Linux USB Users

• Thread Index

• Re: [syzbot] [usb?] INFO: task hung in usb_port_suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: usb: raw-gadget: add bug tracker link
  • From: andrey.konovalov@xxxxxxxxx
• Re: [PATCH 0/4] Add USB Support for QCS8300
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v7 1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [syzbot] [usb?] WARNING in thrustmaster_probe/usb_submit_urb
  • From: syzbot <syzbot+040e8b3db6a96908d470@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] wifi: rtlwifi: rtl delayed work must be canceled before putting usb dev
  • From: Lizhi Xu <lizhi.xu@xxxxxxxxxxxxx>
• Re: [PATCH v3] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 2/6] usbnet: ipheth: fix carrier detection in modes 1 and 4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 1/6] usbnet: ipheth: race between ipheth_close and error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 2/7] usbnet: ipheth: fix carrier detection in modes 1 and 4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 1/7] usbnet: ipheth: race between ipheth_close and error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 2/9] usbnet: ipheth: fix carrier detection in modes 1 and 4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 1/9] usbnet: ipheth: race between ipheth_close and error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 2/9] usbnet: ipheth: fix carrier detection in modes 1 and 4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 1/9] usbnet: ipheth: race between ipheth_close and error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 04/13] usbnet: ipheth: fix carrier detection in modes 1 and 4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 03/13] usbnet: ipheth: race between ipheth_close and error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 07/20] usbnet: ipheth: fix carrier detection in modes 1 and 4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 06/20] usbnet: ipheth: do not stop RX on failing RX callback
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 05/20] usbnet: ipheth: drop RX URBs with no payload
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 04/20] usbnet: ipheth: remove extraneous rx URB length check
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 03/20] usbnet: ipheth: race between ipheth_close and error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: duanchenghao <duanchenghao@xxxxxxxxxx>
• [PATCH v3] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: Duan Chenghao <duanchenghao@xxxxxxxxxx>
• [syzbot] [input?] [usb?] INFO: rcu detected stall in do_syscall_64
  • From: syzbot <syzbot+a3bc6ce74afdd295fe4b@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [westeri-thunderbolt:fixes] BUILD SUCCESS e9e1b20fae7de06ba36dd3f8dba858157bad233d
  • From: kernel test robot <lkp@xxxxxxxxx>
• [syzbot] [usb?] INFO: task hung in usblp_open
  • From: syzbot <syzbot+4f6d84a2e9aa11244d06@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_port_suspend
  • From: syzbot <syzbot+f342ea16c9d06d80b585@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_port_suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB-C DisplayPort display failing to stay active with Intel Barlow Ridge USB4 controller, power-management related issue?
  • From: Aaron Rainbolt <arainbolt@xxxxxxxxxx>
• Re: [drivers/usb/usbip] BUG: corrupted list in vep_queue
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [PATCH next] USB: chaoskey: fix deadlock in release
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: USB-C DisplayPort display failing to stay active with Intel Barlow Ridge USB4 controller, power-management related issue?
  • From: Aaron Rainbolt <arainbolt@xxxxxxxxxx>
• Re: [drivers/usb/usbip] BUG: corrupted list in vep_queue
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] xhci: tegra: fix checked USB2 port number
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [drivers/usb/gadget, drivers/media/v4l2-core] divide error in uvc_queue_setup
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [drivers/usb/gadget, drivers/media/v4l2-core] divide error in uvc_queue_setup
  • From: Chenyuan Yang <chenyuan0y@xxxxxxxxx>
• Re: USB-C DisplayPort display failing to stay active with Intel Barlow Ridge USB4 controller, power-management related issue?
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [drivers/usb/usbip] BUG: corrupted list in vep_queue
  • From: Chenyuan Yang <chenyuan0y@xxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_port_suspend
  • From: syzbot <syzbot+f342ea16c9d06d80b585@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_port_suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_port_suspend
  • From: syzbot <syzbot+f342ea16c9d06d80b585@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_port_suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3] xhci: tegra: fix checked USB2 port number
  • From: Henry Lin <henryl@xxxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_port_suspend
  • From: syzbot <syzbot+f342ea16c9d06d80b585@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_port_suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] usb: typec: ucsi: Add support for the partner USB Modes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] usb: typec: Add attribute file showing the USB Modes of the partner
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] usb: typec: Add attribute file showing the supported USB modes of the port
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] usb: typec: ucsi: Add support for the partner USB Modes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] usb: typec: Add attribute file showing the USB Modes of the partner
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [syzbot] [usb?] INFO: task hung in usb_port_suspend
  • From: syzbot <syzbot+f342ea16c9d06d80b585@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] usb: typec: Add attribute file showing the supported USB modes of the port
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/4] usb: typec: ucsi: Add support for the partner USB Modes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 3/4] usb: typec: ucsi: Supply the USB capabilities to the ports
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 2/4] usb: typec: Add attribute file showing the USB Modes of the partner
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 1/4] usb: typec: Add attribute file showing the supported USB modes of the port
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 0/4] usb: typec: USB Modes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [syzbot] [usb?] WARNING: ODEBUG bug in corrupted (3)
  • From: syzbot <syzbot+90f31ac02b7ae5e8b578@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] thunderbolt: Honor TMU requirements in the domain when setting TMU mode
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v28 00/33] Introduce QC USB SND audio offloading support
  • From: "Christopher Snowhill" <kode54@xxxxxxxxx>
• [PATCH v3] usb: dwc3: core: Fix system suspend on TI AM62 platforms
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH] usb: cdns3: cdns3-gadget: Fix cdns3_ep_config() by setting ep.maxpacket
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [v2] xhci: tegra: fix checked USB2 port number
  • From: Henry Lin <henryl@xxxxxxxxxx>
• Re: [PATCH v6 2/8] platform/chrome: Update EC feature flags
  • From: Łukasz Bartosik <ukaszb@xxxxxxxxxxxx>
• Re: [PATCH] xhci: tegra: fix checked USB2 port number
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: tegra: fix checked USB2 port number
  • From: Henry Lin <henryl@xxxxxxxxxx>
• Re: [PATCH] xhci: tegra: fix checked USB2 port number
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/5] usb: add apis for sideband uasge tracking
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• Re: [PATCH v4 5/5] usb: host: enable sideband transfer during system sleep
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• Re: [PATCH v6 2/8] platform/chrome: Update EC feature flags
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH] xhci: tegra: fix checked USB2 port number
  • From: henryl <henryl@xxxxxxxxxx>
• Re: [PATCH v2] USB: Fix the issue of S4 wakeup queisce phase where task resumption fails due to USB status
  • From: Deng Jie <dengjie03@xxxxxxxxxx>
• Re: [PATCH 1/1] MAINTAINERS: Add an entry for the LJCA drivers
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] MAINTAINERS: Add an entry for the LJCA drivers
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH] usb: cdns3: cdns3-gadget: Fix cdns3_ep_config() by setting ep.maxpacket
  • From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
• Re: [drivers/usb/usbip] BUG: corrupted list in vep_queue
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [drivers/usb/usbip] BUG: corrupted list in vep_queue
  • From: Chenyuan Yang <chenyuan0y@xxxxxxxxx>
• Re: [PATCH v4 3/5] usb: add apis for sideband uasge tracking
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: USB-C DisplayPort display failing to stay active with Intel Barlow Ridge USB4 controller, power-management related issue?
  • From: Aaron Rainbolt <arainbolt@xxxxxxxxxx>
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: duanchenghao <duanchenghao@xxxxxxxxxx>
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: duanchenghao <duanchenghao@xxxxxxxxxx>
• [PATCH v28 28/32] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 29/33] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 00/33] Introduce QC USB SND audio offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 18/32] ASoC: doc: Add documentation for SOC USB
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 24/32] ASoC: qcom: qdsp6: Add headphone jack for offload connection status
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 30/32] ALSA: usb-audio: Add USB offload route kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 20/33] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 21/32] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 27/32] ALSA: usb-audio: qcom: Add USB QMI definitions
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 28/33] ALSA: usb-audio: qcom: Add USB QMI definitions
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 30/33] ALSA: usb-audio: qcom: Don't allow USB offload path if PCM device is in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 31/33] ALSA: usb-audio: Add USB offload route kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 33/33] ASoC: usb: Rediscover USB SND devices on USB port add
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 15/32] ASoC: usb: Add PCM format check API for USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 25/33] ASoC: qcom: qdsp6: Add headphone jack for offload connection status
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 26/32] ALSA: usb-audio: Introduce USB SND platform op callbacks
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 31/32] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 32/33] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 32/32] ASoC: usb: Rediscover USB SND devices on USB port add
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 22/33] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 27/33] ALSA: usb-audio: Introduce USB SND platform op callbacks
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 26/33] ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 17/33] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 23/32] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 29/32] ALSA: usb-audio: qcom: Don't allow USB offload path if PCM device is in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 16/32] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 19/33] ASoC: doc: Add documentation for SOC USB
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 23/33] ASoC: qcom: qdsp6: q6afe: Increase APR timeout
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 19/32] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 22/32] ASoC: qcom: qdsp6: q6afe: Increase APR timeout
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 25/32] ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 11/33] ALSA: usb-audio: Export USB SND APIs for modules
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 24/33] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 18/33] ASoC: usb: Fetch ASoC card and pcm device information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 10/33] ALSA: Add USB audio device jack type
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 20/32] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 14/33] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 14/32] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 04/33] xhci: sideband: add initial api to register a sideband entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 21/33] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 03/32] xhci: sideband: add initial api to register a sideband entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 12/33] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 16/33] ASoC: usb: Add PCM format check API for USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 15/33] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 17/32] ASoC: usb: Fetch ASoC card and pcm device information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 13/33] ALSA: usb-audio: Save UAC sample size information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 10/32] ALSA: usb-audio: Export USB SND APIs for modules
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 02/33] xhci: add helper to stop endpoint and wait for completion
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 01/32] xhci: add helper to stop endpoint and wait for completion
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 08/32] usb: dwc3: Specify maximum number of XHCI interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 07/33] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 13/32] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 09/33] usb: dwc3: Specify maximum number of XHCI interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 06/33] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 09/32] ALSA: Add USB audio device jack type
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 08/33] usb: host: xhci-plat: Set XHCI max interrupters if property is present
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 04/32] usb: xhci: xhci-sideband: Set IMOD for xHCI sideband clients
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 05/32] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 06/32] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 05/33] usb: xhci: xhci-sideband: Set IMOD for xHCI sideband clients
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 11/32] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 03/33] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 12/32] ALSA: usb-audio: Save UAC sample size information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 07/32] usb: host: xhci-plat: Set XHCI max interrupters if property is present
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 02/32] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 01/33] xhci: support setting interrupt moderation IMOD for secondary interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: core: Fix system suspend on TI AM62 platforms
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v4 13/18] dt-bindings: usb-switch: Extend for DisplayPort altmode
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2 0/4] mfd: intel_soc_pmic_bxtwc: Fix IRQ domain usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] mfd: intel_soc_pmic_bxtwc: Fix IRQ domain usage
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 3/5] usb: add apis for sideband uasge tracking
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• Re: [PATCH] usb: Disable USB3 LPM at shutdown
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH] thunderbolt: Honor TMU requirements in the domain when setting TMU mode
  • From: Gil Fine <gil.fine@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: Fix the issue of S4 wakeup queisce phase where task resumption fails due to USB status
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] phy: qcom: qmp: Add qmp configuration for QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH net] net: usb: usbnet: fix race in probe failure
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH] usb: xhci: xhci_setup_port_arrays: early -ENODEV if maxports is 0.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxx>
• [syzbot] [usb-storage?] INFO: task hung in usb_stor_disconnect
  • From: syzbot <syzbot+8b9cb14e5b04325684a9@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] usb: typec: Add attribute file showing the USB Modes of the partner
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v7 3/3] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v7 1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v7 2/3] arm64: dts: imx95: add usb3 related nodes
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• 答复: [PATCH] usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null
  • From: 胡连勤 <hulianqin@xxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v4 3/5] usb: add apis for sideband uasge tracking
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: duanchenghao <duanchenghao@xxxxxxxxxx>
• Re: [PATCH v4 3/5] usb: add apis for sideband uasge tracking
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• Re: USB-C DisplayPort display failing to stay active with Intel Barlow Ridge USB4 controller, power-management related issue?
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/5] xhci: sideband: add api to trace sideband usage
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• Re: [PATCH v4 1/5] usb: dwc3: separate dev_pm_ops for each pm_event
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• USB-C DisplayPort display failing to stay active with Intel Barlow Ridge USB4 controller, power-management related issue?
  • From: Aaron Rainbolt <arainbolt@xxxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH v2] USB: Fix the issue of S4 wakeup queisce phase where task resumption fails due to USB status
  • From: Deng Jie <dengjie03@xxxxxxxxxx>
• Re: [PATCH v2 2/4] usb: typec: Add attribute file showing the USB Modes of the partner
  • From: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS faa34159d08089036b6119c85e279fb36abb8bb5
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add QCS8300 compatible
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: usb: qcom,dwc3: Add QCS8300 to USB DWC3 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS8300
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 4/4] phy: qcom: qmp: Add qmp configuration for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add QCS8300 compatible
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: usb: qcom,dwc3: Add QCS8300 to USB DWC3 bindings
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 0/4] Add USB Support for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [syzbot] INFO: rcu detected stall in readlink_copy
  • From: syzbot <syzbot+fe1af52f6f805e2dd506@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] usb: typec: ucsi: Add support for the partner USB Modes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 3/4] usb: typec: ucsi: Supply the USB capabilities to the ports
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 2/4] usb: typec: Add attribute file showing the USB Modes of the partner
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 1/4] usb: typec: Add attribute file showing the supported USB modes of the port
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 0/4] usb: typec: USB Modes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [RFC PATCH 2/6] HID: logitech-hidpp: Assign max concurrent playbacks
  • From: James Ogletree <jogletre@xxxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 1/6] Input: Add variable to track maximum concurrent playbacks
  • From: James Ogletree <jogletre@xxxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 0/6] Separate notions of max concurrent playbacks and
  • From: James Ogletree <jogletre@xxxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 6/6] Input: uinput - Assign max concurrent playbacks
  • From: James Ogletree <jogletre@xxxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 5/6] Input: da7280 - Assign max concurrent playbacks
  • From: James Ogletree <jogletre@xxxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 4/6] Input: cs40l50 - Assign max concurrent playbacks
  • From: James Ogletree <jogletre@xxxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 3/6] HID: pidff: Assign max concurrent playbacks
  • From: James Ogletree <jogletre@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH next] USB: chaoskey: Fix possible deadlock chaoskey_list_lock
  • From: Edward Adam Davis <eadavis@xxxxxx>
• Re: [PATCH 2/2] usb: chipidea: udc: create bounce buffer for problem sglist entries if possible
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [syzbot] [usb?] possible deadlock in chaoskey_release
  • From: syzbot <syzbot+685e14d04fe35692d3bc@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: dwc3: core: Fix system suspend on TI AM62 platforms
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v4 4/5] xhci: sideband: add api to trace sideband usage
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] usb: host: enable sideband transfer during system sleep
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] usb: dwc3: separate dev_pm_ops for each pm_event
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/5] usb: add apis for sideband uasge tracking
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: Fix system suspend on TI AM62 platforms
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: Fix system suspend on TI AM62 platforms
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v4 3/5] usb: add apis for sideband uasge tracking
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: (subset) [PATCH v6 0/8] usb: typec: Implement UCSI driver for ChromeOS
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v6 8/8] mfd: cros_ec: Don't load charger with UCSI
  • From: Lee Jones <lee@xxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v6 1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [usb?] possible deadlock in chaoskey_open
  • From: Edward Adam Davis <eadavis@xxxxxx>
• Re: [PATCH 15/16] arm64: dts: renesas: rzg3s-smarc: Enable USB support
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v1 2/4] usb: typec: Add attribute file showing the USB Modes of the partner
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: qcom-pmic-typec: fix sink status being overwritten with RP_DEF
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH 09/16] dt-bindings: usb: renesas,usbhs: Document RZ/G3S SoC
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH 05/16] soc: renesas: sysc: Move RZ/G3S SoC detection on SYSC driver
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v4 3/5] usb: add apis for sideband uasge tracking
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• RE: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: "Gopal, Saranya" <saranya.gopal@xxxxxxxxx>
• [PATCH] thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v4 5/5] usb: host: enable sideband transfer during system sleep
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• [PATCH v4 4/5] xhci: sideband: add api to trace sideband usage
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• [PATCH v4 3/5] usb: add apis for sideband uasge tracking
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• [PATCH v4 2/5] usb: xhci-plat: separate dev_pm_ops for each pm_event
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• [PATCH v4 1/5] usb: dwc3: separate dev_pm_ops for each pm_event
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• [PATCH v4 0/5] Support system sleep with offloaded usb transfers
  • From: Guan-Yu Lin <guanyulin@xxxxxxxxxx>
• Re: [PATCH] USB: chaoskey: fail open after removal
  • From: Jeongjun Park <aha310510@xxxxxxxxx>
• [syzbot] [usb?] possible deadlock in chaoskey_release
  • From: syzbot <syzbot+685e14d04fe35692d3bc@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [syzbot] [usb?] possible deadlock in usb_deregister_dev (3)
  • From: syzbot <syzbot+1f8ca5ee82576ec01f12@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [syzbot] [usb?] possible deadlock in chaoskey_open
  • From: syzbot <syzbot+5f1ce62e956b7b19610e@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/7] usb: dwc3: qcom: Flatten dwc3 structure
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: duanchenghao <duanchenghao@xxxxxxxxxx>
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] usb: chipidea: udc: create bounce buffer for problem sglist entries if possible
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: duanchenghao <duanchenghao@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: Fix system suspend on TI AM62 platforms
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: Fix system suspend on TI AM62 platforms
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFG
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFG
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] usb: chipidea: udc: create bounce buffer for problem sglist entries if possible
  • From: Kees Bakker <kees@xxxxxxxxxxxx>
• Re: dwc2: Raspberry Pi 3 B Plus stuck in lx_state DWC2_L2 since Linux 6.12-rc1
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v2 0/7] usb: dwc3: qcom: Flatten dwc3 structure
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: Dell WD19TB Thunderbolt Dock not working with kernel > 6.6.28-1
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v2 1/3] xhci: pci: Aling the naming for Cadence PCI ID 0x0200
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: Fix system suspend on TI AM62 platforms
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH 16/16] arm64: defconfig: Enable RZ/G3S SYSC reset driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 15/16] arm64: dts: renesas: rzg3s-smarc: Enable USB support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 14/16] arm64: dts: renesas: r9a08g045: Add USB support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 13/16] arm64: dts: renesas: Add #reset-cells to system controller node
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 12/16] phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 11/16] dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 09/16] dt-bindings: usb: renesas,usbhs: Document RZ/G3S SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 06/16] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH 03/16] dt-bindings: reset: renesas,r9a08g045-sysc: Add reset IDs for RZ/G3S SYSC reset
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 05/16] soc: renesas: sysc: Move RZ/G3S SoC detection on SYSC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: dwc3: Add binding for USB Gen2 de-emphasis
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: dwc3: Add binding for USB Gen2 de-emphasis
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 1/2] dt-bindings: usb: dwc3: Add binding for USB Gen2 de-emphasis
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: Greg KH <greg@xxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 1/2] dt-bindings: usb: dwc3: Add binding for USB Gen2 de-emphasis
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [Bug 219362] USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [Bug 219362] New: USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [Bug 219362] New: USB SATA does not correctly shutdown the SSD upon poweroff causing data loss
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 1/2] dt-bindings: usb: dwc3: Add binding for USB Gen2 de-emphasis
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: dwc3: Add binding for USB Gen2 de-emphasis
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• Re: [PATCH v1] HID: Fix typo in the comment
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [PATCH v6 3/3] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v6 2/3] arm64: dts: imx95: add usb3 related nodes
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v6 1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH] usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFG
  • From: Prashanth K <quic_prashk@xxxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 39845764a0ca01a89dca4ff5b4e9d896ee410054
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_deregister_dev (2)
  • From: syzbot <syzbot+54d572cc6fd8922d1242@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: typec: ucsi: UCSI2.0 Set Sink Path command support
  • From: Pooja Katiyar <pooja.katiyar@xxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: connector: Add property to set pd timer values
  • From: Amit Sunil Dhamne <amitsd@xxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Dell WD19TB Thunderbolt Dock not working with kernel > 6.6.28-1
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: Dell WD19TB Thunderbolt Dock not working with kernel > 6.6.28-1
  • From: Christian Heusel <christian@xxxxxxxxx>
• Re: Dell WD19TB Thunderbolt Dock not working with kernel > 6.6.28-1
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: Dell WD19TB Thunderbolt Dock not working with kernel > 6.6.28-1
  • From: Fabian Stäber <fabian@xxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_register_dev (2)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: dwc3: Add binding for USB Gen2 de-emphasis
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3] platform/x86/hp: Avoid spurious wakeup on HP ProOne 440
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_register_dev (2)
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH] usb: typec: altmode should keep reference to parent
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxx>
• [PATCH 2/2] usb: dwc3: Program USB Gen2 De-emphasis defined in PIPE4 spec
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH 2/2] usb: dwc3: Program USB Gen2 de-emphasis defined in PIPE4 spec
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: usb: dwc3: Add binding for USB Gen2 De-emphasis
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: usb: dwc3: Add binding for USB Gen2 de-emphasis
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH 0/2] usb: dwc3: Add USB3 Gen2 De-emphasis setting from DT
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• Re: [PATCH] usb: typec: altmode should keep reference to parent
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: Fix system suspend on TI AM62 platforms
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [syzbot] [kernfs?] [input?] [usb?] INFO: rcu detected stall in statfs (3)
  • From: syzbot <syzbot+32474671840968fd1101@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: altmode should keep reference to parent
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in usb_register_dev (2)
  • From: syzbot <syzbot+a194ded97ce38690073f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant"
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH 2/2] USB: yurex: kill needless initialization in yurex_read
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH v2 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH v2 0/2] USB: xhci: add support for PWRON polarity invert (TI TUSB73x0)
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH v2 2/2] USB: xhci: add support for PWRON active high
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH] usb: typec: altmode should keep reference to parent
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: chaoskey: fail open after removal
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v3] platform/x86/hp: Avoid spurious wakeup on HP ProOne 440
  • From: Kai-Heng Feng <kaihengf@xxxxxxxxxx>
• [PATCH] usb: gadget: f_uac2: fix return value for UAC2_ATTRIBUTE_STRING store
  • From: Kevin Groeneveld <kgroeneveld@xxxxxxxxxxxx>
• Re: [PATCH v2] smsc95xx: Add implementation for set_pauseparam for enabling to pause RX path.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH net] smsc95xx: Add implementation for set_pauseparam for enabling to pause RX path.
  • From: Andrew Lunn <andrew@xxxxxxx>
• [syzbot] [mm?] [usb?] INFO: rcu detected stall in kswapd (3)
  • From: syzbot <syzbot+bcc7fa5044343fc35941@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] [usb?] KMSAN: uninit-value in bcmp (3)
  • From: syzbot <syzbot+0399100e525dd9696764@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/4] usb: typec: ucsi: Supply the USB capabilities to the ports
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 1/4] usb: typec: Add attribute file showing the supported USB modes of the port
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 2/4] usb: typec: Add attribute file showing the USB Modes of the partner
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] usb: typec: qcom-pmic-typec: fix sink status being overwritten with RP_DEF
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: typec: Add support for Parade PS8830 Type-C Retimer
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] usb: typec: altmode should keep reference to parent
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] usb: typec: qcom-pmic-typec: fix sink status being overwritten with RP_DEF
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 1/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for USB Type-C device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: (subset) [PATCH 00/35] Reorganize kerneldoc parameter names
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: dwc2: Raspberry Pi 3 B Plus stuck in lx_state DWC2_L2 since Linux 6.12-rc1
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH v2 0/4] mfd: intel_soc_pmic_bxtwc: Fix IRQ domain usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 4/4] mfd: intel_soc_pmic_bxtwc: Fix IRQ domain names duplication
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for USB Type-C device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• 回复: [PATCH v1 2/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device
  • From: 张 宁 <zhangn1985@xxxxxxxxxxx>
• [PATCH] usb: typec: qcom-pmic-typec: fix sink status being overwritten with RP_DEF
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• Re: [PATCH v3] platform/x86/hp: Avoid spurious wakeup on HP ProOne 440
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] usb: musb: Fix hardware lockup on first Rx endpoint request
  • From: Hubert Wiśniewski <hubert.wisniewski.25632@xxxxxxxxx>
• Re: [PATCH] USB: atm: speedtch: do not use assignment in if condition
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] USB: atm: speedtch: do not use assignment in if condition
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] USB: atm: speedtch: do not use assignment in if condition
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [syzbot] [usb?] [fs?] [input?] INFO: rcu detected stall in __fsnotify_parent
  • From: syzbot <syzbot+a9cae4ac3dad4268693f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: atm: speedtch: do not use assignment in if condition
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/4] usb: typec: Add attribute file showing the USB Modes of the partner
  • From: kernel test robot <lkp@xxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS d44238d8254a36249d576c96473269dbe500f5e4
  • From: kernel test robot <lkp@xxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 4a9fe2a8ac53cc06e53b6e6aff2ca25991d378af
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: Fix system suspend on TI AM62 platforms
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] USB: atm: speedtch: do not use assignment in if condition
  • From: Manuel <sakunix@xxxxxxxxx>
• Re: [PATCH] usb: xhci: xhci_setup_port_arrays: early -ENODEV if maxports is 0.
  • From: Michał Pecio <michal.pecio@xxxxxxxxx>
• Re: [PATCH] usb: xhci: xhci_setup_port_arrays: early -ENODEV if maxports is 0.
  • From: Olivier Dautricourt <olivierdautricourt@xxxxxxxxx>
• Re: [PATCH] usb: xhci: xhci_setup_port_arrays: early -ENODEV if maxports is 0.
  • From: Olivier Dautricourt <olivierdautricourt@xxxxxxxxx>
• [PATCH AUTOSEL 5.4 17/21] usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the Crashkernel Scenario
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 13/16] usb: chipidea: udc: enable suspend interrupt after usb reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 24/31] usb: chipidea: udc: enable suspend interrupt after usb reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 16/21] usb: chipidea: udc: enable suspend interrupt after usb reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 21/26] usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the Crashkernel Scenario
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 20/26] usb: chipidea: udc: enable suspend interrupt after usb reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 25/31] usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the Crashkernel Scenario
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 30/42] usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the Crashkernel Scenario
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 29/42] usb: chipidea: udc: enable suspend interrupt after usb reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 43/58] usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the Crashkernel Scenario
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 42/58] usb: chipidea: udc: enable suspend interrupt after usb reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 41/58] usb: typec: tipd: Free IRQ only if it was requested before
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.10 50/70] xhci: dbc: Fix STALL transfer event handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.10 58/70] usb: gadget: uvc: Fix ERR_PTR dereference in uvc_v4l2.c
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.10 49/70] usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the Crashkernel Scenario
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.10 48/70] usb: chipidea: udc: enable suspend interrupt after usb reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.10 47/70] usb: typec: tipd: Free IRQ only if it was requested before
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 64/76] usb: gadget: uvc: Fix ERR_PTR dereference in uvc_v4l2.c
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 56/76] usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 55/76] xhci: dbc: Fix STALL transfer event handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 54/76] usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the Crashkernel Scenario
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 53/76] usb: chipidea: udc: enable suspend interrupt after usb reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 52/76] usb: typec: ucsi: Don't truncate the reads
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 51/76] usb: typec: tipd: Free IRQ only if it was requested before
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] usb: typec: altmode should keep reference to parent
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxx>
• Re: [PATCH] usb: typec: altmode should keep reference to parent
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v1 4/4] usb: typec: ucsi: Add support for the partner USB Modes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v1 3/4] usb: typec: ucsi: Supply the USB capabilities to the ports
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v1 2/4] usb: typec: Add attribute file showing the USB Modes of the partner
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v1 1/4] usb: typec: Add attribute file showing the supported USB modes of the port
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v1 0/3] usb: typec: USB Modes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] usb: typec: Add support for Parade PS8830 Type-C Retimer
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v2 0/2] usb: typec: Add new driver for Parade PS8830 Type-C Retimer
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH] usb: usbtmc: initialize memory written to device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: usbtmc: initialize memory written to device
  • From: Alexander Potapenko <glider@xxxxxxxxxx>
• Re: [PATCH v2] usb: Fix problem with xhci resume from suspend
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: usbtmc: initialize memory written to device
  • From: Ⲡⲟⲓⲙⲏⲛ <bemenboshra2001@xxxxxxxxx>
• Re: [PATCH v2] usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Revert "usb: gadget: composite: fix OS descriptors w_value
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: chaoskey: fail open after removal
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: usbtmc: initialize memory written to device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: usbtmc: initialize memory written to device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] smsc95xx: Add implementation for set_pauseparam for enabling to pause RX path.
  • From: Liel Harel <liel.harel@xxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: usb: add TUSB73x0 PCIe
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH v1 0/2] USB: xhci: add support for PWRON polarity invert (TI TUSB73x0)
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH v1 2/2] USB: xhci: add support for PWRON polarity invert
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH] usb: typec: altmode should keep reference to parent
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxx>
• [PATCH] usb: usbtmc: initialize memory written to device
  • From: Pimyn@xxxxxxxxxxxxxxxxxxxxxx, Girgis@xxxxxxxxxxxxxxxxxxxxxx, bemenboshra2001@xxxxxxxxx
• [PATCH net] smsc95xx: Add implementation for set_pauseparam for enabling to pause RX path.
  • From: Liel Harel <liel.harel@xxxxxxxxx>
• Re: [PATCH] usb: xhci: xhci_setup_port_arrays: early -ENODEV if maxports is 0.
  • From: Michał Pecio <michal.pecio@xxxxxxxxx>
• Re: [PATCH 43/51] thunderbolt: Switch to __pm_runtime_put_autosuspend()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 43/51] thunderbolt: Switch to __pm_runtime_put_autosuspend()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH 45/51] usb: Switch to __pm_runtime_put_autosuspend()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH] smsc95xx: Fix some coding style issues
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: tipd: Fix dereferencing freed memory 'fw in core.c
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: xhci: xhci_setup_port_arrays: early -ENODEV if maxports is 0.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] xhci: pci: Aling the naming for Cadence PCI ID 0x0200
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: atm: speedtch: do not use assignment in if condition
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: atm: speedtch: do not use assignment in if condition
  • From: Manuel Quintero F <sakunix@xxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Michał Pecio <michal.pecio@xxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Harry Wentland <harry.wentland@xxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Michał Pecio <michal.pecio@xxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Harry Wentland <harry.wentland@xxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Harry Wentland <harry.wentland@xxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Harry Wentland <harry.wentland@xxxxxxx>
• Re: [PATCH v1 2/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v1 2/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/4] mfd: intel_soc_pmic_bxtwc: Fix IRQ domain names duplication
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for USB Type-C device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 0/4] mfd: intel_soc_pmic_bxtwc: Fix IRQ domain usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] smsc95xx: Fix some coding style issues
  • From: Liel Harel <liel.harel@xxxxxxxxx>
• [syzbot] [usb?] [fs?] [input?] INFO: rcu detected stall in __fsnotify_parent
  • From: syzbot <syzbot+a9cae4ac3dad4268693f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [syzbot] [net?] [virt?] INFO: rcu detected stall in schedule_tail (6)
  • From: syzbot <syzbot+4d2bdddae2e3866013ef@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] smsc95xx: Fix some coding style issues
  • From: Liel Harel <liel.harel@xxxxxxxxx>
• [PATCH] smsc95xx: Fix some coding style issues
  • From: Liel Harel <liel.harel@xxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v2 3/3] xhci: pci: Fix indentation in the PCI device ID definitions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] xhci: pci: Use standard pattern for device IDs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] xhci: pci: Aling the naming for Cadence PCI ID 0x0200
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 0/3] xhci: pci: Amend definitions of PCI device IDs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: dwc2: Raspberry Pi 3 B Plus stuck in lx_state DWC2_L2 since Linux 6.12-rc1
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH v2 1/1] USB: serial: option: add Telit FN920C04 MBIM compositions
  • From: Daniele Palmas <dnlplm@xxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: renesas,usbhs: Deprecate renesas,enable-gpio
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: renesas,usbhs: Deprecate renesas,enable-gpio
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [REGRESSION] usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
  • From: Harry Wentland <harry.wentland@xxxxxxx>
• Re: [syzbot] [input?] [usb?] KASAN: slab-use-after-free Read in hiddev_disconnect (3)
  • From: Terry Junge <linuxhid@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: renesas,usbhs: Deprecate renesas,enable-gpio
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [syzbot] [fs?] INFO: rcu detected stall in sys_utimensat (3)
  • From: Jan Kara <jack@xxxxxxx>
• [PATCH] USB: chaoskey: fail open after removal
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH] usb: xhci: fix a possible null-pointer dereference in xhci_setup_device()
  • From: Michał Pecio <michal.pecio@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: renesas,usbhs: Deprecate renesas,enable-gpio
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: xhci: fix a possible null-pointer dereference in xhci_setup_device()
  • From: Michał Pecio <michal.pecio@xxxxxxxxx>
• Re: [PATCH 6.6 00/14] Backport thunderbolt fix(es) from v6.9
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: renesas,usbhs: Deprecate renesas,enable-gpio
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: renesas: rcar-gen2: Switch HS-USB to renesas,enable-gpios
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: usb: renesas,usbhs: Deprecate renesas,enable-gpio
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 0/2] usb: renesas_usbhs: Deprecate renesas,enable-gpio
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v1] usb: atm: Correct some typos
  • From: Stanislaw Gruszka <stf_xl@xxxxx>
• Re: [PATCH] r8152: Add MAPT for lg laptops
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] [mm?] INFO: rcu detected stall in x64_sys_call
  • From: syzbot <syzbot+65203730e781d98f23a0@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [syzbot] [fs?] INFO: rcu detected stall in sys_utimensat (3)
  • From: syzbot <syzbot+6dca7953fd4bbdf92f5d@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] r8152: Add MAPT for lg laptops
  • From: mike Seo <mikeseohyungjin@xxxxxxxxx>
• [syzbot] [usb?] INFO: task hung in usblp_disconnect
  • From: syzbot <syzbot+5bb5aaead384a4a22890@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: xhci: fix a possible null-pointer dereference in xhci_setup_device()
  • From: Tuo Li <islituo@xxxxxxxxx>
• [PATCH 6.6 14/14] thunderbolt: Improve DisplayPort tunnel setup process to be more robust
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 13/14] thunderbolt: Configure asymmetric link if needed and bandwidth allows
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 12/14] thunderbolt: Add support for asymmetric link
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 11/14] thunderbolt: Introduce tb_switch_depth()
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 10/14] thunderbolt: Introduce tb_for_each_upstream_port_on_path()
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 09/14] thunderbolt: Introduce tb_port_path_direction_downstream()
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 08/14] thunderbolt: Change bandwidth reservations to comply USB4 v2
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 07/14] thunderbolt: Make is_gen4_link() available to the rest of the driver
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 06/14] thunderbolt: Use weight constants in tb_usb3_consumed_bandwidth()
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 05/14] thunderbolt: Use constants for path weight and priority
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 03/14] thunderbolt: Expose tb_tunnel_xxx() log macros to the rest of the driver
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 04/14] thunderbolt: Create multiple DisplayPort tunnels if there are more DP IN/OUT pairs
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 02/14] thunderbolt: Use tb_tunnel_dbg() where possible to make logging more consistent
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 00/14] Backport thunderbolt fix(es) from v6.9
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [PATCH 6.6 01/14] thunderbolt: Fix debug log when DisplayPort adapter not available for pairing
  • From: Alexandru Gagniuc <alexandru.gagniuc@xxxxxx>
• [syzbot] [usb?] [net?] [input?] INFO: rcu detected stall in unix_dgram_recvmsg (4)
  • From: syzbot <syzbot+0d91e83957155dac524c@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: dwc3: core: Fix system suspend on TI AM62 platforms
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v3] usb: gadget: u_ether: Use __netif_rx() in rx_callback()
  • From: Hubert Wiśniewski <hubert.wisniewski.25632@xxxxxxxxx>
• Re: [PATCH v28 00/32] Introduce QC USB SND audio offloading support
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• Re: [PATCH v28 18/32] ASoC: doc: Add documentation for SOC USB
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] usb: dwc3: gadget: Refine the logic for resizing Tx FIFOs
  • From: AKASH KUMAR <quic_akakum@xxxxxxxxxxx>
• [syzbot] [usb?] [ext4?] [input?] INFO: rcu detected stall in sys_pselect6 (2)
  • From: syzbot <syzbot+310c88228172bcf54bef@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip
  • From: Icenowy Zheng <uwu@xxxxxxxxxx>
• [usb:rndis-removal] BUILD SUCCESS 1c8a324d7f6edf32b24f9a9c23b5409a5c1879fc
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: core: Prevent phy suspend during init
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH 0/3] USB-Serial serdev support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] USB-Serial serdev support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] USB-Serial serdev support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v28 18/32] ASoC: doc: Add documentation for SOC USB
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v5] usb: dwc3: gadget: Refine the logic for resizing Tx FIFOs
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: core: Prevent phy suspend during init
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] xhci: Change pm_runtime_forbid to pm_runtime_disable
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: Fix the issue of S4 wakeup queisce phase where task resumption fails due to USB status
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] r8152: Add mac address pass-thru for lg laptops
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [linux][PATCH v2 02/20] dt-bindings: usb: add PIC64GX compatibility to mpfs-musb driver
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] r8152: Add mac address pass-thru for lg laptops
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Change pm_runtime_forbid to pm_runtime_disable
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 18/35] usb: Reorganize kerneldoc parameter names
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• [PATCH 00/35] Reorganize kerneldoc parameter names
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• RE: [PATCH] usb: typec: ucsi: Do not call ACPI _DSM method for UCSI read operations
  • From: "Gopal, Saranya" <saranya.gopal@xxxxxxxxx>
• Re: [PATCH] usb: typec: ucsi: Do not call ACPI _DSM method for UCSI read operations
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• [linux][PATCH v2 02/20] dt-bindings: usb: add PIC64GX compatibility to mpfs-musb driver
  • From: <pierre-henry.moussay@xxxxxxxxxxxxx>
• RE: [PATCH] usb: typec: ucsi: Do not call ACPI _DSM method for UCSI read operations
  • From: "Gopal, Saranya" <saranya.gopal@xxxxxxxxx>
• Re: [PATCH] xhci: debugfs: Add virt endpoint state to xhci debugfs
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Change pm_runtime_forbid to pm_runtime_disable
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH] r8152: Add mac address pass-thru for lg laptops
  • From: "mike.seo" <mikeseohyungjin@xxxxxxxxx>
• dwc2: Raspberry Pi 3 B Plus stuck in lx_state DWC2_L2 since Linux 6.12-rc1
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH] usb: xhci: xhci_setup_port_arrays: early -ENODEV if maxports is 0.
  • From: Olivier Dautricourt <olivierdautricourt@xxxxxxxxx>
• [PATCH v2] usb: dwc3: Correct some typos in comments
  • From: Shen Lichuan <shenlichuan@xxxxxxxx>
• [PATCH] usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null
  • From: 胡连勤 <hulianqin@xxxxxxxx>
• Re: [PATCH] usb: gadget: Add check devm_kasprintf() returned value
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 2/9] usb: gadget: uvc: only enqueue zero length requests in potential underrun
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v6 6/9] usb: gadget: uvc: set req_length based on payload by nreqs instead of req_size
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v6 7/9] usb: gadget: uvc: set nbuffers to minimum STREAMING_MIN_BUFFERS in uvc_queue_setup
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v6 8/9] usb: gadget: uvc: add trace of enqueued and completed requests
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v6 4/9] usb: gadget: uvc: add g_parm and s_parm for frame interval
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v6 3/9] usb: gadget: uvc: rework to enqueue in pump worker from encoded queue
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v6 5/9] usb: gadget: uvc: set req_size and n_requests based on the frame interval
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v6 0/9] usb: gadget: uvc: effectively fill the udc isoc pipeline with available video buffers and fixes
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v6 9/9] usb: gadget: uvc: dont call usb_composite_setup_continue when not streaming
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v6 1/9] usb: gadget: uvc: wake pump everytime we update the free list
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: dwc3: Correct some typos in comments
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH v1] usb: dwc3: Correct some typos in comments
  • From: Shen Lichuan <shenlichuan@xxxxxxxx>
• Re: [PATCH] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up
  • From: duanchenghao <duanchenghao@xxxxxxxxxx>
• [PATCH] usb: gadget: Add check devm_kasprintf() returned value
  • From: Charles Han <hanchunchao@xxxxxxxxxx>
• [syzbot] [kernfs?] [input?] [usb?] INFO: rcu detected stall in kernfs_fop_read_iter (4)
  • From: syzbot <syzbot+c403e932e9c6662dd4f2@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH RFC 14/14] usb: gadget: f_uac2: support ganged volume/mute controls
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 13/14] usb: gadget: f_uac1: support ganged volume/mute controls
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 12/14] usb: gadget: f_uac2: Generate dynamic descriptors based on alt opts
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 11/14] usb: gadget: f_uac1: Generate dynamic descriptors based on alt opts
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 10/14] usb: gadget: f_uac2: Make string table dynamic with strings from all alt modes
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 09/14] usb: gadget: f_uac1: Make string table dynamic with strings from all alt modes
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 08/14] usb: gadget: f_uac2: Add alt mode settings interface
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 07/14] usb: gadget: f_uac1: Add alt mode settings interface
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 06/14] usb: gadget: f_uac1: Add terminal type attributes
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 05/14] usb: gadget: f_uac1: Add hs_bint to configfs.
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 04/14] usb: gadget: f_uac2: Move max packet size code to a common header
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 03/14] usb: gadget: f_uac1: Add adaptive sync support for capture
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 02/14] usb: gadget: f_uac1: Fix fs/hs/ss descriptors to have correct values
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 01/14] usb: gadget: f_uac: Refactor common configfs attribute defines used in UAC1/2.
  • From: crwulff@xxxxxxxxx
• [PATCH RFC 00/14] usb: gadget: f_uac: Add support for alt mode settings
  • From: crwulff@xxxxxxxxx
• [PATCH v2] usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support
  • From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
• Re: [PATCH] dt-bindings: usb: add missing compatible arraylist
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: add missing compatible arraylist
  • From: Karan Sanghavi <karansanghvi98@xxxxxxxxx>
• Re: [PATCH v5 8/9] usb: gadget: uvc: add trace of enqueued and completed requests
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v5] usb: dwc3: gadget: Refine the logic for resizing Tx FIFOs
  • From: Akash Kumar <quic_akakum@xxxxxxxxxxx>
• [syzbot] [usb?] INFO: task hung in usb_register_dev (2)
  • From: syzbot <syzbot+a194ded97ce38690073f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: dwc3: gadget: Refine the logic for resizing Tx FIFOs
  • From: AKASH KUMAR <quic_akakum@xxxxxxxxxxx>
• [PATCH v3] usb: gadget: uvc: configfs: Add frame-based frame format support
  • From: Akash Kumar <quic_akakum@xxxxxxxxxxx>
• [syzbot] [usb?] KASAN: slab-use-after-free Read in chaoskey_disconnect
  • From: syzbot <syzbot+422188bce66e76020e55@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [syzbot] [input?] [usb?] KASAN: slab-use-after-free Read in hiddev_disconnect (3)
  • From: syzbot <syzbot+b76a30cf04926010df03@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: gadget: u_ether: Use __netif_rx() in rx_callback()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] Add support for JULABO PRESTO to cdc_acm
  • From: Fabio Luongo <f.langufo.l@xxxxxxxxx>
• Re: [PATCH v3] usb: gadget: u_ether: Use __netif_rx() in rx_callback()
  • From: Hubert Wiśniewski <hubert.wisniewski.25632@xxxxxxxxx>
• [PATCH 1/1] USB: serial: option: add Telit FN920C04 MBIM compositions
  • From: Daniele Palmas <dnlplm@xxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: core: Prevent phy suspend during init
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: add Gen2 polarity detection support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: usb: snps,dwc3: Add 'snps,inv-sync-hdr-quirk' quirk
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: connector: Add property to set pd timer values
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: usb: snps,dwc3: Add 'snps,inv-sync-hdr-quirk' quirk
  • From: Michael Wu <michael@xxxxxxxxxxxxxxxxx>
• [PATCH 1/2] usb: dwc3: core: add Gen2 polarity detection support
  • From: Michael Wu <michael@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] usb: chipidea: udc: improve dTD link logic
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• [PATCH v5 7/9] usb: gadget: uvc: set nbuffers to minimum STREAMING_MIN_BUFFERS in uvc_queue_setup
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v5 1/9] usb: gadget: uvc: wake pump everytime we update the free list
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v5 2/9] usb: gadget: uvc: only enqueue zero length requests in potential underrun
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v5 8/9] usb: gadget: uvc: add trace of enqueued and completed requests
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v5 3/9] usb: gadget: uvc: rework to enqueue in pump worker from encoded queue
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v5 4/9] usb: gadget: uvc: add g_parm and s_parm for frame interval
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v5 6/9] usb: gadget: uvc: set req_length based on payload by nreqs instead of req_size
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v5 5/9] usb: gadget: uvc: set req_size and n_requests based on the frame interval
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v5 0/9] usb: gadget: uvc: effectively fill the udc isoc pipeline with available video buffers and fixes
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v5 9/9] usb: gadget: uvc: dont call usb_composite_setup_continue when not streaming
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: dwc3: gadget: Refine the logic for resizing Tx FIFOs
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: core: Prevent phy suspend during init
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [syzbot] [media?] WARNING in iguanair_probe/usb_submit_urb (2)
  • From: syzbot <syzbot+ffba8e636870dac0e0c0@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: gadget: u_ether: Use __netif_rx() in rx_callback()
  • From: Hubert Wiśniewski <hubert.wisniewski.25632@xxxxxxxxx>
• Re: [GIT PULL] USB/Thunderbolt driver changes for 6.12-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] dt-bindings: usb: cypress,cypd4226: Drop Tegra specific GPIO defines
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/8] usb: typec: Add driver for Thunderbolt 3 Alternate Mode
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/1] usb: typec: stusb160x: Make use of i2c_get_match_data()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: typec: ucsi: ccg: Use common code in ccg_read()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: typec: ucsi: ccg: Use common code in ccg_write()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] usb: typec: intel_pmc_mux: Null check before use
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] usb: typec: altmode_match should handle TYPEC_ANY_MODE
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] usb: typec: Add driver for Thunderbolt 3 Alternate Mode
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH linux-next] usb: typec: tcpm: use max() to get higher value
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] usb: typec: ucsi: ccg: Adjustments for common code in two functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/1] usb: typec: stusb160x: Make use of i2c_get_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] usb: typec: ucsi: ccg: Adjustments for common code in two functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: u_serial: fix null-ptr-deref in gs_start_io
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] usb: typec: ucsi: ccg: Adjustments for common code in two functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/2] usb: typec: ucsi: ccg: Adjustments for common code in two functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: u_serial: fix null-ptr-deref in gs_start_io
  • From: Hubert Buczyński <hubert.buczynski94@xxxxxxxxx>
• [GIT PULL] USB/Thunderbolt driver changes for 6.12-rc1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: u_serial: fix null-ptr-deref in gs_start_io
  • From: Prashanth K <quic_prashk@xxxxxxxxxxx>
• Re: [PATCH] usb: gadget: u_serial: fix null-ptr-deref in gs_start_io
  • From: Prashanth K <quic_prashk@xxxxxxxxxxx>
• Re: [PATCH] usb: gadget: eem: Use common error handling code in eem_unwrap()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCHv3] usbnet: fix cyclical race on disconnect with work queue
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v2] usb: gadget: r8a66597-udc: Fix double free in r8a66597_probe
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2] USB: Fix the issue of S4 wakeup queisce phase where task resumption fails due to USB status
  • From: Deng Jie <dengjie03@xxxxxxxxxx>
• Re: [PATCH] usb: gadget: u_serial: fix null-ptr-deref in gs_start_io
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v1] usb: atm: Correct some typos
  • From: Shen Lichuan <shenlichuan@xxxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: imx: Add imx8mp-iota2-lumpy board
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] usb: gadget: u_serial: fix null-ptr-deref in gs_start_io
  • From: hbuczynski <hubert.buczynski94@xxxxxxxxx>
• Re: [PATCH] usb: gadget: eem: Use common error handling code in eem_unwrap()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH] usb: gadget: eem: Use common error handling code in eem_unwrap()
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3 3/3] usb: chipidea: udc: improve error recovery for ISO transfer
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v3 2/3] usb: chipidea: udc: improve dTD link logic
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v3 1/3] usb: chipidea: udc: handle USB Error Interrupt if IOC not set
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH v2 1/3] usb: chipidea: udc: handle USB Error Interrupt if IOC not set
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH] thunderbolt: Use common error handling code in update_property_block()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] thunderbolt: Use common error handling code in update_property_block()
  • From: kernel test robot <lkp@xxxxxxxxx>