Linux Watchdog

• Thread Index

• Re: [PATCH] watchdog: Fix omap watchdogs to enable the magic close bit
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] watchdog: da9063: Add restart handler support
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v5 0/2] ARM: mediatek: Add watchdog driver
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: Fix omap watchdogs to enable the magic close bit
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: rt2880_wdt: minor clean up
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: hpwdt: Fix initialization message in hpwdt.c
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 1/1] WD: add IT8783 ID
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: imx2: Constify struct regmap_config and watchdog_ops
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v7 0/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 2/4] watchdog: max63xx: cleanup
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] watchdog: max63xx: cleanup
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 4/4] watchdog: max63xx: add heartbeat to platform data
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] watchdog: max63xx: cleanup
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] watchdog: MAX63XX_WATCHDOG does not depend on ARM
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] watchdog: max63xx: add GPIO support
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/4] watchdog: MAX63xx cleanup and platform settings
  • From: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] watchdog: da9063: Add restart handler support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH_V2 2/2] watchdog: jz4740: Add DT support
  • From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
• [PATCH_V2 1/2] dt: watchdog: Add DT binding documentation for jz4740 watchdog timer
  • From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
• [PATCH_V2 0/2] watchdog: jz4740: Add DT support
  • From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
• Re: [PATCH 1/2] dt: watchdog: Add DT binding documentation for jz47xx watchdog timer
  • From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
• Re: [PATCH v7 0/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt: watchdog: Add DT binding documentation for jz47xx watchdog timer
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v7 0/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• Re: [PATCH v7 0/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [GIT PULL] watchdog updates for Linux 3.20
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt: watchdog: Add DT binding documentation for jz47xx watchdog timer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt: watchdog: Add DT binding documentation for jz47xx watchdog timer
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/2] dt: watchdog: Add DT binding documentation for jz47xx watchdog timer
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v3 2/2] watchdog: dw_wdt: Try to get a 30 second watchdog by default
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt: watchdog: Add DT binding documentation for jz47xx watchdog timer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt: watchdog: Add DT binding documentation for jz47xx watchdog timer
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/2] watchdog: jz4740: Add DT support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/2] watchdog: jz4740: Add DT support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt: watchdog: Add DT binding documentation for jz47xx watchdog timer
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/2] watchdog: jz4740: Add DT support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/2] watchdog: jz4740: Add DT support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt: watchdog: Add DT binding documentation for jz47xx watchdog timer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/2] dt: watchdog: Add DT binding documentation for jz47xx watchdog timer
  • From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
• [PATCH 2/2] watchdog: jz4740: Add DT support
  • From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
• [PATCH 0/2] watchdog: jz4740: Add DT support
  • From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 2/2] watchdog: dw_wdt: Try to get a 30 second watchdog by default
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] watchdog: w83627hf_wdt: Add support for NCT6791 and NCT6792
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH V3] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH V3] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v3.19-rc5 Fixes
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH V2] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH V2] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH V2] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V2] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH V2] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH V2] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH] watchdog: bcm47xx_wdt.c: add restart handler support
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 0/2] ARM: mediatek: Add watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 0/2] ARM: mediatek: Add watchdog driver
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v2 4/9] ARM: STi: DT: STiH407: Add Device Tree node for the LPC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 4/9] ARM: STi: DT: STiH407: Add Device Tree node for the LPC
  • From: David Paris <david.paris@xxxxxx>
• Re: [PATCH v2 6/9] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 6/9] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 6/9] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 0/9] mfd: watchdog: rtc: New driver for ST's LPC IP
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 2/9] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 4/9] ARM: STi: DT: STiH407: Add Device Tree node for the LPC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 6/9] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 7/9] rtc: bindings: Provide ST bindings for ST's LPC RTC device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 8/9] rtc: st: add new driver for ST's LPC RTC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 9/9] MAINTAINERS: Add Watchdog and RTC files to STI's maintainer entry
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 5/9] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 3/9] ARM: multi_v7_defconfig: Enable support for ST's LPC RTC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 1/9] mfd: dt-bindings: Provide human readable defines for LPC mode choosing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: dw_wdt: Try to get a 30 second watchdog by default
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] watchdog: dw_wdt: Try to get a 30 second watchdog by default
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 2/8] mfd: Add atmel-st driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/8] mfd: Add atmel-st driver
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v3 2/8] mfd: Add atmel-st driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/8] mfd: Add atmel-st driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• RE: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: "Muller, Francois-nicolas" <francois-nicolas.muller@xxxxxxxxx>
• Re: [PATCH v7 0/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• Re: [PATCH v7 0/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 0/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• Re: [PATCH v3 2/8] mfd: Add atmel-st driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/8] mfd: Add atmel-st driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/8] mfd: Add atmel-st driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/8] watchdog: wdt_pci: Fixed missing blank line warning
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] gpio_wdt: Add "always_running" feature to GPIO watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 5/8] ARM: at91: move the restart function to the system timer driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 7/8] clocksource: atmel-st: use syscon/regmap
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/8] ARM: at91: move the restart function to the system timer driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 7/8] clocksource: atmel-st: use syscon/regmap
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v3 5/8] ARM: at91: move the restart function to the system timer driver
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v3 8/8] ARM: at91: remove useless include
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v3 4/8] ARM: at91: time: move the system timer driver to drivers/clocksource
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v3 6/8] clocksource: atmel-st: properly initialize driver
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v2 4/8] watchdog: advantechwdt: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH v2 5/8] watchdog: acquirewdt: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH v2 6/8] watchdog: ar7_wdt: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH v2 8/8] watchdog: eurotechwdt: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH v2 7/8] watchdog: at91sam9_wdt: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH v2 2/8] watchdog: sch311x_wdt: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH v2 3/8] watchdog: alim1535_wdt: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH v2 1/8] watchdog: wdt_pci: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• Re: [PATCH] watchdog: Remove .owner field from cadence driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: Remove .owner field from cadence driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: "Muller, Francois-nicolas" <francois-nicolas.muller@xxxxxxxxx>
• [PATCH] watchdog: Remove .owner field from cadence driver
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: "Muller, Francois-nicolas" <francois-nicolas.muller@xxxxxxxxx>
• RE: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: "Muller, Francois-nicolas" <francois-nicolas.muller@xxxxxxxxx>
• [PATCH v4] gpio_wdt: Add "always_running" feature to GPIO watchdog
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• Re: [v3] gpio_wdt: Add "always_running" feature to GPIO watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v3] gpio_wdt: Add "always_running" feature to GPIO watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: David Paris <david.paris@xxxxxx>
• Re: [4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 0/2] ARM: mediatek: Add watchdog driver
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v5 2/2] ARM: mediatek: dts: Add bindings for watchdog
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v5 1/2] watchdog: Add driver for Mediatek watchdog
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: watchdog: hpwdt: Fix initialization message in hpwdt.c
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [22/28] watchdog: drop owner assignment from platform_drivers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: imx2: Constify struct regmap_config and watchdog_ops
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/2] watchdog: Add driver for Mediatek watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/4] DT: i2c: Add devices handled by the da9063 MFD driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] watchdog: Add driver for Mediatek watchdog
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4 0/2] ARM: mediatek: Add watchdog driver
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH v3 3/8] watchdog: at91rm9200: use the regmap from mfd
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 2/8] mfd: Add atmel-st driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/8] ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/8] watchdog: at91rm9200: use the regmap from mfd
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/8] ARM: at91: time: move the system timer driver to drivers/clocksource
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 6/8] clocksource: atmel-st: properly initialize driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 5/8] ARM: at91: move the restart function to the system timer driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 7/8] clocksource: atmel-st: use syscon/regmap
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 8/8] ARM: at91: remove useless include
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/8] Atmel System Timer cleanups
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/2] watchdog: Add driver for Mediatek watchdog
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v4 2/2] ARM: mediatek: dts: Add bindings for watchdog
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v4 0/2] ARM: mediatek: Add watchdog driver
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v2 3/8] watchdog: at91rm9200: use the regmap from mfd
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: qi_lb60: Register watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] MIPS: jz4740: Move reset code to the watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Use do_kernel_restart() as the default restart handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Use do_kernel_restart() as the default restart handler
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Use do_kernel_restart() as the default restart handler
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Use do_kernel_restart() as the default restart handler
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Use do_kernel_restart() as the default restart handler
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Use do_kernel_restart() as the default restart handler
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH 3/3] MIPS: jz4740: Move reset code to the watchdog driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 3/3] MIPS: jz4740: Move reset code to the watchdog driver
  • From: Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: qi_lb60: Register watchdog device
  • From: Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: qi_lb60: Register watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Use do_kernel_restart() as the default restart handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] MIPS: jz4740: Move reset code to the watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/8] watchdog: at91rm9200: use the regmap from mfd
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Use do_kernel_restart() as the default restart handler
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH v2 3/8] watchdog: at91rm9200: use the regmap from mfd
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] MIPS: qi_lb60: Register watchdog device
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 3/3] MIPS: jz4740: Move reset code to the watchdog driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/3] MIPS: Use do_kernel_restart() as the default restart handler
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 3/8] watchdog: at91rm9200: use the regmap from mfd
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 1/8] ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/8] watchdog: at91rm9200: use the regmap from mfd
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/8] mfd: Add atmel-st driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/8] ARM: at91: time: move the system timer driver to drivers/clocksource
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 6/8] clocksource: atmel-st: properly initialize driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 5/8] ARM: at91: move the restart function to the system timer driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 7/8] clocksource: atmel-st: use syscon/regmap
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 8/8] ARM: at91: remove useless include
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/8] Atmel System Timer cleanups
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 0/8] Atmel System Timer cleanups
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v7 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• [PATCH v7 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• [PATCH v7 0/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• Re: [PATCH] watchdog: Fix omap watchdogs to enable the magic close bit
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 7/8] clocksource: atmel-st: use syscon/regmap
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 4/8] ARM: at91: time: move the system timer driver to drivers/clocksource
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 3/8] watchdog: at91rm9200: use the regmap from mfd
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 2/8] mfd: Add atmel-st driver
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH 3/8] watchdog: at91rm9200: use the regmap from mfd
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/8] ARM: at91: time: move the system timer driver to drivers/clocksource
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/8] ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH 6/8] clocksource: atmel-st: properly initialize driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/8] ARM: at91: move the restart function to the system timer driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/8] mfd: Add atmel-st driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH 8/8] ARM: at91: remove useless include
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH 7/8] clocksource: atmel-st: use syscon/regmap
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/8] Atmel System Timer cleanups
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH] watchdog: imx2: Constify struct regmap_config and watchdog_ops
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• RE: [PATCH v3] watchdog: imx2_wdt: Add power management support.
  • From: "Li.Xiubo@xxxxxxxxxxxxx" <Li.Xiubo@xxxxxxxxxxxxx>
• RE: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: "Muller, Francois-nicolas" <francois-nicolas.muller@xxxxxxxxx>
• RE: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: Darren Hart <dvhart@xxxxxxxxxxxxx>
• Re: [PATCH 22/28] watchdog: drop owner assignment from platform_drivers
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v3] watchdog: imx2_wdt: Add power management support.
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 3/4] ARM: shmobile: koelsch: Add DA9063 PMIC device node for system restart
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: "Muller, Francois-nicolas" <francois-nicolas.muller@xxxxxxxxx>
• [PATCH 00/28] remove .owner for most platform_drivers: the missing bits
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 22/28] watchdog: drop owner assignment from platform_drivers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: shmobile: koelsch: Add DA9063 PMIC device node for system restart
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v3.19 merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 5/8] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/8] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [STLinux Kernel] [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/8] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/8] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [STLinux Kernel] [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/8] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: Add driver for Mediatek watchdog
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: Add driver for Mediatek watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 5/8] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v3 1/2] watchdog: Add driver for Mediatek watchdog
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v3 2/2] ARM: mediatek: dts: Add bindings for watchdog
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v3 0/2] ARM: mediatek: Add watchdog driver
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 0/8] watchdog: rtc: New driver(s) for ST's LPC IP
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/8] mfd: dt-bindings: Provide human readable defines for LPC mode choosing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 4/8] ARM: STi: DT: STiH407: Add Device Tree node for the LPC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/8] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 5/8] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 7/8] rtc: bindings: Provide ST bindings for ST's LPC RTC device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 8/8] rtc: st: add new driver for ST's LPC RTC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 3/8] ARM: multi_v7_defconfig: Enable support for ST's LPC RTC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/8] drivers: watchdog: Fixed missing blank line warning
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: mediatek: dts: Add bindings for watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/8] drivers: watchdog: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH 3/8] drivers: watchdog: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH 4/8] drivers: watchdog: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH 5/8] drivers: watchdog: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH 6/8] drivers: watchdog: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH 8/8] drivers: watchdog: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH 7/8] drivers: watchdog: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH 1/8] drivers: watchdog: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: mediatek: dts: Add bindings for watchdog
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH] watchdog: imx2_wdt: Fix the argument of watchdog_active()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: imx2_wdt: Fix the argument of watchdog_active()
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• RE: [PATCH RESEND v6 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: James Hartley <James.Hartley@xxxxxxxxxx>
• Re: [PATCH RESEND v6 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 5/8] mfd: Add ST's Low Power Controller driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 7/8] rtc: st: add new driver for ST's LPC RTC
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 5/8] mfd: Add ST's Low Power Controller driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 5/8] mfd: Add ST's Low Power Controller driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/8] mfd: Add ST's Low Power Controller driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: David Paris <david.paris@xxxxxx>
• Re: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: David Paris <david.paris@xxxxxx>
• Re: [STLinux Kernel] [PATCH 7/8] rtc: st: add new driver for ST's LPC RTC
  • From: David Paris <david.paris@xxxxxx>
• [PATCH 3/8] mfd: bindings: Provide ST bindings for ST's LPC device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 4/8] mfd: dt-bindings: Provide human readable defines for LPC mode choosing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/8] ARM: multi_v7_defconfig: Enable support for ST's LPC RTC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 8/8] ARM: STi: DT: STiH407: Add Device Tree node for the LPC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 7/8] rtc: st: add new driver for ST's LPC RTC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 5/8] mfd: Add ST's Low Power Controller driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/8] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 0/8] mfd: watchdog: rtc: New driver for ST's LPC IP
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: Add driver for Mediatek watchdog
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: mediatek: dts: Add bindings for watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: Add driver for Mediatek watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: Add driver for Mediatek watchdog
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• [PATCH v2 1/2] watchdog: Add driver for Mediatek watchdog
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v2 2/2] ARM: mediatek: dts: Add bindings for watchdog
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v2 0/2] ARM: mediatek: Add watchdog driver
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] gpio_wdt: Add "always_running" feature to GPIO watchdog
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH] TCO Watchdog warning interrupt driver creation
  • From: Darren Hart <dvhart@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] ARM: shmobile: koelsch: Add DA9063 watchdog restart support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 0/4] ARM: shmobile: koelsch: Add DA9063 watchdog restart support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] ARM: shmobile: koelsch: Add DA9063 watchdog restart support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 1/4] watchdog: da9063: Add restart handler support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH 2/4] DT: i2c: Add devices handled by the da9063 MFD driver
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• RE: [PATCH 1/4] watchdog: da9063: Add restart handler support
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• [PATCH 1/4] watchdog: da9063: Add restart handler support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 3/4] ARM: shmobile: koelsch: Add DA9063 PMIC device node for system restart
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 4/4] ARM: shmobile: Enable DA9063 watchdog in multiplatform defconfig
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/4] DT: i2c: Add devices handled by the da9063 MFD driver
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 0/4] ARM: shmobile: koelsch: Add DA9063 watchdog restart support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 1/1] Watchdog: Fixed the watchdog close/stop logic - only close the watchdog if the magic character was received and the magic close is supported.
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 1/1] Watchdog: Fixed the watchdog close/stop logic - only close the watchdog if the magic character was received and the magic close is supported.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/1] Watchdog: Fixed the watchdog close/stop logic - only close the watchdog if the magic character was received and the magic close is supported.
  • From: Robert Yang <hachyang@xxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v3.18-rc7 Fixes
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH] watchdog: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• [PATCH] Drivers:watchdog: Fixed missing blank line warning
  • From: Athira Lekshmi <andnlnbn18@xxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• Re: [PATCH RESEND v6 0/2] watchdog: Add support for ImgTec PowerDown Controller Watchdog Timer
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• Re: [PATCH v7 08/11] arm/arm64: Unexport restart handlers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 08/11] arm/arm64: Unexport restart handlers
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v7 08/11] arm/arm64: Unexport restart handlers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 08/11] arm/arm64: Unexport restart handlers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v7 08/11] arm/arm64: Unexport restart handlers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 08/11] arm/arm64: Unexport restart handlers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: Add driver for Mediatek mt6589 watchdog
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• [PATCH RESEND v6 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: Naidu Tellapati <naidu.tellapati@xxxxxxxxx>
• [PATCH RESEND v6 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Naidu Tellapati <naidu.tellapati@xxxxxxxxx>
• [PATCH RESEND v6 0/2] watchdog: Add support for ImgTec PowerDown Controller Watchdog Timer
  • From: Naidu Tellapati <naidu.tellapati@xxxxxxxxx>
• [PATCH v6 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: Naidu Tellapati <naidu.tellapati@xxxxxxxxx>
• [PATCH v6 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Naidu Tellapati <naidu.tellapati@xxxxxxxxx>
• [PATCH v6 0/2] watchdog: Add support for ImgTec PowerDown Controller Watchdog Timer
  • From: Naidu Tellapati <naidu.tellapati@xxxxxxxxx>
• Re: [PATCH v3 0/3] Make Armada 375 use the reference clock when possible
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v3 0/3] Make Armada 375 use the reference clock when possible
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v3 2/3] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH RESEND v5 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• Re: [PATCH v3 0/3] Make Armada 375 use the reference clock when possible
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH RESEND v5 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: naidu.tellapati@xxxxxxxxx
• [PATCH RESEND v5 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: naidu.tellapati@xxxxxxxxx
• [PATCH RESEND v5 0/2] watchdog: Add support for ImgTec PowerDown Controller Watchdog Timer
  • From: naidu.tellapati@xxxxxxxxx
• [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• [PATCH v3] gpio_wdt: Add "always_running" feature to GPIO watchdog
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v2] gpio_wdt: Add "always_running" feature to GPIO watchdog
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v2] gpio_wdt: Add "always_running" feature to GPIO watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] gpio_wdt: Add "always_running" feature to GPIO watchdog
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• RE: [PATCH v4 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Naidu Tellapati <Naidu.Tellapati@xxxxxxxxxx>
• Re: [PATCH v4 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH] gpio_wdt: Add "always_running" feature to GPIO watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] gpio_wdt: Add "always_running" feature to GPIO watchdog
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• RE: [PATCH v3 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Naidu Tellapati <Naidu.Tellapati@xxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• Re: [PATCH v3 0/3] Make Armada 375 use the reference clock when possible
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v3 0/3] Make Armada 375 use the reference clock when possible
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• RE: [PATCH v2 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Naidu Tellapati <Naidu.Tellapati@xxxxxxxxxx>
• RE: [PATCH v2 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: Naidu Tellapati <Naidu.Tellapati@xxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: James Hartley <james.hartley@xxxxxxxxxx>
• RE: [PATCH 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Naidu Tellapati <Naidu.Tellapati@xxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• RE: [PATCH 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: Naidu Tellapati <Naidu.Tellapati@xxxxxxxxxx>
• Re: [PATCH 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: James Hogan <james.hogan@xxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
• RE: [PATCH 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Jude Abraham <Jude.Abraham@xxxxxxxxxx>
• RE: [PATCH 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: Jude Abraham <Jude.Abraham@xxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 1/2] watchdog: ImgTec PDC Watchdog Timer Driver
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• Re: [PATCH -next 1/2] seq_puts: Convert to return void and convert uses too.
  • From: Petr Mladek <pmladek@xxxxxxx>
• Re: [PATCH 1/2] watchdog: Add driver for Mediatek mt6589 watchdog
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH -next 1/2] seq_puts: Convert to return void and convert uses too.
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH -next 1/2] seq_puts: Convert to return void and convert uses too.
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH -next 0/2] seq: Convert seq_puts and seq_putc to return void
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: at91rm9200 remove mach/ header dependency
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH v2] watchdog: at91rm9200 remove mach/ header dependency
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: at91: rm9200 add system timer resources to watchdog
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/2] ARM: at91: rm9200 add system timer resources to watchdog
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/3] clocksource: armada-370-xp: Use the reference clock on A375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/3] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/3] clocksource: armada-370-xp: Add missing clock enable
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/3] Make Armada 375 use the reference clock when possible
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] ARM: mvebu: Enable the reference clock for timer and watchdog on Armada 375 SoC
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] clocksource: armada-370-xp: Add missing clock enable
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: at91: rm9200 add system timer resources to watchdog
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/2] watchdog: at91rm9200 remove mach/ header dependency
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: at91: rm9200 add system timer resources to watchdog
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: at91rm9200 remove mach/ header dependency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/2] ARM: at91: rm9200 add system timer resources to watchdog
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/2] ARM: at91: rm9200 add system timer resources to watchdog
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] watchdog: at91rm9200 remove mach/ header dependency
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] Make Armada 375 use the reference clock when possible
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] ARM: mvebu: Enable the reference clock for timer and watchdog on Armada 375 SoC
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: at91rm9200: allow building when using device tree
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: at91rm9200: allow building when using device tree
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] watchdog: at91rm9200: allow building when using device tree
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: at91rm9200: allow building when using device tree
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] watchdog: at91rm9200: allow building when using device tree
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH] watchdog: at91rm9200: allow building when using device tree
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7
  • From: Abhilash Kesavan <kesavan.abhilash@xxxxxxxxx>
• [PATCH 0/2] ARM: mediatek: Add watchdog driver
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH 1/2] watchdog: Add driver for Mediatek mt6589 watchdog
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH 2/2] ARM: mediatek: dts: Add bindings for watchdog
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v2 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] clocksource: armada-370-xp: Add missing clock enable
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] ARM: mvebu: Enable the reference clock for timer and watchdog on Armada 375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] Make Armada 375 use the reference clock when possible
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/4] ARM: STi: DT: STiH407: Add Device Tree node for LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/4] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v4 0/4] watchdog: Introduce new driver to support ST's Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
  • From: Timo Kokkonen <timo.kokkonen@xxxxxxxxxx>
• Re: [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: Enable the reference clock for timer and watchdog on Armada 375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] clocksource: armada-370-xp: Add missing clock enable
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 4/4] ARM: dts: Enable the reference clock for timer and watchdog on Armada 375 SoC
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] clocksource: armada-370-xp: Add missing clock enable
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: Enable the reference clock for timer and watchdog on Armada 375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] clocksource: armada-370-xp: Add missing clock enable
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/4] Make Armada 375 use the reference clock when possible
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH] watchdog: hpwdt: Fix initialization message in hpwdt.c
  • From: Masanari Iida <standby24x7@xxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v3.18 Merge window
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v3.18 Merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7
  • From: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
• Re: [PATCH 1/1] WD: add IT8783 ID
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/1] WD: add IT8783 ID
  • From: Paolo Teti <paolo.teti@xxxxxxxxx>
• Re: [PATCH] watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7
  • From: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
• Re: [PATCH] watchdog: rt2880_wdt: minor clean up
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V3] watchdog: add MT7621 watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: rt2880_wdt: minor clean up
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V3] watchdog: add MT7621 watchdog support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH V2] watchdog: add MT7621 watchdog support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH v3] watchdog: imx2_wdt: Add power management support.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V2] watchdog: add MT7621 watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V2] watchdog: add MT7621 watchdog support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH V2] watchdog: add MT7621 watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V2] watchdog: add MT7621 watchdog support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH V2] watchdog: add MT7621 watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V2] watchdog: add MT7621 watchdog support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2] watchdog: add MT7621 watchdog support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2] watchdog: add MT7621 watchdog support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH v3] watchdog: imx2_wdt: Add power management support.
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: Fix omap watchdogs to enable the magic close bit
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] clocksource: tegra: Register watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] clocksource: tegra: Register watchdog device
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] watchdog: Fix omap watchdogs to enable the magic close bit
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] watchdog: Fix omap watchdogs to enable the magic close bit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: Fix omap watchdogs to enable the magic close bit
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] clocksource: tegra: Register watchdog device
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] clocksource: tegra: Register watchdog device
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 2/2] clocksource: tegra: Register watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] clocksource: tegra: Register watchdog device
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 1/2] clocksource: tegra: Refactor and cleanup
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] watchdog: add MT7621 watchdog support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH] watchdog: add MT7621 watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: add MT7621 watchdog support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH] ARM: meson: watchdog: remove magic value for reboot
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] ARM: meson: watchdog: remove magic value for reboot
  • From: Carlo Caione <carlo@xxxxxxxxxx>
• Re: [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: ARM: meson: add watchdog driver
  • From: Carlo Caione <carlo@xxxxxxxxxx>
• re: ARM: meson: add watchdog driver
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/4] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/4] ARM: STi: DT: STiH407: Add Device Tree node for LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v3 0/4] watchdog: Introduce new driver to support ST's Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 0/4] watchdog: Introduce new driver to support ST's Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/4] ARM: STi: DT: STiH407: Add Device Tree node for LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/4] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEM
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEM
  • From: Chen Gang <gang.chen.5i5j@xxxxxxxxx>
• Re: [PATCH] drivers/watchdog/Kconfig: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEM
  • From: Chen Gang <gang.chen.5i5j@xxxxxxxxx>
• Re: [PATCH] drivers/watchdog/Kconfig: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEM
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] drivers/watchdog/Kconfig: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEM
  • From: Chen Gang <gang.chen.5i5j@xxxxxxxxx>
• [PATCH] drivers/watchdog/Kconfig: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEM
  • From: Chen Gang <gang.chen.5i5j@xxxxxxxxx>
• Re: [GIT PULL] watchdog updates for Linux 3.18 (#4)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [GIT PULL] watchdog updates for Linux 3.18 (#4)
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• [GIT PULL] watchdog updates for Linux 3.18 (#4)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 00/11] kernel: Add support for restart handler call chain
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v7 00/11] kernel: Add support for restart handler call chain
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 00/11] kernel: Add support for restart handler call chain
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 00/11] kernel: Add support for restart handler call chain
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 00/11] kernel: Add support for restart handler call chain
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] watchdog: watchdog_dev: WATCHDOG_KEEP_ON feature
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [3/6] stmp3xxx_rtc_wdt: Add suspend/resume PM support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/6] watchdog: watchdog_dev: WATCHDOG_KEEP_ON feature
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• [PATCH 1/6] watchdog: watchdog_dev: WATCHDOG_KEEP_ON feature
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] watchdog: watchdog_dev: WATCHDOG_KEEP_ON feature
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] watchdog: watchdog_dev: WATCHDOG_KEEP_ON feature
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] watchdog: watchdog_dev: WATCHDOG_KEEP_ON feature
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 12/16] watchdog: add Atheros AR2315 watchdog driver
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• Re: [PATCH 12/16] watchdog: add Atheros AR2315 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 12/16] watchdog: add Atheros AR2315 watchdog driver
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• Re: [PATCH v3] watchdog: add driver for Ricoh RN5T618 watchdog
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v3] watchdog: add driver for Ricoh RN5T618 watchdog
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• Re: [PATCH 1/6] watchdog: watchdog_dev: WATCHDOG_KEEP_ON feature
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• RE: [PATCH v7] watchdog: Add DA9063 PMIC watchdog driver.
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• Re: [PATCH v3] watchdog: add driver for Ricoh RN5T618 watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3] watchdog: add driver for Ricoh RN5T618 watchdog
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• Re: [PATCH v4 3/4] ARM: DTS: meson: update DTSI to add watchdog node
  • From: Carlo Caione <carlo@xxxxxxxxxx>
• Re: [PATCH v3] watchdog: add driver for Ricoh RN5T618 watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [PATCH v7] watchdog: Add DA9063 PMIC watchdog driver.
  • From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
• Re: [PATCH v3] watchdog: add driver for Ricoh RN5T618 watchdog
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 3/4] watchdog: add driver for Ricoh RN5T618 watchdog
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• [PATCH v3] watchdog: add driver for Ricoh RN5T618 watchdog
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• Re: [PATCH 12/16] watchdog: add Atheros AR2315 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/4] watchdog: add driver for Ricoh RN5T618 watchdog
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 3/4] watchdog: add driver for Ricoh RN5T618 watchdog
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• [PATCH 12/16] watchdog: add Atheros AR2315 watchdog driver
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• Re: [PATCH v7] watchdog: Add DA9063 PMIC watchdog driver.
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH v7] watchdog: Add DA9063 PMIC watchdog driver.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v7] watchdog: Add DA9063 PMIC watchdog driver.
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [GIT PULL] watchdog updates for Linux 3.18 (take three)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [09/14] watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [GIT PULL] watchdog updates for Linux 3.18
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: sunxi: support parameterized compatible strings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 3/4] ARM: DTS: meson: update DTSI to add watchdog node
  • From: Carlo Caione <carlo@xxxxxxxxxx>
• Re: [PATCH v4 3/4] ARM: DTS: meson: update DTSI to add watchdog node
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: sunxi: support parameterized compatible strings
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v4 3/4] ARM: DTS: meson: update DTSI to add watchdog node
  • From: Carlo Caione <carlo@xxxxxxxxxx>
• Re: [PATCH 1/6] watchdog: watchdog_dev: WATCHDOG_KEEP_ON feature
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 3/3] watchdog: qcom: register a restart notifier
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 2/3] watchdog: qcom: document device tree bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] watchdog: qcom: add support for KPSS WDT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 1/3] watchdog: qcom: add support for KPSS WDT
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• [PATCH v4 2/3] watchdog: qcom: document device tree bindings
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• [PATCH v4 0/3] watchdog: add support for QCOM WDT
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• [PATCH v4 3/3] watchdog: qcom: register a restart notifier
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] watchdog: qcom: register a restart notifier
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] watchdog: qcom: document device tree bindings
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] watchdog: qcom: add support for KPSS WDT
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] watchdog: qcom: document device tree bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] watchdog: qcom: register a restart notifier
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] watchdog: qcom: add support for KPSS WDT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 1/3] watchdog: qcom: add support for KPSS WDT
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] watchdog: add support for QCOM WDT
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] watchdog: qcom: document device tree bindings
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] watchdog: qcom: register a restart notifier
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• [GIT PULL] watchdog updates for Linux 3.18
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series
  • From: Andreas Werner <andreas.werner@xxxxxx>
• Re: [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: qcom: add support for KPSS WDT
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series
  • From: Bryan Wu <cooloney@xxxxxxxxx>
• Re: [PATCH v2 3/3] watchdog: qcom: register a restart notifier
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series
  • From: Bryan Wu <cooloney@xxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: qcom: add support for KPSS WDT
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [GIT PULL] MFD: Immutable branch between HWMON, LEDs and Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 2/4] drivers/watchdog/menf21bmc_wdt: introduce MEN 14F021P00 BMC Watchdog driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 2/4] drivers/watchdog/menf21bmc_wdt: introduce MEN 14F021P00 BMC Watchdog driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, HWMON, LEDs and Watchdog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6] watchdog: Add DA9063 PMIC watchdog driver.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 2/4] drivers/watchdog/menf21bmc_wdt: introduce MEN 14F021P00 BMC Watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 2/4] drivers/watchdog/menf21bmc_wdt: introduce MEN 14F021P00 BMC Watchdog driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 2/3] watchdog: qcom: document device tree bindings
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 2/3] watchdog: qcom: document device tree bindings
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v6] watchdog: Add DA9063 PMIC watchdog driver.
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• RE: [PATCH v2] watchdog: imx2_wdt: Add power management support.
  • From: "Li.Xiubo@xxxxxxxxxxxxx" <Li.Xiubo@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: dw_wdt: add restart handler support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: dw_wdt: add restart handler support
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH v2 3/3] watchdog: qcom: register a restart notifier
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] watchdog: qcom: document device tree bindings
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] watchdog: qcom: add support for KPSS WDT
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] watchdog: add support for QCOM WDT
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: dw_wdt: add restart handler support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: dw_wdt: initialise TOP_INIT in dw_wdt_set_top()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: omap_wdt: Add 'early_disable' module parameter
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: imx2_wdt: Add power management support.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: imx2_wdt: Add power management support.
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• Re: watchdog's pm support preffered implementation
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: omap_wdt: Add 'early_disable' module parameter
  • From: Rostislav Lisovy <lisovy@xxxxxxxxx>
• Re: [PATCH 1/2] watchdog: dw_wdt: restart the counter immediately after enabling WDT
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH v2 0/2] watchdog: dw_wdt: one bug fix and restart handler support
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH v2 1/2] watchdog: dw_wdt: initialise TOP_INIT in dw_wdt_set_top()
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH v2 2/2] watchdog: dw_wdt: add restart handler support
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: dw_wdt: add restart handler support
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• RE: [PATCH] watchdog: imx2_wdt: Add power management support.
  • From: "Li.Xiubo@xxxxxxxxxxxxx" <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCH 6/6] stmp3xxx_rtc_wdt: use watchdog's PM helper
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• [PATCH 1/6] watchdog: watchdog_dev: WATCHDOG_KEEP_ON feature
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• [PATCH 4/6] stmp3xxx_rtc_wdt: WATCHDOG_KEEP_ON enabled
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• [PATCH 2/6] watchdog: boottime protection feature (requires 'keep on')
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• [PATCH 5/6] watchdog: suspend/resume PM helper
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• [PATCH 3/6] stmp3xxx_rtc_wdt: Add suspend/resume PM support
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: imx2_wdt: Add power management support.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: imx2_wdt: Add power management support.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: David Paris <david.paris@xxxxxx>
• [PATCH] watchdog: imx2_wdt: Add power management support.
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
  • From: David Paris <david.paris@xxxxxx>
• Re: [PATCH v2 0/2] watchdog: sunxi: Add A31 watchdog support
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: sunxi: Add A31 watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: sunxi: support parameterized compatible strings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>