATCH 1/3] video: fbdev: Add additional vesa modes
  • From: David Ung <davidu@xxxxxxxxxx>
• [PATCH v4 2/3] Documentation: DT: Add documentation for ti,opa362 bindings
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v4 3/3] arm: dts: omap3-gta04: Add handling for tv output
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v4 1/3] video: omapdss: Add opa362 driver
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v4 0/3] omapdss: Add video output support for gta04
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• RE: [PATCH] video: fbmon: Check Standard Timing against DMT and maxclk
  • From: David Ung <davidu@xxxxxxxxxx>
• Re: [PATCH 1/3] video: fbdev: vt8623fb: suppress build warning
  • From: Prabhakar Lad <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] video: fbmon: Check Standard Timing against DMT and maxclk
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 2/3] Documentation: DT: Add documentation for ti,opa362 bindings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 1/3] video: omapdss: Add opa362 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] Converting int usage to bool
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] video: fbdev: vt8623fb: suppress build warning
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/2] backlight/lp855x: Refactor dt parsing code
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCHv2 0/4] LS1021A: Add dcfb framebuffer driver support.
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCHv2 1/4] video: fsl-dcfb: Add dcfb framebuffer driver for LS1021A platform
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCHv2 4/4] ARM: ls1021a: dts: Add and enable dt node for dcfb.
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCHv2 2/4] video: fsl-dcfb: Add devicetree binding support
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCHv2 3/4] ARM: ls1021a: dtsi: Add dt node support for dcfb.
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCHv2 0/4] LS1021A: Add dcfb framebuffer driver support.
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• Re: [PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH v10 0/6] Add Skyworks SKY81452 device drivers
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 1/6] mfd: Add support for Skyworks SKY81452 driver
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 3/6] devicetree: mfd: Add new SKY81452 mfd binding
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 5/6] devicetree: Add vendor prefix for Skyworks Solutions, Inc.
  • From: gyungoh@xxxxxxxxx
• [PATCH v10 6/6] devicetree: i2c: Add SKY81452 to the Trivial Devices list
  • From: gyungoh@xxxxxxxxx
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Bryan Wu <cooloney@xxxxxxxxx>
• Re: [PATCH v2 1/2] backlight/lp855x: Refactor dt parsing code
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• Re: [PATCH v2 1/2] backlight/lp855x: Refactor dt parsing code
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• Re: [PATCH v2 1/2] backlight/lp855x: Refactor dt parsing code
  • From: Bryan Wu <cooloney@xxxxxxxxx>
• [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• [PATCH v2 1/2] backlight/lp855x: Refactor dt parsing code
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Bryan Wu <cooloney@xxxxxxxxx>
• RE: [PATCH] video: fbmon: Check Standard Timing against DMT and maxclk
  • From: David Ung <davidu@xxxxxxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• RE: [PATCH 1/4] video: fsl-dcfb: Add dcfb framebuffer driver for LS1021A platform
  • From: "Li.Xiubo@xxxxxxxxxxxxx" <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7.1 09/19] ASoC: omap-hdmi-audio: Add platform device for OMAP HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] backlight: pwm: don't call legacy pwm request for device defined in dt
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH 1/4] video: fsl-dcfb: Add dcfb framebuffer driver for LS1021A platform
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v7.1 09/19] ASoC: omap-hdmi-audio: Add platform device for OMAP HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• RE: [PATCH 0/4] LS1021A: Add dcfb framebuffer driver support.
  • From: "Li.Xiubo@xxxxxxxxxxxxx" <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCH v3 0/3] omapdss: Add video output support for gta04
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v3 1/3] video: omapdss: Add opa362 driver
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v3 3/3] arm: dts: omap3-gta04: Add handling for tv output
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v3 2/3] Documentation: DT: Add documentation for ti,opa362 bindings
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7.1 09/19] ASoC: omap-hdmi-audio: Add platform device for OMAP HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• Re: [PATCH 1/2] backlight/lp855x: Refactor dt parsing code
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• [PATCH] video: fbdev: sis: sis_main.c: converting relevant int to bool
  • From: Quentin Lambert <lambert.quentin@xxxxxxxxx>
• [PATCH] Converting int usage to bool
  • From: Quentin Lambert <lambert.quentin@xxxxxxxxx>
• Re: [PATCH 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• Re: [PATCH 1/2] backlight/lp855x: Refactor dt parsing code
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• [PATCH 3/3] video: fbdev: arkfb: suppress build warning
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• [PATCH 2/3] video: fbdev: s3fb: suppress build warning
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• [PATCH 1/3] video: fbdev: vt8623fb: suppress build warning
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• [PATCH 2/2] backlight/lp855x: Add supply regulator to lp855x
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• [PATCH 1/2] backlight/lp855x: Refactor dt parsing code
  • From: Sean Paul <seanpaul@xxxxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 0/2] dt-bindings: simplefb: Drop the advice about using a specific path for nodes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 3/6] video: fbdev-MMP: Fix typos for the word "destroy"
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH V2 6/6] pcmcia: sa1100: make use of device clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 5/6] pcmcia: sa1111: provide device clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 4/6] pcmcia: soc-common: enable/disable socket clocks
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 3/6] fbdev: sa1100fb: make use of device clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 2/6] ARM: sa1100: add a clock alias for sa1111 pcmcia device
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 1/6] ARM: sa1100: add cpu clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 0/6] ARM: sa1100: use clock api to get cpu freq in fb and pcmcia drivers
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH v2] backlight: lp8788: Deletion of a check before backlight_device_unregister()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 5/6] video: fbdev-MMP: Fix a typo for the word "destroyed"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/6] video: fbdev-MMP: Fix typos for the word "destroy"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v2 1/5] video: omapdss: Add opa362 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 4/4] ARM: ls1021a: dts: Add and enable dt node for dcfb.
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCH 0/4] LS1021A: Add dcfb framebuffer driver support.
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCH 3/4] ARM: ls1021a: dtsi: Add dt node support for dcfb.
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCH 2/4] video: fsl-dcfb: Add devicetree binding support
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCH 1/4] video: fsl-dcfb: Add dcfb framebuffer driver for LS1021A platform
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] backlight: lp8788: Deletion of an unnecessary check before the function call "backlight_device_unregister"
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/1] backlight: lp8788: Deletion of an unnecessary check before the function call "backlight_device_unregister"
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/1] backlight: lp8788: Deletion of an unnecessary check before the function call "backlight_device_unregister"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] video: uvesafb: Deletion of an unnecessary check before the function call "platform_device_put"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] video: fbdev-VIA: Deletion of an unnecessary check before the function call "framebuffer_release"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] video: fbdev-MMP: Deletion of an unnecessary check before the function call "mmp_unregister_path"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] video: mx3fb: Deletion of an unnecessary check before the function call "backlight_device_unregister"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] video: fbdev-OMAP2: Deletion of unnecessary checks before the function call "i2c_put_adapter"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] video: fbdev-SIS: Deletion of unnecessary checks before the function call "pci_dev_put"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] video: smscufx: Deletion of unnecessary checks before the function call "vfree"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] video: udlfb: Deletion of unnecessary checks before the function call "vfree"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] video: uvesafb: Deletion of an unnecessary check before the function call "uvesafb_free"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] video: fbdev-LCDC: Deletion of an unnecessary check before the function call "vfree"
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] video: fbmon: Check Standard Timing against DMT and maxclk
  • From: David Ung <davidu@xxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH] video: fbdev: Add CVT timing calculations.
  • From: David Ung <davidu@xxxxxxxxxx>
• Re: [PATCH] video: fbdev: Add CVT timing calculations.
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 1/5] video: omapdss: Add opa362 driver
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH] video: ARM CLCD: Remove duplicated include in amba-clcd.c
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCH] video: fbdev: Add CVT timing calculations.
  • From: David Ung <davidu@xxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: SSD1306 OLED driver
  • From: "maxime.ripard@xxxxxxxxxxxxxxxxxx" <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• RE: SSD1306 OLED driver
  • From: Ssagarr Patil <hugarsagar@xxxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: simplefb: Drop the advice about using a specific path for nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 0/2] dt-bindings: simplefb: Drop the advice about using a specific path for nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Ian Campbell <ijc@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: simplefb: Drop the advice about using a specific path for nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 0/2] dt-bindings: simplefb: Drop the advice about using a specific path for nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v7.1 11/19] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Ian Campbell <ijc@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: simplefb: Drop the advice about using a specific path for nodes
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: simplefb-sunxi: Add sunxi simplefb extensions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 0/2] dt-bindings: simplefb: Drop the advice about using a specific path for nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: simplefb: Drop the advice about using a specific path for nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] video: ARM CLCD: Remove duplicated include in amba-clcd.c
  • From: Pawel Moll <pawel.moll@xxxxxxx>
• [PATCH] video: ARM CLCD: Remove duplicated include in amba-clcd.c
  • From: Qiang Chen <qiang2.chen@xxxxxxxxxxxxxx>
• Re: SSD1306 OLED driver
  • From: "maxime.ripard@xxxxxxxxxxxxxxxxxx" <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7.1 11/19] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH] x86, ia64: Do not lose track of the EFI default VGA device
  • From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] x86, ia64: Do not lose track of the EFI default VGA device
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] x86, ia64: Do not lose track of the EFI default VGA device
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7.1 11/19] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH] x86, ia64: Do not lose track of the EFI default VGA device
  • From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v7.1 11/19] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v5 1/5] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] x86, ia64: Do not lose track of the EFI default VGA device
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH RESEND 0/5] arm: sa1100: add cpu clock for fbdev and pcmcia
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH v5 1/5] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• SSD1306 OLED driver
  • From: Ssagarr Patil <hugarsagar@xxxxxxxxxxx>
• Re: [PATCH 4/7] ARM: dts: sun6i: Add simplefb node
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 2/5] of.h: Keep extern declaration of of_* variables when !CONFIG_OF
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 3/5] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 5/5] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 4/5] fbcon: Change fbcon_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v7] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [PATCH 4/7] ARM: dts: sun6i: Add simplefb node
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 4/7] ARM: dts: sun6i: Add simplefb node
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: simplefb: Document naming scheme for pre-populated simplefb nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6] simplefb: add clock handling code
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH v4 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: simplefb: Document naming scheme for pre-populated simplefb nodes
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• [PATCH] dt-bindings: simplefb: Document naming scheme for pre-populated simplefb nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v6] simplefb: add clock handling code
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v4 4/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 3/4] fbcon: Change fbcon_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 0/5] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/7] ARM: dts: sun6i: Add simplefb node
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/7] ARM: dts: sunxi: Add regulator-boot-on property to ahci-5v regulator
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] ARM: dts: sun6i: Add support for the status led
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] ARM: dts: sun6i: Add EHCI support for the M9 board
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/7] ARM: dts: sun6i: Add simplefb node
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] video: omapdss: Add opa362 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 1/5] video: omapdss: Add opa362 driver
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v5 0/5] simplefb: add clock handling code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [linux-sunxi] Re: [PATCH v3 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH v5 0/5] simplefb: add clock handling code
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v3 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v5 0/5] simplefb: add clock handling code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v3 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v3 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 4/4] fbcon: Change fbcon_init from module_init to fs_initcall
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 4/4] fbcon: Change fbcon_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/5] video: omapdss: Add opa362 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH v2 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 7/7] ARM: dts: sun6i: Add support for the status led
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 6/7] ARM: dts: sun6i: Add EHCI support for the M9 board
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/7] ARM: dts: sunxi: Add regulator-boot-on property to ahci-5v regulator
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 5/7] ARM: dts: sun7i: Add simplefb node
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 4/7] ARM: dts: sun6i: Add simplefb node
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/7] ARM: dts: sun4i: Add simplefb node
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/7] ARM: dts: sun5i: Add simplefb node
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 4/4] fbcon: Change fbcon_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Julian Calaby <julian.calaby@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [linux-sunxi] [PATCH 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v5 0/5] simplefb: add clock handling code
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Julian Calaby <julian.calaby@xxxxxxxxx>
• Re: [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 2/5] Documentation: DT: Add documentation for ti,opa362 bindings
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 0/5] omapdss: Add video output support for gta04 board
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 1/5] video: omapdss: Add opa362 driver
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 3/5] arm: dts: omap3-gta04: Add handling for tv output
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 5/5] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 4/5] arm: dts: omap3: Add definition for devconf1 register
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 2/4] simplefb: Add support for enumerating simplefb dt nodes in /chosen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: simplefb: Specify node location and handoff related properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/4] simplefb: Change simplefb_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 4/4] fbcon: Change fbcon_init from module_init to fs_initcall
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: Add a clocks property to the simple-framebuffer binding
  • From: Rob Herring <robherring2@xxxxxxxxx>
• [PATCH v5 3/5] simplefb: formalize pseudo palette handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 5/5] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 0/5] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 4/5] simplefb: add goto error path to probe
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 2/5] dt-bindings: Add a clocks property to the simple-framebuffer binding
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 1/5] simplefb: Add simplefb MAINTAINERS entry
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• simplefb device tree bindings enumeration and handover
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: Add a clocks property to the simple-framebuffer binding
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: Add a clocks property to the simple-framebuffer binding
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• [PATCH v7.1 05/19] OMAPDSS: hdmi4_core: Remove unused hdmi4_audio_get_dma_port()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 09/19] ASoC: omap-hdmi-audio: Add platform device for OMAP HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 03/19] OMAPDSS: hdmi.h: Add HDMI_AUDIO_LAYOUT_6CH enum value
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 10/19] OMAPDSS: Kconfig: Remove HDMI audio booleans from Kconfig
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 11/19] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 19/19] OMAPDSS: hdmi5: Change hdmi_wp idlemode to to no_idle for audio playback
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 18/19] OMAPDSS: Remove all references to obsolete HDMI audio callbacks
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 17/19] ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 16/19] OMAPDSS: hdmi5: Register ASoC platform device for omap hdmi audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 13/19] OMAPDSS: hdmi4: Remove callbacks for the old ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 12/19] OMAPDSS: hdmi.h: Add members to hdmi drvdata for audio implementation
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 15/19] OMAPDSS: hdmi5: Remove callbacks for the old ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 14/19] OMAPDSS: hdmi4: Register ASoC platform device for omap hdmi audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 04/19] OMAPDSS: hdmi: Remove most of OMAP[45]_DSS_HDMI_AUDIO ifdefs
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 08/19] OMAPDSS: hdmi: Add pdev pointer for audio_pdev in HDMI DRV data
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 07/19] OMAPDSS: hdmi: Make hdmi structure public
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 06/19] OMAPDSS: hdmi_wp: Add function for getting audio dma address
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 02/19] OMAPDSS: hdmi5_core: Initialize mandatory sample_order parameter
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 01/19] OMAPDSS: hdmi_wp: Protect reserved bits in hdmi_wp_audio_config_format()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7.1 00/19] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v7 06/20] OMAPDSS: omapdss.h: Remove audio_state member of struct omap_dss_device
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 2/4] Documentation: DT: Add documentation for ti,opa362 bindings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/4] video: omapdss: Add opa362 driver
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH 1/4] video: omapdss: Add opa362 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v7 18/20] ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v7 10/20] ASoC: omap-hdmi-audio: Add platform device for OMAP HDMI audio support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 09/22] OMAPDSS: DSI: turn hsdivs fields to arrays
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 12/22] OMAPDSS: Add common PLL code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 16/22] OMAPDSS: HDMI: rewrite HDMI PLL calculation code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 15/22] OMAPDSS: HDMI5: disable interlace modes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 18/22] OMAPDSS: HDMI: store WP pointer to hdmi_pll_data
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 21/22] OMAPDSS: HDMI: use common DSS PLL support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 17/22] OMAPDSS: HDMI: Remove HDMI PLL reset
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 20/22] OMAPDSS: HDMI: remove extra poweroff
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 22/22] OMAPDSS: features: remove unused DSI PLL features
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 19/22] OMAPDSS: HDMI: split PLL enable & config
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 13/22] OMAPDSS: DSI: use common DSS PLL support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 11/22] OMAPDSS: DSI: dsi_runtime_get/put in pll_init
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 14/22] OMAPDSS: HDMI: fix setting REFSEL
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 10/22] OMAPDSS: DSI: features: combine dsi & dispc hsdivs
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 08/22] OMAPDSS: DSI: rename clkin4ddr to clkdco
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 07/22] OMAPDSS: DSI: use struct copy instead of individual field copy
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 06/22] OMAPDSS: DSI: remove pll_locked field
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 05/22] OMAPDSS: DSI: remove clkin from dsi_clock_info
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 04/22] OMAPDSS: DSI: separate LP clock info from dsi_clock_info
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 03/22] OMAPDSS: DSI: always power on hsclk & hsdiv
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 02/22] OMAPDSS: DSI: remove unused hsdiv wait funcs
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 01/22] OMAPDSS: DSI: wait for hsdiv clocks when enabling PLL
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 00/22] OMAPDSS: Create a DSS PLL library
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v7 05/20] OMAPDSS: hdmi4_core: Remove unused hdmi4_audio_get_dma_port()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 02/20] OMAPDSS: hdmi5_core: Initialize mandatory sample_order parameter
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 13/20] OMAPDSS: hdmi.h: Add members to hdmi drvdata for audio implementation
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 12/20] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 14/20] OMAPDSS: hdmi4: Remove callbacks for the old ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 10/20] ASoC: omap-hdmi-audio: Add platform device for OMAP HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 11/20] OMAPDSS: Kconfig: Remove HDMI audio booleans from Kconfig
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 19/20] OMAPDSS: Remove all references to obsolete HDMI audio callbacks
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 18/20] ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 17/20] OMAPDSS: hdmi5: Register ASoC platform device for omap hdmi audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 20/20] OMAPDSS: hdmi5: Change hdmi_wp idlemode to to no_idle for audio playback
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 15/20] OMAPDSS: hdmi4: Register ASoC platform device for omap hdmi audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 16/20] OMAPDSS: hdmi5: Remove callbacks for the old ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 09/20] OMAPDSS: hdmi: Add pdev pointer for audio_pdev in HDMI DRV data
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 06/20] OMAPDSS: omapdss.h: Remove audio_state member of struct omap_dss_device
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 08/20] OMAPDSS: hdmi: Make hdmi structure public
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 04/20] OMAPDSS: hdmi: Remove most of OMAP[45]_DSS_HDMI_AUDIO ifdefs
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 07/20] OMAPDSS: hdmi_wp: Add function for getting audio dma address
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 01/20] OMAPDSS: hdmi_wp: Protect reserved bits in hdmi_wp_audio_config_format()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 03/20] OMAPDSS: hdmi.h: Add HDMI_AUDIO_LAYOUT_6CH enum value
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v7 00/20] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] video: fbdev: Add CVT timing calculations.
  • From: David Ung <davidu@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: Add a clocks property to the simple-framebuffer binding
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH v4 3/5] simplefb: formalize pseudo palette handling
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH v4 1/5] simplefb: Add simplefb MAINTAINERS entry
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 3/4] arm: dts: omap3-gta04: Add handling for tv output
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 3/4] arm: dts: omap3-gta04: Add handling for tv output
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/4] arm: dts: omap3-gta04: Add handling for tv output
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] backlight: pwm: clean up pwm requested using legacy API
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] backlight: pwm: don't call legacy pwm request for device defined in dt
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH 1/2] backlight: pwm: don't call legacy pwm request for device defined in dt
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH 1/2] backlight: pwm: don't call legacy pwm request for device defined in dt
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 2/2] backlight: pwm: clean up pwm requested using legacy API
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 2/2] backlight: pwm: clean up pwm requested using legacy API
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] backlight: pwm: clean up pwm requested using legacy API
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] backlight: pwm: clean up pwm requested using legacy API
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] m501fb: don't return zero on failure path in sm501fb_probe()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] fbdev: mxsfb: Add support for mx6sl and mx6sx
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] fbdev: mxsfb: Add support for mx6sl and mx6sx
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH RESEND 5/5] pcmcia: sa1111: provide device clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH RESEND 4/5] pcmcia: sa1100: make use of device clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH RESEND 3/5] fbdev: sa1100fb: make use of device clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH RESEND 2/5] arm: sa1100: add a clock alias for sa1111 pcmcia device
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH RESEND 1/5] arm: sa1100: add cpu clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH RESEND 0/5] arm: sa1100: add cpu clock for fbdev and pcmcia
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Luc Verhaegen <libv@xxxxxxxxx>
• [PATCH 0/4] omapdss: Add video output support for gta04 board
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 3/4] arm: dts: omap3-gta04: Add handling for tv output
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 1/4] video: omapdss: Add opa362 driver
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 4/4] arm: dts: omap3-gta04: Add static configuration for devconf1 register
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 2/4] Documentation: DT: Add documentation for ti,opa362 bindings
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: "jonsmirl@xxxxxxxxx" <jonsmirl@xxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface
  • From: Alexandre Courbot <gnurou@xxxxxxxxx>
• [PATCH] m501fb: don't return zero on failure path in sm501fb_probe()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 14/15] gpio: locomo: implement per-pin irq handling
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 09/15] ARM: sa1100: don't preallocate IRQ space for locomo
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 14/15] gpio: locomo: implement per-pin irq handling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 09/15] ARM: sa1100: don't preallocate IRQ space for locomo
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [GIT PULL] fbdev fixes for 3.18
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] omap: dss: connector-analog-tv: Add missing module device table
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 0/5] arm: sa1100: fix sa1100 fb and pcmcia w/o cpufreq
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface
  • From: Alexandre Courbot <gnurou@xxxxxxxxx>
• Re: [PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 12/15] ARM: pxa: poodle: don't preallocate IRQ space for locomo
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 06/15] video: lcd: add LoCoMo LCD driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 15/15] spi: add locomo SPI driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/5] fbdev: sa1100fb: make use of device clock
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v4 0/5] simplefb: add clock handling code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 06/15] video: lcd: add LoCoMo LCD driver
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 00/15] new locomo driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 00/15] new locomo driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 05/15] video: backlight: add new locomo backlight driver
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 00/15] new locomo driver
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 04/15] input: convert LoCoMo keyboard driver to use new locomo core
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 15/15] spi: add locomo SPI driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 13/15] ARM: drop old LoCoMo driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 14/15] gpio: locomo: implement per-pin irq handling
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 12/15] ARM: pxa: poodle: don't preallocate IRQ space for locomo
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 10/15] ARM: pxa: poodle: use new LoCoMo driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 09/15] ARM: sa1100: don't preallocate IRQ space for locomo
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 08/15] ARM: sa1100: make collie use new locomo drivers
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 07/15] video: backlight: drop old locomo bl/lcd driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 06/15] video: lcd: add LoCoMo LCD driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 05/15] video: backlight: add new locomo backlight driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 04/15] input: convert LoCoMo keyboard driver to use new locomo core
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 03/15] leds: port locomo leds driver to new locomo core
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 01/15] mfd: add new driver for Sharp LoCoMo
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 00/15] new locomo driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH] omap: dss: connector-analog-tv: Add missing module device table
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH] fbdev: mxsfb: Add support for mx6sl and mx6sx
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 0/5] arm: sa1100: fix sa1100 fb and pcmcia w/o cpufreq
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 3/5] fbdev: sa1100fb: make use of device clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 2/5] arm: sa1100: add a clock alias for sa1111 pcmcia device
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 4/5] pcmcia: sa1100: make use of device clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 5/5] pcmcia: sa1111: provide device clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 1/5] arm: sa1100: add cpu clock
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH v4 4/5] simplefb: add goto error path to probe
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 0/5] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 5/5] simplefb: add clock handling code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 1/5] simplefb: Add simplefb MAINTAINERS entry
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 3/5] simplefb: formalize pseudo palette handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 2/5] dt-bindings: Add a clocks property to the simple-framebuffer binding
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 4/5] OMAPDSS: fix dispc register dump for preload & mflag
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 5/5] OMAPDSS: DSI: Fix PLL_SELFEQDCO field width
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 3/5] OMAPDSS: DISPC: fix mflag offset
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/5] OMAPDSS: HDMI: fix regsd write
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/5] OMAPDSS: HDMI: fix PLL GO bit handling
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drivers: video: fbdev: atmel_lcdfb.c: remove unnecessary header
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] video/console: Resolve several shadow warnings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] fbcon: Fix option parsing control flow in fb_console_setup
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO
  • From: Darren Hart <dvhart@xxxxxxxxxxxxx>
• Re: [PATCH] drivers: video: fbdev: atmel_lcdfb.c: remove unnecessary header
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 3/5] video: fbdev: uvesafb.c: Cleaning up missing null-terminate by switching from strncpy to strzcpy
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 3/5] video: fbdev: uvesafb.c: Cleaning up missing null-terminate by switching from strncpy to strzcpy
  • From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
• [PATCH] drivers: depend on instead of select BACKLIGHT_CLASS_DEVICE and ACPI_VIDEO
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH] drivers: video: fbdev: atmel_lcdfb.c: remove unnecessary header
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] OMAPFB: remove wrong __exit and __exit_p()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/5] OMAPFB: remove wrong __exit and __exit_p()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/5] OMAPDSS: apply: wait pending updates on manager disable
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 5/5] OMAPFB: fix releasing overlays
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 4/5] OMAPFB: fix overlay disable when freeing resources.
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/5] OMAPDSS: set suppress_bind_attrs
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/5] OMAPFB: remove wrong __exit and __exit_p()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 00/12] dmaengine: remove users of device_control
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [GIT PULL] fbdev changes for 3.18
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v6 08/18] ASoC: codecs/hdmi: HDMI codec doesn't benefit from pmdown delay
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 07/18] ASoC: codecs/hdmi: Mark the maximum significant bits to HDMI codec
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()
  • From: Felipe Balbi <balbi@xxxxxx>
• Driver submit
  • From: <davorjoja@xxxxxxxxxxxxxxx>
• [PATCH v6 11/18] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 18/18] OMAPDSS: Remove all references to obsolete HDMI audio callbacks
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 16/18] OMAPDSS: hdmi5: Register ASoC platfrom device for omap hdmi audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 14/18] OMAPDSS: hdmi4: Register ASoC platfrom device for omap hdmi audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 15/18] OMAPDSS: hdmi5: Remove callbacks for the old ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 17/18] ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 09/18] ASoC: omap-hdmi-audio: Add platfrom device for OMAP HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 10/18] OMAPDSS: Kconfig: Remove HDMI audio booleans from Kconfig
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 13/18] OMAPDSS: hdmi4: Remove callbacks for the old ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 12/18] OMAPDSS: hdmi.h: Add members to hdmi drvdata for audio implementation
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 06/18] OMAPDSS: hdmi: Add pdev pointer for audio_pdev in HDMI DRV data
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 07/18] ASoC: codecs/hdmi: Mark the maximum significant bits to HDMI codec
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 05/18] OMAPDSS: hdmi: Make hdmi structure public
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 08/18] ASoC: codecs/hdmi: HDMI codec doesn't benefit from pmdown delay
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 03/18] OMAPDSS: hdmi4_core: Remove unused hdmi4_audio_get_dma_port()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 04/18] OMAPDSS: hdmi_wp: Add function for getting audio dma address
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 02/18] OMAPDSS: hdmi: Remove most of OMAP[45]_DSS_HDMI_AUDIO ifdefs
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 01/18] OMAPDSS: hdmi.h: Add HDMI_AUDIO_LAYOUT_6CH enum value
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 00/18] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH] video/console: Resolve several shadow warnings
  • From: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
• [PATCH 12/12] video: mx3fb: use dmaengine_terminate_all() API
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH 00/12] dmaengine: remove users of device_control
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 2/2] backlight: pwm: clean up pwm requested using legacy API
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] backlight: pwm: don't call legacy pwm request for device defined in dt
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] backlight: pwm: clean up pwm requested using legacy API
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH 1/2] backlight: pwm: don't call legacy pwm request for device defined in dt
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH 0/2] backlight: pwm: fix oops on accessing removed legacy pwm device
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH] fbcon: Fix option parsing control flow in fb_console_setup
  • From: Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>
• Re: [PATCH] fonts: Add 6x10 font
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] pwm-backlight: Turn off pwm backlight in probe
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] pwm-backlight: Turn off pwm backlight in probe
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH] pwm-backlight: Turn off pwm backlight in probe
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [RESUBMIT PATCH v3 2/8] backlight: Add support Skyworks SKY81452 backlight driver
  • From: Gyungoh Yoo <gyungoh@xxxxxxxxx>
• Re: [PATCH] fonts: Add 6x10 font
  • From: Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>
• Re: [RESUBMIT PATCH v3 2/8] backlight: Add support Skyworks SKY81452 backlight driver
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH] pwm-backlight: Turn off pwm backlight in probe
  • From: Ajay kumar <ajaynumb@xxxxxxxxx>
• Re: [PATCH] pwm-backlight: Turn off pwm backlight in probe
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH] pwm-backlight: Turn off pwm backlight in probe
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] pwm-backlight: Turn off pwm backlight in probe
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [RESUBMIT PATCH v3 2/8] backlight: Add support Skyworks SKY81452 backlight driver
  • From: Gyungoh Yoo <gyungoh@xxxxxxxxx>
• [PATCH] pwm-backlight: Turn off pwm backlight in probe
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [RFC 09/10] Documentation: devicetree: bindings: video: Xylon driver binding
  • From: Davor Joja <davorjoja@xxxxxxxxxxxxxxx>
• [RFC 10/10] Documentation: devicetree: bindings: video: Xylon logiCVC IP binding
  • From: Davor Joja <davorjoja@xxxxxxxxxxxxxxx>
• [RFC 07/10] include: uapi: linux: Xylon framebuffer driver header file
  • From: Davor Joja <davorjoja@xxxxxxxxxxxxxxx>