On Wed, 22 Nov 2023 at 09:11, Can Guo <quic_cang@xxxxxxxxxxx> wrote:
>
> The registers, which are being touched in current SM8550 UFS PHY settings,
> and the values being programmed are mainly the ones working for HS-G4 mode,
> meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings.
> However, even consider HS-G4 mode only, some of them are incorrect and some
> are missing. Rectify the HS-G4 PHY settings by strictly aligning with the
> SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings.
>
> Fixes: 1679bfef906f ("phy: qcom-qmp-ufs: Add SM8550 support")
> Signed-off-by: Can Guo <quic_cang@xxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
> .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 3 +++
> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 28 +++++++++++++++-------
> 2 files changed, 22 insertions(+), 9 deletions(-)
--
With best wishes
Dmitry
