Re: [PATCH] drm/msm/dpu: Fix encoder CRC to account for CTM enablement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 11/21/2023 4:27 PM, Rob Clark wrote:
On Tue, Nov 21, 2023 at 4:41 PM Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:



On 10/24/2023 12:01 PM, Abhinav Kumar wrote:


On 10/23/2023 4:03 PM, Dmitry Baryshkov wrote:
On Tue, 24 Oct 2023 at 01:36, Rob Clark <robdclark@xxxxxxxxx> wrote:

On Mon, Oct 23, 2023 at 3:30 PM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:

On Tue, 24 Oct 2023 at 01:12, Rob Clark <robdclark@xxxxxxxxx> wrote:

From: Rob Clark <robdclark@xxxxxxxxxxxx>

Seems like we need to pick INPUT_SEL=1 when CTM is enabled.  But not
otherwise.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
---

I cannot find anything in the docs which suggest this solution is correct.

Different blocks in the DPU pipeline have their own CRC (MISR) registers
like LM, intf etc.

We dont need to change INPUT_SEL to tell DPU from which pipeline to take
the CRC from as each of them have their own registers.

INPUT_SEL is controlling whether the CRC needs to be calculated over the
entire display timings or only the active pixels. I am unable to tell at
the moment why this is making a difference in this use-case.

Since I am unable to find any documentation proving this solution is
correct so far, unfortunately I would hold this back till then.

We will investigate this issue and report our findings on this thread on
how to proceed.


Alright, we debugged and also found some more answers.

The correct solution is indeed to set INPUT_SEL = 1 but let me explain
why and what should be the correct way.

INPUT_SEL was indeed telling whether to compute CRC over active pixels
or active pixels + timings like I wrote before but this behavior changed
since some chipsets.

Now, INPUT_SEL = 0 means compute CRC *only* over timings and not the
active area (and not display + timings like before) and like mentioned
before this has nothing to do with what is the input to the CRC. Not
covering the active area will not change the CRC at all as Rob reported
but its not specific to CTM.

Which means we should have been setting INPUT_SEL=1 whenever we use INTF
CRC irrespective of whether CTM is used or not.

What this also means is INTF CRC was not working correctly at all so far
irrespecive of CTM or not because it was always computing CRC only on
the timings (non-active area).

This was not caught so far because it looks like IGT's
kms_pipe_crc_basic test which was used to validate this only compares
CRC between two frames of the same content to match if they were equal
and not changing contents and comparing like kms_plane does. It will
pass as CRC would not have changed.

Now coming to the fix, the reset value of this register INTF_MISR_CTRL
already sets the INPUT_SEL bit (or unsets it) correctly based on
whichever DPU version is used so we should just change the
dpu_hw_setup_misr() to a read on the register followed by ORing the
required bits without touching INPUT_SEL and write.

That will address this issue and also cover version control since the
expected value of this bit has changed across DPU revisions.

Ok, thanks for following up on this.  Mind posting a patch to
supersede this one?

BR,
-R


Yup, we will.

Thanks

Abhinav
   drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    | 2 +-
   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 4 ++--
   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 3 ++-
   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 4 ++--
   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h | 2 +-
   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c   | 2 +-
   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c | 5 ++++-
   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h | 3 ++-
   8 files changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 2b83a13b3aa9..d93a92ffd5df 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -134,7 +134,7 @@ static void dpu_crtc_setup_encoder_misr(struct
drm_crtc *crtc)
          struct drm_encoder *drm_enc;

          drm_for_each_encoder_mask(drm_enc, crtc->dev,
crtc->state->encoder_mask)
-               dpu_encoder_setup_misr(drm_enc);
+               dpu_encoder_setup_misr(drm_enc, !!crtc->state->ctm);
   }

   static int dpu_crtc_set_crc_source(struct drm_crtc *crtc, const
char *src_name)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index b0a7908418ed..12ee7acb5ea6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -241,7 +241,7 @@ int dpu_encoder_get_crc_values_cnt(const struct
drm_encoder *drm_enc)
          return num_intf;
   }

-void dpu_encoder_setup_misr(const struct drm_encoder *drm_enc)
+void dpu_encoder_setup_misr(const struct drm_encoder *drm_enc,
bool has_ctm)
   {
          struct dpu_encoder_virt *dpu_enc;

@@ -255,7 +255,7 @@ void dpu_encoder_setup_misr(const struct
drm_encoder *drm_enc)
                  if (!phys->hw_intf || !phys->hw_intf->ops.setup_misr)
                          continue;

-               phys->hw_intf->ops.setup_misr(phys->hw_intf, true, 1);
+               phys->hw_intf->ops.setup_misr(phys->hw_intf, true,
1, has_ctm);
          }
   }

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
index 4c05fd5e9ed1..510783b2fb24 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
@@ -169,8 +169,9 @@ int dpu_encoder_get_crc_values_cnt(const struct
drm_encoder *drm_enc);
   /**
    * dpu_encoder_setup_misr - enable misr calculations
    * @drm_enc:    Pointer to previously created drm encoder structure
+ * @has_ctm:    Is CTM enabled
    */
-void dpu_encoder_setup_misr(const struct drm_encoder *drm_encoder);
+void dpu_encoder_setup_misr(const struct drm_encoder *drm_encoder,
bool has_ctm);

   /**
    * dpu_encoder_get_crc - get the crc value from interface blocks
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index e8b8908d3e12..cb06f80cc671 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -318,9 +318,9 @@ static u32 dpu_hw_intf_get_line_count(struct
dpu_hw_intf *intf)
          return DPU_REG_READ(c, INTF_LINE_COUNT);
   }

-static void dpu_hw_intf_setup_misr(struct dpu_hw_intf *intf, bool
enable, u32 frame_count)
+static void dpu_hw_intf_setup_misr(struct dpu_hw_intf *intf, bool
enable, u32 frame_count, bool has_ctm)
   {
-       dpu_hw_setup_misr(&intf->hw, INTF_MISR_CTRL, enable,
frame_count);
+       dpu_hw_setup_misr(&intf->hw, INTF_MISR_CTRL, enable,
frame_count, has_ctm);

I'm not sure about the dpu_encoder and dpu_hw_intf interfaces. But
dpu_hw_setup_misr definitely needs the `u8 input_sel` parameter
instead of `bool has_ctm`.

That seems a bit premature without knowing what the other values are.
(And I also question a bit the whole abstraction layer thing if it is
taking directly register bitfield enum's..)

dpu_hw_intf and especially dpu_hw_util are not real abstractions. I
always viewed them as useful low-level helpers.

I think that has_ctm is valid at the dpu_encoder level, which selects
which input to use. on the lower levels has_ctm doesn't make sense.
IOW dpu_hw_setup_misr can be used to setup MISR for other blocks,
where CTM doesn't exist.


BR,
-R

Most likely, I'd use u8 for dpu_hw_intf operation too.

Could you please adjust?

   }

   static int dpu_hw_intf_collect_misr(struct dpu_hw_intf *intf, u32
*misr_value)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
index c539025c418b..95aafc4cf58e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
@@ -95,7 +95,7 @@ struct dpu_hw_intf_ops {

          void (*bind_pingpong_blk)(struct dpu_hw_intf *intf,
                          const enum dpu_pingpong pp);
-       void (*setup_misr)(struct dpu_hw_intf *intf, bool enable,
u32 frame_count);
+       void (*setup_misr)(struct dpu_hw_intf *intf, bool enable,
u32 frame_count, bool has_ctm);
          int (*collect_misr)(struct dpu_hw_intf *intf, u32
*misr_value);

          // Tearcheck on INTF since DPU 5.0.0
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
index d1c3bd8379ea..2efe29396c6a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
@@ -83,7 +83,7 @@ static void dpu_hw_lm_setup_border_color(struct
dpu_hw_mixer *ctx,

   static void dpu_hw_lm_setup_misr(struct dpu_hw_mixer *ctx, bool
enable, u32 frame_count)
   {
-       dpu_hw_setup_misr(&ctx->hw, LM_MISR_CTRL, enable,
frame_count);
+       dpu_hw_setup_misr(&ctx->hw, LM_MISR_CTRL, enable,
frame_count, false);
   }

   static int dpu_hw_lm_collect_misr(struct dpu_hw_mixer *ctx, u32
*misr_value)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
index 9d2273fd2fed..528b8439209f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
@@ -483,7 +483,7 @@ void _dpu_hw_setup_qos_lut(struct
dpu_hw_blk_reg_map *c, u32 offset,

   void dpu_hw_setup_misr(struct dpu_hw_blk_reg_map *c,
                  u32 misr_ctrl_offset,
-               bool enable, u32 frame_count)
+               bool enable, u32 frame_count, bool has_ctm)
   {
          u32 config = 0;

@@ -496,6 +496,9 @@ void dpu_hw_setup_misr(struct
dpu_hw_blk_reg_map *c,
                  config = (frame_count & MISR_FRAME_COUNT_MASK) |
                          MISR_CTRL_ENABLE | MISR_CTRL_FREE_RUN_MASK;

+               if (!has_ctm)
+                       config |= 1 << 24;

Please define MISR_CTRL_INPUT_SEL instead.

+
                  DPU_REG_WRITE(c, misr_ctrl_offset, config);
          } else {
                  DPU_REG_WRITE(c, misr_ctrl_offset, 0);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
index 1f6079f47071..e42d9d00e40e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
@@ -360,7 +360,8 @@ void _dpu_hw_setup_qos_lut(struct
dpu_hw_blk_reg_map *c, u32 offset,
   void dpu_hw_setup_misr(struct dpu_hw_blk_reg_map *c,
                  u32 misr_ctrl_offset,
                  bool enable,
-               u32 frame_count);
+               u32 frame_count,
+               bool has_ctm);

   int dpu_hw_collect_misr(struct dpu_hw_blk_reg_map *c,
                  u32 misr_ctrl_offset,
--
2.41.0



--
With best wishes
Dmitry







[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux