Linux ARM MSM

• Thread Index

• [PATCH v10 30/54] media: amphion: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v10 39/54] media: usb: cx231xx: Set min_buffers_needed to CX231XX_MIN_BUF
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v10 05/54] media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access to buffers array
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v10 14/54] media: test-drivers: vivid: Increase max supported buffers for capture queues
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v10 40/54] media: usb: hackrf: Set min_buffers_needed to 8
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v10 11/54] media: videobuf2: Access vb2_queue bufs array through helper functions
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v10 33/54] media: nxp: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v10 44/54] media: meson: vdec: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v10 01/54] media: videobuf2: Rework offset 'cookie' encoding pattern
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v10 04/54] media: amphion: Use vb2_get_buffer() instead of directly access to buffers array
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] usb: ucsi: glink: use the connector orientation GPIO to provide switch events
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 5/8] drm/msm/dp: incorporate pm_runtime framework into DP driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/3] arm64: dts: qcom: Add interconnect nodes for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v3 6/7] drm/msm/dp: add pm_runtime_force_suspend()/resume()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 01/11] firmware: qcom: move Qualcomm code into its own directory
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2] dt-bindings: nvmem: move deprecated cells binding to its own file
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 3/3] clk: qcom: add SM8550 DISPCC driver
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v2 2/4] usb: ucsi: glink: use the connector orientation GPIO to provide switch events
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 5/5] arm64: dts: qcom: sm8450: add TRNG node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 4/5] arm64: dts: qcom: sm8550: add TRNG node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 3/5] crypto: qcom-rng - Add hw_random interface support
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH v4 1/5] dt-bindings: crypto: qcom,prng: document that RNG on SM8450 is a TRNG
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 2/5] dt-bindings: crypto: qcom,prng: document SM8550
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 0/5] arm64: qcom: sm8x50: enable RNG
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH V2] dt-bindings: nvmem: move deprecated cells binding to its own file
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] dt-bindings: nvmem: move deprecated cells binding to its own file
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: qcm6490: Add qcm6490 dts file
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: arm: qcom: Add QCM6490 IDP board
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH v2 0/2] Initial support for the QCM6490 IDP
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: arm: qcom: drop the IPQ board types
  • From: Sridharan S N <quic_sridsn@xxxxxxxxxxx>
• [PATCH] dt-bindings: nvmem: move deprecated cells binding to its own file
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH v3 3/3] clk: qcom: add SM8550 DISPCC driver
  • From: Sophon Wu <wuxilin123@xxxxxxxxx>
• Re: [PATCH v8 2/5] drm/panfrost: Add fdinfo support GPU load metrics
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 6/7] drm/msm/dp: add pm_runtime_force_suspend()/resume()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: qcom: sdm670: add display subsystem
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v2 5/6] drm/msm/dpu: Add hw revision 4.1 (SDM670)
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v2 4/6] drm/msm: mdss: add support for SDM670
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v2 3/6] dt-bindings: display: msm: Add SDM670 MDSS
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: display/msm: sdm845-dpu: Describe SDM670
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: display/msm: dsi-controller-main: add SDM670 compatible
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v2 0/6] SDM670 display subsystem support
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: (subset) [PATCH 00/40] soc: Convert to platform remove callback returning void
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v8 20/24] iommu: Require a default_domain for all iommu drivers
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH v3 6/7] drm/msm/dp: add pm_runtime_force_suspend()/resume()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v4 5/8] drm/msm/dp: incorporate pm_runtime framework into DP driver
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v4 5/8] drm/msm/dp: incorporate pm_runtime framework into DP driver
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: qcom-cci: Document SC7280 compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 5/6] drm/msm/dpu: Add hw revision 4.1 (SDM670)
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [PATCH v8 20/24] iommu: Require a default_domain for all iommu drivers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 01/33] xhci: add support to allocate several interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5 6/6] cpufreq: qcom-nvmem: enable core voltage scaling for MSM8960
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 5/6] cpufreq: qcom-nvmem: provide separate configuration data for apq8064
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 4/6] cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 2/6] cpufreq: qcom-nvmem: create L2 cache device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 3/6] cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 1/6] dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 0/6] cpufreq: qcom-nvmem: support apq8064 cpufreq scaling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 5/6] cpufreq: qcom-nvmem: provide separate configuration data for apq8064
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 4/4] firmware: arm_scmi: Add qcom hvc/shmem transport support
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v4 4/4] firmware: arm_scmi: Add qcom hvc/shmem transport support
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v4 4/4] firmware: arm_scmi: Add qcom hvc/shmem transport support
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH v4 1/4] firmware: arm_scmi: Add polling support for completion in smc
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v4 4/4] firmware: arm_scmi: Add qcom hvc/shmem transport support
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH 0/9] drm: Annotate structs with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v4 1/4] firmware: arm_scmi: Add polling support for completion in smc
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH 0/9] drm: Annotate structs with __counted_by
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH 0/9] drm: Annotate structs with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 0/9] drm: Annotate structs with __counted_by
  • From: Christian König <ckoenig.leichtzumerken@xxxxxxxxx>
• Re: [PATCH v4 0/4] Add qcom hvc/shmem transport support
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH v4 0/4] Add qcom hvc/shmem transport support
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] usb: ucsi: glink: use the connector orientation GPIO to provide switch events
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v11 06/13] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v11 04/13] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: mfd: qcom,spmi-pmic: Update gpio example
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] clk: qcom: gcc-msm8953: fix stuck gcc_usb30_master_clk
  • From: Barnabás Czémán <trabarni@xxxxxxxxx>
• Re: [PATCH 0/9] drm: Annotate structs with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 03/13] arm64: dts: qcom: msm8916: Add common msm8916-modem-qdsp6.dtsi
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 0/9] drm: Annotate structs with __counted_by
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v9 00/53] Add DELETE_BUF ioctl
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v2 06/11] firmware: qcom: scm: make qcom_scm_pas_init_image() use the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable venus node
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 1/3] media: venus: core: Set up secure memory ranges for SC7280
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 0/3] Enable venus on Fairphone 5 / non-ChromeOS sc7280 venus support
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/11] firmware: qcom: scm: make qcom_scm_pas_init_image() use the SCM allocator
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: (subset) [PATCH 00/40] soc: Convert to platform remove callback returning void
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v9 01/53] media: videobuf2: Rework offset 'cookie' encoding pattern
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: pm7250b: Use correct node name for gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: mfd: qcom,spmi-pmic: Drop unused labels from examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 13/53] media: Report the maximum possible number of buffers for the queue
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: qcom-cci: Document SC7280 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 13/53] media: Report the maximum possible number of buffers for the queue
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH v9 01/53] media: videobuf2: Rework offset 'cookie' encoding pattern
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v8 13/53] media: Report the maximum possible number of buffers for the queue
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v2 06/11] firmware: qcom: scm: make qcom_scm_pas_init_image() use the SCM allocator
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v4 1/2] irqchip/qcom-pdc: Add support for v3.2 HW
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v4 1/2] irqchip/qcom-pdc: Add support for v3.2 HW
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable UFS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable UFS
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v9 14/53] media: test-drivers: vivid: Increase max supported buffers for capture queues
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 15/53] media: test-drivers: vicodec: Increase max supported capture queue buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 49/53] media: core: Add bitmap manage bufs array entries
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 51/53] media: v4l2: Add DELETE_BUFS ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 50/53] media: core: Free range of buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 53/53] media: test-drivers: Use helper for DELETE_BUFS ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 48/53] media: core: Rework how create_buf index returned value is computed
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 52/53] media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 47/53] media: cedrus: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 43/53] media: imx: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 44/53] media: meson: vdec: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 45/53] touchscreen: sur40: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 46/53] sample: v4l: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 41/53] media: usb: usbtv: Set min_buffers_needed to 2
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 42/53] media: atomisp: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 31/53] media: coda: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 38/53] media: usb: airspy: Set min_buffers_needed to 8
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 39/53] media: usb: cx231xx: Set min_buffers_needed to CX231XX_MIN_BUF
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 33/53] media: nxp: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 37/53] media: test-drivers: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 40/53] media: usb: hackrf: Set min_buffers_needed to 8
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 32/53] media: mediatek: vcodec: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 35/53] media: ti: Use queue min_buffers_needed field to set the min number of buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 36/53] media: verisilicon: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 30/53] media: amphion: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 34/53] media: renesas: Set min_buffers_needed to 16
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 28/53] media: pci: tw68: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 27/53] media: pci: netup_unidvb: Remove useless number of buffers check
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 29/53] media: pci: tw686x: Set min_buffers_needed to 3
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 26/53] media: pci: dt3155: Remove useless check
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 18/53] media: verisilicon: g2: Use common helpers to compute chroma and mv offsets
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 19/53] media: verisilicon: vp9: Allow to change resolution while streaming
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 25/53] media: pci: cx18: Set correct value to min_buffers_needed field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 22/53] media: dvb-core: Do not initialize twice queue num_buffer field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 23/53] media: dvb-frontends: rtl2832_srd: Use queue min_buffers_needed field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 21/53] media: core: Add helper to get queue number of buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 24/53] media: video-i2c: Set min_buffers_needed to 2
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 20/53] media: Remove duplicated index vs q->num_buffers check
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 16/53] media: verisilicon: Refactor postprocessor to store more buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 17/53] media: verisilicon: Store chroma and motion vectors offset
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 13/53] media: Report the maximum possible number of buffers for the queue
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 11/53] media: videobuf2: Access vb2_queue bufs array through helper functions
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 12/53] media: videobuf2: Be more flexible on the number of queue stored buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 09/53] media: atomisp: Use vb2_get_buffer() instead of directly access to buffers array
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 10/53] media: dvb-core: Use vb2_get_buffer() instead of directly access to buffers array
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 06/53] media: mediatek: vdec: Remove useless loop
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 05/53] media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access to buffers array
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 07/53] media: sti: hva: Use vb2_get_buffer() instead of directly access to buffers array
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 08/53] media: visl: Use vb2_get_buffer() instead of directly access to buffers array
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 03/53] media: videobuf2: Use vb2_buffer instead of index
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 04/53] media: amphion: Use vb2_get_buffer() instead of directly access to buffers array
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 02/53] media: videobuf2: Stop spamming kernel log with all queue counter
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 01/53] media: videobuf2: Rework offset 'cookie' encoding pattern
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v9 00/53] Add DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: qcom-cci: Document SC7280 compatible
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: mfd: qcom,spmi-pmic: Drop unused labels from examples
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: sm8550-qrd: add orientation gpio
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: sm8550-mtp: add orientation gpio
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/4] usb: ucsi: glink: use the connector orientation GPIO to provide switch events
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sm8550-mtp: add orientation gpio
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: sm8550-qrd: add orientation gpio
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 2/4] usb: ucsi: glink: use the connector orientation GPIO to provide switch events
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: soc: qcom: qcom,pmic-glink: add a gpio used to determine the Type-C port plug orientation
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 0/4] arm64: qcom: sm8550: retrieve USB-C port orientation from gpio
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA with coherent SMMU
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH v7 3/4] Input: goodix-berlin - add I2C support for Goodix Berlin Touchscreen IC
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 09/13] arm64: dts: qcom: msm8916-longcheer-l8150: Add sound and modem
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 03/13] arm64: dts: qcom: msm8916: Add common msm8916-modem-qdsp6.dtsi
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: boot: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/5] phy: qcom: edp: Introduce support for DisplayPort
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v11 13/13] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/5] misc: fastrpc: Add CRC support for remote buffers
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v3 6/6] ARM: dts: qcom: add device tree for Nokia Lumia 830
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 5/6] ARM: dts: qcom: add device tree for Nokia Lumia 735
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 2/6] ARM: dts: qcom: add common dt for MSM8x26 Lumias along with Nokia Lumia 630
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 2/3] misc: fastrpc: Free DMA handles for RPC calls with no arguments
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 0/9] drm: Annotate structs with __counted_by
  • From: Christian König <ckoenig.leichtzumerken@xxxxxxxxx>
• Re: [PATCH v2 4/5] clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable flash led
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sdm845-oneplus: enable flash LED
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable UFS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gcc-sc8280xp: Don't keep display AHB clocks always-on
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/5] phy: qcom: edp: Introduce support for DisplayPort
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-x13s: Use the correct DP PHY compatible
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gcc-sc8280xp: Don't keep display AHB clocks always-on
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] scsi: ufs: qcom: remove unnecessary check
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable UFS
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: drm/ci: add entries for xfail files
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH v2 2/2] arm64: dts: qcom: pm7250b: Use correct node name for gpios
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: mfd: qcom,spmi-pmic: Drop unused labels from examples
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 0/2] Small updates / fixups for PMIC spmi-gpio
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v13 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: i2c: qcom-cci: Document SC7280 compatible
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: sc7280: Add Camera Control Interface busses
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 0/2] Add CCI support for SC7280
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v7 4/4] Input: goodix-berlin - add SPI support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v7 2/4] Input: add core support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v7 3/4] Input: goodix-berlin - add I2C support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v7 1/4] dt-bindings: input: document Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v7 0/4] Input: add initial support for Goodix Berlin touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: mfd: qcom,spmi-pmic: Update gpio example
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] arm64: dts: qcom: Add interconnect nodes for SDX75
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable flash led
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sdm845-oneplus: enable flash LED
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 0/2] dts: qcom: enable flash LED on OnePlus 6 and PocoPhone F1
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v1 0/3] Add fixes for FastRPC driver
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v5 0/7] Add support for LUT PPG
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: crypto: ice: document the sa8775p inline crypto engine
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: boot: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 4/5] clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 5/6] ARM: dts: qcom: add device tree for Nokia Lumia 735
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v3 0/6] Initial support for MSM8x26 Lumias
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v3 6/6] ARM: dts: qcom: add device tree for Nokia Lumia 830
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v3 2/6] ARM: dts: qcom: add common dt for MSM8x26 Lumias along with Nokia Lumia 630
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: arm: qcom: Document MSM8x26-based Lumia phones
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v3 4/6] ARM: dts: qcom: add device tree for Microsoft Lumia 640 XL
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v3 3/6] ARM: dts: qcom: add device tree for Microsoft Lumia 640
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• Re: [PATCH] power: supply: qcom_battmgr: fix enable request endianness
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH] power: supply: qcom_battmgr: fix battery_id type
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: Add QCM6490 IDP board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SC7280 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 09/13] arm64: dts: qcom: msm8916-longcheer-l8150: Add sound and modem
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: phy: qcom,uniphy-usb: Document qcom,uniphy-usb phy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 4/5] clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: clocks: qcom,gcc-ipq8074: allow QMP PCI PHY PIPE clocks
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RESEND PATCH v6 3/3] input: pm8xxx-vibrator: add new SPMI vibrator support
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 2/3] PCI: qcom-ep: Make use of PCIE_SPEED2MBS_ENC() macro for encoding link speed
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: clocks: qcom,gcc-ipq8074: allow QMP PCI PHY PIPE clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: clock: Add SM8550 CAMCC yaml
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 5/5] arm64: boot: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: mfd: qcom,spmi-pmic: Update gpio example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V12 2/3] dt-bindings: pwm: add IPQ6018 binding
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH V12 2/3] dt-bindings: pwm: add IPQ6018 binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: boot: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 8/8] arm64: defconfig: Enable qcom USB UNIPHY driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to GCC
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 5/8] arm64: dts: qcom: ipq5332: Add clocks for USB Super-Speed
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 00/52] input: Convert to platform remove callback returning void
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH V12 3/3] arm64: dts: ipq6018: add pwm node
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH V4 4/4] dt-bindings: ufs: qcom: Align clk binding property for Qualcomm UFS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gcc-sc8280xp: Don't keep display AHB clocks always-on
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/5] clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/5] Add sc8280xp CAMCC bindings and driver
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: clock: qcom,camcc-common.yaml: Add a common file for camcc
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: clock: qcom,camcc-common.yaml: Add a common file for camcc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 01/53] media: videobuf2: Rework offset 'cookie' encoding pattern
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: boot: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v5 3/4] cpufreq: qcom-nvmem: add support for IPQ8064
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/8] arm64: dts: qcom: ipq5332: Add USB Super-Speed PHY node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 2/8] phy: qcom: Introduce Super-Speed USB UNIPHY driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: clock: Add SM8550 CAMCC yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V12 3/3] arm64: dts: ipq6018: add pwm node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/8] dt-bindings: usb: dwc3: Add clocks on Qualcomm IPQ5332
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 2/4] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v2 3/5] dt-bindings: clock: Add SC8280XP CAMCC
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH V4 1/4] scsi: ufs: qcom: dt-bindings: Add SC7280 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gcc-sc8280xp: Don't keep display AHB clocks always-on
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 4/8] dt-bindings: usb: dwc3: Add clocks on Qualcomm IPQ5332
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 1/4] cpufreq: qcom-nvmem: add support for IPQ8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v8 50/53] media: core: Free range of buffers
  • From: kernel test robot <lkp@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION df964ce9ef9fea10cf131bf6bad8658fde7956f6
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 06/11] firmware: qcom: scm: make qcom_scm_pas_init_image() use the SCM allocator
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [RFC PATCH 1/3] drm/msm/dpu: add support for MSM8953
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] drm/msm/dpu: add support for MSM8953
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH V6] PCI: qcom: Fix broken pcie enumeration for 2_3_3 configs ops
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 06/11] firmware: qcom: scm: make qcom_scm_pas_init_image() use the SCM allocator
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] ARM: kprobes: Explicitly assign register for local variables
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• Re: [PATCH 0/9] drm: Annotate structs with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v2 06/11] firmware: qcom: scm: make qcom_scm_pas_init_image() use the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 00/11] arm64: qcom: add and enable SHM Bridge support
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v2 06/11] firmware: qcom: scm: make qcom_scm_pas_init_image() use the SCM allocator
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v2 11/11] firmware: qcom: scm: enable SHM bridge
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 00/11] arm64: qcom: add and enable SHM Bridge support
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v8 5/5] drm/panfrost: Implement generic DRM object RSS reporting function
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v8 4/5] drm/drm_file: Add DRM obj's RSS reporting function for fdinfo
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v8 2/5] drm/panfrost: Add fdinfo support GPU load metrics
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v8 1/5] drm/panfrost: Add cycle count GPU register definitions
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v8 0/5] Add fdinfo support to Panfrost
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v8 3/5] drm/panfrost: Add fdinfo support for memory stats
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA with coherent SMMU
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: thermal: Add qcom,qmi-cooling yaml bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] cpufreq: qcom-nvmem: Enable virtual power domain devices
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 3/4] thermal: qcom: add qmi-cooling driver
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 3/4] thermal: qcom: add qmi-cooling driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH 3/4] thermal: qcom: add qmi-cooling driver
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 4/4] MAINTAINERS: Add entry for Qualcomm Cooling Driver
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 2/4] dt-bindings: thermal: Add qcom,qmi-cooling yaml bindings
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 1/4] remoteproc: qcom: probe all child devices
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH 0/4] thermal: Introduce Qualcomm Thermal Mitigation Device support
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sc8280xp-x13s: Use the correct DP PHY compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sc7280: Add Camera Control Interface busses
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA with coherent SMMU
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH v2 00/11] arm64: qcom: add and enable SHM Bridge support
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v2 2/2] bus: mhi: host: Take irqsave lock after TRE is generated
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sc7280: Add Camera Control Interface busses
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: interconnect: qcom: Introduce qcom,rpm-common
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/2] bus: mhi: host: Add spinlock to protect WP access when queueing TREs
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sc7280: Add Camera Control Interface busses
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 00/10] Fix up icc clock rate calculation on some platforms
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to GCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V4 3/4] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sc7280: Add Camera Control Interface busses
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SC7280 compatible
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SC7280 compatible
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sc7280: Add Camera Control Interface busses
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI busses
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sc8280xp: Use the correct AHB clock for DISPSS1
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/2] clk: qcom: gcc-sc8280xp: Don't keep display AHB clocks always-on
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/2] 8280 display ahb clk fixes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI busses
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sc7280: Add Camera Control Interface busses
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node
  • From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
• Re: [PATCH 3/8] arm64: dts: qcom: ipq5332: Add USB Super-Speed PHY node
  • From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
• Re: [PATCH V4 0/4] Add UFS host controller and Phy nodes for sc7280
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V4 4/4] dt-bindings: ufs: qcom: Align clk binding property for Qualcomm UFS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V4 3/4] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V4 2/4] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH V4 1/4] scsi: ufs: qcom: dt-bindings: Add SC7280 compatible string
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V4 2/4] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V4 3/4] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V4 0/4] Add UFS host controller and Phy nodes for sc7280
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V4 4/4] dt-bindings: ufs: qcom: Align clk binding property for Qualcomm UFS
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v8 00/53] Add DELETE_BUF ioctl
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH 1/4] cpufreq: qcom-nvmem: Enable virtual power domain devices
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable UFS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 0/2] Add partial initialization support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] power: supply: qcom_battmgr: fix enable request endianness
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v13 4/6] iommu/s390: Disable deferred flush for ISM devices
  • From: Matthew Rosato <mjrosato@xxxxxxxxxxxxx>
• Re: [PATCH 3/8] arm64: dts: qcom: ipq5332: Add USB Super-Speed PHY node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: sc7280: Add ports subnodes in usb/dp qmpphy node
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc7280: Add ports subnodes in usb/dp qmpphy node
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] mmc: core: Add partial initialization support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH V12 3/3] arm64: dts: ipq6018: add pwm node
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH V2 2/2] mmc: sdhci-msm: Enable MMC_CAP2_SLEEP_AWAKE for Qualcomm controllers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: sa8775p: Add RPMh sleep stats
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc7280: Add ports subnodes in usb/dp qmpphy node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 00/53] Add DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable venus node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] media: venus: core: Set up secure memory ranges for SC7280
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcm6490: Add qcm6490 dts file
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH V2 2/2] mmc: sdhci-msm: Enable MMC_CAP2_SLEEP_AWAKE for Qualcomm controllers
  • From: Sarthak Garg <quic_sartgarg@xxxxxxxxxxx>
• [PATCH V2 0/2] Add partial initialization support
  • From: Sarthak Garg <quic_sartgarg@xxxxxxxxxxx>
• [PATCH V2 1/2] mmc: core: Add partial initialization support
  • From: Sarthak Garg <quic_sartgarg@xxxxxxxxxxx>
• Re: [PATCH] power: supply: qcom_battmgr: fix battery_id type
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] power: supply: qcom_battmgr: fix enable request endianness
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH] power: supply: qcom_battmgr: fix battery_id type
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable UFS
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH V3 2/4] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH V5] nvmem: add explicit config option to read old syntax fixed OF cells
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH V12 2/3] dt-bindings: pwm: add IPQ6018 binding
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH 8/8] arm64: defconfig: Enable qcom USB UNIPHY driver
  • From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable venus node
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 7/8] arm64: dts: qcom: ipq5332: Enable USB Super-Speed PHY
  • From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
• [PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node
  • From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 5/8] arm64: dts: qcom: ipq5332: Add clocks for USB Super-Speed
  • From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
• [PATCH 4/8] dt-bindings: usb: dwc3: Add clocks on Qualcomm IPQ5332
  • From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
• [PATCH 3/8] arm64: dts: qcom: ipq5332: Add USB Super-Speed PHY node
  • From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
• [PATCH 2/8] phy: qcom: Introduce Super-Speed USB UNIPHY driver
  • From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
• [PATCH 1/8] dt-bindings: phy: qcom,uniphy-usb: Document qcom,uniphy-usb phy
  • From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
• [PATCH 0/8] Enable USB3 for Qualcomm IPQ5332
  • From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
• Re: [PATCH 1/3] media: venus: core: Set up secure memory ranges for SC7280
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable venus node
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 1/3] media: venus: core: Set up secure memory ranges for SC7280
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 0/3] Enable venus on Fairphone 5 / non-ChromeOS sc7280 venus support
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v1 04/10] clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: pm7250b: Use correct node name for gpios
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: mfd: qcom,spmi-pmic: Update gpio example
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 0/2] Small updates / fixups for PMIC spmi-gpio
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2 03/11] firmware: qcom: scm: switch to using the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sc7280: Add Camera Control Interface busses
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI busses
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SC7280 compatible
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 0/3] Add CCI support for SC7280
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH V12 2/3] dt-bindings: pwm: add IPQ6018 binding
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH v1 3/3] misc: fastrpc: Clean buffers on remote invocation failures
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 2/3] misc: fastrpc: Free DMA handles for RPC calls with no arguments
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 1/3] misc: fastrpc: Reset metadata buffer to avoid incorrect free
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 0/3] Add fixes for FastRPC driver
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v1 04/10] clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sc7280: Add ports subnodes in usb/dp qmpphy node
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Reset metadata buffer to avoid incorrect free
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v1 01/10] clk: qcom: clk-alpha-pll: introduce stromer plus ops
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Free DMA handles for RPC calls with no arguments
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 4/4] misc: fastrpc: Add support for users to clean up DSP user PD
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 3/4] misc: fastrpc: Add DSP PD notification support
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 2/4] misc: fastrpc: Add polling mode support for fastRPC driver
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 1/4] misc: fastrpc: Add early wakeup support for fastRPC driver
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 0/4] Add missing features to FastRPC driver
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v3] arm64: dts: qcom: sa8775p: Add RPMh sleep stats
  • From: Raghavendra Kakarla <quic_rkakarla@xxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: sa8775p: Add RPMh sleep stats
  • From: Raghavendra Kakarla <quic_rkakarla@xxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: sa8775p: Add RPMh sleep stats
  • From: Raghavendra Kakarla <quic_rkakarla@xxxxxxxxxxx>
• [PATCH v5 2/2] arm64: dts: qcom: sm8150: extend the size of the PDC resource
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH v5 1/2] irqchip/qcom-pdc: Add support for v3.2 HW
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v5 0/2] irqchip/qcom-pdc: support v3.2 HW
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 6/7] drm/msm/dp: add pm_runtime_force_suspend()/resume()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v5 4/7] leds: rgb: leds-qcom-lpg: Add support for single SDAM PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 6/7] leds: rgb: leds-qcom-lpg: Include support for PPG with dedicated LUT SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 1/7] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH] clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 00/21] dmaengine: Annotate with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] power: supply: qcom_battmgr: fix battery_id type
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 6/7] drm/msm/dp: add pm_runtime_force_suspend()/resume()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v7 02/33] xhci: add helper to stop endpoint and wait for completion
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v11 07/13] usb: dwc3: qcom: Add helper function to request threaded IRQ
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] PCI: qcom-ep: Make use of PCIE_SPEED2MBS_ENC() macro for encoding link speed
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: clocks: qcom,gcc-ipq8074: allow QMP PCI PHY PIPE clocks
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to GCC
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v4 4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v4 2/4] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v4 3/4] cpufreq: qcom-nvmem: add support for IPQ8064
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v4 1/4] cpufreq: qcom-nvmem: add support for IPQ8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v2 03/11] firmware: qcom: scm: switch to using the SCM allocator
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v2 11/11] firmware: qcom: scm: enable SHM bridge
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] PCI: qcom-ep: Make use of PCIE_SPEED2MBS_ENC() macro for encoding link speed
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 2/5] arm64: dts: qcom: sm8450: Add opp table support to PCIe
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 11/11] firmware: qcom: scm: enable SHM bridge
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v4 17/17] arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panel
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 02/11] firmware: qcom: scm: add a dedicated SCM memory allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 02/11] firmware: qcom: scm: add a dedicated SCM memory allocator
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH V5] nvmem: add explicit config option to read old syntax fixed OF cells
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH v2 11/11] firmware: qcom: scm: enable SHM bridge
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v2 10/11] firmware: qcom-scm: add support for SHM bridge operations
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v2 01/11] firmware: qcom: move Qualcomm code into its own directory
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH V3 4/4] dt-bindings: ufs: qcom: Align clk binding property for Qualcomm UFS
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: display/msm: sdm845-dpu: Describe SDM670
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: display: msm: Add SDM670 MDSS
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 0/2] Avoid spurious freezer wakeups
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: display/msm: dsi-controller-main: add SDM670 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 9/9] drm/v3d: Annotate struct v3d_perfmon with __counted_by
  • From: Maira Canal <mcanal@xxxxxxxxxx>
• [PATCH v13 1/6] iommu: Allow .iotlb_sync_map to fail and handle s390's -ENOMEM return
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v13 4/6] iommu/s390: Disable deferred flush for ISM devices
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v13 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v13 6/6] iommu/dma: Use a large flush queue and timeout for shadow_on_flush
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v13 2/6] s390/pci: prepare is_passed_through() for dma-iommu
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v13 3/6] s390/pci: Use dma-iommu layer
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v13 5/6] iommu/dma: Allow a single FQ in addition to per-CPU FQs
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH v6 36/36] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 35/36] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcm6490: Add qcm6490 dts file
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v7 02/33] xhci: add helper to stop endpoint and wait for completion
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: qcm6490: Add qcm6490 dts file
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm: qcom: Add QCM6490 IDP board
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH 0/2] Initial support for the QCM6490 IDP
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH v8 00/53] Add DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Clean buffers on remote invocation failures
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Reset metadata buffer to avoid incorrect free
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/5] misc: fastrpc: Add fastrpc multimode invoke request support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Free DMA handles for RPC calls with no arguments
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 00/53] Add DELETE_BUF ioctl
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v3 01/15] phy: Add HDMI configuration options
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: (subset) [PATCH 0/7] 8550 dma coherent and more
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 00/21] dmaengine: Annotate with __counted_by
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 6/6] drm/msm/mdss: Handle the reg bus ICC path
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 5/6] drm/msm/mdss: inline msm_mdss_icc_request_bw()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 4/6] drm/msm/mdss: Rename path references to mdp_path
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 3/6] drm/msm/mdss: switch mdss to use devm_of_icc_get()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: display/msm: Add reg bus and rotator interconnects
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 1/6] Linux 6.6-rc2
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 0/6] MDSS reg bus interconnect
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 1/5] drm/panfrost: Add cycle count GPU register definitions
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v7 3/5] drm/panfrost: Add fdinfo support for memory stats
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v7 5/5] drm/panfrost: Implement generic DRM object RSS reporting function
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v7 4/5] drm/drm_file: Add DRM obj's RSS reporting function for fdinfo
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v7 2/5] drm/panfrost: Add fdinfo support GPU load metrics
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v3 15/15] drm/msm/hdmi: drop old HDMI PHY code
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 13/15] drm/msm/hdmi: pair msm_hdmi_phy_powerup with msm_hdmi_phy_powerdown
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 12/15] drm/msm/hdmi: set infoframes on all pre_enable calls
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 14/15] drm/msm/hdmi: switch to generic PHY subsystem
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 11/15] drm/msm/hdmi: switch to atomic_pre_enable/post_disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 10/15] drm/msm/hdmi: correct indentation of HDMI bridge functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 09/15] drm/msm/hdmi: simplify extp clock handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 07/15] phy: qualcomm: add MSM8x60 HDMI PHY support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 08/15] drm/msm/hdmi: move the alt_iface clock to the hpd list
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 05/15] phy: qualcomm: add legacy HDMI PHY driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 06/15] phy: qualcomm: add MSM8974 HDMI PHY support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 04/15] phy: qcom-uniphy: add more registers from display PHYs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 02/15] phy: qualcomm: add QMP HDMI PHY driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 00/15] drm/msm/hdmi & phy: use generic PHY framework
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 03/15] phy: qcom: apq8064-sata: extract UNI PLL register defines
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 01/15] phy: Add HDMI configuration options
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 00/21] dmaengine: Annotate with __counted_by
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v6 29/36] ARM: dts: qcom: mdm9615: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 30/36] ARM: dts: qcom: msm8660: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 31/36] ARM: dts: qcom: msm8960: drop useless rpm regulators node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 32/36] ARM: dts: qcom: msm8974: move regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 33/36] ARM: dts: qcom: pm8921: Disable keypad by default
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 36/36] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 34/36] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 35/36] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 28/36] ARM: dts: qcom: apq8064: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 27/36] ARM: dts: qcom: pm8058: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 26/36] ARM: dts: qcom: pm8018: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 25/36] ARM: dts: qcom: pm8921: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 23/36] ARM: dts: qcom: pm8921: move reg property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 24/36] ARM: dts: qcom: pm8058: use defined IRQ flags
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 22/36] ARM: dts: qcom: pm8018: move reg property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 21/36] ARM: dts: qcom: pm8921: reorder nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 19/36] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 20/36] ARM: dts: qcom: pm8058: reorder nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 18/36] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 17/36] ARM: dts: qcom: apq8064: split PMICs to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 16/36] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 15/36] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 07/36] ARM: dts: qcom: strip prefix from PMIC files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 10/36] ARM: dts: qcom: msm8660: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 13/36] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 12/36] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 11/36] ARM: dts: qcom: msm8960: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 14/36] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 09/36] ARM: dts: qcom: mdm9615: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 08/36] ARM: dts: qcom: apq8064: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 06/36] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 05/36] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 03/36] ARM: dts: qcom: msm8960: introduce label for PMIC keypad
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 04/36] ARM: dts: qcom: msm8660-surf: use keypad label directly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 01/36] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 02/36] ARM: dts: qcom: apq8064: correct XOADC register address
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 00/36] ARM: dts: qcom: cleanup PMIC usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 3/3] phy: qcom-qmp-combo: use v6 registers in v6 regs layout
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 1/3] phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/3] phy: qcom-qmp-usb: move PCS v6 register to the proper header
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 0/3] phy: qcom-qmp-combo: correct USB v6 registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 01/33] xhci: add support to allocate several interrupters
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v2 10/11] firmware: qcom-scm: add support for SHM bridge operations
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 11/11] firmware: qcom: scm: enable SHM bridge
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 05/11] firmware: qcom: scm: make qcom_scm_ice_set_key() use the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFT PATCH v2 09/11] firmware: qcom: qseecom: convert to using the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 07/11] firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 02/11] firmware: qcom: scm: add a dedicated SCM memory allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 01/11] firmware: qcom: move Qualcomm code into its own directory
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 03/11] firmware: qcom: scm: switch to using the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFT PATCH v2 08/11] firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 06/11] firmware: qcom: scm: make qcom_scm_pas_init_image() use the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 04/11] firmware: qcom: scm: make qcom_scm_assign_mem() use the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 00/11] arm64: qcom: add and enable SHM Bridge support
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 00/59] dma: Convert to platform remove callback returning void
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 00/59] dma: Convert to platform remove callback returning void
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: opp: opp-v2-kryo-cpu: Allow opp-peak-kBps
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: cpufreq: cpufreq-qcom-hw: add SDM670 compatible
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 00/31] thermal: Convert to platform remove callback returning void
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: cpufreq: qcom-nvmem: Document MSM8909
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 2/4] cpufreq: dt: platdev: Add MSM8909 to blocklist
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v10 10/13] coresight-tpdm: Add nodes to configure pattern match output
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v5 5/5] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v10 08/13] coresight-tpdm: Add node to set dsb programming mode
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 13/13] coresight-tpdm: Add nodes for dsb msr support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 07/13] coresight-tpdm: Add nodes to set trigger timestamp and type
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 11/13] coresight-tpdm: Add nodes for timestamp request
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 09/13] coresight-tpdm: Add nodes for dsb edge control
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 12/13] dt-bindings: arm: Add support for DSB MSR register
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 06/13] coresight-tpdm: Add reset node to TPDM node
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 05/13] coresight-tpdm: Initialize DSB subunit configuration
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 03/13] coresight-tpdm: Introduce TPDM subtype to TPDM driver
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 01/13] coresight-tpdm: Remove the unnecessary lock
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 00/13] Add support to configure TPDM DSB subunit
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 04/13] coresight-tpda: Add DSB dataset support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v10 02/13] dt-bindings: arm: Add support for DSB element size
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH 00/40] soc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/5] opp: Add dev_pm_opp_find_level_floor()
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v5 3/5] opp: Add dev_pm_opp_find_level_floor()
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v6.1] media: qcom: camss: Comment CSID dt_id field
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] ARM: kprobes: Explicitly assign register for local variables
  • From: "Aiqun(Maria) Yu" <quic_aiquny@xxxxxxxxxxx>
• Re: [PATCH] ARM: kprobes: Explicitly assign register for local variables
  • From: "Aiqun(Maria) Yu" <quic_aiquny@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: Switch to EXPORT_SYMBOL_GPL()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: llcc: Handle a second device without data corruption
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/3] soc: qcom: rmtfs: Support dynamic allocation
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: apq8016-sbc: Add missing ADV7533 regulators
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: apq8026-samsung-matisse-wifi: Fix inverted hall sensor
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] Add rpm-master-stats nodes for MSM8226 and MSM8974
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3] firmware: qcom_scm: use 64-bit calling convention only when client is 64-bit
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [RESEND PATCH 1/4] ARM: dts: qcom: apq8064: drop incorrect regulator-type
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [RESEND PATCH 1/2] ARM: dts: qcom: apq8064: drop label property from DSI
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: smem: Annotate struct qcom_smem with __counted_by
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 00/40] soc: Convert to platform remove callback returning void
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3 1/1] scripts: Add add-maintainer.py
  • From: Guru Das Srinagesh <quic_gurus@xxxxxxxxxxx>
• Re: [PATCH v3 1/1] scripts: Add add-maintainer.py
  • From: Guru Das Srinagesh <quic_gurus@xxxxxxxxxxx>
• Re: [PATCH v3 6/7] drm/msm/dp: add pm_runtime_force_suspend()/resume()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 6/7] drm/msm/dp: add pm_runtime_force_suspend()/resume()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v4 7/8] drm/msm/dp: add pm_runtime_force_suspend()/resume()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 8/8] drm/msm/dp: move of_dp_aux_populate_bus() to eDP probe()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 5/8] drm/msm/dp: incorporate pm_runtime framework into DP driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 6/7] drm/msm/dp: add pm_runtime_force_suspend()/resume()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v7 4/5] drm/drm_file: Add DRM obj's RSS reporting function for fdinfo
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v7 2/5] drm/panfrost: Add fdinfo support GPU load metrics
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v7 5/5] drm/panfrost: Implement generic DRM object RSS reporting function
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v7 1/5] drm/panfrost: Add cycle count GPU register definitions
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v7 3/5] drm/panfrost: Add fdinfo support for memory stats
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v7 0/5] Add fdinfo support to Panfrost
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• Re: [PATCH v4 4/8] drm/msm/dp: move parser->parse() and dp_power_client_init() to probe
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 4/8] drm/msm/dp: move parser->parse() and dp_power_client_init() to probe
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/8] drm/msm/dp: rename is_connected with link_ready
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 0/8] incorporate pm runtime framework and eDP clean up
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/8] drm/msm/dp: tie dp_display_irq_handler() with dp driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 8/8] drm/msm/dp: move of_dp_aux_populate_bus() to eDP probe()
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v4 1/8] drm/msm/dp: tie dp_display_irq_handler() with dp driver
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v4 7/8] drm/msm/dp: add pm_runtime_force_suspend()/resume()
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v4 4/8] drm/msm/dp: move parser->parse() and dp_power_client_init() to probe
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v4 6/8] drm/msm/dp: delete EV_HPD_INIT_SETUP
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v4 2/8] drm/msm/dp: rename is_connected with link_ready
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v4 3/8] drm/msm/dp: use drm_bridge_hpd_notify() to report HPD status changes
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v4 5/8] drm/msm/dp: incorporate pm_runtime framework into DP driver
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v4 0/8] incorporate pm runtime framework and eDP clean up
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH V5] nvmem: add explicit config option to read old syntax fixed OF cells
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH v12 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Matthew Rosato <mjrosato@xxxxxxxxxxxxx>
• Re: [PATCH v7 29/33] ASoC: qcom: qdsp6: Add SND kcontrol for fetching offload status
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v7 09/33] ASoC: qdsp6: q6afe: Increase APR timeout
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v7 06/33] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 00/31] thermal: Convert to platform remove callback returning void
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH 00/31] thermal: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 19/31] thermal: tsens: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] PCI: qcom-ep: Make use of PCIE_SPEED2MBS_ENC() macro for encoding link speed
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 18030226a48de1fbfabf4ae16aaa2695a484254f
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v8 14/53] media: test-drivers: vivid: Increase max supported buffers for capture queues
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH v12 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v12 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH v7 00/33] Introduce QC USB SND audio offloading support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/3] PCI: tegra194: Use Mbps_to_icc() macro for setting icc speed
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v3 2/3] PCI: qcom-ep: Make use of PCIE_SPEED2MBS_ENC() macro for encoding link speed
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v3 1/3] PCI: qcom: Make use of PCIE_SPEED2MBS_ENC() macro for encoding link speed
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v8 23/53] media: dvb-frontends: rtl2832_srd: Use queue min_buffers_needed field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 47/53] media: cedrus: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 17/53] media: verisilicon: Store chroma and motion vectors offset
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 51/53] media: v4l2: Add DELETE_BUFS ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 21/53] media: core: Add helper to get queue number of buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 39/53] media: usb: cx231xx: Set min_buffers_needed to CX231XX_MIN_BUF
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 24/53] media: video-i2c: Set min_buffers_needed to 2
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 34/53] media: renesas: Set min_buffers_needed to 16
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 41/53] media: usb: usbtv: Set min_buffers_needed to 2
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 35/53] media: ti: Use queue min_buffers_needed field to set the min number of buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 45/53] touchscreen: sur40: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 25/53] media: pci: cx18: Set correct value to min_buffers_needed field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 26/53] media: pci: dt3155: Remove useless check
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 29/53] media: pci: tw686x: Set min_buffers_needed to 3
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 28/53] media: pci: tw68: Stop direct calls to queue num_buffers field
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 18/53] media: verisilicon: g2: Use common helpers to compute chroma and mv offsets
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v8 11/53] media: videobuf2: Access vb2_queue bufs array through helper functions
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>