Creating an image that requires format probing of the backing image is inherently unsafe (we've had several CVEs over the years based on probes leaking information to the guest on a subsequent boot, although these days tools like libvirt are aware of the issue enough to prevent the worst effects). However, if our probing algorithm ever changes, or if other tools like libvirt determine a different probe result than we do, then subsequent use of that backing file under a different format will present corrupted data to the guest. Start a deprecation clock so that future qemu-img can refuse to create unsafe backing chains that would rely on probing. The warnings are intentionally emitted from the block layer rather than qemu-img (thus, all paths into image creation or rewriting perform the check). However, there is one time where probing is safe: if we probe raw, then it is safe to record that implicitly in the image (but we still warn, as it's better to teach the user to supply -F always than to make them guess when it is safe). iotest 114 specifically wants to create an unsafe image for later amendment rather than defaulting to our new default of recording a probed format, so it needs an update. While touching it, expand it to cover all of the various warnings enabled by this patch. Signed-off-by: Eric Blake <eblake@xxxxxxxxxx> --- docs/system/deprecated.rst | 19 +++++++++++++++++++ block.c | 21 ++++++++++++++++++++- qemu-img.c | 2 +- tests/qemu-iotests/114 | 11 +++++++++++ tests/qemu-iotests/114.out | 8 ++++++++ 5 files changed, 59 insertions(+), 2 deletions(-) diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst index 6c1d9034d9e3..a8ffacf54a52 100644 --- a/docs/system/deprecated.rst +++ b/docs/system/deprecated.rst @@ -376,6 +376,25 @@ The above, converted to the current supported format:: Related binaries ---------------- +qemu-img backing file without format (since 5.0.0) +'''''''''''''''''''''''''''''''''''''''''''''''''' + +The use of ``qemu-img create``, ``qemu-img rebase``, ``qemu-img +convert``, or ``qemu-img amend`` to create or modify an image that +depends on a backing file now recommends that an explicit backing +format be provided. This is for safety: if qemu probes a different +format than what you thought, the data presented to the guest will be +corrupt; similarly, presenting a raw image to a guest allows a +potential security exploit if a future probe sees a non-raw image +based on guest writes. To avoid the warning message, or even future +refusal to create an unsafe image, you must pass ``-o backing_fmt=`` +(or the shorthand ``-F`` during create) to specify the intended +backing format. You may use ``qemu-img rebase -u`` to retroactively +add a backing format to an existing image. However, be aware that +there are already potential security risks to blindly using ``qemu-img +info`` to probe the format of an untrusted backing image, when +deciding what format to add into an existing image. + ``qemu-img convert -n -o`` (since 4.2.0) '''''''''''''''''''''''''''''''''''''''' diff --git a/block.c b/block.c index 43452976acdc..ad49d515809c 100644 --- a/block.c +++ b/block.c @@ -6039,6 +6039,20 @@ void bdrv_img_create(const char *filename, const char *fmt, "Could not open backing image to determine size.\n"); goto out; } else { + if (!backing_fmt) { + warn_report("Deprecated use of backing file without explicit " + "backing format (detected format of %s)", + bs->drv->format_name); + if (bs->drv == &bdrv_raw) { + /* + * A probe of raw is always correct, so in this one + * case, we can write that into the image. + */ + backing_fmt = bs->drv->format_name; + qemu_opt_set(opts, BLOCK_OPT_BACKING_FMT, backing_fmt, + NULL); + } + } if (size == -1) { /* Opened BS, have no size */ size = bdrv_getlength(bs); @@ -6052,7 +6066,12 @@ void bdrv_img_create(const char *filename, const char *fmt, } bdrv_unref(bs); } - } /* (backing_file && !(flags & BDRV_O_NO_BACKING)) */ + /* (backing_file && !(flags & BDRV_O_NO_BACKING)) */ + } else if (backing_file && !backing_fmt) { + warn_report("Deprecated use of unopened backing file without " + "explicit backing format, use of this image requires " + "potentially unsafe format probing"); + } if (size == -1) { error_setg(errp, "Image creation needs a size parameter"); diff --git a/qemu-img.c b/qemu-img.c index b9375427404d..48424f8dbcd4 100644 --- a/qemu-img.c +++ b/qemu-img.c @@ -3637,7 +3637,7 @@ static int img_rebase(int argc, char **argv) * doesn't change when we switch the backing file. */ if (out_baseimg && *out_baseimg) { - ret = bdrv_change_backing_file(bs, out_baseimg, out_basefmt, false); + ret = bdrv_change_backing_file(bs, out_baseimg, out_basefmt, true); } else { ret = bdrv_change_backing_file(bs, NULL, NULL, false); } diff --git a/tests/qemu-iotests/114 b/tests/qemu-iotests/114 index 26104fff6c67..5b06eab0ceee 100755 --- a/tests/qemu-iotests/114 +++ b/tests/qemu-iotests/114 @@ -42,9 +42,15 @@ _unsupported_proto vxhs # qcow2.py does not work too well with external data files _unsupported_imgopts data_file +# Intentionally specify backing file without backing format; demonstrate +# the difference in warning messages when backing file could be probed. +# Note that only a raw probe result will affect the resulting image. +truncate --size=64M "$TEST_IMG.orig" +_make_test_img -b "$TEST_IMG.orig" 64M TEST_IMG="$TEST_IMG.base" _make_test_img 64M _make_test_img -b "$TEST_IMG.base" 64M +_make_test_img -u -b "$TEST_IMG.base" 64M # Set an invalid backing file format $PYTHON qcow2.py "$TEST_IMG" add-header-ext 0xE2792ACA "foo" @@ -55,6 +61,11 @@ _img_info $QEMU_IO -c "open $TEST_IMG" -c "read 0 4k" 2>&1 | _filter_qemu_io | _filter_testdir $QEMU_IO -c "open -o backing.driver=$IMGFMT $TEST_IMG" -c "read 0 4k" | _filter_qemu_io +# Rebase the image, to show that omitting backing format triggers a warning, +# but probing now lets us use the backing file. +$QEMU_IMG rebase -u -b "$TEST_IMG.base" "$TEST_IMG" +$QEMU_IO -c "open $TEST_IMG" -c "read 0 4k" 2>&1 | _filter_qemu_io | _filter_testdir + # success, all done echo '*** done' rm -f $seq.full diff --git a/tests/qemu-iotests/114.out b/tests/qemu-iotests/114.out index 67adef37a4f6..59673abcd5e3 100644 --- a/tests/qemu-iotests/114.out +++ b/tests/qemu-iotests/114.out @@ -1,5 +1,10 @@ QA output created by 114 +qemu-img: warning: Deprecated use of backing file without explicit backing format (detected format of raw) +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.orig backing_fmt=raw Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 +qemu-img: warning: Deprecated use of backing file without explicit backing format (detected format of IMGFMT) +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +qemu-img: warning: Deprecated use of unopened backing file without explicit backing format, use of this image requires potentially unsafe format probing Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base image: TEST_DIR/t.IMGFMT file format: IMGFMT @@ -11,4 +16,7 @@ qemu-io: can't open device TEST_DIR/t.qcow2: Could not open backing file: Unknow no file open, try 'help open' read 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +qemu-img: warning: Deprecated use of backing file without explicit backing format, use of this image requires potentially unsafe format probing +read 4096/4096 bytes at offset 0 +4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) *** done -- 2.25.1