Linux Intel Graphics

• Thread Index

• ✓ Fi.CI.BAT: success for drm/i915: Support FP16 compressed formats on MTL (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Support FP16 compressed formats on MTL (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for drm/i915/lnl: Assign correct phys (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] drm/i915/dsi: Replace poking of CHV GPIOs behind the driver's back
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [RFC 8/8] cgroup/drm: Expose GPU utilisation
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [RFC 1/8] cgroup: Add the DRM cgroup controller
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [RFC 7/8] drm/i915: Implement cgroup controller over budget throttling
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [RFC 5/8] drm/cgroup: Only track clients which are providing drm_cgroup_ops
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [RFC 4/8] drm/cgroup: Add over budget signalling callback
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [RFC 6/8] cgroup/drm: Introduce weight based drm cgroup control
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [RFC 2/8] drm/cgroup: Track DRM clients per cgroup
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [RFC 3/8] drm/cgroup: Add ability to query drm cgroup GPU time
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [RFC v6 0/8] DRM scheduling cgroup controller
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [PATCH v2 2/7] drm/i915/dsi: Get rid of redundant 'else'
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [rft, PATCH v2 0/7] drm/i915/dsi: 2nd attempt to get rid of IOSF GPIO
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 5/7] drm/i915/dsi: Replace poking of VLV GPIOs behind the driver's back
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [rft, PATCH v1 0/2] drm/i915/dsi: An attempt to get rid of IOSF GPIO on VLV
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 7/7] drm/i915/iosf: Drop unused APIs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 6/7] drm/i915/dsi: Replace poking of CHV GPIOs behind the driver's back
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 4/7] drm/i915/dsi: Extract common soc_gpio_exec() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/7] drm/i915/dsi: Replace check with a (missing) MIPI sequence name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/7] drm/i915/dsi: Replace while(1) with one with clear exit condition
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/mcr: Hold GT forcewake during steering operations
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/mcr: Hold GT forcewake during steering operations
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH] drm/i915/adl: Initialize all GV points as restricted in bw_state
  • From: "Lisovskiy, Stanislav" <stanislav.lisovskiy@xxxxxxxxx>
• Re: [PATCH] drm/i915/adl: Initialize all GV points as restricted in bw_state
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/pmu: Check if pmu is closed before stopping event (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Sean Young <sean@xxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/mst: MST modeset sequence fixes (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/mst: MST modeset sequence fixes (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] drm/i915: move Makefile display debugfs files next to display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 1/2] drm/i915: fix Makefile sort and indent
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drm/i915/adl: Initialize all GV points as restricted in bw_state
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] debugobjects: stop accessing objects after releasing spinlock
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v4 21/23] drm/i915/display: Move verbose_state_checks under display
  • From: "Coelho, Luciano" <luciano.coelho@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/adl: Initialize all GV points as restricted in bw_state
  • From: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
• Re: [PATCH v2 24/24] drm/i915/display: Use same permissions for enable_sagv as for rest
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH v2] drm/i915/pmu: add perf_event_to_pmu() helper
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v4 12/23] drm/i915/display: Move disable_power_well module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• Re: [PATCH 2/3] drm/i915/pmu: add event_to_pmu() helper
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v4 22/23] drm/i915/display: Move nuclear_pageflip under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 23/23] drm/i915/display: Move enable_dp_mst under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 19/23] drm/i915/display: Move disable_display parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 20/23] drm/i915/display: Use device parameters instead of module in I915_STATE_WARN
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 21/23] drm/i915/display: Move verbose_state_checks under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 16/23] drm/i915/display: Move enable_dpcd_backlight module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 18/23] drm/i915/display: Move force_reset_modeset_test parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 09/23] drm/i915/display: Move enable_dc module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 14/23] drm/i915/display: Move invert_brightness module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 17/23] drm/i915/display: Move load_detect_test parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 15/23] drm/i915/display: Move edp_vswing module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 13/23] drm/i915/display: Move enable_ips module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 10/23] drm/i915/display: Move enable_dpt module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 11/23] drm/i915/display: Move enable_sagv module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 07/23] drm/i915/display: Move panel_use_ssc module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 08/23] drm/i915/display: Move vbt_sdvo_panel_type module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 06/23] drm/i915/display: Move lvds_channel_mode module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 00/23] Framework for display parameters
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 05/23] drm/i915/display: Move vbt_firmware module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 04/23] drm/i915/display: Move psr related module parameters under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 03/23] drm/i915/display: Move enable_fbc module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 02/23] drm/i915/display: Dump also display parameters
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v4 01/23] drm/i915/display: Add framework to add parameters specific to display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• Re: [PATCH 08/29] drm/dp: Add helpers to calculate the link BW overhead
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/3] drm/i915/pmu: rearrange hrtimer pointer chasing
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drm/i915/pmu: add event_to_pmu() helper
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] drm/i915/pmu: add pmu_to_i915() helper
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/gt: Use proper priority enum instead of 0
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/pmu: Check if pmu is closed before stopping event
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 21/24] drm/i915/display: Move verbose_state_checks under display
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/mtl: Add Wa_14019821291 (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 24/24] drm/i915/display: Use same permissions for enable_sagv as for rest
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 21/24] drm/i915/display: Move verbose_state_checks under display
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drm/i915/pmu: Check if pmu is closed before stopping event
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/mtl: Add Wa_14019821291 (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/mcr: Hold GT forcewake during steering operations
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [RFC 0/3] drm/i915: split display from drm_i915_private and i915_drv.h
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/mcr: Hold GT forcewake during steering operations (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 13/23] drm/i915/display: Move enable_ips module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v4 4/4] drm/i915: Set copy engine arbitration for Wa_16018031267 / Wa_16018063123
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 04/23] drm/i915/display: Move psr related module parameters under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v4 3/4] drm/i915/gt: add selftest to exercise WABB
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] drm/i915: Add WABB blit for Wa_16018031267 / Wa_16018063123
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 24/24] drm/i915/display: Use same permissions for enable_sagv as for rest
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 21/24] drm/i915/display: Move verbose_state_checks under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Flush WC GGTT only on required platforms (rev10)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 23/23] drm/i915/display: Move enable_dp_mst under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 18/23] drm/i915/display: Move force_reset_modeset_test parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 22/23] drm/i915/display: Move nuclear_pageflip under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 17/23] drm/i915/display: Move load_detect_test parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 20/23] drm/i915/display: Use device parameters instead of module in I915_STATE_WARN
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 19/23] drm/i915/display: Move disable_display parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 21/23] drm/i915/display: Move verbose_state_checks under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 16/23] drm/i915/display: Move enable_dpcd_backlight module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 15/23] drm/i915/display: Move edp_vswing module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 14/23] drm/i915/display: Move invert_brightness module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 12/23] drm/i915/display: Move disable_power_well module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 11/23] drm/i915/display: Move enable_sagv module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 13/23] drm/i915/display: Move enable_ips module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 10/23] drm/i915/display: Move enable_dpt module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 08/23] drm/i915/display: Move vbt_sdvo_panel_type module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 09/23] drm/i915/display: Move enable_dc module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 06/23] drm/i915/display: Move lvds_channel_mode module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 07/23] drm/i915/display: Move panel_use_ssc module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 05/23] drm/i915/display: Move vbt_firmware module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 04/23] drm/i915/display: Move psr related module parameters under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 03/23] drm/i915/display: Move enable_fbc module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 01/23] drm/i915/display: Add framework to add parameters specific to display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 02/23] drm/i915/display: Dump also display parameters
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v3 00/23] Framework for display parameters
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 08/29] drm/dp: Add helpers to calculate the link BW overhead
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v2 23/29] drm/i915/dp_mst: Enable DSC passthrough
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v2 22/29] drm/i915/dp: Enable DSC via the connector decompression AUX
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v2 07/29] drm/dp_mst: Add HBLANK expansion quirk for Synaptics MST hubs
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH v4 1/4] drm/i915: Reserve some kernel space per vm
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 24/24] drm/i915/display: Use same permissions for enable_sagv as for rest
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• Re: [PATCH] drm/i915/mcr: Hold GT forcewake during steering operations
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 21/24] drm/i915/display: Move verbose_state_checks under display
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• Re: [PATCH v4 3/4] drm/i915/gt: add selftest to exercise WABB
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] drm/i915: Set copy engine arbitration for Wa_16018031267 / Wa_16018063123
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] drm/i915: Reserve some kernel space per vm
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH 08/29] drm/dp: Add helpers to calculate the link BW overhead
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 29/29] drm/i915: Query compressed bpp properly using correct DPCD and DP Spec info
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 09/29] drm/i915/dp_mst: Enable FEC early once it's known DSC is needed
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 28/29] drm/i915/dp_mst: Check BW limitations only after all streams are computed
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 17/29] drm/i915/dp: Rename intel_ddi_disable_fec_state() to intel_ddi_disable_fec()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 27/29] drm/i915/dp_mst: Improve BW sharing between MST streams
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 25/29] drm/i915: Factor out function to clear pipe update flags
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 26/29] drm/i915/dp_mst: Force modeset CRTC if DSC toggling requires it
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 21/29] drm/i915/dp_mst: Enable decompression in the sink from the MST encoder hooks
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 20/29] drm/i915/dp_mst: Handle the Synaptics HBlank expansion quirk
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 23/29] drm/i915/dp_mst: Enable DSC passthrough
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 16/29] drm/i915/dp_mst: Add missing DSC compression disabling
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 19/29] drm/i915/dp: Disable FEC ready flag in the sink
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 14/29] drm/i915/dp_mst: Program the DSC PPS SDP for each stream
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 24/29] drm/i915/dp_mst: Enable MST DSC decompression for all streams
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 15/29] drm/i915/dp: Make sure the DSC PPS SDP is disabled whenever DSC is disabled
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 22/29] drm/i915/dp: Enable DSC via the connector decompression AUX
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 18/29] drm/i915/dp: Wait for FEC detected status in the sink
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 13/29] drm/i915/dp_mst: Add atomic state for all streams on pre-tgl platforms
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 12/29] drm/i915/dp_mst: Account for FEC and DSC overhead during BW allocation
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 11/29] drm/i915/dp: Pass actual BW overhead to m_n calculation
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 10/29] drm/i915/dp: Specify the FEC overhead as an increment vs. a remainder
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 05/29] drm/dp_mst: Allow DSC in any Synaptics last branch device
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 08/29] drm/dp: Add helpers to calculate the link BW overhead
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 04/29] drm/dp_mst: Swap the order of checking root vs. non-root port BW limitations
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 07/29] drm/dp_mst: Add HBLANK expansion quirk for Synaptics MST hubs
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 06/29] drm/dp: Add DP_HBLANK_EXPANSION_CAPABLE and DSC_PASSTHROUGH_EN DPCD flags
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 02/29] drm/dp_mst: Add helper to determine if an MST port is downstream of another port
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 03/29] drm/dp_mst: Factor out a helper to check the atomic state of a topology manager
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 01/29] drm/dp_mst: Fix fractional DSC bpp handling
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH 00/29] drm/i915: Improve BW management on MST links
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v3 05/10] drm/ci: clean up xfails (specially flakes list)
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• [PATCH v4 3/4] drm/i915/gt: add selftest to exercise WABB
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v4 2/4] drm/i915: Add WABB blit for Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v4 4/4] drm/i915: Set copy engine arbitration for Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v4 1/4] drm/i915: Reserve some kernel space per vm
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v4 0/4] Apply Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH v3 3/4] drm/i915: Add WABB blit for Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH v2] debugobjects: stop accessing objects after releasing spinlock
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] drm/i915: Set copy engine arbitration for Wa_16018031267 / Wa_16018063123
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/lnl: Fix check for TC phy
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH v3 4/4] drm/i915: Set copy engine arbitration for Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH] drm/i915/pmu: Check is pmu is closed before stopping event
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [PATCH 2/3] drm/i915/pmu: add event_to_pmu() helper
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 3/3] drm/i915/pmu: rearrange hrtimer pointer chasing
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 1/3] drm/i915/pmu: add pmu_to_i915() helper
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v3 1/4] drm/i915: Enable NULL PTE support for vm scratch
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH v2 24/24] drm/i915/display: Use same permissions for enable_sagv as for rest
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 23/24] drm/i915/display: Move enable_dp_mst under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 22/24] drm/i915/display: Move nuclear_pageflip under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 21/24] drm/i915/display: Move verbose_state_checks under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 20/24] drm/i915/display: Use device parameters instead of module in I915_STATE_WARN
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 19/24] drm/i915/display: Move disable_display parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 18/24] drm/i915/display: Move force_reset_modeset_test parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 17/24] drm/i915/display: Move load_detect_test parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 16/24] drm/i915/display: Move enable_dpcd_backlightmodule parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 15/24] drm/i915/display: Move edp_vswing module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v2 14/24] drm/i915/display: Move invert_brightness module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 13/24] drm/i915/display: Move enable_ips module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 12/24] drm/i915/display: Move disable_power_well module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 11/24] drm/i915/display: Move enable_sagv module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 10/24] drm/i915/display: Move enable_dpt module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 09/24] drm/i915/display: Move enable_dc module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 08/24] drm/i915/display: Move vbt_sdvo_panel_type module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 07/24] drm/i915/display: Move panel_use_ssc module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 06/24] drm/i915/display: Move lvds_channel_mode module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: avoid stringop-overflow warning
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] drm/i915: Enable NULL PTE support for vm scratch
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Apply Wa_16018031267 / Wa_16018063123
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/24] drm/i915/display: Move vbt_firmware module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH] drm/i915: stop including i915_utils.h from intel_runtime_pm.h
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH] drm/i915/gt: Use proper priority enum instead of 0
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxx>
• Re: [PATCH v3 2/4] drm/i915: Reserve some kernel space per vm
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH v3 0/4] Apply Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH v2 04/24] drm/i915/display: Move psr related module parameters under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 03/24] drm/i915/display: Move enable_fbc module parameter under display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [PATCH v3] drm/i915: handle uncore spinlock when not available
  • From: Luca Coelho <luciano.coelho@xxxxxxxxx>
• Re: [Intel-xe] [PATCH v2] drm/i915: handle uncore spinlock when not available
  • From: "Coelho, Luciano" <luciano.coelho@xxxxxxxxx>
• Re: [PATCH v2] drm/i915: handle uncore spinlock when not available
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915: handle uncore spinlock when not available
  • From: "Coelho, Luciano" <luciano.coelho@xxxxxxxxx>
• Re: [PATCH v3 4/4] drm/i915: Set copy engine arbitration for Wa_16018031267 / Wa_16018063123
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drm/i915/aux: add separate register macros and functions for VLV/CHV
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drm/i915: drop gt/intel_gt.h include from skl_universal_plane.c
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] drm/i915: Support FP16 compressed formats on MTL
  • From: "Lobo, Melanie" <melanie.lobo@xxxxxxxxx>
• [PATCH] drm/i915: Support FP16 compressed formats on MTL
  • From: Melanie Lobo <melanie.lobo@xxxxxxxxx>
• Re: [PATCH v2] drm/i915: handle uncore spinlock when not available
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/24] drm/i915/display: Dump also display parameters
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v3 3/4] drm/i915: Add WABB blit for Wa_16018031267 / Wa_16018063123
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] drm/i915: Reserve some kernel space per vm
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• [PATCH v2] drm/i915: handle uncore spinlock when not available
  • From: Luca Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH v3 0/4] Apply Wa_16018031267 / Wa_16018063123
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/24] drm/i915/display: Add framework to add parameters specific to display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 01/24] drm/i915/display: Add framework to add parameters specific to display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v2 01/24] drm/i915/display: Add framework to add parameters specific to display
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• [PATCH v3 4/4] drm/i915: Set copy engine arbitration for Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v3 2/4] drm/i915: Reserve some kernel space per vm
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v3 3/4] drm/i915: Add WABB blit for Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v3 1/4] drm/i915: Enable NULL PTE support for vm scratch
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v3 0/4] Apply Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH 1/2] drm/i915/display: Move releasing gem object away from fb tracking
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• Re: [PATCH v2 01/24] drm/i915/display: Add framework to add parameters specific to display
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH dii-client 2/2] drm/i915: Use selective tlb invalidations where supported
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC 0/3] drm/i915: split display from drm_i915_private and i915_drv.h
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH v2] drm/i915/mcr: Hold GT forcewake during steering operations
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH v2] drm/i915/mcr: Hold GT forcewake during steering operations
  • From: "Sripada, Radhakrishna" <radhakrishna.sripada@xxxxxxxxx>
• Re: [PATCH v2 3/4] drm/i915: Add WABB blit for Wa_16018031267 / Wa_16018063123
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH v2 4/4] drm/i915: Set copy engine arbitration for Wa_16018031267 / Wa_16018063123
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH v2 1/4] drm/i915: Enable NULL PTE support for vm scratch
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH v2 2/4] drm/i915: Reserve some kernel space per vm
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/lnl: Fix check for TC phy
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH] drm/i915/pmu: Check if pmu is closed before stopping event
  • From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@xxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/display: Use intel_bo_to_drm_bo instead of obj->base
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• Re: [PATCH 1/2] drm/i915/display: Move releasing gem object away from fb tracking
  • From: Juha-Pekka Heikkila <juhapekka.heikkila@xxxxxxxxx>
• [PATCH v2 3/4] drm/i915: Add WABB blit for Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v2 4/4] drm/i915: Set copy engine arbitration for Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v2 2/4] drm/i915: Reserve some kernel space per vm
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v2 1/4] drm/i915: Enable NULL PTE support for vm scratch
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH v2 0/4] Apply Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH i-g-t v3 10/11] lib/kunit: Fetch a list of test cases in advance
  • From: Kamil Konieczny <kamil.konieczny@xxxxxxxxxxxxxxx>
• Re: [PATCH i-g-t v3 05/11] lib/kunit: Parse KTAP report from the main process thread
  • From: Kamil Konieczny <kamil.konieczny@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• [PATCH v2] drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2] drm/i915/mtl: Add Wa_14019821291
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• Re: [PATCH] drm/i915/pmu: Check if pmu is closed before stopping event
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: Regression on linux-next (next-20231016)
  • From: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@xxxxxxxxx>
• Re: Regression on linux-next (next-20231016)
  • From: Lorenzo Stoakes <lstoakes@xxxxxxxxx>
• Regression on linux-next (next-20231016)
  • From: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@xxxxxxxxx>
• [PATCH v2 5/9] drm/ci: clean up xfails (specially flakes list)
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: linux-next: build failure after merge of the drm-misc tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] drm/i915/mtl: Add counters for engine busyness ticks
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• [PATCH] drm/i915/pmu: Check if pmu is closed before stopping event
  • From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@xxxxxxxxx>
• [PATCH] drm/i915/pmu: Check is pmu is closed before stopping event
  • From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@xxxxxxxxx>
• [PATCH] drm/i915/pmu: Check is pmu is closed before stopping event
  • From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@xxxxxxxxx>
• [PATCH v2] drm/i915/mcr: Hold GT forcewake during steering operations
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/display: Abstract C10/C20 pll calculation
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH 1/2] drm/i915/display: Abstract C10/C20 pll hw readout
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• [PATCH] drm/i915/mcr: Hold GT forcewake during steering operations
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH 3/3] drm/i915/mtl: Add counters for engine busyness ticks
  • From: "Dong, Zhanjun" <zhanjun.dong@xxxxxxxxx>
• [PULL] drm-intel-fixes
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PULL] drm-intel-next
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH 2/2] drm/i915/lnl: Fix check for TC phy
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: [PATCH 1/2] drm/i915/lnl: Extend C10/C20 phy
  • From: Gustavo Sousa <gustavo.sousa@xxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3 (rev5)
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3 (rev5)
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• [PULL] drm-intel-gt-next
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3 (rev5)
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Sean Young <sean@xxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: Reset message bus after each read/write operation (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: Reset message bus after each read/write operation (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PULL] drm-misc-fixes
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PULL] drm-misc-next
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Re: [CI] PR for new GuC v70.13.1
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: Reset message bus after each read/write operation (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2] debugobjects: stop accessing objects after releasing spinlock
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH v4 2/2] drm/i915: remove display device info from i915 capabilities
  • From: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@xxxxxxxxx>
• Re: [PATCH v4 1/2] drm/i915/display: debugfs entry to list display capabilities
  • From: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@xxxxxxxxx>
• Re: [PATCH v2 9/9] drm/i915: Use kmap_local_page() in gem/i915_gem_execbuffer.c
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3 (rev5)
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for Cleanup a few functions in C10/C20 handling
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Cleanup a few functions in C10/C20 handling
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/lnl: Assign correct phys
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/lnl: Assign correct phys
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for display device info as a separate debugfs entry (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: Reset message bus after each read/write operation (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for fix DRM_USE_DYNAMIC_DEBUG=y regression (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for fix DRM_USE_DYNAMIC_DEBUG=y regression (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/mst: MST modeset sequence fixes
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/mst: MST modeset sequence fixes
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Add bigjoiner force enable option to debugfs (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/mtl: Add Wa_14019821291
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/mtl: Support HBR3 rate with C10 phy and eDP in MTL
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] drm/i915/display: Abstract C10/C20 pll calculation
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 1/2] drm/i915/display: Abstract C10/C20 pll hw readout
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 0/2] Cleanup a few functions in C10/C20 handling
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 0/2] drm/i915/lnl: Assign correct phys
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 2/2] drm/i915/lnl: Fix check for TC phy
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH 1/2] drm/i915/lnl: Extend C10/C20 phy
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for display device info as a separate debugfs entry (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: Add Wa_14019821291
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for display device info as a separate debugfs entry (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: warning for display device info as a separate debugfs entry (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Flush WC GGTT only on required platforms (rev9)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/dsi: An attempt to get rid of IOSF GPIO on VLV
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: Reset message bus after each read/write operation (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/mtl: Add Wa_14019821291
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/mtl: Add Wa_14019821291
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/dsi: An attempt to get rid of IOSF GPIO on VLV
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [CI] PR for new GuC v70.13.1
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• PR for new GuC v70.13.1
  • From: John.C.Harrison@xxxxxxxxx
• [CI] PR for new GuC v70.13.1
  • From: John.C.Harrison@xxxxxxxxx
• Re: [PATCH] drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCH v7c 23/24] drm-drivers: DRM_CLASSMAP_USE in 2nd batch of drivers, helpers
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 24/24] drm: restore CONFIG_DRM_USE_DYNAMIC_DEBUG un-BROKEN
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 22/24] drm: use correct ccflags-y spelling
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 18/24] dyndbg: reserve flag bit _DPRINTK_FLAGS_PREFIX_CACHED
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 17/24] dyndbg-doc: add classmap info to howto
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 20/24] dyndbg: refactor *dynamic_emit_prefix
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 21/24] dyndbg: change WARN_ON to WARN_ON_ONCE
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 14/24] dyndbg-API: fix CONFIG_DRM_USE_DYNAMIC_DEBUG regression
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 19/24] dyndbg: add _DPRINTK_FLAGS_INCL_LOOKUP
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 15/24] dyndbg: refactor ddebug_classparam_clamp_input
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 16/24] dyndbg-API: promote DYNDBG_CLASSMAP_PARAM to API
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 09/24] dyndbg: silence debugs with no-change updates
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 13/24] dyndbg-API: remove DD_CLASS_TYPE_(DISJOINT|LEVEL)_NAMES and code
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 11/24] dyndbg: tighten fn-sig of ddebug_apply_class_bitmap
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 07/24] dyndbg: drop NUM_TYPE_ARRAY
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 12/24] dyndbg: reduce verbose=3 messages in ddebug_add_module
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 10/24] dyndbg: tighten ddebug_class_name() 1st arg type
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 08/24] dyndbg: reduce verbose/debug clutter
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 06/24] dyndbg: split param_set_dyndbg_classes to module/wrapper fns
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 02/24] dyndbg: reword "class unknown, " to "class:_UNKNOWN_"
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 03/24] dyndbg: make ddebug_class_param union members same size
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 05/24] dyndbg: ddebug_apply_class_bitmap - add module arg, select on it
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 04/24] dyndbg: replace classmap list with a vector
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 01/24] test-dyndbg: fixup CLASSMAP usage error
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7c 00/24] fix DRM_USE_DYNAMIC_DEBUG=y regression
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3 (rev5)
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] drm/i915/guc: Close deregister-context race against CT-loss
  • From: "Gupta, Anshuman" <anshuman.gupta@xxxxxxxxx>
• Re: [PATCH v2 9/9] drm/i915: Use kmap_local_page() in gem/i915_gem_execbuffer.c
  • From: Zhao Liu <zhao1.liu@xxxxxxxxx>
• [PATCH 4/4] drm/i915/mst: Always write CHICKEN_TRANS
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 3/4] drm/i915/mst: Clear ACT just before triggering payload allocation
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 2/4] drm/i915/mst: Disable transcoder before deleting the payload
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 1/4] drm/i915/mst: Swap TRANSCONF vs. FECSTALL_DIS_DPTSTREAM_DPTTG disable
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 0/4] drm/i915/mst: MST modeset sequence fixes
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/i915: Flush WC GGTT only on required platforms
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v12 3/4] drm/i915: Add WABB blit for Wa_16018031267 / Wa_16018063123
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH v12 4/4] drm/i915: Set copy engine arbitration for Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH v12 3/4] drm/i915: Add WABB blit for Wa_16018031267 / Wa_16018063123
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• [PATCH] drm/i915: Add bigjoiner force enable option to debugfs
  • From: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
• Re: [PATCH v12 2/4] drm/i915: Reserve some kernel space per vm
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH v12 1/4] drm/i915: Enable NULL PTE support for vm scratch
  • From: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
• Re: [PATCH] drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/i915: Flush WC GGTT only on required platforms
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: Support HBR3 rate with C10 phy and eDP in MTL
  • From: "Kahola, Mika" <mika.kahola@xxxxxxxxx>
• Re: [rft, PATCH v1 0/2] drm/i915/dsi: An attempt to get rid of IOSF GPIO on VLV
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/i915: Flush WC GGTT only on required platforms
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/i915: Flush WC GGTT only on required platforms
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915/mtl: Support HBR3 rate with C10 phy and eDP in MTL
  • From: Chaitanya Kumar Borah <chaitanya.kumar.borah@xxxxxxxxx>
• Re: [PATCH v2] drm/i915: Prevent potential null-ptr-deref in engine_init_common
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• [PATCH v4 1/2] drm/i915/display: debugfs entry to list display capabilities
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH v4 2/2] drm/i915: remove display device info from i915 capabilities
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH v4 0/2] display device info as a separate debugfs entry
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH v3] drm/i915: Flush WC GGTT only on required platforms
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxx>
• Re: [rft, PATCH v1 0/2] drm/i915/dsi: An attempt to get rid of IOSF GPIO on VLV
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] drm/i915/mtl: Add Wa_14019821291
  • From: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@xxxxxxxxx>
• [PATCH v1 1/2] drm/i915/dsi: Extract common soc_gpio_exec() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [rft, PATCH v1 0/2] drm/i915/dsi: An attempt to get rid of IOSF GPIO on VLV
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/2] drm/i915/dsi: Replace poking of VLV GPIOs behind the driver's back
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v17 0/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: linux-next: manual merge of the drm-misc tree with the asm-generic tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3 (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/quirk: Add quirk for devices with incorrect PWM frequency
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for display device info as a separate debugfs entry (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] display device info as a separate debugfs entry
  • From: "Govindapillai, Vinod" <vinod.govindapillai@xxxxxxxxx>
• [PATCH v3 1/1] drm/i915/display: debugfs entry to list display capabilities
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH v3 0/1] display device info as a separate debugfs entry
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3 (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] drm/i915: remove display device info from i915 capabilities
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH v2 1/2] drm/i915/display: debugfs entry to list display capabilities
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH v2 0/2] display device info as a separate debugfs entry
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3
  • From: Vinay Belgaumkar <vinay.belgaumkar@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/quirk: Add quirk for devices with incorrect PWM frequency
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxxxxxxxx>
• [PATCH v17 7/7] drm/i915: Enable GuC TLB invalidations for MTL
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v17 5/7] drm/i915: No TLB invalidation on wedged GT
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v17 1/7] drm/i915: Add GuC TLB Invalidation device info flags
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v17 6/7] drm/i915/gt: Increase sleep in gt_tlb selftest sanitycheck
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v17 3/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v17 4/7] drm/i915: No TLB invalidation on suspended GT
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v17 2/7] drm/i915/guc: Add CT size delay helper
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v17 0/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Apply Wa_16018031267 / Wa_16018063123 (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/quirk: Add quirk for devices with incorrect PWM frequency
  • From: Allen Ballway <ballway@xxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: DPLL code cleanups (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: DPLL code cleanups (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: Reset message bus after each read/write operation (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev8)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev8)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev8)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3 (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/10] drm/i915/spi: spi register with mtd
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH 06/10] drm/i915/spi: spi register with mtd
  • From: "Usyskin, Alexander" <alexander.usyskin@xxxxxxxxx>
• Re: [PATCH 06/10] drm/i915/spi: spi register with mtd
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Apply Wa_16018031267 / Wa_16018063123 (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Apply Wa_16018031267 / Wa_16018063123 (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: Reset message bus after each read/write operation (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Apply Wa_16018031267 / Wa_16018063123 (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for display device info as a separate debugfs entry (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for display device info as a separate debugfs entry (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/10] drm/i915/spi: spi register with mtd
  • From: "Usyskin, Alexander" <alexander.usyskin@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3 (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3
  • From: Mika Kuoppala <mika.kuoppala@xxxxxxxxx>
• Re: [PATCH v1 1/2] drm/i915/display: display device info debugfs entry
  • From: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Add bigjoiner force enable option to debugfs
  • From: kernel test robot <lkp@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 4/6] drm/i915/panelreplay: Enable panel replay dpcd initialization for DP
  • From: "Manna, Animesh" <animesh.manna@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 2/2] drm/i915: remove display device info from i915 capabilities
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH v1 1/2] drm/i915/display: display device info debugfs entry
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• [PATCH v1 0/2] display device info as a separate debugfs entry
  • From: Vinod Govindapillai <vinod.govindapillai@xxxxxxxxx>
• Re: ✗ Fi.CI.BAT: failure for drm/i915/display: Reset message bus after each read/write operation (rev4)
  • From: "Kahola, Mika" <mika.kahola@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: avoid stringop-overflow warning
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/gvt: Optimize mmio_offset_compare() for efficiency (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/mtl: avoid stringop-overflow warning (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/mtl: avoid stringop-overflow warning (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Prevent potential null-ptr-deref in engine_init_common (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/gvt: Optimize mmio_offset_compare() for efficiency (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Prevent potential null-ptr-deref in engine_init_common (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/display: Reset message bus after each read/write operation (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Move the g45 PEG band gap HPD workaround to the HPD code (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/bios: Clamp VBT HDMI level shift on BDW (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3
  • From: "Belgaumkar, Vinay" <vinay.belgaumkar@xxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• [PATCH] drm/i915/mtl: Don't set PIPE_CONTROL_FLUSH_L3
  • From: Vinay Belgaumkar <vinay.belgaumkar@xxxxxxxxx>
• Re: [PATCH] drm/i915/mtl: avoid stringop-overflow warning
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915/mtl: avoid stringop-overflow warning
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v3] drm/i915/display: Reset message bus after each read/write operation
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] drm/i915/gem: Allow users to disable waitboost
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• [PATCH v2] drm/i915/gvt: Optimize mmio_offset_compare() for efficiency
  • From: Kuan-Wei Chiu <visitorckw@xxxxxxxxx>
• [PATCH] drm/i915/gvt: Optimize mmio_offset_compare() for efficiency
  • From: Kuan-Wei Chiu <visitorckw@xxxxxxxxx>
• Re: [PATCH] drm/i915: Retry gtt fault when out of fence register
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Retry gtt fault when out of fence register
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v16 0/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• [PATCH v16 7/7] drm/i915: Enable GuC TLB invalidations for MTL
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v16 6/7] drm/i915/gt: Increase sleep in gt_tlb selftest sanitycheck
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v16 2/7] drm/i915/guc: Add CT size delay helper
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v16 4/7] drm/i915: No TLB invalidation on suspended GT
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v16 3/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v16 0/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v16 5/7] drm/i915: No TLB invalidation on wedged GT
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v16 1/7] drm/i915: Add GuC TLB Invalidation device info flags
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Framework for display parameters (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: ✗ Fi.CI.IGT: failure for drm/i915: Store DSC DPCD capabilities in the connector (rev9)
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• [PATCH v3] drm/i915/display: Reset message bus after each read/write operation
  • From: Mika Kahola <mika.kahola@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Framework for display parameters (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Framework for display parameters (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for Framework for display parameters (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/display: Reset message bus after each read/write operation
  • From: "Kahola, Mika" <mika.kahola@xxxxxxxxx>
• [PATCH v2 23/24] drm/i915/display: Move enable_dp_mst under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 20/24] drm/i915/display: Use device parameters instead of module in I915_STATE_WARN
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 22/24] drm/i915/display: Move nuclear_pageflip under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 24/24] drm/i915/display: Use same permissions for enable_sagv as for rest
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 21/24] drm/i915/display: Move verbose_state_checks under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 12/24] drm/i915/display: Move disable_power_well module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 10/24] drm/i915/display: Move enable_dpt module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 14/24] drm/i915/display: Move invert_brightness module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 17/24] drm/i915/display: Move load_detect_test parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 09/24] drm/i915/display: Move enable_dc module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 19/24] drm/i915/display: Move disable_display parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 18/24] drm/i915/display: Move force_reset_modeset_test parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 08/24] drm/i915/display: Move vbt_sdvo_panel_type module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 16/24] drm/i915/display: Move enable_dpcd_backlightmodule parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 15/24] drm/i915/display: Move edp_vswing module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 07/24] drm/i915/display: Move panel_use_ssc module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 11/24] drm/i915/display: Move enable_sagv module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 13/24] drm/i915/display: Move enable_ips module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 05/24] drm/i915/display: Move vbt_firmware module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 04/24] drm/i915/display: Move psr related module parameters under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 02/24] drm/i915/display: Dump also display parameters
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 06/24] drm/i915/display: Move lvds_channel_mode module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 01/24] drm/i915/display: Add framework to add parameters specific to display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 03/24] drm/i915/display: Move enable_fbc module parameter under display
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• [PATCH v2 00/24] Framework for display parameters
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/10] drm/i915/spi: spi register with mtd
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Add helper for range_bpg_offset and minor fixes
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence
  • From: Jouni Högander <jouni.hogander@xxxxxxxxx>
• Re: [PATCH] drm/i915/gem: Allow users to disable waitboost
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915: Flush WC GGTT only on required platforms
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxx>
• Re: [PATCH] drm/i915: Flush WC GGTT only on required platforms
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Add helper for range_bpg_offset and minor fixes
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Support FP16 compressed formats on MTL
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v7 6/6] drm/i915/panelreplay: Debugfs support for panel replay
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• [PATCH 2/2] drm/i915/vdsc: Remove old comment about DSC 444 support
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 1/2] drm/i915/dsc: Use helper to calculate range_bpg_offset
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• [PATCH 0/2] Add helper for range_bpg_offset and minor fixes
  • From: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
• Re: [PATCH v7 5/6] drm/i915/panelreplay: enable/disable panel replay
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• Re: [PATCH v7 4/6] drm/i915/panelreplay: Enable panel replay dpcd initialization for DP
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• Re: [PATCH v7 3/6] drm/i915/panelreplay: Initializaton and compute config for panel replay
  • From: "Murthy, Arun R" <arun.r.murthy@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Flush WC GGTT only on required platforms (rev8)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Flush WC GGTT only on required platforms (rev8)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Flush WC GGTT only on required platforms (rev7)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Flush WC GGTT only on required platforms (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Flush WC GGTT only on required platforms (rev6)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Flush WC GGTT only on required platforms (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Flush WC GGTT only on required platforms (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Flush WC GGTT only on required platforms (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Flush WC GGTT only on required platforms (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Flush WC GGTT only on required platforms (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for Resolve suspend-resume racing with GuC destroy-context-worker (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: warning for drm/i915: Flush WC GGTT only on required platforms (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Flush WC GGTT only on required platforms (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Fix LUT rounding
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Prevent potential null-ptr-deref in engine_init_common (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/display: Reset message bus after each read/write operation (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7b 00/25] fix DRM_USE_DYNAMIC_DEBUG=y regression
  • From: jim.cromie@xxxxxxxxx
• Re: [PATCH] drm/i915: stop including i915_utils.h from intel_runtime_pm.h
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: drop gt/intel_gt.h include from skl_universal_plane.c (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915: Flush WC GGTT only on required platforms
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for drm/i915: Fix bigjoiner case for DP2.0
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION e3b18f7200f45d66f7141136c25554ac1e82009b
  • From: kernel test robot <lkp@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Store DSC DPCD capabilities in the connector (rev9)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.IGT: success for series starting with [1/3] drm/i915: make some error capture functions static (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for Resolve suspend-resume racing with GuC destroy-context-worker (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Resolve suspend-resume racing with GuC destroy-context-worker (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: stop including i915_utils.h from intel_runtime_pm.h (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 2/3] drm/i915/guc: Close deregister-context race against CT-loss
  • From: Alan Previn <alan.previn.teres.alexis@xxxxxxxxx>
• [PATCH v5 0/3] Resolve suspend-resume racing with GuC destroy-context-worker
  • From: Alan Previn <alan.previn.teres.alexis@xxxxxxxxx>
• [PATCH v5 1/3] drm/i915/guc: Flush context destruction worker at suspend
  • From: Alan Previn <alan.previn.teres.alexis@xxxxxxxxx>
• [PATCH v5 3/3] drm/i915/gt: Timeout when waiting for idle in suspending
  • From: Alan Previn <alan.previn.teres.alexis@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for fix DRM_USE_DYNAMIC_DEBUG=y regression (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for fix DRM_USE_DYNAMIC_DEBUG=y regression (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Temporarily force MTL into uncached mode (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: DPLL code cleanups (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v7b 20/25] dyndbg: add _DPRINTK_FLAGS_INCL_LOOKUP
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 23/25] drm: use correct ccflags-y spelling
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 25/25] drm: restore CONFIG_DRM_USE_DYNAMIC_DEBUG un-BROKEN
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 22/25] dyndbg: change WARN_ON to WARN_ON_ONCE
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 19/25] dyndbg: reserve flag bit _DPRINTK_FLAGS_PREFIX_CACHED
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 24/25] drm-drivers: DRM_CLASSMAP_USE in 2nd batch of drivers, helpers
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 21/25] dyndbg: refactor *dynamic_emit_prefix
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 18/25] dyndbg-doc: add classmap info to howto
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 14/25] dyndbg-API: fix CONFIG_DRM_USE_DYNAMIC_DEBUG regression
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 16/25] dyndbg: refactor ddebug_classparam_clamp_input
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 17/25] dyndbg-API: promote DYNDBG_CLASSMAP_PARAM to API
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 15/25] dyndbg: add for_each_boxed_vector
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 10/25] dyndbg: tighten ddebug_class_name() 1st arg type
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 12/25] dyndbg: reduce verbose=3 messages in ddebug_add_module
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 13/25] dyndbg-API: remove DD_CLASS_TYPE_(DISJOINT|LEVEL)_NAMES and code
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 11/25] dyndbg: tighten fn-sig of ddebug_apply_class_bitmap
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 08/25] dyndbg: reduce verbose/debug clutter
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 07/25] dyndbg: drop NUM_TYPE_ARRAY
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 09/25] dyndbg: silence debugs with no-change updates
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 06/25] dyndbg: split param_set_dyndbg_classes to module/wrapper fns
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 03/25] dyndbg: make ddebug_class_param union members same size
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 05/25] dyndbg: ddebug_apply_class_bitmap - add module arg, select on it
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 04/25] dyndbg: replace classmap list with a vector
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 02/25] dyndbg: reword "class unknown, " to "class:_UNKNOWN_"
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 01/25] test-dyndbg: fixup CLASSMAP usage error
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7b 00/25] fix DRM_USE_DYNAMIC_DEBUG=y regression
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: DPLL code cleanups (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Frontbuffer tracking preparing for Xe (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Move the g45 PEG band gap HPD workaround to the HPD code (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v15 4/7] drm/i915: No TLB invalidation on suspended GT
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v15 5/7] drm/i915: No TLB invalidation on wedged GT
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v15 1/7] drm/i915: Add GuC TLB Invalidation device info flags
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v15 3/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v15 6/7] drm/i915/gt: Increase sleep in gt_tlb selftest sanitycheck
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v15 7/7] drm/i915: Enable GuC TLB invalidations for MTL
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v15 2/7] drm/i915/guc: Add CT size delay helper
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v15 0/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/bios: Clamp VBT HDMI level shift on BDW
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Support FP16 compressed formats on MTL (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Flush WC GGTT only on required platforms (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/gem: Allow users to disable waitboost
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Fix LUT rounding
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Fix LUT rounding
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Fix LUT rounding
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] drm/i915/display: Reset message bus after each read/write operation
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Retry gtt fault when out of fence register
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v14 3/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v14 0/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• Re: [PATCH v14 3/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Prevent potential null-ptr-deref in engine_init_common (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 4/7] drm/i915: No TLB invalidation on suspended GT
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• Re: [PATCH v13 4/7] drm/i915: No TLB invalidation on suspended GT
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• Re: [PATCH v13 3/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/display: Reset message bus after each read/write operation (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] tests: save GPU engine information more properly
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [CI] PR for new GuC v70.13.1
  • From: John.C.Harrison@xxxxxxxxx
• [PATCH v14 6/7] drm/i915/gt: Increase sleep in gt_tlb selftest sanitycheck
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v14 4/7] drm/i915: No TLB invalidation on suspended GT
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v14 7/7] drm/i915: Enable GuC TLB invalidations for MTL
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v14 3/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v14 0/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v14 2/7] drm/i915/guc: Add CT size delay helper
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v14 5/7] drm/i915: No TLB invalidation on wedged GT
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v14 1/7] drm/i915: Add GuC TLB Invalidation device info flags
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Add bigjoiner force enable option to debugfs (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Flush WC GGTT only on required platforms
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v2] drm/i915: Flush WC GGTT only on required platforms
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Buggy graphics on 82G33/G31.
  • From: Matheus <tateusg@xxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Clean up zero initializers
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 3/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH v13 4/7] drm/i915: No TLB invalidation on suspended GT
  • From: "Cavitt, Jonathan" <jonathan.cavitt@xxxxxxxxx>
• Re: Regression in linux-next
  • From: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@xxxxxxxxx>
• [PATCH] drm/i915/bios: Clamp VBT HDMI level shift on BDW
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] drm/i915/dsb: Correct DSB command buffer cache coherency settings
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH v2] drm/i915: Flush WC GGTT only on required platforms
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxx>
• Re: [PATCH v2] debugobjects: stop accessing objects after releasing spinlock
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCH 4/4] drm/i915: Fix glk+ degamma LUT conversions
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 2/4] drm/i915: Adjust LUT rounding rules
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 3/4] drm/i915: s/clamp()/min()/ in i965_lut_11p6_max_pack()
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 1/4] drm: Fix color LUT rounding
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• [PATCH 0/4] drm/i915: Fix LUT rounding
  • From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Flush WC GGTT only on required platforms
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxx>
• Re: [PATCH] drm/i915: Flush WC GGTT only on required platforms
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Remove the modparam verbose_state_checks
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Flush WC GGTT only on required platforms
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxx>
• Re: [PATCH] drm/i915: Retry gtt fault when out of fence register
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Flush WC GGTT only on required platforms
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 4/7] drm/i915: No TLB invalidation on suspended GT
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Fix bigjoiner case for DP2.0
  • From: "Srinivas, Vidya" <vidya.srinivas@xxxxxxxxx>
• Re: [PATCH] drm/i915: Fix bigjoiner case for DP2.0
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Flush WC GGTT only on required platforms
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxx>
• Re: [PATCH v13 3/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915/gvt: Optimize mmio_offset_compare() for efficiency
  • From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
• Re: [PATCH] drm/i915: Flush WC GGTT only on required platforms
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• [PATCH] drm/i915: Flush WC GGTT only on required platforms
  • From: Nirmoy Das <nirmoy.das@xxxxxxxxx>
• Re: [PATCH] drm/i915: Add bigjoiner force enable option to debugfs
  • From: "Lisovskiy, Stanislav" <stanislav.lisovskiy@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: drop gt/intel_gt.h include from skl_universal_plane.c (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Prevent potential null-ptr-deref in engine_init_common (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/i915/lnl: Remove watchdog timers for PSR
  • From: "Hogander, Jouni" <jouni.hogander@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for tests: save GPU engine information more properly
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Fix bigjoiner case for DP2.0
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] tests: save GPU engine information more properly
  • From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
• [PATCH v2] drm/i915/display: Reset message bus after each read/write operation
  • From: Mika Kahola <mika.kahola@xxxxxxxxx>
• Re: linux-next: manual merge of the drm-misc tree with the asm-generic tree
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• ✗ Fi.CI.SPARSE: warning for fix DRM_USE_DYNAMIC_DEBUG=y regression (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for fix DRM_USE_DYNAMIC_DEBUG=y regression (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for series starting with [1/2] drm/i915/aux: add separate register macros and functions for VLV/CHV
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Store DSC DPCD capabilities in the connector (rev9)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC 01/33] drm/doc/rfc: Add RFC document for proposed Plane Color Pipeline
  • From: "Shankar, Uma" <uma.shankar@xxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Store DSC DPCD capabilities in the connector (rev9)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] tests: save GPU engine information more properly
  • From: Lee Shawn C <shawn.c.lee@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for series starting with [1/3] drm/i915: make some error capture functions static (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915: make some error capture functions static (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/3] drm/i915: make some error capture functions static (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: stop including i915_utils.h from intel_runtime_pm.h (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: stop including i915_utils.h from intel_runtime_pm.h (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: drop gt/intel_gt.h include from skl_universal_plane.c (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 3/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• Re: [PATCH v13 4/7] drm/i915: No TLB invalidation on suspended GT
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915/gt: Temporarily force MTL into uncached mode (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• linux-next: manual merge of the drm-misc tree with the asm-generic tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: Temporarily force MTL into uncached mode (rev4)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Prevent potential null-ptr-deref in engine_init_common (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] drm/i915/pxp: Add drm_dbgs for critical PXP events.
  • From: "Balasubrawmanian, Vivaik" <vivaik.balasubrawmanian@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for Frontbuffer tracking preparing for Xe (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for Panel replay phase1 implementation (rev9)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for Frontbuffer tracking preparing for Xe (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Support FP16 compressed formats on MTL (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v13 7/7] drm/i915: Enable GuC TLB invalidations for MTL
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v13 6/7] drm/i915/gt: Increase sleep in gt_tlb selftest sanitycheck
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v13 4/7] drm/i915: No TLB invalidation on suspended GT
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v13 0/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v13 5/7] drm/i915: No TLB invalidation on wedged GT
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v13 2/7] drm/i915/guc: Add CT size delay helper
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v13 3/7] drm/i915: Define and use GuC and CTB TLB invalidation routines
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• [PATCH v13 1/7] drm/i915: Add GuC TLB Invalidation device info flags
  • From: Jonathan Cavitt <jonathan.cavitt@xxxxxxxxx>
• Re: [PATCH] drm/i915: drop gt/intel_gt.h include from skl_universal_plane.c
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915/sprite: move sprite_name() to intel_sprite.c (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BUILD: failure for linux-next: build failure after merge of the drm-misc tree (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] drm/i915/dsb: Correct DSB command buffer cache coherency settings
  • From: "Shankar, Uma" <uma.shankar@xxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Remove the module parameter 'fastboot' (rev5)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm/i915/dsb: Allocate command buffer from local memory
  • From: "Shankar, Uma" <uma.shankar@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Retry gtt fault when out of fence register
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Retry gtt fault when out of fence register
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.IGT: failure for drm/i915: Add new DG2 PCI IDs (rev2)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: Move the g45 PEG band gap HPD workaround to the HPD code
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] drm/i915: Fix bigjoiner case for DP2.0
  • From: vsrini4 <vidya.srinivas@xxxxxxxxx>
• ✗ Fi.CI.BAT: failure for drm/i915: DPLL code cleanups
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.SPARSE: warning for drm/i915: DPLL code cleanups
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: ✗ Fi.CI.BAT: failure for drm/i915: Define and use GuC and CTB TLB invalidation routines (rev2)
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• Re: ✓ Fi.CI.BAT: success for drm/i915: Add new DG2 PCI IDs (rev2)
  • From: Matt Roper <matthew.d.roper@xxxxxxxxx>
• Re: [PATCH] drm/i915/guc: Suppress 'ignoring reset notification' message
  • From: John Harrison <john.c.harrison@xxxxxxxxx>
• ✓ Fi.CI.BAT: success for drm/i915: Add bigjoiner force enable option to debugfs (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Add bigjoiner force enable option to debugfs (rev3)
  • From: Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v7 18/25] dyndbg-doc: add classmap info to howto
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 25/25] drm: restore CONFIG_DRM_USE_DYNAMIC_DEBUG un-BROKEN
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 24/25] drm-drivers: DRM_CLASSMAP_USE in 2nd batch of drivers, helpers
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 23/25] drm: use correct ccflags-y spelling
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 19/25] dyndbg: reserve flag bit _DPRINTK_FLAGS_PREFIX_CACHED
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 20/25] dyndbg: add _DPRINTK_FLAGS_INCL_LOOKUP
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 13/25] dyndbg-API: remove DD_CLASS_TYPE_(DISJOINT|LEVEL)_NAMES and code
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 22/25] dyndbg: improve err report in attach_user_module_classes
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 21/25] dyndbg: refactor *dynamic_emit_prefix
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 17/25] dyndbg-API: promote DYNDBG_CLASSMAP_PARAM to API
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 16/25] dyndbg: refactor ddebug_classparam_clamp_input
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 15/25] dyndbg: add for_each_boxed_vector
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 14/25] dyndbg-API: fix CONFIG_DRM_USE_DYNAMIC_DEBUG regression
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 07/25] dyndbg: drop NUM_TYPE_ARRAY
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 12/25] dyndbg: reduce verbose=3 messages in ddebug_add_module
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 10/25] dyndbg: tighten ddebug_class_name() 1st arg type
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 09/25] dyndbg: silence debugs with no-change updates
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 11/25] dyndbg: tighten fn-sig of ddebug_apply_class_bitmap
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 06/25] dyndbg: split param_set_dyndbg_classes to module/wrapper fns
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 08/25] dyndbg: reduce verbose/debug clutter
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 05/25] dyndbg: ddebug_apply_class_bitmap - add module arg, select on it
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 04/25] dyndbg: replace classmap list with a vector
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 03/25] dyndbg: make ddebug_class_param union members same size
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• [PATCH v7 01/25] test-dyndbg: fixup CLASSMAP usage error
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>