The Qualcomm glue driver is overriding the interrupt trigger types
defined by firmware when requesting the wakeup interrupts during probe.
This can lead to a failure to map the DP/DM wakeup interrupts after a
probe deferral as the firmware defined trigger types do not match the
type used for the initial mapping:
irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!
irq: type mismatch, failed to map hwirq-15 for interrupt-controller@b220000!
Fix this by not overriding the firmware provided trigger types when
requesting the wakeup interrupts.
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Cc: stable@xxxxxxxxxxxxxxx # 4.18
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
drivers/usb/dwc3/dwc3-qcom.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 10fb481d943b..82544374110b 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -549,7 +549,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
irq_set_status_flags(irq, IRQ_NOAUTOEN);
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
qcom_dwc3_resume_irq,
- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ IRQF_ONESHOT,
"qcom_dwc3 HS", qcom);
if (ret) {
dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
@@ -564,7 +564,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
irq_set_status_flags(irq, IRQ_NOAUTOEN);
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
qcom_dwc3_resume_irq,
- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ IRQF_ONESHOT,
"qcom_dwc3 DP_HS", qcom);
if (ret) {
dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
@@ -579,7 +579,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
irq_set_status_flags(irq, IRQ_NOAUTOEN);
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
qcom_dwc3_resume_irq,
- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ IRQF_ONESHOT,
"qcom_dwc3 DM_HS", qcom);
if (ret) {
dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
@@ -594,7 +594,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
irq_set_status_flags(irq, IRQ_NOAUTOEN);
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
qcom_dwc3_resume_irq,
- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ IRQF_ONESHOT,
"qcom_dwc3 SS", qcom);
if (ret) {
dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
--
2.41.0
