The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@xxxxxxxxxxxxxxx # 5.10
Cc: Jonathan Marek <jonathan@xxxxxxxx>
Cc: Jack Pham <quic_jackp@xxxxxxxxxxx>
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 97623af13464..3e7048d8ac55 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3567,8 +3567,8 @@ usb_1: usb@a6f8800 {
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
+ <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
@@ -3620,8 +3620,8 @@ usb_2: usb@a8f8800 {
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 490 IRQ_TYPE_EDGE_BOTH>,
+ <GIC_SPI 491 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
--
2.41.0
