On Tue, Dec 2, 2014 at 5:39 PM, Sean Paul <seanpaul@xxxxxxxxxxxx> wrote:
> This patch adds a supply regulator to the lp855x platform data to facilitate
> powering on/off the 3V rail attached to the controller.
>
> Cc: Stéphane Marchesin <marcheu@xxxxxxxxxxxx>
> Cc: Aaron Durbin <adurbin@xxxxxxxxxxxx>
> Acked-by: Milo Kim <milo.kim@xxxxxx>
> Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Acked-by: Bryan Wu <cooloney@xxxxxxxxx>
Thanks,
-Bryan
> ---
>
> Changes in v2:
> - Add NULL check in lp855x_remove
>
>
> .../devicetree/bindings/video/backlight/lp855x.txt | 2 ++
> drivers/video/backlight/lp855x_bl.c | 18 ++++++++++++++++++
> include/linux/platform_data/lp855x.h | 2 ++
> 3 files changed, 22 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> index 96e83a5..0a3ecbc 100644
> --- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> +++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> @@ -12,6 +12,7 @@ Optional properties:
> - pwm-period: PWM period value. Set only PWM input mode used (u32)
> - rom-addr: Register address of ROM area to be updated (u8)
> - rom-val: Register value to be updated (u8)
> + - power-supply: Regulator which controls the 3V rail
>
> Example:
>
> @@ -56,6 +57,7 @@ Example:
> backlight@2c {
> compatible = "ti,lp8557";
> reg = <0x2c>;
> + power-supply = <&backlight_vdd>;
>
> dev-ctrl = /bits/ 8 <0x41>;
> init-brt = /bits/ 8 <0x0a>;
> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> index 257b3ba..a26d3bb 100644
> --- a/drivers/video/backlight/lp855x_bl.c
> +++ b/drivers/video/backlight/lp855x_bl.c
> @@ -17,6 +17,7 @@
> #include <linux/of.h>
> #include <linux/platform_data/lp855x.h>
> #include <linux/pwm.h>
> +#include <linux/regulator/consumer.h>
>
> /* LP8550/1/2/3/6 Registers */
> #define LP855X_BRIGHTNESS_CTRL 0x00
> @@ -383,6 +384,13 @@ static int lp855x_parse_dt(struct lp855x *lp)
> pdata->rom_data = &rom[0];
> }
>
> + pdata->supply = devm_regulator_get(dev, "power");
> + if (IS_ERR(pdata->supply)) {
> + if (PTR_ERR(pdata->supply) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + pdata->supply = NULL;
> + }
> +
> lp->pdata = pdata;
>
> return 0;
> @@ -423,6 +431,14 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> else
> lp->mode = REGISTER_BASED;
>
> + if (lp->pdata->supply) {
> + ret = regulator_enable(lp->pdata->supply);
> + if (ret < 0) {
> + dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
> + return ret;
> + }
> + }
> +
> i2c_set_clientdata(cl, lp);
>
> ret = lp855x_configure(lp);
> @@ -454,6 +470,8 @@ static int lp855x_remove(struct i2c_client *cl)
>
> lp->bl->props.brightness = 0;
> backlight_update_status(lp->bl);
> + if (lp->pdata->supply)
> + regulator_disable(lp->pdata->supply);
> sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
>
> return 0;
> diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
> index 1b2ba24..9c7fd1e 100644
> --- a/include/linux/platform_data/lp855x.h
> +++ b/include/linux/platform_data/lp855x.h
> @@ -136,6 +136,7 @@ struct lp855x_rom_data {
> Only valid when mode is PWM_BASED.
> * @size_program : total size of lp855x_rom_data
> * @rom_data : list of new eeprom/eprom registers
> + * @supply : regulator that supplies 3V input
> */
> struct lp855x_platform_data {
> const char *name;
> @@ -144,6 +145,7 @@ struct lp855x_platform_data {
> unsigned int period_ns;
> int size_program;
> struct lp855x_rom_data *rom_data;
> + struct regulator *supply;
> };
>
> #endif
> --
> 2.2.0.rc0.207.ga3a616c
>
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
