libvirt

• Thread Index

• Re: [libvirt PATCH v2 6/9] qemu: prepare and stop the dbus daemon
  • From: Daniel P. Berrangé
• [PATCH] network: bridge_driver: Use new helpers for storing libvirt errors
  • From: Gaurav Agrawal
• Re: [PATCH] virt-aa-helper: Fix build by including virutil.h
  • From: Michal Privoznik
• Re: [PATCH v4 4/5] lxc: Implement virtual /proc/cpuinfo via LXC fuse
  • From: Daniel P. Berrangé
• Re: [PATCH 5/8] domain: save/restore the state of dbus-daemon running
  • From: Michal Privoznik
• Re: [PATCH 3/8] qemu-conf: add dbusStateDir
  • From: Michal Privoznik
• Re: [libvirt PATCH] docs: add page describing the libvirt daemons
  • From: Daniel P. Berrangé
• [libvirt PATCH] tests: fix missing test data for network port XML
  • From: Daniel P. Berrangé
• [libvirt PATCH] src: add virutil.h to more source files for geteuid() compat
  • From: Daniel P. Berrangé
• [libvirt PATCH v2 8/9] qemu-slirp: register helper for migration
  • From: marcandre . lureau
• [libvirt PATCH v2 6/9] qemu: prepare and stop the dbus daemon
  • From: marcandre . lureau
• [libvirt PATCH v2 9/9] WIP: qemu-slirp: update to follow current spec
  • From: marcandre . lureau
• [libvirt PATCH v2 7/9] qemu: add dbus-vmstate helper migration support
  • From: marcandre . lureau
• [libvirt PATCH v2 5/9] domain: save/restore the state of dbus-daemon running
  • From: marcandre . lureau
• [libvirt PATCH v2 4/9] qemu: add a DBus daemon helper unit
  • From: marcandre . lureau
• [libvirt PATCH v2 2/9] qemu-conf: add configurable dbus-daemon location
  • From: marcandre . lureau
• [libvirt PATCH v2 3/9] qemu-conf: add dbusStateDir
  • From: marcandre . lureau
• [libvirt PATCH v2 1/9] qemu: remove dbus-vmstate code
  • From: marcandre . lureau
• [libvirt PATCH v2 0/9] Second take on slirp-helper & dbus-vmstate
  • From: marcandre . lureau
• Re: [libvirt PATCH] docs: add page describing the libvirt daemons
  • From: Erik Skultety
• Re: [PATCH] virt-aa-helper: Fix build by including virutil.h
  • From: Christian Ehrhardt
• Re: [PATCH 0/3] security: Don't fail if locking a file on NFS mount fails
  • From: Peter Krempa
• Re: [PATCH] network: bridge_driver: Use new helpers for storing libvirt errors
  • From: Laine Stump
• [libvirt PATCH] node_device: hal: include virutil.h
  • From: Ján Tomko
• Re: [libvirt PATCH 0/7] tests: libxl: clean up test mocking
  • From: Jim Fehlig
• Re: [libvirt PATCH 7/7] tests: libxl: do not run the emulator
  • From: Jim Fehlig
• [PATCH] virt-aa-helper: Fix build by including virutil.h
  • From: Jim Fehlig
• Re: [PATCH] build: stop running aclocal manually
  • From: Ján Tomko
• [libvirt PATCH] bhyve: utils: use relative path for virclosecallbacks.h
  • From: Ján Tomko
• Re: [libvirt PATCH 0/8] Reduce usage of virutil.h (include epistles)
  • From: Daniel Henrique Barboza
• [PATCH] network: bridge_driver: Use new helpers for storing libvirt errors
  • From: Gaurav Agrawal
• Re: [PATCH v1 10/12] add hostdev handling for bhyve
  • From: Ryan Moeller
• [libvirt PATCH] docs: add page describing the libvirt daemons
  • From: Daniel P. Berrangé
• Re: [PATCH v1 00/12] Bhyve driver improvements
  • From: Ryan Moeller
• network: bridge_driver: Use new helpers for storing libvirt errors
  • From: Gaurav Agrawal
• Re: [PATCH v1 00/12] Bhyve driver improvements
  • From: Daniel P. Berrangé
• Re: [PATCH v1 11/12] bhyve: command: enable booting from hostdevs
  • From: Daniel P. Berrangé
• Re: [PATCH v1 10/12] add hostdev handling for bhyve
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 0/3] Remove usage of virHexToBin (glib chronicles)
  • From: Laine Stump
• [PATCH] build: stop running aclocal manually
  • From: Daniel P. Berrangé
• Re: [PATCH 3/3] qemu-img: Deprecate use of -b without -F
  • From: Peter Krempa
• Re: [PATCH 8/9] virStorageFileGetMetadataRecurse: Allow format probing under special circumstances
  • From: Peter Krempa
• Re: [PATCH v1 09/12] bhyve: parse_command: slot, bus, func -> bus, slot, func
  • From: Daniel P. Berrangé
• Re: [PATCH v1 08/12] bhyve: command: refactor virBhyveProcessBuildBhyveCmd
  • From: Daniel P. Berrangé
• Re: [PATCH v1 07/12] bhyve: add reboot support
  • From: Daniel P. Berrangé
• Re: [PATCH v1 06/12] bhyve: add hooks
  • From: Ryan Moeller
• Re: [PATCH v1 06/12] bhyve: add hooks
  • From: Daniel P. Berrangé
• Re: [PATCH v1 05/12] bhyve: monitor: refactor register/unregister
  • From: Daniel P. Berrangé
• Re: [PATCH v1 04/12] bhyve: monitor: Make bhyveMonitor a virClass
  • From: Daniel P. Berrangé
• Re: [PATCH v1 03/12] bhyve: process: don't bother seeking to end of log
  • From: Daniel P. Berrangé
• Re: [PATCH v1 02/12] conf: fix use after free
  • From: Daniel P. Berrangé
• Re: [PATCH v1 01/12] bhyve: process: remove unneeded header
  • From: Daniel P. Berrangé
• Re: [PATCH 0/3] Tighten qemu-img rules on missing backing format
  • From: Eric Blake
• Re: [PATCH 3/3] qemu-img: Deprecate use of -b without -F
  • From: Eric Blake
• Re: [PATCH 0/8] Second take on slirp-helper & dbus-vmstate
  • From: Marc-André Lureau
• Re: [PATCH 1/8] qemu: remove dbus-vmstate code
  • From: Marc-André Lureau
• Re: [PATCH 7/8] qemu: add dbus-vmstate helper migration support
  • From: Marc-André Lureau
• Re: [PATCH 5/8] domain: save/restore the state of dbus-daemon running
  • From: Marc-André Lureau
• Re: [PATCH 2/8] qemu-conf: add configurable dbus-daemon location
  • From: Marc-André Lureau
• Re: [PATCH 4/8] qemu: add a DBus daemon helper unit
  • From: Marc-André Lureau
• Re: [PATCH 3/8] qemu-conf: add dbusStateDir
  • From: Marc-André Lureau
• Re: [PATCH 8/8] qemu-slirp: register helper for migration
  • From: Marc-André Lureau
• Re: [libvirt PATCH 1/3] util: uuid: remove use of virHexToBin
  • From: Laine Stump
• Re: [libvirt PATCH 0/4] Do not depend on conf/ in util/
  • From: Michal Privoznik
• Re: [libvirt PATCH 3/4] virhostdev: move to src/hypervisor
  • From: Michal Privoznik
• [libvirt PATCH] ci: Fix handling of $PKG_CONFIG_LIBDIR
  • From: Andrea Bolognani
• [PATCH v4 5/5] lxc: Count max VCPUs based on cpuset.cpus in native config
  • From: Julio Faracco
• [PATCH v4 4/5] lxc: Implement virtual /proc/cpuinfo via LXC fuse
  • From: Julio Faracco
• [PATCH v4 3/5] lxc: Replacing default strings definitions by g_autofree statement
  • From: Julio Faracco
• [PATCH v4 2/5] lxc: Add HPET device into allowed devices
  • From: Julio Faracco
• [PATCH v4 1/5] lxc: Add Real Time Clock device into allowed devices
  • From: Julio Faracco
• [PATCH v4 0/5] lxc: Add VCPU features for LXC
  • From: Julio Faracco
• Re: [PATCH 8/9] virStorageFileGetMetadataRecurse: Allow format probing under special circumstances
  • From: Daniel P. Berrangé
• Re: [PATCH] apparmor: allow to call vhost-user-gpu
  • From: Christian Ehrhardt
• Re: [PATCH 8/9] virStorageFileGetMetadataRecurse: Allow format probing under special circumstances
  • From: Peter Krempa
• Re: [libvirt PATCH 0/2] travis: Use dedicated images for MinGW builds
  • From: Andrea Bolognani
• Re: [libvirt PATCH] qemu: use correct backendType when checking memfd capability
  • From: Daniel P. Berrangé
• [libvirt PATCH] qemu: use correct backendType when checking memfd capability
  • From: Ján Tomko
• Re: [PATCH 0/3] Tighten qemu-img rules on missing backing format
  • From: Peter Krempa
• Re: [libvirt RFC PATCH] util: vireventglibwatch: watch for G_IO_HUP and G_IO_ERR
  • From: Daniel P. Berrangé
• Re: [PATCH 3/3] qemu-img: Deprecate use of -b without -F
  • From: Peter Krempa
• [libvirt-dockerfiles PATCH 2/2] Add Dockerfiles for MinGW cross-compilation
  • From: Andrea Bolognani
• [libvirt-dockerfiles PATCH 1/2] Refresh after turning MinGW into a cross-building target
  • From: Andrea Bolognani
• [libvirt-dockerfiles PATCH 0/2] Update for MinGW changes
  • From: Andrea Bolognani
• Re: [PATCH 0/3] Tighten qemu-img rules on missing backing format
  • From: Peter Krempa
• Re: [dockerfiles PATCH] refresh: Drop MinGW hacks
  • From: Andrea Bolognani
• Re: [libvirt PATCH 00/11] qemu: introduce a per-VM event loop thread
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 4/8] conf: rename virNetDevSupportBandwidth to virNetDevSupportsBandwidth
  • From: Pavel Mores
• Re: [libvirt PATCH] vz: Fix return value in error path
  • From: Ján Tomko
• Re: [libvirt PATCH] esx: Same order of arguments in definition and declaration
  • From: Ján Tomko
• [libvirt PATCH] vz: Fix return value in error path
  • From: Rikard Falkeborn
• [libvirt PATCH] esx: Same order of arguments in definition and declaration
  • From: Rikard Falkeborn
• Re: Requesting Guidance
  • From: Michal Privoznik
• [PATCH v1 10/12] add hostdev handling for bhyve
  • From: Ryan Moeller
• [PATCH v1 11/12] bhyve: command: enable booting from hostdevs
  • From: Ryan Moeller
• [PATCH v1 09/12] bhyve: parse_command: slot, bus, func -> bus, slot, func
  • From: Ryan Moeller
• [PATCH v1 12/12] Allow PCI functions up to 255 for PCI ARI
  • From: Ryan Moeller
• [PATCH v1 08/12] bhyve: command: refactor virBhyveProcessBuildBhyveCmd
  • From: Ryan Moeller
• [PATCH v1 07/12] bhyve: add reboot support
  • From: Ryan Moeller
• [PATCH v1 06/12] bhyve: add hooks
  • From: Ryan Moeller
• [PATCH v1 04/12] bhyve: monitor: Make bhyveMonitor a virClass
  • From: Ryan Moeller
• [PATCH v1 00/12] Bhyve driver improvements
  • From: Ryan Moeller
• [PATCH v1 03/12] bhyve: process: don't bother seeking to end of log
  • From: Ryan Moeller
• [PATCH v1 01/12] bhyve: process: remove unneeded header
  • From: Ryan Moeller
• [PATCH v1 02/12] conf: fix use after free
  • From: Ryan Moeller
• [PATCH v1 05/12] bhyve: monitor: refactor register/unregister
  • From: Ryan Moeller
• Re: [PATCH 01/16] Fix build errors on FreeBSD
  • From: Ryan Moeller
• [PATCH v3 5/5] lxc: Count max VCPUs based on cpuset.cpus in native config.
  • From: Julio Faracco
• [PATCH v3 4/5] lxc: Implement virtual /proc/cpuinfo via LXC fuse
  • From: Julio Faracco
• [PATCH v3 3/5] lxc: Replacing default strings definitions by g_autofree statement.
  • From: Julio Faracco
• [PATCH v3 2/5] lxc: Add HPET device into allowed devices
  • From: Julio Faracco
• [PATCH v3 1/5] lxc: Add Real Time Clock device into allowed devices
  • From: Julio Faracco
• [PATCH v3 0/5] lxc: Add VCPU features for LXC
  • From: Julio Faracco
• [PATCH v2 5/5] lxc: Count max VCPUs based on cpuset.cpus in native config.
  • From: Julio Faracco
• [PATCH v2 4/5] lxc: Implement virtual /proc/cpuinfo via LXC fuse
  • From: Julio Faracco
• [PATCH v2 3/5] lxc: Replacing default strings definitions by g_autofree statement.
  • From: Julio Faracco
• [PATCH v2 2/5] lxc: Add HPET device into allowed devices
  • From: Julio Faracco
• [PATCH v2 1/5] lxc: Add Real Time Clock device into allowed devices
  • From: Julio Faracco
• [PATCH v2 0/5] lxc: Add VCPU features for LXC
  • From: Julio Faracco
• Re: [libvirt PATCH] docs: add a kbase explaining security protections for QEMU passthrough
  • From: Ján Tomko
• Re: [jenkins-ci PATCH 0/8] lcitool: Support MinGW cross-build Dockerfiles
  • From: Ján Tomko
• Re: [PATCH 00/16] Bhyve driver improvements
  • From: Ján Tomko
• Re: [PATCH 14/16] Add hostdev handling for bhyve
  • From: Ján Tomko
• Re: [PATCH 06/16] Factor out conn
  • From: Ján Tomko
• Re: [PATCH 05/16] Eliminate rc variable
  • From: Ján Tomko
• Re: [PATCH 04/16] Fix indentation
  • From: Ján Tomko
• Re: [PATCH 03/16] Remove redundant parameter to virBhyveProcessStart()
  • From: Ján Tomko
• Re: [PATCH 02/16] Simplify bhyve driver caps helpers
  • From: Ján Tomko
• Re: [PATCH 01/16] Fix build errors on FreeBSD
  • From: Ján Tomko
• Re: [PATCH] storage: Add support to set{uid,gid} and sticky bit
  • From: Ján Tomko
• Re: [PATCH 7/7] virStorageFileGetMetadataFromFD: Remove unused 'backingFormat' argument
  • From: Ján Tomko
• Re: [PATCH 6/7] virStorageFileGetMetadataFromBuf: Remove 'backingFormat' argument
  • From: Ján Tomko
• Re: [PATCH 5/7] virStorageBackendGlusterRefreshVol: Refactor handling of backing store
  • From: Ján Tomko
• Re: [PATCH 4/7] virStorageSourceNewFromBacking: Also transfer the format
  • From: Ján Tomko
• Re: [PATCH 3/7] util: storage: Store backing store format in virStorageSource
  • From: Ján Tomko
• Re: [PATCH 2/7] virStorageSourceUpdateCapacity: Drop 'probe' argument
  • From: Ján Tomko
• Re: [PATCH 1/7] tests: virstorage: Fix backing file format of created image
  • From: Ján Tomko
• [libvirt PATCH 5/8] tools: virt-host-validate: move virutil.h include
  • From: Ján Tomko
• [libvirt PATCH 7/8] virsh: include virutil.h where used
  • From: Ján Tomko
• [libvirt PATCH 2/8] tests: include unistd.h instead of virutil.h
  • From: Ján Tomko
• [libvirt PATCH 8/8] Remove virutil.h from all header files
  • From: Ján Tomko
• [libvirt PATCH 4/8] util: virportallocator: add includes
  • From: Ján Tomko
• [libvirt PATCH 6/8] Include unistd.h where used
  • From: Ján Tomko
• [libvirt PATCH 1/8] Remove virutil.h where possible
  • From: Ján Tomko
• [libvirt PATCH 0/8] Reduce usage of virutil.h (include epistles)
  • From: Ján Tomko
• [libvirt PATCH 3/8] util: vircgroup: include unistd.h rather than virutil.h
  • From: Ján Tomko
• [libvirt PATCH 3/3] util: remove virHexToBin
  • From: Ján Tomko
• [libvirt PATCH 0/3] Remove usage of virHexToBin (glib chronicles)
  • From: Ján Tomko
• [libvirt PATCH 1/3] util: uuid: remove use of virHexToBin
  • From: Ján Tomko
• [libvirt PATCH 2/3] Remove all use of virHexToBin
  • From: Ján Tomko
• [libvirt PATCH 4/4] virclosecallbacks: move to src/hypervisor
  • From: Ján Tomko
• [libvirt PATCH 2/4] conf: move virHostdevIs functions
  • From: Ján Tomko
• [libvirt PATCH 3/4] virhostdev: move to src/hypervisor
  • From: Ján Tomko
• [libvirt PATCH 1/4] syntax-check: inclusion rule for src/hypervisor
  • From: Ján Tomko
• [libvirt PATCH 0/4] Do not depend on conf/ in util/
  • From: Ján Tomko
• [libvirt PATCH] syms: fix comment for domain_driver.h
  • From: Ján Tomko
• [libvirt PATCH] bhyve: command: remove unused includes
  • From: Ján Tomko
• Re: [PATCH v2 00/14] vircgroup code duplication purge
  • From: Ján Tomko
• Re: [PATCH v2 14/14] vircgroup: add virCgroupGetCpuPeriodQuota()
  • From: Ján Tomko
• Re: [PATCH v2 13/14] domain_cgroup.c: add virDomainCgroupSetMemoryLimitParameters()
  • From: Ján Tomko
• Re: [PATCH v2 12/14] domain_driver.c: add virDomainDriverSetupPersistentDefBlkioParams()
  • From: Ján Tomko
• Re: [PATCH v2 11/14] domain_cgroup.c: add virDomainCgroupSetupDomainBlkioParameters()
  • From: Ján Tomko
• Re: [PATCH v2 10/14] domain_driver.c: add virDomainDriverParseBlkioDeviceStr()
  • From: Ján Tomko
• Re: [PATCH v2 09/14] src/hypervisor: introduce domain_driver.c
  • From: Ján Tomko
• Re: [PATCH v2 08/14] vircgroup.c: add virCgroupSetupCpuPeriodQuota()
  • From: Ján Tomko
• Re: [PATCH v2 06/14] vircgroup.c: add virCgroupSetupCpusetCpus()
  • From: Ján Tomko
• Re: [PATCH v2 05/14] domain_cgroup.c: add virDomainCgroupSetupMemtune()
  • From: Ján Tomko
• Re: [PATCH v2 07/14] vircgroup.c: add virCgroupSetupCpuShares()
  • From: Ján Tomko
• Re: [PATCH v2 04/14] src: introducing hypervisor/domain_cgroup.c
  • From: Ján Tomko
• Re: [PATCH v2 03/14] vircgroup.c: turn virCgroup{Get/Set}BlkioDevice* into static
  • From: Ján Tomko
• Re: [PATCH v2 02/14] lxc, qemu: use virCgroupSetupBlkioDevice* helpers
  • From: Ján Tomko
• Re: [PATCH v2 01/14] vircgroup.c: adding virCgroupSetupBlkioDevice* helpers
  • From: Ján Tomko
• [libvirt PATCH] fix paths to openrc.init.in files
  • From: Ján Tomko
• Requesting Guidance
  • From: Ritish kr singh
• [libvirt PATCH 8/8] conf: include virnetworkportdef.h in domain_conf.h
  • From: Ján Tomko
• [libvirt PATCH 6/8] conf: do not pass vm object to virDomainClearNetBandwidth
  • From: Ján Tomko
• [libvirt PATCH 5/8] conf: virNetDevSupportsBandwidth: move into the C file
  • From: Ján Tomko
• [libvirt PATCH 3/8] conf: virnetworkportdef: include virnetdevmacvlan
  • From: Ján Tomko
• [libvirt PATCH 7/8] conf: reduce includes in virnetworkportdef.h
  • From: Ján Tomko
• [libvirt PATCH 2/8] bridge: include netdev_bandwidth_conf.h
  • From: Ján Tomko
• [libvirt PATCH 1/8] conf: virnwfilterbindingdef: include virxml.h
  • From: Ján Tomko
• Re: [PATCH] Add missing files for OpenRC
  • From: Michal Prívozník
• [libvirt PATCH 0/8] Include networkportdef.h in domain_conf.h
  • From: Ján Tomko
• [libvirt PATCH 4/8] conf: rename virNetDevSupportBandwidth to virNetDevSupportsBandwidth
  • From: Ján Tomko
• [libvirt PATCH 6/7] tests: link the libxl tests with libxltestdriver.la
  • From: Ján Tomko
• [libvirt PATCH 3/7] libxl: StateInitialize: use g_autofree
  • From: Ján Tomko
• [libvirt PATCH 7/7] tests: libxl: do not run the emulator
  • From: Ján Tomko
• [libvirt PATCH 1/7] testutilsxen: error out on initialization failure
  • From: Ján Tomko
• [libvirt PATCH 4/7] libxl: split out DriverConfigInit out of DriverConfigNew
  • From: Ján Tomko
• [libvirt PATCH 5/7] libxl: do not mock virFileMakePath
  • From: Ján Tomko
• [libvirt PATCH 0/7] tests: libxl: clean up test mocking
  • From: Ján Tomko
• [libvirt PATCH 2/7] libxl: conf: move default keepalive settings to libxlDriverConfigNew
  • From: Ján Tomko
• Re: [PATCH] Add missing files for OpenRC
  • From: Michal Prívozník
• Re: [libvirt PATCH 00/11] qemu: introduce a per-VM event loop thread
  • From: Michal Prívozník
• Re: [libvirt PATCH 01/11] qemu: drop support for agent connections on PTYs
  • From: Michal Prívozník
• Re: [libvirt PATCH 04/11] src: improve thread naming with human targetted names
  • From: Michal Prívozník
• Re: [libvirt PATCH 02/11] qemu: drop ability to open monitor from FD
  • From: Michal Prívozník
• Re: [libvirt PATCH 03/11] src: set the OS level thread name
  • From: Michal Privoznik
• [PATCH 3/3] qemu-img: Deprecate use of -b without -F
  • From: Eric Blake
• [PATCH 2/3] block: Add support to warn on backing file change without format
  • From: Eric Blake
• [PATCH 1/3] iotests: Specify explicit backing format where sensible
  • From: Eric Blake
• [PATCH 0/3] Tighten qemu-img rules on missing backing format
  • From: Eric Blake
• [PATCH 16/16] Allow PCI functions up to 255 for PCI ARI
  • From: Ryan Moeller
• [PATCH 10/16] Add hooks for bhyve backend
  • From: Ryan Moeller
• [PATCH 15/16] Enable booting from hostdevs with bhyve
  • From: Ryan Moeller
• [PATCH 14/16] Add hostdev handling for bhyve
  • From: Ryan Moeller
• [PATCH 13/16] Reorder slot,bus,func -> bus,slot,func in parsers
  • From: Ryan Moeller
• [PATCH 04/16] Fix indentation
  • From: Ryan Moeller
• [PATCH 07/16] Don't bother seeking to the end of a file opened O_APPEND
  • From: Ryan Moeller
• [PATCH 09/16] Refactor bhyve monitor register/unregister
  • From: Ryan Moeller
• [PATCH 11/16] Add reboot support for bhyve backend
  • From: Ryan Moeller
• [PATCH 12/16] Refactor virBhyveProcessBuildBhyveCmd a bit
  • From: Ryan Moeller
• [PATCH 08/16] Make bhyveMonitor a virClass
  • From: Ryan Moeller
• [PATCH 06/16] Factor out conn
  • From: Ryan Moeller
• [PATCH 03/16] Remove redundant parameter to virBhyveProcessStart()
  • From: Ryan Moeller
• [PATCH 05/16] Eliminate rc variable
  • From: Ryan Moeller
• [PATCH 02/16] Simplify bhyve driver caps helpers
  • From: Ryan Moeller
• [PATCH 00/16] Bhyve driver improvements
  • From: Ryan Moeller
• [PATCH 01/16] Fix build errors on FreeBSD
  • From: Ryan Moeller
• [PATCH] Add missing files for OpenRC
  • From: Ryan Moeller
• [libvirt PATCH 5/7] virsystemdtest: do not leak socket path
  • From: Ján Tomko
• [libvirt PATCH 6/7] qemumonitorjsontest: GetCPUModelComparison: use g_auto
  • From: Ján Tomko
• [libvirt PATCH 7/7] qemumonitorjsontest: GetCPUModelBaseline: use g_auto
  • From: Ján Tomko
• [libvirt PATCH 4/7] qemumonitorjsontest: use virCPUDefNew()
  • From: Ján Tomko
• [libvirt PATCH 2/7] tests: valgrind: do not trace system binaries
  • From: Ján Tomko
• [libvirt PATCH 3/7] qemumonitorjsontest: do not leak qapiData.schema
  • From: Ján Tomko
• [libvirt PATCH 1/7] tests: valgrind.supp: suppress g_type_register_static leaks
  • From: Ján Tomko
• [libvirt PATCH 0/7] valgrind-inspired fixes
  • From: Ján Tomko
• [PATCH] util: virhostcpu: Fail when fetching CPU Stats for invalid cpu
  • From: Mauro S. M. Rodrigues
• Re: [PATCH] storage: Add support to set{uid,gid} and sticky bit
  • From: Julio Faracco
• [jenkins-ci PATCH] guests: Update vault
  • From: Andrea Bolognani
• [PATCH 5/7] virStorageBackendGlusterRefreshVol: Refactor handling of backing store
  • From: Peter Krempa
• [PATCH 7/7] virStorageFileGetMetadataFromFD: Remove unused 'backingFormat' argument
  • From: Peter Krempa
• [PATCH 6/7] virStorageFileGetMetadataFromBuf: Remove 'backingFormat' argument
  • From: Peter Krempa
• [PATCH 3/7] util: storage: Store backing store format in virStorageSource
  • From: Peter Krempa
• [PATCH 2/7] virStorageSourceUpdateCapacity: Drop 'probe' argument
  • From: Peter Krempa
• [PATCH 4/7] virStorageSourceNewFromBacking: Also transfer the format
  • From: Peter Krempa
• [PATCH 1/7] tests: virstorage: Fix backing file format of created image
  • From: Peter Krempa
• [PATCH 0/7] util: More storage file detection cleanups
  • From: Peter Krempa
• Libvirt got accepted to GSoC 2020
  • From: Michal Privoznik
• Re: [PATCH V4 0/5] Introduce Advanced Watch Dog module
  • From: Zhang, Chen
• Re: [ruby PATCH] Fix cpumap allocation for virDomainGetVcpus and use return value
  • From: Ján Tomko
• Re: [PATCH 3/3] qemuTestParseCapabilitiesArch: Free @binary
  • From: Ján Tomko
• Re: [PATCH 2/3] virDomainNetDefClear: Free @persistent name
  • From: Ján Tomko
• Re: [libvirt RFC PATCH] util: vireventglibwatch: watch for G_IO_HUP and G_IO_ERR
  • From: Michal Privoznik
• Re: [PATCH 1/3] virDomainFSDefFree: Unref private data
  • From: Ján Tomko
• Re: [libvirt PATCH] docs: Expand documentation for the tickpolicy timer attribute
  • From: Michal Privoznik
• Re: [PATCH v1 0/3] qemumonitorjson tests for cpu compare and baseline
  • From: Michal Privoznik
• [PATCH 3/3] security: Don't fail if locking a file on NFS mount fails
  • From: Michal Privoznik
• [PATCH 2/3] security: Don't remember seclabel for paths we haven't locked successfully
  • From: Michal Privoznik
• [PATCH 1/3] virSecurityManagerMetadataLock: Store locked paths
  • From: Michal Privoznik
• [PATCH 0/3] security: Don't fail if locking a file on NFS mount fails
  • From: Michal Privoznik
• [PATCH 0/3] Couple of memleak fixes
  • From: Michal Privoznik
• [PATCH 2/3] virDomainNetDefClear: Free @persistent name
  • From: Michal Privoznik
• [PATCH 3/3] qemuTestParseCapabilitiesArch: Free @binary
  • From: Michal Privoznik
• [PATCH 1/3] virDomainFSDefFree: Unref private data
  • From: Michal Privoznik
• [PATCH v1 3/3] qemumonitorjsontest: add test for cpu baseline
  • From: Collin Walling
• [PATCH v1 0/3] qemumonitorjson tests for cpu compare and baseline
  • From: Collin Walling
• [PATCH v1 1/3] qemumonitorjsontest: load schema based on specified arch
  • From: Collin Walling
• [PATCH v1 2/3] qemumonitorjsontest: add tests for cpu comparison
  • From: Collin Walling
• Re: [libvirt PATCH] m4: libxl: properly fail when libxl is required
  • From: Andrea Bolognani
• Re: [PATCH] storage: Add support to set{uid,gid} and sticky bit
  • From: Ján Tomko
• [libvirt PATCH] m4: libxl: properly fail when libxl is required
  • From: Ján Tomko
• [libvirt PATCHv4 06/15] conf: qemu: add virtiofs fsdriver type
  • From: Ján Tomko
• [libvirt PATCHv4 07/15] conf: add virtiofs-related elements and attributes
  • From: Ján Tomko
• [libvirt PATCHv4 03/15] qemuExtDevicesStart: pass logManager
  • From: Ján Tomko
• [libvirt PATCHv4 13/15] qemu: use the vhost-user schemas to find binary
  • From: Ján Tomko
• [libvirt PATCHv4 12/15] qemu: put virtiofsd in the emulator cgroup
  • From: Ján Tomko
• [libvirt PATCHv4 02/15] schema: wrap fsDriver in a choice group
  • From: Ján Tomko
• [libvirt PATCHv4 14/15] qemu: build vhost-user-fs device command line
  • From: Ján Tomko
• [libvirt PATCHv4 10/15] qemu: forbid migration with vhost-user-fs device
  • From: Ján Tomko
• [libvirt PATCHv4 11/15] qemu: add code for handling virtiofsd
  • From: Ján Tomko
• [libvirt PATCHv4 08/15] qemu: add virtiofsd_debug to qemu.conf
  • From: Ján Tomko
• [libvirt PATCHv4 09/15] qemu: validate virtiofs filesystems
  • From: Ján Tomko
• [libvirt PATCHv4 05/15] docs: add virtiofs kbase
  • From: Ján Tomko
• [libvirt PATCHv4 15/15] wip: SELinux integration for virtiofsd
  • From: Ján Tomko
• [libvirt PATCHv4 01/15] docs: reduce excessive spacing in ToC for RST files
  • From: Ján Tomko
• [libvirt PATCHv4 04/15] qemu: add QEMU_CAPS_VHOST_USER_FS
  • From: Ján Tomko
• [libvirt PATCHv4 00/15] add virtiofs support (virtio-fs epopee)
  • From: Ján Tomko
• Re: [jenkins-ci PATCH 0/8] lcitool: Support MinGW cross-build Dockerfiles
  • From: Andrea Bolognani
• Re: [PATCH 0/3] Couple of almost trivial patches
  • From: Ján Tomko
• [PATCH 2/3] qemu: Don't explicitly remove pidfile after virPidFileForceCleanupPath()
  • From: Michal Privoznik
• [PATCH 3/3] qemu_migration: Rearrange some checks in qemuMigrationSrcIsAllowed()
  • From: Michal Privoznik
• [PATCH 1/3] virpidfile: Set correct retval in virPidFileReadPath()
  • From: Michal Privoznik
• [PATCH 0/3] Couple of almost trivial patches
  • From: Michal Privoznik
• [ruby PATCH] Fix cpumap allocation for virDomainGetVcpus and use return value
  • From: Charlie Smurthwaite
• Re: [PATCH 7/8] qemu: add dbus-vmstate helper migration support
  • From: Michal Privoznik
• Re: [PATCH 0/8] Second take on slirp-helper & dbus-vmstate
  • From: Michal Privoznik
• Re: [PATCH 4/8] qemu: add a DBus daemon helper unit
  • From: Michal Privoznik
• Re: [PATCH 3/8] qemu-conf: add dbusStateDir
  • From: Michal Privoznik
• Re: [PATCH 1/8] qemu: remove dbus-vmstate code
  • From: Michal Privoznik
• Re: [PATCH 5/8] domain: save/restore the state of dbus-daemon running
  • From: Michal Privoznik
• Re: [PATCH 6/8] qemu: prepare and stop the dbus daemon
  • From: Michal Privoznik
• Re: [PATCH 2/8] qemu-conf: add configurable dbus-daemon location
  • From: Michal Privoznik
• Re: [PATCH 8/8] qemu-slirp: register helper for migration
  • From: Michal Privoznik
• Re: [libvirt PATCH 05/10] conf: parse/format <portOptions isolated='yes|no'/>
  • From: Laine Stump
• Re: [PATCH 3/4] lxc: Implement virtual /proc/cpuinfo via LXC fuse
  • From: Julio Faracco
• [PATCH] storage: Add support to set{uid,gid} and sticky bit
  • From: Julio Faracco
• Re: [PATCH 8/9] virStorageFileGetMetadataRecurse: Allow format probing under special circumstances
  • From: Eric Blake
• Re: [PATCH 8/9] virStorageFileGetMetadataRecurse: Allow format probing under special circumstances
  • From: Peter Krempa
• Re: [PATCH 8/9] virStorageFileGetMetadataRecurse: Allow format probing under special circumstances
  • From: Eric Blake
• Re: [PATCH 8/9] virStorageFileGetMetadataRecurse: Allow format probing under special circumstances
  • From: Peter Krempa
• Re: [PATCH 9/9] WIP: Add tool for probing images
  • From: Peter Krempa
• Re: [PATCH 8/9] virStorageFileGetMetadataRecurse: Allow format probing under special circumstances
  • From: Eric Blake
• Re: [PATCH 8/9] virStorageFileGetMetadataRecurse: Allow format probing under special circumstances
  • From: Peter Krempa
• Re: [PATCH 9/9] WIP: Add tool for probing images
  • From: Eric Blake
• Re: [PATCH 8/9] virStorageFileGetMetadataRecurse: Allow format probing under special circumstances
  • From: Eric Blake
• Re: [PATCH 7/9] virStorageFileGetMetadataRecurse: Remove 'cleanup' label
  • From: Eric Blake
• Re: [PATCH 6/9] virStorageFileGetMetadataRecurse: Extract storage access
  • From: Eric Blake
• Re: [PATCH 5/9] virStorageFileGetMetadataRecurse: Use virHashHasEntry instead of fake pointers
  • From: Eric Blake
• Re: [PATCH 4/9] virStorageFileGetMetadataRecurse: Expect NULL src->path
  • From: Eric Blake
• Re: [PATCH 3/9] virStorageFileGetMetadataRecurse: Shuffle around assignment of backing chain depth
  • From: Eric Blake
• Re: [PATCH 2/9] virStorageFileGetMetadataRecurse: Remove impossible error report
  • From: Eric Blake
• Re: [PATCH 1/9] util: storagefile: Drop image format probing by file suffix
  • From: Peter Krempa
• Re: [PATCH 1/9] util: storagefile: Drop image format probing by file suffix
  • From: Eric Blake
• Re: [PATCH v2 0/2] finish qemu-nbd --partition deprecation
  • From: Eric Blake
• Re: [libvirt PATCH 2/2] cpu_conf: Format vendor_id for host-model CPUs
  • From: Ján Tomko
• Re: [libvirt PATCH 1/2] qemuxml2xmltest: Add case for host-model vendor_id
  • From: Ján Tomko
• [libvirt PATCH 2/2] cpu_conf: Format vendor_id for host-model CPUs
  • From: Jiri Denemark
• [libvirt PATCH 1/2] qemuxml2xmltest: Add case for host-model vendor_id
  • From: Jiri Denemark
• [libvirt PATCH 0/2] cpu_conf: Format vendor_id for host-model CPUs
  • From: Jiri Denemark
• Re: [libvirt RFC PATCH] util: vireventglibwatch: watch for G_IO_HUP and G_IO_ERR
  • From: Andrea Bolognani
• Re: [PATCH 4/4] lxc: Count max VCPUs based on cpuset.cpus in native config.
  • From: Daniel Henrique Barboza
• Re: [PATCH 3/4] lxc: Implement virtual /proc/cpuinfo via LXC fuse
  • From: Daniel Henrique Barboza
• Re: [PATCH 1/4] lxc: Add Real Time Clock device into allowed devices
  • From: Daniel Henrique Barboza
• Re: [PATCH v2 0/2] finish qemu-nbd --partition deprecation
  • From: Max Reitz
• Re: [libvirt PATCH 09/10] conf: extra validation for <portOptions isolated='yes'/>
  • From: Ján Tomko
• Re: [PATCH] qemuDomainGetStatsIOThread: Don't leak array with 0 iothreads
  • From: Ján Tomko
• [PATCH] qemuDomainGetStatsIOThread: Don't leak array with 0 iothreads
  • From: Peter Krempa
• Re: [libvirt PATCH 05/10] conf: parse/format <portOptions isolated='yes|no'/>
  • From: Laine Stump
• Re: [libvirt PATCH 07/10] qemu/lxc: plumb isolatedPort from config down through bridge attachment
  • From: Laine Stump
• Re: [libvirt PATCH 09/10] conf: extra validation for <portOptions isolated='yes'/>
  • From: Laine Stump
• Re: [libvirt PATCH 5/6] Make PATHs unique for a VM object instance
  • From: Shaju Abraham
• Re: virtlogd spinning on 100% CPU with the latest libvirt
  • From: Ján Tomko
• [libvirt RFC PATCH] util: vireventglibwatch: watch for G_IO_HUP and G_IO_ERR
  • From: Ján Tomko
• [libvirt PATCH] docs: Expand documentation for the tickpolicy timer attribute
  • From: Andrea Bolognani
• Re: virtlogd spinning on 100% CPU with the latest libvirt
  • From: Andrea Bolognani
• Re: [libvirt PATCH] docs: reduce excessive spacing in ToC for RST files
  • From: Ján Tomko
• Re: [libvirt PATCH 10/10] docs: add info about <portOptions isolated='yes'/> to news file
  • From: Ján Tomko
• Re: [libvirt PATCH 09/10] conf: extra validation for <portOptions isolated='yes'/>
  • From: Ján Tomko
• Re: [libvirt PATCH 08/10] qemu: support updating <portOptions isolated='yes|no'/> during device update
  • From: Ján Tomko
• Re: [libvirt PATCH 07/10] qemu/lxc: plumb isolatedPort from config down through bridge attachment
  • From: Ján Tomko
• Re: [libvirt PATCH 06/10] network: propagate <portOptions isolated='yes'/> between network and domain
  • From: Ján Tomko
• Re: [libvirt PATCH 05/10] conf: parse/format <portOptions isolated='yes|no'/>
  • From: Ján Tomko
• [PATCH v2 06/14] vircgroup.c: add virCgroupSetupCpusetCpus()
  • From: Daniel Henrique Barboza
• [PATCH v2 12/14] domain_driver.c: add virDomainDriverSetupPersistentDefBlkioParams()
  • From: Daniel Henrique Barboza
• [PATCH v2 10/14] domain_driver.c: add virDomainDriverParseBlkioDeviceStr()
  • From: Daniel Henrique Barboza
• [PATCH v2 13/14] domain_cgroup.c: add virDomainCgroupSetMemoryLimitParameters()
  • From: Daniel Henrique Barboza
• [PATCH v2 14/14] vircgroup: add virCgroupGetCpuPeriodQuota()
  • From: Daniel Henrique Barboza
• [PATCH v2 09/14] src/hypervisor: introduce domain_driver.c
  • From: Daniel Henrique Barboza
• [PATCH v2 07/14] vircgroup.c: add virCgroupSetupCpuShares()
  • From: Daniel Henrique Barboza
• [PATCH v2 11/14] domain_cgroup.c: add virDomainCgroupSetupDomainBlkioParameters()
  • From: Daniel Henrique Barboza
• [PATCH v2 05/14] domain_cgroup.c: add virDomainCgroupSetupMemtune()
  • From: Daniel Henrique Barboza
• [PATCH v2 08/14] vircgroup.c: add virCgroupSetupCpuPeriodQuota()
  • From: Daniel Henrique Barboza
• [PATCH v2 00/14] vircgroup code duplication purge
  • From: Daniel Henrique Barboza
• [PATCH v2 01/14] vircgroup.c: adding virCgroupSetupBlkioDevice* helpers
  • From: Daniel Henrique Barboza
• [PATCH v2 04/14] src: introducing hypervisor/domain_cgroup.c
  • From: Daniel Henrique Barboza
• [PATCH v2 02/14] lxc,qemu: use virCgroupSetupBlkioDevice* helpers
  • From: Daniel Henrique Barboza
• [PATCH v2 03/14] vircgroup.c: turn virCgroup{Get/Set}BlkioDevice* into static
  • From: Daniel Henrique Barboza
• virtlogd spinning on 100% CPU with the latest libvirt
  • From: Richard W.M. Jones
• [PATCH 8/9] virStorageFileGetMetadataRecurse: Allow format probing under special circumstances
  • From: Peter Krempa
• [PATCH 5/9] virStorageFileGetMetadataRecurse: Use virHashHasEntry instead of fake pointers
  • From: Peter Krempa
• [PATCH 9/9] WIP: Add tool for probing images
  • From: Peter Krempa
• [PATCH 6/9] virStorageFileGetMetadataRecurse: Extract storage access
  • From: Peter Krempa
• [PATCH 3/9] virStorageFileGetMetadataRecurse: Shuffle around assignment of backing chain depth
  • From: Peter Krempa
• [PATCH 7/9] virStorageFileGetMetadataRecurse: Remove 'cleanup' label
  • From: Peter Krempa
• [PATCH 2/9] virStorageFileGetMetadataRecurse: Remove impossible error report
  • From: Peter Krempa
• [PATCH 4/9] virStorageFileGetMetadataRecurse: Expect NULL src->path
  • From: Peter Krempa
• [PATCH 1/9] util: storagefile: Drop image format probing by file suffix
  • From: Peter Krempa
• [PATCH 0/9] Re-think the stance towards image format probing
  • From: Peter Krempa
• Re: [libvirt PATCH v2 1/6] qemu: test if bandwidth has 'floor' factored out to separate function
  • From: Michal Privoznik
• Re: [libvirt PATCH v2 0/6] qemu: add stricter checks of permissibility of the QoS parameter 'floor'
  • From: Michal Privoznik
• Re: [libvirt PATCH v2 2/6] qemu: add function to test if network supports setting 'floor'
  • From: Michal Privoznik
• Re: [PATCH v3 00/15] qemu: Handle 'size' and 'offset' attributes of 'raw' format
  • From: Richard W.M. Jones
• Re: [libvirt PATCH v2] docs: add news item about gnulib removal
  • From: Andrea Bolognani
• Re: [libvirt PATCH 04/10] util: query/set BR_ISOLATED flag on netdevs attached to bridge
  • From: Ján Tomko
• Re: [libvirt PATCH 03/10] qemu: save/restore original error when recovering from failed bridge attach
  • From: Ján Tomko
• Re: [libvirt PATCH 02/10] schema: add missing vlan element to networkport RNG
  • From: Ján Tomko
• Re: [libvirt PATCH 01/10] schema: trivial indentation fix
  • From: Ján Tomko
• [libvirt PATCH 01/10] schema: trivial indentation fix
  • From: Laine Stump
• [libvirt PATCH 10/10] docs: add info about <portOptions isolated='yes'/> to news file
  • From: Laine Stump
• [libvirt PATCH 07/10] qemu/lxc: plumb isolatedPort from config down through bridge attachment
  • From: Laine Stump
• [libvirt PATCH 03/10] qemu: save/restore original error when recovering from failed bridge attach
  • From: Laine Stump
• [libvirt PATCH 08/10] qemu: support updating <portOptions isolated='yes|no'/> during device update
  • From: Laine Stump
• [libvirt PATCH 09/10] conf: extra validation for <portOptions isolated='yes'/>
  • From: Laine Stump
• [libvirt PATCH 04/10] util: query/set BR_ISOLATED flag on netdevs attached to bridge
  • From: Laine Stump
• [libvirt PATCH 06/10] network: propagate <portOptions isolated='yes'/> between network and domain
  • From: Laine Stump
• [libvirt PATCH 02/10] schema: add missing vlan element to networkport RNG
  • From: Laine Stump
• [libvirt PATCH 05/10] conf: parse/format <portOptions isolated='yes|no'/>
  • From: Laine Stump
• [libvirt PATCH 00/10] support BR_ISOLATED flag for guest interfaces attached to a Linux host bridge
  • From: Laine Stump
• [PATCH 4/4] lxc: Count max VCPUs based on cpuset.cpus in native config.
  • From: Julio Faracco
• [PATCH 2/4] lxc: Add HPET device into allowed devices
  • From: Julio Faracco
• [PATCH 1/4] lxc: Add Real Time Clock device into allowed devices
  • From: Julio Faracco
• [PATCH 0/4] lxc: Add VCPU features for LXC
  • From: Julio Faracco
• [PATCH 3/4] lxc: Implement virtual /proc/cpuinfo via LXC fuse
  • From: Julio Faracco
• [rust PATCH] Implement virStoragePoolListAllVolumes and virStoragePoolListVolumes for StoragePool
  • From: mathias
• Re: Questions about using qemuProcess API within a libvirt test
  • From: Collin Walling
• Re: [PATCH] apparmor: allow to call vhost-user-gpu
  • From: Jim Fehlig
• Re: [PATCH] apparmor: allow to call vhost-user-gpu
  • From: Christian Ehrhardt
• Re: [libvirt PATCH 05/11] src: introduce an abstraction for running event loops
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH] docs: add news item about GNULIB removal
  • From: Andrea Bolognani
• Re: [PATCH] apparmor: allow to call vhost-user-gpu
  • From: Jim Fehlig
• Re: [libvirt PATCH] docs: add news item about GNULIB removal
  • From: Daniel P. Berrangé
• [libvirt PATCH v2] docs: add news item about gnulib removal
  • From: Daniel P. Berrangé
• [libvirt PATCH v2 1/6] qemu: test if bandwidth has 'floor' factored out to separate function
  • From: Pavel Mores
• [libvirt PATCH v2 6/6] docs: QoS parameter 'floor' is supported for 'open' networks too
  • From: Pavel Mores
• [libvirt PATCH v2 4/6] qemu: check if 'floor' is supported for given interface and network
  • From: Pavel Mores
• [libvirt PATCH v2 5/6] qemu: call networkPlugBandwidth() for all types of network
  • From: Pavel Mores
• [libvirt PATCH v2 3/6] qemu: fail on attempt to set 'floor' if interface type is not 'network'
  • From: Pavel Mores
• [libvirt PATCH v2 2/6] qemu: add function to test if network supports setting 'floor'
  • From: Pavel Mores
• [libvirt PATCH v2 0/6] qemu: add stricter checks of permissibility of the QoS parameter 'floor'
  • From: Pavel Mores
• Re: [PATCH v3 12/15] tests: qemublock: Add cases for creating image overlays on top of disks with <slice>
  • From: Ján Tomko
• Re: [libvirt PATCH 08/11] tests: start/stop an event thread for QEMU monitor/agent tests
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 07/11] qemu: start/stop an event thread for QMP probing
  • From: Daniel P. Berrangé
• Re: [PATCH] qemu_domain: Modify access to a NVMe disk iff needed
  • From: Ján Tomko
• [PATCH] qemu_domain: Modify access to a NVMe disk iff needed
  • From: Michal Privoznik
• Re: [libvirt PATCH 08/11] tests: start/stop an event thread for QEMU monitor/agent tests
  • From: Ján Tomko
• Re: [libvirt PATCH 07/11] qemu: start/stop an event thread for QMP probing
  • From: Ján Tomko
• [libvirt PATCH 08/11] tests: start/stop an event thread for QEMU monitor/agent tests
  • From: Daniel P. Berrangé
• [libvirt PATCH 11/11] qemu: convert agent to use the per-VM event loop
  • From: Daniel P. Berrangé
• [libvirt PATCH 10/11] qemu: fix variable naming in agent code
  • From: Daniel P. Berrangé
• [libvirt PATCH 09/11] qemu: convert monitor to use the per-VM event loop
  • From: Daniel P. Berrangé
• [libvirt PATCH 07/11] qemu: start/stop an event thread for QMP probing
  • From: Daniel P. Berrangé
• [libvirt PATCH 03/11] src: set the OS level thread name
  • From: Daniel P. Berrangé
• [libvirt PATCH 05/11] src: introduce an abstraction for running event loops
  • From: Daniel P. Berrangé
• [libvirt PATCH 02/11] qemu: drop ability to open monitor from FD
  • From: Daniel P. Berrangé
• [libvirt PATCH 06/11] qemu: start/stop an event loop thread for domains
  • From: Daniel P. Berrangé
• [libvirt PATCH 04/11] src: improve thread naming with human targetted names
  • From: Daniel P. Berrangé
• [libvirt PATCH 00/11] qemu: introduce a per-VM event loop thread
  • From: Daniel P. Berrangé
• [libvirt PATCH 01/11] qemu: drop support for agent connections on PTYs
  • From: Daniel P. Berrangé
• Re: [PATCH v3 12/15] tests: qemublock: Add cases for creating image overlays on top of disks with <slice>
  • From: Peter Krempa
• Re: [PATCH v3 06/15] qemuDomainValidateStorageSource: Reject unsupported slices
  • From: Peter Krempa
• Re: [PATCH 0/8] Second take on slirp-helper & dbus-vmstate
  • From: Marc-André Lureau
• Re: [libvirt PATCH v2 3/8] conf: Introduce VIR_DOMAIN_TIMER_NAME_ARMVTIMER
  • From: Andrea Bolognani
• Re: [libvirt PATCH v2 3/8] conf: Introduce VIR_DOMAIN_TIMER_NAME_ARMVTIMER
  • From: Andrew Jones
• Re: [libvirt PATCH v2 4/8] qemu: Validate configuration for the armvtimer timer
  • From: Ján Tomko
• Re: [libvirt PATCH v2 6/8] tests: Add test case for the armvtimer timer
  • From: Andrea Bolognani
• Re: [libvirt PATCH v2 4/8] qemu: Validate configuration for the armvtimer timer
  • From: Andrea Bolognani
• Re: [libvirt PATCH v2 3/8] conf: Introduce VIR_DOMAIN_TIMER_NAME_ARMVTIMER
  • From: Andrea Bolognani
• Re: [PATCH v3 14/15] tests: qemu: Add test data for the new <slice> element
  • From: Ján Tomko
• Re: [PATCH v3 15/15] virStorageSourceParseBackingJSONRaw: Parse 'offset' and 'size' attributes
  • From: Ján Tomko
• Re: [PATCH v3 13/15] qemu: Add support for slices of type 'storage'
  • From: Ján Tomko
• Re: [PATCH v3 12/15] tests: qemublock: Add cases for creating image overlays on top of disks with <slice>
  • From: Ján Tomko
• Re: [PATCH v3 11/15] qemu: block: Properly format storage slice into backing store strings
  • From: Ján Tomko
• Re: [PATCH v3 10/15] qemu: domain: Store nodenames of slice in status XML
  • From: Ján Tomko
• Re: [PATCH v3 09/15] conf: Implement support for <slices> of disk source
  • From: Ján Tomko
• Re: [PATCH v3 08/15] docs: Document the new <slices> sub-element of disk's <source>
  • From: Ján Tomko
• Re: [PATCH v3 06/15] qemuDomainValidateStorageSource: Reject unsupported slices
  • From: Ján Tomko
• Re: [PATCH v3 07/15] qemu: block: forbid creation of storage sources with <slice>
  • From: Ján Tomko
• Re: [PATCH v3 05/15] qemuBlockStorageSourceGetFormatRawProps: format 'offset' and 'size' for slice
  • From: Ján Tomko
• Re: [PULL 00/10] Ui 20200212 patches
  • From: Peter Maydell
• Re: [PATCH v3 04/15] util: virstoragefile: Add data structure for storing storage source slices
  • From: Ján Tomko
• Re: [PATCH v3 03/15] tests: virstorage: Add test data for json specified raw image with offset/size
  • From: Ján Tomko
• Re: [PATCH v3 01/15] qemu: domain: Refactor formatting of node names into status XML
  • From: Ján Tomko
• Re: [PATCH v3 02/15] docs: formatdomain: Close <source> on one of disk examples
  • From: Ján Tomko
• Re: [libvirt PATCH v2 8/8] news: Mention the armvtimer timer
  • From: Ján Tomko
• Re: [libvirt PATCH v2 7/8] docs: List the armvtimer timer among all others
  • From: Ján Tomko
• Re: [libvirt PATCH v2 6/8] tests: Add test case for the armvtimer timer
  • From: Ján Tomko
• Re: [libvirt PATCH v2 5/8] qemu: Format the armvtimer timer on the command line
  • From: Ján Tomko
• Re: [libvirt PATCH v2 4/8] qemu: Validate configuration for the armvtimer timer
  • From: Ján Tomko
• Re: [libvirt PATCH v2 3/8] conf: Introduce VIR_DOMAIN_TIMER_NAME_ARMVTIMER
  • From: Ján Tomko
• Re: [libvirt PATCH v2 2/8] qemu: Add the QEMU_CAPS_CPU_KVM_NO_ADJVTIME capability
  • From: Ján Tomko
• Re: [libvirt PATCH v2 1/8] qemu: Use switch statement in qemuBuildCpuCommandLine()
  • From: Ján Tomko
• [PATCH] apparmor: allow to call vhost-user-gpu
  • From: Christian Ehrhardt
• Re: [rust PATCH 1/3] Implement virStoragePoolListAllVolumes and virStoragePoolListVolumes for StoragePool
  • From: Sahid Orentino Ferdjaoui
• [PATCH v3 08/15] docs: Document the new <slices> sub-element of disk's <source>
  • From: Peter Krempa
• [PATCH v3 12/15] tests: qemublock: Add cases for creating image overlays on top of disks with <slice>
  • From: Peter Krempa
• [PATCH v3 10/15] qemu: domain: Store nodenames of slice in status XML
  • From: Peter Krempa
• [PATCH v3 00/15] qemu: Handle 'size' and 'offset' attributes of 'raw' format
  • From: Peter Krempa
• [PATCH v3 15/15] virStorageSourceParseBackingJSONRaw: Parse 'offset' and 'size' attributes
  • From: Peter Krempa
• [PATCH v3 11/15] qemu: block: Properly format storage slice into backing store strings
  • From: Peter Krempa
• [PATCH v3 13/15] qemu: Add support for slices of type 'storage'
  • From: Peter Krempa
• [PATCH v3 07/15] qemu: block: forbid creation of storage sources with <slice>
  • From: Peter Krempa
• [PATCH v3 14/15] tests: qemu: Add test data for the new <slice> element
  • From: Peter Krempa
• [PATCH v3 06/15] qemuDomainValidateStorageSource: Reject unsupported slices
  • From: Peter Krempa
• [PATCH v3 04/15] util: virstoragefile: Add data structure for storing storage source slices
  • From: Peter Krempa
• [PATCH v3 09/15] conf: Implement support for <slices> of disk source
  • From: Peter Krempa
• [PATCH v3 05/15] qemuBlockStorageSourceGetFormatRawProps: format 'offset' and 'size' for slice
  • From: Peter Krempa
• [PATCH v3 01/15] qemu: domain: Refactor formatting of node names into status XML
  • From: Peter Krempa
• [PATCH v3 03/15] tests: virstorage: Add test data for json specified raw image with offset/size
  • From: Peter Krempa
• [PATCH v3 02/15] docs: formatdomain: Close <source> on one of disk examples
  • From: Peter Krempa
• Re: [PATCH v2 6/7] apparmor: Allow some more BIOS/UEFI paths
  • From: Michal Privoznik
• [PULL 02/10] ui/gtk: Fix gd_refresh_rate_millihz() when widget window is not realized
  • From: Gerd Hoffmann
• [PULL 07/10] ui/gtk: implement show-cursor option
  • From: Gerd Hoffmann
• [PULL 09/10] ui: deprecate legacy -show-cursor option
  • From: Gerd Hoffmann
• [PULL 06/10] ui/cocoa: switch to new show-cursor option
  • From: Gerd Hoffmann
• [PULL 10/10] ui/cocoa: Drop workarounds for pre-10.12 OSX
  • From: Gerd Hoffmann
• [PULL 08/10] ui: drop curor_hide global variable.
  • From: Gerd Hoffmann
• [PULL 04/10] ui: wire up legacy -show-cursor option
  • From: Gerd Hoffmann
• [PULL 05/10] ui/sdl: switch to new show-cursor option
  • From: Gerd Hoffmann
• [PULL 00/10] Ui 20200212 patches
  • From: Gerd Hoffmann
• [PULL 03/10] ui: add show-cursor option
  • From: Gerd Hoffmann
• [PULL 01/10] ui/gtk: Update gd_refresh_rate_millihz() to handle VirtualConsole
  • From: Gerd Hoffmann
• Re: [libvirt PATCH v2] qemu: drop support for monitor connections on PTYs
  • From: Peter Krempa
• Re: [PATCH 1/2] qemu: monitor:Prevent a NULl pointer from being accessed
  • From: Peter Krempa
• Re: [PATCH] util: Prevent a NULl pointer from being accessed
  • From: Peter Krempa
• Re: [PATCH] util: Prevent a NULl pointer from being accessed
  • From: Peter Krempa
• [PATCH] util: Prevent a NULl pointer from being accessed
  • From: Yi Wang
• [PATCH] util: Prevent a NULl pointer from being accessed
  • From: Yi Wang
• [PATCH 1/2] qemu: monitor:Prevent a NULl pointer from being accessed
  • From: Yi Wang
• Re: [PATCH v3 5/7] ui/gtk: implement show-cursor option
  • From: Gerd Hoffmann
• [libvirt PATCH v2] qemu: drop support for monitor connections on PTYs
  • From: Daniel P. Berrangé
• [libvirt PATCH] qemu: drop support for monitor connections on PTYs
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 1/5] qemu: fail on attempt to set 'floor' if interface type is not 'network'
  • From: Pavel Hrdina
• Re: [libvirt PATCH 2/5] qemu: check if 'floor' is supported for given interface and network
  • From: Ján Tomko
• Re: [PATCH v2 6/7] apparmor: Allow some more BIOS/UEFI paths
  • From: Christian Ehrhardt
• Re: [patch v2 1/1] virt-aa-helper: Add support for smartcard host-certificates
  • From: Christian Ehrhardt
• Re: [libvirt PATCH 2/5] qemu: check if 'floor' is supported for given interface and network
  • From: Michal Privoznik
• Re: [libvirt PATCH 3/5] qemu: call networkPlugBandwidth() for all types of network
  • From: Michal Privoznik
• Re: [libvirt PATCH 4/5] docs: QoS parameter 'floor' is supported for 'open' networks too
  • From: Michal Privoznik
• Re: [libvirt PATCH 1/5] qemu: fail on attempt to set 'floor' if interface type is not 'network'
  • From: Michal Privoznik
• Re: [libvirt PATCH 5/5] qemu: reuse convenience variable introduced in a00b97f27672b3
  • From: Michal Privoznik
• Re: [libvirt PATCH 0/5] qemu: add stricter checks of permissibility of the QoS parameter 'floor'
  • From: Michal Privoznik
• Re: Questions about using qemuProcess API within a libvirt test
  • From: Michal Privoznik
• Re: Questions about using qemuProcess API within a libvirt test
  • From: Laine Stump
• Re: [PATCH v1 01/14] vircgroup: add virCgroupSetupBlkioTune()
  • From: Cole Robinson
• Re: [PATCH v1 01/14] vircgroup: add virCgroupSetupBlkioTune()
  • From: Daniel Henrique Barboza
• Re: [libvirt PATCH] docs: Improve documentation for <serial> and <console>
  • From: Ján Tomko
• [libvirt PATCH] docs: Improve documentation for <serial> and <console>
  • From: Andrea Bolognani
• Re: [PATCH v1 01/14] vircgroup: add virCgroupSetupBlkioTune()
  • From: Cole Robinson
• Re: [libvirt PATCH 0/6] Introduce Local Migration Support in Libvirt
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 5/6] Make PATHs unique for a VM object instance
  • From: Daniel P. Berrangé
• Re: [PATCH 4/6] admin: support server cert update mode
  • From: Daniel P. Berrangé
• Re: [PATCH 2/6] virnetserver: Introduce virNetServerUpdateTlsFiles
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 7/7] testutils: remove now unused virTestCaptureProgramOutput
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 6/7] virshtest: use virCommand instead of custom impl
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 5/7] virshtest: refactor testCompareOutputLit
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 4/7] testutils: remove unnecessary labels
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 3/7] testutils: use g_autoptr
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 2/7] testutils: use g_autofree
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 0/7] virshtest: remove virTestCaptureProgramOutput
  • From: Daniel P. Berrangé
• Re: [libvirt PATCH 1/7] testutils: check return value of g_setenv
  • From: Daniel P. Berrangé
• Re: [PATCH v1 01/14] vircgroup: add virCgroupSetupBlkioTune()
  • From: Daniel Henrique Barboza
• Re: [libvirt PATCH 5/6] Make PATHs unique for a VM object instance
  • From: Martin Kletzander
• Re: [libvirt PATCH 0/9] syntax-check: fix sc-prohibit-cross-inclusion
  • From: Michal Privoznik
• Re: [PATCH v1 01/14] vircgroup: add virCgroupSetupBlkioTune()
  • From: Ján Tomko
• [libvirt PATCH 9/9] syntax-check: remove some exception mechanisms
  • From: Ján Tomko
• [libvirt PATCH 7/9] syntax-check: exclude: remove virstring
  • From: Ján Tomko
• [libvirt PATCH 6/9] syntax-check: exclude: remove deleted files
  • From: Ján Tomko
• [libvirt PATCH 4/9] syntax-check: drop CVS keyword expansion check
  • From: Ján Tomko
• [libvirt PATCH 1/9] syntax-check: do not enforce ChangeLog syntax
  • From: Ján Tomko
• [libvirt PATCH 8/9] syntax-check: remove README
  • From: Ján Tomko
• [libvirt PATCH 5/9] syntax-check: drop update-NEWS-hash
  • From: Ján Tomko
• [libvirt PATCH 3/9] syntax-check: drop vulnerable Makefile checks
  • From: Ján Tomko
• [libvirt PATCH 0/9] syntax-check: fix sc-prohibit-cross-inclusion
  • From: Ján Tomko
• [libvirt PATCH 2/9] syntax-check: fix sc-prohibit-cross-inclusion
  • From: Ján Tomko
• [PATCH v1 02/14] vircgroup: add virCgroupSetupMemtune()
  • From: Daniel Henrique Barboza
• [PATCH v1 12/14] vircgroup: turn virCgroup{Get/Set}BlkioDevice* static
  • From: Daniel Henrique Barboza
• [PATCH v1 04/14] vircgroup: add virCgroupSetAndRetrieveCpuShares()
  • From: Daniel Henrique Barboza
• [PATCH v1 03/14] vircgroup: add virCgroupSetupCpusetCpus()
  • From: Daniel Henrique Barboza
• [PATCH v1 11/14] vircgroup: add virCgroupGetCpuPeriodQuota()
  • From: Daniel Henrique Barboza
• [PATCH v1 10/14] vircgroup: add virCgroupSetMemoryLimitParameters()
  • From: Daniel Henrique Barboza
• [PATCH v1 14/14] vircgroup: turn more cgroup functions static
  • From: Daniel Henrique Barboza
• [PATCH v1 07/14] domain_conf: add virDomainParseBlkioDeviceStr()
  • From: Daniel Henrique Barboza
• [PATCH v1 13/14] vircgroup: turn SetMemory and SetCpusetCpus functions static
  • From: Daniel Henrique Barboza
• [PATCH v1 09/14] domain_conf: add virDomainParseMergePersistentDefBlkioParams()
  • From: Daniel Henrique Barboza
• [PATCH v1 08/14] vircgroup: add virCgroupSetupDomainBlkioParameters()
  • From: Daniel Henrique Barboza
• [PATCH v1 06/14] domain_conf: add virDomainMergeBlkioDevice()
  • From: Daniel Henrique Barboza
• [PATCH v1 05/14] vircgroup: add virCgroupSetupCpuPeriodQuota()
  • From: Daniel Henrique Barboza
• [PATCH v1 00/14] vircgroup code duplication purge
  • From: Daniel Henrique Barboza
• [PATCH v1 01/14] vircgroup: add virCgroupSetupBlkioTune()
  • From: Daniel Henrique Barboza
• Questions about using qemuProcess API within a libvirt test
  • From: Collin Walling
• Re: glib crash via eventtest.c
  • From: Daniel P. Berrangé
• glib crash via eventtest.c
  • From: Cole Robinson
• [libvirt PATCH 1/2] ci: Make container environment available to scripts
  • From: Andrea Bolognani
• [libvirt PATCH 2/2] travis: Use dedicated images for MinGW builds
  • From: Andrea Bolognani
• [libvirt PATCH 0/2] travis: Use dedicated images for MinGW builds
  • From: Andrea Bolognani
• [jenkins-ci PATCH 6/8] lcitool: Add RPM-specific _dockerfile_build_varmap() variant
  • From: Andrea Bolognani
• [dockerfiles PATCH] refresh: Drop MinGW hacks
  • From: Andrea Bolognani
• [jenkins-ci PATCH 5/8] lcitool: Introduce _dockerfile_build_varmap()
  • From: Andrea Bolognani
• [jenkins-ci PATCH 1/8] lcitool: Introduce cross_arch local variable
  • From: Andrea Bolognani
• [jenkins-ci PATCH 8/8] lcitool: Add more checks to _action_dockerfile()
  • From: Andrea Bolognani
• [jenkins-ci PATCH 3/8] lcitool: Separate computation and formatting
  • From: Andrea Bolognani
• [jenkins-ci PATCH 7/8] lcitool: Support MinGW cross-build Dockerfiles on Fedora
  • From: Andrea Bolognani
• [jenkins-ci PATCH 4/8] lcitool: Introduce _dockerfile_format()
  • From: Andrea Bolognani
• [jenkins-ci PATCH 2/8] lcitool: Change check for pip_pkgs formatting
  • From: Andrea Bolognani
• [jenkins-ci PATCH 0/8] lcitool: Support MinGW cross-build Dockerfiles
  • From: Andrea Bolognani
• [libvirt PATCH 4/5] docs: QoS parameter 'floor' is supported for 'open' networks too
  • From: Pavel Mores
• [libvirt PATCH 3/5] qemu: call networkPlugBandwidth() for all types of network
  • From: Pavel Mores
• [libvirt PATCH 5/5] qemu: reuse convenience variable introduced in a00b97f27672b3
  • From: Pavel Mores
• [libvirt PATCH 1/5] qemu: fail on attempt to set 'floor' if interface type is not 'network'
  • From: Pavel Mores
• [libvirt PATCH 2/5] qemu: check if 'floor' is supported for given interface and network
  • From: Pavel Mores
• [libvirt PATCH 0/5] qemu: add stricter checks of permissibility of the QoS parameter 'floor'
  • From: Pavel Mores
• Re: [libvirt PATCH 0/6] Introduce Local Migration Support in Libvirt
  • From: Jim Fehlig
• Re: [libvirt PATCH v2 5/8] qemu: Format the armvtimer timer on the command line
  • From: Masayoshi Mizuma
• Re: [libvirt PATCH v2 4/8] qemu: Validate configuration for the armvtimer timer
  • From: Masayoshi Mizuma
• Re: [libvirt PATCH v2 3/8] conf: Introduce VIR_DOMAIN_TIMER_NAME_ARMVTIMER
  • From: Masayoshi Mizuma
• Re: [libvirt PATCH v2 2/8] qemu: Add the QEMU_CAPS_CPU_KVM_NO_ADJVTIME capability
  • From: Masayoshi Mizuma
• Re: [libvirt PATCH v2 1/8] qemu: Use switch statement in qemuBuildCpuCommandLine()
  • From: Masayoshi Mizuma
• [rust PATCH 0/3] Implement virStoragePoolListVolumes and virStoragePoolListAllVolumes
  • From: mathias
• [rust PATCH 1/3] Implement virStoragePoolListAllVolumes and virStoragePoolListVolumes for StoragePool
  • From: mathias
• [rust PATCH 2/3] cargo fmt
  • From: mathias
• [rust PATCH 3/3] Newline at end of file
  • From: mathias
• Fwd: FW: [libvirt PATCH 0/6] Introduce Local Migration Support in Libvirt
  • From: Prerna
• Re: [patch v2 1/1] virt-aa-helper: Add support for smartcard host-certificates
  • From: Christian Ehrhardt
• 撤回: [PATCH 6/6] docs: update virt-admin.rst for server-update-tls
  • From: Zhangbo (Oscar)
• 撤回: [PATCH 5/6] virt-admin: Introduce command srv-update-tls
  • From: Zhangbo (Oscar)
• 撤回: [PATCH 4/6] admin: support server cert update mode
  • From: Zhangbo (Oscar)
• 撤回: [PATCH 3/6] admin: Introduce virAdmServerUpdateTlsFiles
  • From: Zhangbo (Oscar)
• 撤回: [PATCH 1/6] virnettlscontext: refactoring virNetTLSContextLoadCredentials
  • From: Zhangbo (Oscar)
• 撤回: [PATCH 2/6] virnetserver: Introduce virNetServerUpdateTlsFiles
  • From: Zhangbo (Oscar)
• [PATCH 0/6] update tls files without restarting libvirtd
  • From: Zhang Bo
• [PATCH 1/6] virnettlscontext: refactoring virNetTLSContextLoadCredentials
  • From: Zhang Bo
• [PATCH 2/6] virnetserver: Introduce virNetServerUpdateTlsFiles
  • From: Zhang Bo
• [PATCH 3/6] admin: Introduce virAdmServerUpdateTlsFiles
  • From: Zhang Bo
• [PATCH 4/6] admin: support server cert update mode
  • From: Zhang Bo
• [PATCH 5/6] virt-admin: Introduce command srv-update-tls
  • From: Zhang Bo
• 撤回: [PATCH 0/6] update tls files without restarting libvirtd
  • From: Zhangbo (Oscar)
• [PATCH 6/6] docs: update virt-admin.rst for server-update-tls
  • From: Zhang Bo
• [PATCH 6/6] docs: update virt-admin.rst for server-update-tls
  • From: Zhangbo (Oscar)
• [PATCH 5/6] virt-admin: Introduce command srv-update-tls
  • From: Zhangbo (Oscar)
• [PATCH 4/6] admin: support server cert update mode
  • From: Zhangbo (Oscar)
• [PATCH 3/6] admin: Introduce virAdmServerUpdateTlsFiles
  • From: Zhangbo (Oscar)
• [PATCH 1/6] virnettlscontext: refactoring virNetTLSContextLoadCredentials
  • From: Zhangbo (Oscar)
• [PATCH 2/6] virnetserver: Introduce virNetServerUpdateTlsFiles
  • From: Zhangbo (Oscar)
• [PATCH 0/6] update tls files without restarting libvirtd
  • From: Zhangbo (Oscar)
• Re: [libvirt PATCH] src: use closefrom() for mass closing of FDs
  • From: Ján Tomko
• [libvirt PATCH 5/7] virshtest: refactor testCompareOutputLit
  • From: Ján Tomko
• [libvirt PATCH 4/7] testutils: remove unnecessary labels
  • From: Ján Tomko
• [libvirt PATCH 6/7] virshtest: use virCommand instead of custom impl
  • From: Ján Tomko
• [libvirt PATCH 3/7] testutils: use g_autoptr
  • From: Ján Tomko
• [libvirt PATCH 7/7] testutils: remove now unused virTestCaptureProgramOutput
  • From: Ján Tomko
• [libvirt PATCH 1/7] testutils: check return value of g_setenv
  • From: Ján Tomko
• [libvirt PATCH 2/7] testutils: use g_autofree
  • From: Ján Tomko
• [libvirt PATCH 0/7] virshtest: remove virTestCaptureProgramOutput
  • From: Ján Tomko
• Re: [PATCH v3 0/7] ui: rework -show-cursor option
  • From: Ján Tomko
• Re: New release of libvirt-php?
  • From: Neal Gompa
• Re: New release of libvirt-php?
  • From: Neal Gompa
• Re: New release of libvirt-php?
  • From: Michal Prívozník
• Release of libvirt-php-0.5.5
  • From: Michal Prívozník
• Re: [PATCH] net: Remove deprecated [hub_id name] tuple of 'hostfwd_add' / 'hostfwd_remove'
  • From: Dr. David Alan Gilbert
• Re: [libvirt PATCH] docs: add news item about GNULIB removal
  • From: Andrea Bolognani
• [libvirt PATCH] docs: add news item about GNULIB removal
  • From: Daniel P. Berrangé
• [libvirt PATCH] docs: reduce excessive spacing in ToC for RST files
  • From: Daniel P. Berrangé
• [libvirt PATCH] src: use closefrom() for mass closing of FDs
  • From: Daniel P. Berrangé
• Re: [PATCH 1/2] docs: virsh: Modernize docs for qemu-monitor-command
  • From: Eric Blake
• Re: [libvirt PATCH] docs: add a kbase explaining security protections for QEMU passthrough
  • From: Kashyap Chamarthy
• Re: New release of libvirt-php?
  • From: Michal Privoznik
• [libvirt PATCH] tests: avoid referencing stale readdir pointer
  • From: Daniel P. Berrangé
• Re: [PATCH v3 5/7] ui/gtk: implement show-cursor option
  • From: Joshua Watt
• [libvirt PATCH v2 4/8] qemu: Validate configuration for the armvtimer timer
  • From: Andrea Bolognani
• [libvirt PATCH v2 7/8] docs: List the armvtimer timer among all others
  • From: Andrea Bolognani
• [libvirt PATCH v2 6/8] tests: Add test case for the armvtimer timer
  • From: Andrea Bolognani
• [libvirt PATCH v2 8/8] news: Mention the armvtimer timer
  • From: Andrea Bolognani
• [libvirt PATCH v2 3/8] conf: Introduce VIR_DOMAIN_TIMER_NAME_ARMVTIMER
  • From: Andrea Bolognani
• [libvirt PATCH v2 5/8] qemu: Format the armvtimer timer on the command line
  • From: Andrea Bolognani
• [libvirt PATCH v2 2/8] qemu: Add the QEMU_CAPS_CPU_KVM_NO_ADJVTIME capability
  • From: Andrea Bolognani
• [libvirt PATCH v2 0/8] qemu: Add support for the armvtimer timer
  • From: Andrea Bolognani
• [libvirt PATCH v2 1/8] qemu: Use switch statement in qemuBuildCpuCommandLine()
  • From: Andrea Bolognani
• Re: [PATCH v3 1/7] ui: add show-cursor option
  • From: Markus Armbruster
• Re: New release of libvirt-php?
  • From: Neal Gompa
• New release of libvirt-php?
  • From: Neal Gompa
• Re: [libvirt PATCH 2/2] qemu: preserve error on bandwidth rollback
  • From: Daniel Henrique Barboza
• Re: [libvirt PATCH 1/2] qemu: do not revert to NULL bandwidth
  • From: Daniel Henrique Barboza
• Re: [libvirt PATCH 0/3] qemu: Fix default CPU for old s390 machine types
  • From: Christian Ehrhardt
• [libvirt PATCH 2/2] qemu: preserve error on bandwidth rollback
  • From: Ján Tomko
• [libvirt PATCH 1/2] qemu: do not revert to NULL bandwidth
  • From: Ján Tomko
• [libvirt PATCH 0/2] qemu: fix crash on invalid bandwidth request
  • From: Ján Tomko
• Re: [libvirt PATCH] testutils: print a helpful summary of failed tests
  • From: Daniel P. Berrangé
• [PATCH v3 5/7] ui/gtk: implement show-cursor option
  • From: Gerd Hoffmann
• [PATCH v3 3/7] ui/sdl: switch to new show-cursor option
  • From: Gerd Hoffmann
• [PATCH v3 2/7] ui: wire up legacy -show-cursor option
  • From: Gerd Hoffmann
• [PATCH v3 7/7] ui: deprecate legacy -show-cursor option
  • From: Gerd Hoffmann
• [PATCH v3 6/7] ui: drop curor_hide global variable.
  • From: Gerd Hoffmann
• [PATCH v3 1/7] ui: add show-cursor option
  • From: Gerd Hoffmann
• [PATCH v3 4/7] ui/cocoa: switch to new show-cursor option
  • From: Gerd Hoffmann