On DRA7xx, DISPC needs to write output signal polarities not only to a
DISPC register, like for all earlier DSS versions, but to control
module's CTRL_CORE_SMA_SW_1 register.
This patch adds support to write the polarities to control module.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/video/fbdev/omap2/dss/dispc.c | 40 +++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/video/fbdev/omap2/dss/dispc.c b/drivers/video/fbdev/omap2/dss/dispc.c
index 48429bab294a..31b743c70272 100644
--- a/drivers/video/fbdev/omap2/dss/dispc.c
+++ b/drivers/video/fbdev/omap2/dss/dispc.c
@@ -36,6 +36,9 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/sizes.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
#include <video/omapdss.h>
@@ -117,6 +120,9 @@ static struct {
const struct dispc_features *feat;
bool is_enabled;
+
+ struct regmap *syscon_pol;
+ u32 syscon_pol_offset;
} dispc;
enum omap_color_component {
@@ -2958,6 +2964,25 @@ static void _dispc_mgr_set_lcd_timings(enum omap_channel channel, int hsw,
FLD_VAL(vsync_level, 12, 12);
dispc_write_reg(DISPC_POL_FREQ(channel), l);
+
+ if (dispc.syscon_pol) {
+ const int shifts[] = {
+ [OMAP_DSS_CHANNEL_LCD] = 0,
+ [OMAP_DSS_CHANNEL_LCD2] = 1,
+ [OMAP_DSS_CHANNEL_LCD3] = 2,
+ };
+
+ u32 mask, val;
+
+ mask = (1 << 0) | (1 << 3) | (1 << 6);
+ val = (rf << 0) | (ipc << 3) | (onoff << 6);
+
+ mask <<= 16 + shifts[channel];
+ val <<= 16 + shifts[channel];
+
+ regmap_update_bits(dispc.syscon_pol, dispc.syscon_pol_offset,
+ mask, val);
+ }
}
/* change name to mode? */
@@ -3741,6 +3766,7 @@ static int __init omap_dispchw_probe(struct platform_device *pdev)
u32 rev;
int r = 0;
struct resource *dispc_mem;
+ struct device_node *np = pdev->dev.of_node;
dispc.pdev = pdev;
@@ -3767,6 +3793,20 @@ static int __init omap_dispchw_probe(struct platform_device *pdev)
return -ENODEV;
}
+ if (np && of_property_read_bool(np, "syscon-pol")) {
+ dispc.syscon_pol = syscon_regmap_lookup_by_phandle(np, "syscon-pol");
+ if (IS_ERR(dispc.syscon_pol)) {
+ dev_err(&pdev->dev, "failed to get syscon-pol regmap\n");
+ return PTR_ERR(dispc.syscon_pol);
+ }
+
+ if (of_property_read_u32_index(np, "syscon-pol", 1,
+ &dispc.syscon_pol_offset)) {
+ dev_err(&pdev->dev, "failed to get syscon-pol offset\n");
+ return -EINVAL;
+ }
+ }
+
pm_runtime_enable(&pdev->dev);
r = dispc_runtime_get();
--
2.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
