Linux USB Users

• Thread Index

• [PATCH 2/2] usb: gadget: f_ecm: Use atomic_t to track in-flight request
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 1/2] usb: gadget: f_ncm: Use atomic_t to track in-flight request
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] usb: dwc2: Drop unlock/lock upon queueing a work item
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH v4 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH 2/2] usb: typec: tcpm: set correct data role for non-DRD
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH 14/15] usb: typec: Add member for the supported USB modes to struct typec_capability
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] usb: dwc3: gadget: Improve END_TRANSFER handling
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 04/15] usb: typec: Make the attributes read-only when writing is not possible
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] usb: dwc3: gadget: Add support for disabling SS instances in park mode
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 1/3] doc: dt: bindings: usb: dwc3: Update entries for disabling SS instances in park mode
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 0/3] arm64: g12-common: parkmode_disable_ss_quirk on DWC3 controller
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 14/15] usb: typec: Add member for the supported USB modes to struct typec_capability
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 04/15] usb: typec: Make the attributes read-only when writing is not possible
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] usb: gadget: f_fs: set req->num_sgs as 0 for non-sg transfer
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH v2 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH] usb: cdns3: Fix: ARM core hang after connect/disconnect operation.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: use proper initializers for property entries
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v4 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v4 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: use proper initializers for property entries
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Fix controller get stuck when kicking extra transfer in wrong case
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: USB_DWC3_OF_SIMPLE
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: BUG: KASAN: use-after-free in xhci_trb_virt_to_dma.part.24+0x1c/0x80
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• RE: [PATCH] usb: cdns3: Fix: ARM core hang after connect/disconnect operation.
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• Re: [PATCH] usb: cdns3: Fix: ARM core hang after connect/disconnect operation.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: cdns3: Fix: ARM core hang after connect/disconnect operation.
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• [PATCH] usb: core: hub: Improved device recognition on remote wakeup
  • From: Keiya Nobuta <nobuta.keiya@xxxxxxxxxxx>
• RE: [PATCH] usb: cdns3: Fix: ARM core hang after connect/disconnect operation.
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• Re: [PATCH V2 7/7] USB: serial: f81232: Add gpiolib to GPIO device
  • From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
• [PATCH] usb: gadget: configfs: Add max_speed setting
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH V2 5/7] USB: serial: f81232: Set F81534A serial port with RS232 mode
  • From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
• [PATCH v4 6/6] arm64: dts: meson: a1: Enable DWC3 controller
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v4 5/6] arm64: dts: meson: a1: Enable USB2 PHY
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v4 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v4 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v4 2/6] dt-bindings: usb: dwc3: Add the Amlogic A1 Family DWC3 Glue Bindings
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v4 0/6] arm64: meson: Add support for USB on Amlogic A1
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH] usb: common: usb-conn-gpio: Register charger
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [PATCH v5 3/5] dt-bindings: phy: tegra: Add Tegra194 support
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• [PATCH] usbip: Fix unsafe unaligned pointer usage
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: add udc driver for max3420
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH v3] dt-bindings: usb: Convert DWC2 bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• KASAN: use-after-free Read in v4l2_release (3)
  • From: syzbot <syzbot+75287f75e2fedd69d680@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/1] usb: gadget: add raw-gadget interface
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: syzbot <syzbot+10e5f68920f13587ab12@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: common: usb-conn-gpio: Register charger
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: common: usb-conn-gpio: Register charger
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: common: usb-conn-gpio: Register charger
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: missing parentheses in USE_NEW_SCHEME
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: add udc driver for max3420
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: remove dummy driver musb_am335x.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• USB_DWC3_OF_SIMPLE
  • From: Jonathan Thibault <jonathan@xxxxxxxxxxx>
• Re: [PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH] usbmon: Report device address assigned to USB device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFT PATCH] xhci: Fix memory leak when caching protocol extended capability PSI tables
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: typec: ucsi: Actually enable all the interface notifications
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFT PATCH] xhci: Fix memory leak when caching protocol extended capability PSI tables
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: typec: ucsi: Actually enable all the interface notifications
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: USB Host drive memory leak at "xhci_add_in_port" function
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 4/4] dt-bindings: usb: Add snps,consolidate-trbs & consolidate-trbs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RFT PATCH] xhci: Fix memory leak when caching protocol extended capability PSI tables
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 7/7] USB: serial: f81232: Add gpiolib to GPIO device
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH V2 5/7] USB: serial: f81232: Set F81534A serial port with RS232 mode
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [BUG]: usb: dwc3: gadget: broken on OMAP5432
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 2/2] usb: typec: ucsi: Actually enable all the interface notifications
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 1/2] usb: typec: ucsi: Fix the notification bit offsets
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 0/2] ucsi driver fixes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 2/2] MAINTAINERS: Use linux-usb mailing list for Thunderbolt and USB4 patches
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 0/2] thunderbolt: Fix and MAINTAINERS update
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 1/2] thunderbolt: Fix xhci check in usb4_switch_setup()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: fix non-kernel-doc comments
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: BUG: KASAN: use-after-free in xhci_trb_virt_to_dma.part.24+0x1c/0x80
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [BUG]: usb: dwc3: gadget: broken on OMAP5432
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• [BUG]: usb: dwc3: gadget: broken on OMAP5432
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] phy: core: Add consumer device link support
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH] phy: core: Add consumer device link support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] usb: typec: fix non-kernel-doc comments
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• RE: [PATCH] usb: dwc3: gadget: Fix controller get stuck when kicking extra transfer in wrong case
  • From: Ran Wang <ran.wang_1@xxxxxxx>
• [PATCH] usb: musb: remove dummy driver musb_am335x.c
  • From: Bin Liu <b-liu@xxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: syzbot <syzbot+10e5f68920f13587ab12@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: host: oxu210hp-hcd: fix gcc warning
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH next 0/2] net: ch9200: code cleanup
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: syzbot <syzbot+10e5f68920f13587ab12@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH][V3] usb: ohci-da8xx: ensure error return on variable error is set
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: syzbot <syzbot+10e5f68920f13587ab12@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Use of address 0 in usbmon
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Use of address 0 in usbmon
  • From: Tomasz Moń <desowin@xxxxxxxxx>
• Re: [RPI 3B+ / TSO / lan78xx ]
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: Use of address 0 in usbmon
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RPI 3B+ / TSO / lan78xx ]
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [RPI 3B+ / TSO / lan78xx ]
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Use of address 0 in usbmon
  • From: Tomasz Moń <desowin@xxxxxxxxx>
• Re: [RPI 3B+ / TSO / lan78xx ]
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: [PATCH v4 20/20] usb: host: ehci-tegra: Remove unused fields from tegra_ehci_hcd
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: BUG: KASAN: use-after-free in xhci_trb_virt_to_dma.part.24+0x1c/0x80
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• [PATCH 0/2] musb fixes for v5.5-rc6
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH 1/2] usb: musb: fix idling for suspend after disconnect interrupt
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH 2/2] usb: musb: Disable pullup at init
  • From: Bin Liu <b-liu@xxxxxx>
• Fwd: [BUG REPORT] usb: dwc3: rmmod blocks (g_multi)
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• WARNING in port100_send_cmd_async/usb_submit_urb (2)
  • From: syzbot <syzbot+e7687d3c762f267e48f7@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RPI 3B+ / TSO / lan78xx ]
  • From: RENARD Pierre-Francois <pfrenard@xxxxxxxxx>
• [PATCH][V3] usb: ohci-da8xx: ensure error return on variable error is set
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH][V2] usb: ohci-da8xx: ensure error return on variable error is set
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: BUG: KASAN: use-after-free in xhci_trb_virt_to_dma.part.24+0x1c/0x80
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH] phy: core: Add consumer device link support
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: use proper initializers for property entries
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] USB: serial: pl2303: PL2303HXN can support baud rate are set directly
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] Proper RTS control when buffers fill
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] USB: serial: cp210x: Enables usb generic functions for throttle/unthrottle to prevent USB data loss.
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH][V2] usb: ohci-da8xx: ensure error return on variable error is set
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [bug report] thunderbolt: Add initial support for USB4
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Fix controller get stuck when kicking extra transfer in wrong case
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• Re: [PATCH v3 0/6] Add Apple MFi fastcharge USB device driver
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH v3 0/6] Add Apple MFi fastcharge USB device driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH next 1/2] net: ch9200: use __func__ in debug message
  • From: Chen Zhou <chenzhou10@xxxxxxxxxx>
• [PATCH next 2/2] net: ch9200: remove unnecessary return
  • From: Chen Zhou <chenzhou10@xxxxxxxxxx>
• [PATCH next 0/2] net: ch9200: code cleanup
  • From: Chen Zhou <chenzhou10@xxxxxxxxxx>
• [PATCH v3] dt-bindings: usb: Convert DWC2 bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: USB Host drive memory leak at "xhci_add_in_port" function
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] Add Apple MFi fastcharge USB device driver
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH][next] usb: typec: ucsi: fix spelling mistake "connetor" -> "connector"
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• [PATCH] usb: dwc3: gadget: Fix controller get stuck when kicking extra transfer in wrong case
  • From: Ran Wang <ran.wang_1@xxxxxxx>
• [bug report] thunderbolt: Add initial support for USB4
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: usb: dwc3: Add the Amlogic A1 Family DWC3 Glue Bindings
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH] usb: common: usb-conn-gpio: Register charger
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: next/master bisection: boot on sun7i-a20-olinuxino-lime2
  • From: Guillaume Tucker <guillaume.tucker@xxxxxxxxxxxxx>
• Re: [PATCH] usbmon: Report device address assigned to USB device
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• next/master bisection: boot on sun7i-a20-olinuxino-lime2
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: max3421-udc: add dt bindings for MAX3420 UDC
  • From: Rob Herring <robh@xxxxxxxxxx>
• next/master bisection: boot on sun4i-a10-olinuxino-lime
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH] USB: Fix: Don't skip endpoint descriptors with maxpacket=0
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: Fix: Don't skip endpoint descriptors with maxpacket=0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Fix: Don't skip endpoint descriptors with maxpacket=0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Fix: Don't skip endpoint descriptors with maxpacket=0
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ohci-da8xx: ensure error return on variable error is set
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Fix: Don't skip endpoint descriptors with maxpacket=0
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] USB: Fix: Don't skip endpoint descriptors with maxpacket=0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• next/master bisection: boot on sun4i-a10-olinuxino-lime
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH v4 20/20] usb: host: ehci-tegra: Remove unused fields from tegra_ehci_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/3] USB: Disable LPM on WD19's Realtek Hub during setting its ports to U0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH][next] usb: typec: ucsi: fix spelling mistake "connetor" -> "connector"
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] usb: ohci-da8xx: ensure error return on variable error is set
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH 04/16] usb: gadget: udc: atmel: constify copied structure
  • From: <Cristian.Birsan@xxxxxxxxxxxxx>
• [PATCH][next] usb: typec: ucsi: fix spelling mistake "connetor" -> "connector"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] usbmon: Report device address assigned to USB device
  • From: Tomasz Moń <desowin@xxxxxxxxx>
• Re: [PATCH v5 3/5] dt-bindings: phy: tegra: Add Tegra194 support
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• Re: [PATCH 3/3] USB: Disable LPM on WD19's Realtek Hub during setting its ports to U0
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v4 00/20] NVIDIA Tegra USB2 drivers clean up
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 03/20] usb: phy: tegra: Clean up ulpi_phy_power_off
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 04/20] usb: phy: tegra: Keep track of power on-off state
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 05/20] usb: phy: tegra: Hook up init/shutdown callbacks
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 06/20] usb: phy: tegra: Perform general clean up of the code
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 08/20] usb: phy: tegra: Use relaxed versions of readl/writel
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 09/20] usb: phy: tegra: Use generic stub for a missing VBUS regulator
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 10/20] usb: ulpi: Add resource-managed variant of otg_ulpi_create()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 12/20] usb: phy: tegra: Use u32 for hardware register variables
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 15/20] usb: phy: tegra: Move utmip_pad_count checking under lock
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 13/20] usb: phy: tegra: Use device-tree notion of reset-GPIO's active-state
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 14/20] usb: phy: tegra: Disable VBUS regulator on tegra_usb_phy_init failure
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 19/20] usb: host: ehci-tegra: Stop managing PHY's power
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 18/20] usb: chipidea: tegra: Add USB_TEGRA_PHY to driver's dependencies
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 17/20] usb: chipidea: tegra: Stop managing PHY's power
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 20/20] usb: host: ehci-tegra: Remove unused fields from tegra_ehci_hcd
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 16/20] usb: phy: tegra: Keep CPU interrupts enabled
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 11/20] usb: phy: tegra: Use devm_otg_ulpi_create()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 07/20] usb: phy: tegra: Clean up included headers
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 01/20] dt-binding: usb: ci-hdrc-usb2: Document NVIDIA Tegra support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 02/20] usb: host: ehci-tegra: Correct teardown order of driver's removal
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 2/2] usb: gadget: add udc driver for max3420
  • From: jassisinghbrar@xxxxxxxxx
• [PATCH v2 1/2] dt-bindings: max3421-udc: add dt bindings for MAX3420 UDC
  • From: jassisinghbrar@xxxxxxxxx
• [PATCH v2 0/2] Max3420 udc driver
  • From: jassisinghbrar@xxxxxxxxx
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Roger Whittaker <Roger.Whittaker@xxxxxxxx>
• Re: [PATCH] usb: missing parentheses in USE_NEW_SCHEME
  • From: atmgnd <atmgnd@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: missing parentheses in USE_NEW_SCHEME
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: configfs: unregister gadget only when udc name exist
  • From: yuan linyu <cugyly@xxxxxxx>
• Re: [PATCH] usb: missing parentheses in USE_NEW_SCHEME
  • From: atmgnd <atmgnd@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: missing parentheses in USE_NEW_SCHEME
  • From: atmgnd <atmgnd@xxxxxxxxxxxxxx>
• Re: [PATCH v3 10/16] usb: phy: tegra: Use device-tree notion of reset-GPIO's active-state
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] USB: Disable LPM on WD19's Realtek Hub during setting its ports to U0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 08/20] usb: exynos: Rename Samsung and Exynos to lowercase
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2] usb: gadget: udc: core: Warn about failed to find udc
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• Re: [PATCH] usb: gadget: udc: core: Warn about failed to find udc
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• Re: [PATCH] usb: missing parentheses in USE_NEW_SCHEME
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: udc: core: Warn about failed to find udc
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: udc: core: Warn about failed to find udc
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• [PATCH] usb: missing parentheses in USE_NEW_SCHEME
  • From: atmgnd <atmgnd@xxxxxxxxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: Fw: usbcore missing parentheses in USE_NEW_SCHEME
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] USB: Disable LPM on WD19's Realtek Hub during setting its ports to U0
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: Fw: usbcore missing parentheses in USE_NEW_SCHEME
  • From: atmgnd <atmgnd@xxxxxxxxxxxxxx>
• Re: Fw: usbcore missing parentheses in USE_NEW_SCHEME
  • From: atmgnd <atmgnd@xxxxxxxxxxxxxx>
• Re: [PATCH v3 01/16] dt-binding: usb: ci-hdrc-usb2: Document NVIDIA Tegra support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: Regression: USB/xhci issues on some systems with newer kernel versions
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [Patch V3 01/18] dt-bindings: phy: tegra-xusb: Add usb-role-switch
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: usb: dwc3: Add the Amlogic A1 Family DWC3 Glue Bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 01/16] dt-binding: usb: ci-hdrc-usb2: Document NVIDIA Tegra support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 10/16] usb: phy: tegra: Use device-tree notion of reset-GPIO's active-state
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v5 3/5] dt-bindings: phy: tegra: Add Tegra194 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 07/19] usb: exynos: Rename Samsung and Exynos to lowercase
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: syzbot <syzbot+10e5f68920f13587ab12@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] USB: Disable LPM on WD19's Realtek Hub during setting its ports to U0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/4] usb: xhci: Synopsys xHC consolidate TRBs
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH] usb: ehci-mv: Fix missing iomem in cast
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 0/6] media: fix USB descriptor issues
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 5/6] media: dib0700: fix rc endpoint lookup
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 4/6] media: xirlink_cit: add missing descriptor sanity checks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 2/6] media: ov519: add missing endpoint sanity checks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 6/6] media: iguanair: fix endpoint sanity check
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 3/6] media: stv06xx: add missing descriptor sanity checks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 1/6] media: flexcop-usb: fix endpoint sanity check
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] USB: Disable LPM on WD19's Realtek Hub during setting its ports to U0
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] USB: Disable LPM on WD19's Realtek Hub during setting its ports to U0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Is Duplicate Sequence Number an Issue?
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: exynos: Remove unneeded "snps,dwc2" from hsotg node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: BUG: KASAN: use-after-free in xhci_trb_virt_to_dma.part.24+0x1c/0x80
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: ERROR: unexpected command completion code 0x11 for DJ-Tech CTRL (resending as plain text ;)
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• RE: [PATCH 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] USB: Disable LPM on WD19's Realtek Hub during setting its ports to U0
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• [PATCH 2/3] xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• [PATCH 1/3] xhci: Ensure link state is U3 after setting USB_SS_PORT_LS_U3
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• [PATCH v5 0/5] add Tegra194 XUSB host and pad controller support
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• [PATCH v5 5/5] arm64: tegra: Enable XUSB host in P2972-0000 board
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• [PATCH v5 4/5] arm64: tegra: Add XUSB and pad controller on Tegra194
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• [PATCH v5 3/5] dt-bindings: phy: tegra: Add Tegra194 support
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• [PATCH v5 2/5] phy: tegra: xusb: Add Tegra194 support
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• [PATCH v5 1/5] phy: tegra: xusb: Protect Tegra186 soc with config
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• Re: [PATCH v3 10/16] usb: phy: tegra: Use device-tree notion of reset-GPIO's active-state
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v3 13/16] usb: phy: tegra: Keep CPU interrupts enabled
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH] usb: hub: move resume delay at the head of all USB access functions
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: Baolin Wang <baolin.wang7@xxxxxxxxx>
• RE: [PATCH 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: Baolin Wang <baolin.wang7@xxxxxxxxx>
• RE: [PATCH 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Roger Whittaker <Roger.Whittaker@xxxxxxxx>
• Re: [PATCH] usb: hub: move resume delay at the head of all USB access functions
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Roger Whittaker <Roger.Whittaker@xxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: ERROR: unexpected command completion code 0x11 for DJ-Tech CTRL (resending as plain text ;)
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: ERROR: unexpected command completion code 0x11 for DJ-Tech CTRL (resending as plain text ;)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  • From: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx>
• Re: Fw: usbcore missing parentheses in USE_NEW_SCHEME
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Changed commit author date of queued commits
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 13/16] usb: phy: tegra: Keep CPU interrupts enabled
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: Changed commit author date of queued commits
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: Changed commit author date of queued commits
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Changed commit author date of queued commits
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: BUG: KASAN: use-after-free in xhci_trb_virt_to_dma.part.24+0x1c/0x80
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [GIT PULL] USB-serial fixes for 5.5-rc5
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: legacy: set max_speed to super-speed
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCHv1 2/2] usb: gadget: add udc driver for max3420
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: ERROR: unexpected command completion code 0x11 for DJ-Tech CTRL (resending as plain text ;)
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [GIT PULL] USB-serial fixes for 5.5-rc5
  • From: Johan Hovold <johan@xxxxxxxxxx>
• RE: [RFC PATCH 1/4] usb: xhci: Synopsys xHC consolidate TRBs
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: exynos: Remove unneeded "snps,dwc2" from hsotg node
  • From: Benjamin GAIGNARD <benjamin.gaignard@xxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: Convert DWC2 bindings to json-schema
  • From: Benjamin GAIGNARD <benjamin.gaignard@xxxxxx>
• Re: [PATCH 1/1] phy: freescale: imx8qm-usb3: add imx8qm USB3 PHY
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH] tools: usb: usbip: Get rid of driver name printout in README
  • From: shuah <shuah@xxxxxxxxxx>
• Re: [PATCH v3 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH v3 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH] usbip: Remove unaligned pointer usage from usbip tools
  • From: shuah <shuah@xxxxxxxxxx>
• Re: [issue] usbip: vhci-hcd: Device unable to get work after reset
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Certain cameras no longer working with uvcvideo on recent (openSUSE) kernels
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 01/10] USB: omap_udc: use resource_size
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• [PATCH 00/10] use resource_size
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• [PATCH RESEND v2 4/6] usb: musb: Rename musb_start_urb() to musb_start_next_urb()
  • From: "Matwey V. Kornilov" <matwey@xxxxxxxxxx>
• [PATCH RESEND v2 6/6] usb: musb: Decrease URB starting latency in musb_advance_schedule()
  • From: "Matwey V. Kornilov" <matwey@xxxxxxxxxx>
• [PATCH RESEND v2 0/6] musb: Improve performance for hub-attached webcams
  • From: "Matwey V. Kornilov" <matwey@xxxxxxxxxx>
• [PATCH RESEND v2 3/6] usb: musb: Introduce musb_qh_free() helper function
  • From: "Matwey V. Kornilov" <matwey@xxxxxxxxxx>
• [PATCH RESEND v2 2/6] usb: musb: Introduce musb_qh_empty() helper function
  • From: "Matwey V. Kornilov" <matwey@xxxxxxxxxx>
• [PATCH RESEND v2 5/6] usb: musb: Introduce musb_start_urb()
  • From: "Matwey V. Kornilov" <matwey@xxxxxxxxxx>
• [PATCH RESEND v2 1/6] usb: musb: Use USB_DIR_IN when calling musb_advance_schedule()
  • From: "Matwey V. Kornilov" <matwey@xxxxxxxxxx>
• Re: Fw: usbcore missing parentheses in USE_NEW_SCHEME
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: slow IO on USB media
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [issue] usbip: vhci-hcd: Device unable to get work after reset
  • From: Zhai Zhaoxuan <kxuanobj@xxxxxxxxx>
• [PATCH 04/16] usb: gadget: udc: atmel: constify copied structure
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• [PATCH 00/16] constify copied structure
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• [PATCH] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] usb: phy-generic: Delete unused platform data
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [usb:usb-testing 36/41] drivers/usb/chipidea/../host/ehci.h:743:3: error: implicit declaration of function 'readl_be'; did you mean 'readsb'?
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [usb:usb-testing 36/41] drivers/usb/host/ohci-at91.c:449:39: sparse: sparse: invalid assignment: &=
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/1] phy: freescale: imx8qm-usb3: add imx8qm USB3 PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] usb: host: Do not compile test deprecated USB_OCTEON_EHCI
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [usb:usb-testing 36/40] drivers/usb/host/ehci.h:767:3: error: implicit declaration of function 'writel_be'; did you mean 'writeb'?
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [usb:usb-testing 36/40] drivers/usb/host/ehci.h:767:3: error: implicit declaration of function 'writel_be'; did you mean 'writeb'?
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/1] phy: freescale: imx8qm-usb3: add imx8qm USB3 PHY
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Fix failure to detect end of transfer
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Fix failure to detect end of transfer
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v3 13/16] usb: phy: tegra: Keep CPU interrupts enabled
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: host: Enable compile testing for some of drivers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: host: Enable compile testing for some of drivers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: host: Enable compile testing for some of drivers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: host: Enable compile testing for some of drivers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Fix failure to detect end of transfer
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] usb: host: Enable compile testing for some of drivers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/2] usb: phy: Enable compile testing for some of drivers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] usb: dwc3: gadget: Fix failure to detect end of transfer
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] USB-PD tcpm: bad warning+size, PPS adapters
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: exynos: Remove unneeded "snps,dwc2" from hsotg node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: Convert DWC2 bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH 3/3] usb: typec: Add driver for Thunderbolt 3 Alternate Mode
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [RFC PATCH 2/3] usb: typec: Add attribute file showing the USB mode of the partner
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [RFC PATCH 1/3] usb: typec: Add attribute file showing the USB mode of the port
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [RFC PATCH 0/3] usb: typec: New attribute files for USB mode
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 15/15] usb: typec: ucsi: Store the supported USB modes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 14/15] usb: typec: Add member for the supported USB modes to struct typec_capability
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 13/15] usb: typec: Provide definitions for the USB modes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 12/15] usb: typec: Give the mux drivers all the details regarding the port state
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 11/15] usb: typec: Add definitions for the latest specification releases
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 09/15] usb: pd: Add definition for DFP and UFP1 VDOs
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 10/15] usb: typec: Add the Product Type VDOs to struct usb_pd_identity
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 08/15] usb: pd: Add definitions for the Enter_USB message
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 07/15] usb: typec: Fix the description of struct typec_capability
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 06/15] usb: typec: Allow power role swapping even without USB PD
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 05/15] usb: typec: Hide the port_type attribute when it's not supported
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 04/15] usb: typec: Make the attributes read-only when writing is not possible
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 03/15] usb: typec: More API for cable handling
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 02/15] usb: typec: Add parameter for the VDO to typec_altmode_enter()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 01/15] usb: typec: Block mode entry if the port has the mode disabled
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 00/15] USB Type-C changes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 2/2] usb: typec: ucsi: add support for separate DP altmode devices
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 1/2] usb: typec: ucsi: Store the notification mask
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 0/2] usb: typec: ucsi driver changes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] phy: freescale: imx8qm-usb3: add imx8qm USB3 PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] USB-PD tcpm: bad warning+size, PPS adapters
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [Patch V3 02/18] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 09/18] usb: gadget: tegra-xudc: Remove usb-role-switch support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 10/18] usb: gadget: tegra-xudc: Add usb-phy support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 13/18] arm64: tegra: update OTG port entries for jetson-tx1
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 18/18] arm64: tegra: Enable xudc node on Jetson TX2
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 17/18] arm64: tegra: Add xudc node for Tegra186
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 16/18] arm64: tegra: Enable xudc on Jetson TX1
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 15/18] arm64: tegra: Add xudc node for Tegra210
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 14/18] arm64: tegra: update OTG port entries for jetson-tx2
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 12/18] usb: gadget: tegra-xudc: support multiple device modes
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 11/18] usb: gadget: tegra-xudc: use phy_set_mode to set/unset device mode
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 08/18] usb: xhci-tegra: Add OTG support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 07/18] phy: tegra: xusb: Add set_mode support for utmi phy on Tegra186
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 06/18] phy: tegra: xusb: Add set_mode support for USB 2 phy on Tegra210
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 05/18] phy: tegra: xusb: Add support to get companion USB 3 port
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 04/18] phy: tegra: xusb: Add usb-phy support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 03/18] phy: tegra: xusb: Add usb-role-switch support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 01/18] dt-bindings: phy: tegra-xusb: Add usb-role-switch
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [Patch V3 00/18] Tegra XUSB OTG support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: Reg: USB network interface is down after the reboot
  • From: RAJESH DASARI <raajeshdasari@xxxxxxxxx>
• Problem with Realtek USB Audio on Gigabyte TRX40 Aorus pro wifi
  • From: Mike Hommey <mh@xxxxxxxxxxxx>
• Re: [Patch V2 03/18] phy: tegra: xusb: Add usb-role-switch support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (2)
  • From: syzbot <syzbot+10e5f68920f13587ab12@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] USB-PD tcpm: bad warning+size, PPS adapters
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: handle single role for usb role class
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v3 15/16] usb: chipidea: tegra: Add USB_TEGRA_PHY to driver's dependencies
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v3 14/16] usb: chipidea: tegra: Stop managing PHY's power
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [Patch V2 03/18] phy: tegra: xusb: Add usb-role-switch support
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: usb-c pd: PD_MAX_PAYLOAD too small
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: usb-c pd: PD_MAX_PAYLOAD too small
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v3 02/16] usb: phy: tegra: Hook up init/shutdown callbacks
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 00/16] NVIDIA Tegra USB2 drivers clean up
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 04/16] usb: phy: tegra: Use relaxed versions of readl/writel
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 03/16] usb: phy: tegra: Perform general clean up of the code
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 07/16] usb: phy: tegra: Use devm_otg_ulpi_create()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 09/16] usb: phy: tegra: Assert reset on ULPI close instead of deasserting it
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 06/16] usb: ulpi: Add resource-managed variant of otg_ulpi_create()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 10/16] usb: phy: tegra: Use device-tree notion of reset-GPIO's active-state
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 08/16] usb: phy: tegra: Use u32 for hardware register variables
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 15/16] usb: chipidea: tegra: Add USB_TEGRA_PHY to driver's dependencies
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 12/16] usb: phy: tegra: Move utmip_pad_count checking under lock
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 16/16] usb: host: ehci-tegra: Remove unused fields from tegra_ehci_hcd
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 13/16] usb: phy: tegra: Keep CPU interrupts enabled
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 14/16] usb: chipidea: tegra: Stop managing PHY's power
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 11/16] usb: phy: tegra: Disable VBUS regulator on tegra_usb_phy_init failure
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 05/16] usb: phy: tegra: Use generic stub for a missing VBUS regulator
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 01/16] dt-binding: usb: ci-hdrc-usb2: Document NVIDIA Tegra support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: usb-c pd: PD_MAX_PAYLOAD too small
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH AUTOSEL 4.9 17/38] net: usb: lan78xx: Fix suspend/resume PHY register access error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 24/38] net: usb: lan78xx: Fix error message format specifier
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 10/25] net: usb: lan78xx: Fix suspend/resume PHY register access error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 15/25] net: usb: lan78xx: Fix error message format specifier
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 27/57] net: usb: lan78xx: Fix suspend/resume PHY register access error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 37/57] net: usb: lan78xx: Fix error message format specifier
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 087/187] net: usb: lan78xx: Fix suspend/resume PHY register access error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 119/187] net: usb: lan78xx: Fix error message format specifier
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 40/84] net: usb: lan78xx: Fix suspend/resume PHY register access error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 56/84] net: usb: lan78xx: Fix error message format specifier
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• usb-c pd: PD_MAX_PAYLOAD too small
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: Documentation for qcom,eud
  • From: "Dwivedi, Avaneesh Kumar (avani)" <akdwived@xxxxxxxxxxxxxx>
• [Bug 205841] Lenovo USB-C dock audio NULL pointer
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH 2/2] usb: typec: tcpm: set correct data role for non-DRD
  • From: Jun Li <jun.li@xxxxxxx>
• [PATCH 1/2] usb: chipidea: handle single role for usb role class
  • From: Jun Li <jun.li@xxxxxxx>
• [Bug 205841] Lenovo USB-C dock audio NULL pointer
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH 1/1] usb: cdns3: should not use the same dev_id for shared interrupt handler
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [Patch V2 04/18] phy: tegra: xusb: Add usb-phy support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: [Patch V2 03/18] phy: tegra: xusb: Add usb-role-switch support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH v3 6/6] arm64: dts: meson: a1: Enable DWC3 controller
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v3 5/6] arm64: dts: meson: a1: Enable USB2 PHY
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v3 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v3 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: usb: dwc3: Add the Amlogic A1 Family DWC3 Glue Bindings
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v3 0/6] arm64: meson: Add support for USB on Amlogic A1
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [Patch V2 03/18] phy: tegra: xusb: Add usb-role-switch support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH 1/1] phy: freescale: imx8qm-usb3: add imx8qm USB3 PHY
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 1/1] usb: cdns3: add NXP imx8qm glue layer
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: chipidea: host: Disable port power only if previously enabled
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] phy: cpcap-usb: Prevent USB line glitches from waking up modem
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv2] phy: cpcap-usb: Fix flakey host idling and enumerating of devices
  • From: Pavel Machek <pavel@xxxxxx>
• Reg: USB network interface is down after the reboot
  • From: RAJESH DASARI <raajeshdasari@xxxxxxxxx>
• Re: [PATCH] usb: hub: move resume delay at the head of all USB access functions
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [Patch V2 05/18] phy: tegra: xusb: Add support to get companion USB 3 port
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• Re: [Patch V2 03/18] phy: tegra: xusb: Add usb-role-switch support
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
  • From: "Sandeep Maheswaram (Temp)" <sanm@xxxxxxxxxxxxxx>
• RE: [PATCH] usb: hub: move resume delay at the head of all USB access functions
  • From: "Pan, Harry" <harry.pan@xxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: "Theodore Y. Ts'o" <tytso@xxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: usb: dwc3: gadget: Fix request complete check
  • From: youling257 <youling257@xxxxxxxxx>
• [PATCH] USB: serial: pl2303: PL2303HXN can support baud rate are set directly
  • From: Charles Yeh <charlesyeh522@xxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: "Theodore Y. Ts'o" <tytso@xxxxxxx>
• Re: [PATCH] usb: hub: move resume delay at the head of all USB access functions
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• Re: ERROR: unexpected command completion code 0x11 for DJ-Tech CTRL (resending as plain text ;)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: hub: move resume delay at the head of all USB access functions
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH 1/1] HID: hiddev: remove a duplicated check
  • From: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
• Re: USB: UAC2: Custom bInterval values
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• RE: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: ERROR: unexpected command completion code 0x11 for DJ-Tech CTRL (resending as plain text ;)
  • From: "Rene D. Obermueller" <cmdrrdo@xxxxxxxxx>
• Re: [PATCHv1 1/2] dt-bindings: max3421-udc: add dt bindings for MAX3420 UDC
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCHv1 2/2] usb: gadget: add udc driver for max3420
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: "Theodore Y. Ts'o" <tytso@xxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: [PATCH v2 2/2] USB: core: Attempt power cycle port when it's in eSS.Disabled state
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: "Theodore Y. Ts'o" <tytso@xxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: "Theodore Y. Ts'o" <tytso@xxxxxxx>
• Re: [PATCH v2 08/10] usb: phy: tegra: Use u32 for hardware register variables
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: ERROR: unexpected command completion code 0x11 for DJ-Tech CTRL (resending as plain text ;)
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc2: fix debugfs FIFO count
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: dwc2: Fix IN FIFO allocation
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• Re: [PATCH] usb: cdns3: gadget: Remove unneeded variable ret
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] usb: gadget: legacy: set max_speed to super-speed
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH] usb: hub: move resume delay at the head of all USB access functions
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH v2 08/10] usb: phy: tegra: Use u32 for hardware register variables
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH 3/3] phy: cpcap-usb: Drop extra write to usb2 register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] phy: cpcap-usb: Improve host vs docked mode detection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] phy: cpcap-usb: Prevent USB line glitches from waking up modem
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2] phy: cpcap-usb: Fix flakey host idling and enumerating of devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 08/10] usb: phy: tegra: Use u32 for hardware register variables
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• [PATCH] ax88172a: fix wrong reading MAC malicious device
  • From: Phong Tran <tranmanphong@xxxxxxxxx>
• KASAN: use-after-free Read in asix_suspend
  • From: syzbot <syzbot+514595412b80dc817633@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] USB: EHCI: ehci-mv: make HSIC work
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] power/supply: Add generic USB charger driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• USB: UAC2: Custom bInterval values
  • From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
• [PATCH v2 0/3] USB: EHCI: ehci-mv: make HSIC work
  • From: Lubomir Rintel <lkundrak@xxxxx>
• [PATCH v2 3/3] USB: EHCI: ehci-mv: drop pxa_ehci_type and some device IDs
  • From: Lubomir Rintel <lkundrak@xxxxx>
• [PATCH v2 1/3] USB: EHCI: ehci-mv: add HSIC support
  • From: Lubomir Rintel <lkundrak@xxxxx>
• [PATCH v2 2/3] USB: EHCI: ehci-mv: make the PHY optional
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [RFC PATCH 13/14] usb: devicetree: dwc3: Add property to disable mult TRB fetch
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Add yaml DWC2 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: fix clock names
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 13/14] usb: devicetree: dwc3: Add property to disable mult TRB fetch
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [GIT PULL] USB fixes for 5.5-rc3
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] usb: handle warm-reset port requests on hub resume
  • From: dann frazier <dann.frazier@xxxxxxxxxxxxx>
• Re: [PATCH] USB: core: fix check for duplicate endpoints
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: No block device created for NVMe SSD attached to Lindy enclosure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: hub: move resume delay at the head of all USB access functions
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.4 07/11] usb: gadget: fix wrong endpoint desc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 07/14] usb: gadget: fix wrong endpoint desc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: ERROR: unexpected command completion code 0x11 for DJ-Tech CTRL (resending as plain text ;)
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.14 11/19] usb: gadget: fix wrong endpoint desc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 24/34] usb: gadget: fix wrong endpoint desc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 39/52] usb: gadget: fix wrong endpoint desc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• ERROR: unexpected command completion code 0x11 for DJ-Tech CTRL (resending as plain text ;)
  • From: "Rene D. Obermueller" <cmdrrdo@xxxxxxxxx>
• [RFC PATCH 4/4] dt-bindings: usb: Add snps,consolidate-trbs & consolidate-trbs
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• [RFC PATCH 3/4] usb: xhci: Set quirk for XHCI_CONSOLIDATE_TRBS
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• [RFC PATCH 2/4] usb: dwc3: Add device property consolidate-trbs
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• [RFC PATCH 1/4] usb: xhci: Synopsys xHC consolidate TRBs
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• [RFC PATCH 0/4] Add logic to consolidate TRBs for Synopsys xHC
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• No block device created for NVMe SSD attached to Lindy enclosure
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH V3 1/1] usb: serial: option: add ZLP support for 0x1bc7/0x9010
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] USB: EHCI: ehci-mv: drop pxa_ehci_type and unused device IDs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] doc: dt: bindings: usb: dwc3: Update entries for disabling SS instances in park mode
  • From: Tim <elatllat@xxxxxxxxx>
• Re: [PATCH] USB: EHCI: ehci-mv: drop pxa_ehci_type and unused device IDs
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [Patch V2 01/18] dt-bindings: phy: tegra-xusb: Add usb-role-switch
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• Re: [PATCH v2 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH] USB: EHCI: ehci-mv: drop pxa_ehci_type and unused device IDs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [Patch V2 00/18] Tegra XUSB OTG support
  • From: JC Kuo <jckuo@xxxxxxxxxx>
• [PATCH] usb: cdns3: gadget: Remove unneeded variable ret
  • From: Xu Wang <vulab@xxxxxxxxxxx>
• [PATCH] USB: EHCI: ehci-mv: add HSIC support
  • From: Lubomir Rintel <lkundrak@xxxxx>
• [PATCH] USB: EHCI: ehci-mv: make the PHY optional
  • From: Lubomir Rintel <lkundrak@xxxxx>
• [PATCH] USB: EHCI: ehci-mv: drop pxa_ehci_type and unused device IDs
  • From: Lubomir Rintel <lkundrak@xxxxx>
• [GIT PULL] USB fixes for 5.5-rc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH] usb: hub: move resume delay at the head of all USB access functions
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• [PATCH v2 00/10] NVIDIA Tegra USB2 drivers clean up
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 05/10] usb: phy: tegra: Use generic stub for a missing VBUS regulator
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 01/10] dt-binding: usb: ci-hdrc-usb2: Document NVIDIA Tegra support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 04/10] usb: phy: tegra: Use relaxed versions of readl/writel
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 08/10] usb: phy: tegra: Use u32 for hardware register variables
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 06/10] usb: ulpi: Add resource-managed variant of otg_ulpi_create()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 10/10] usb: chipidea: tegra: Add USB_TEGRA_PHY module to driver's dependencies
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 09/10] usb: chipidea: tegra: Stop managing PHY's power
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 07/10] usb: phy: tegra: Use devm_otg_ulpi_create()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 03/10] usb: phy: tegra: Perform general clean up of the code
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v2 02/10] usb: phy: tegra: Hook up init/shutdown callbacks
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [RFC PATCH 13/14] usb: devicetree: dwc3: Add property to disable mult TRB fetch
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [RFC PATCH 06/14] usb: devicetree: dwc3: Add max lane and lsm
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [RFC PATCH 13/14] usb: devicetree: dwc3: Add property to disable mult TRB fetch
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 06/14] usb: devicetree: dwc3: Add max lane and lsm
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/3] power/supply: Add generic USB charger driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCHv1 1/2] dt-bindings: max3421-udc: add dt bindings for MAX3420 UDC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] usb: phy: ab8500-usb: Keep PHY turned on in UART mode
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 1/2] usb: dwc2: Fix IN FIFO allocation
  • From: John Keeping <john@xxxxxxxxxxxx>
• [PATCH] tools: usb: usbip: Get rid of driver name printout in README
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH] USB: core: fix check for duplicate endpoints
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v1 3/4] usb: phy: tegra: Perform general clean up of the code
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v1 2/4] usb: phy: tegra: Hook up init/shutdown callbacks
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v1 2/4] usb: phy: tegra: Hook up init/shutdown callbacks
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH] usb: xhci: fix unused function warning
  • From: Chen Zhou <chenzhou10@xxxxxxxxxx>
• Re: [Patch V2 04/18] phy: tegra: xusb: Add usb-phy support
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [Patch V2 03/18] phy: tegra: xusb: Add usb-role-switch support
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [Patch V2 00/18] Tegra XUSB OTG support
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [Patch V2 02/18] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [Patch V2 01/18] dt-bindings: phy: tegra-xusb: Add usb-role-switch
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v1 2/4] usb: phy: tegra: Hook up init/shutdown callbacks
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v1 1/4] dt-binding: usb: ci-hdrc-usb2: Document NVIDIA Tegra support
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v1 4/4] usb: phy: tegra: Use relaxed versions of readl/writel
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v1 3/4] usb: phy: tegra: Perform general clean up of the code
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v2 0/2] Add yaml DWC2 bindings
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: dwc2: Fix IN FIFO allocation
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• [PATCH 1/2] usb: dwc2: Fix IN FIFO allocation
  • From: John Keeping <john@xxxxxxxxxxxx>
• [PATCH 2/2] usb: dwc2: fix debugfs FIFO count
  • From: John Keeping <john@xxxxxxxxxxxx>
• RE: [PATCH v2 3/3] power/supply: Add generic USB charger driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: usb: Convert DWC2 bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v2 2/2] ARM: dts: exynos: Remove unneeded "snps,dwc2" from hsotg node
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v2 0/2] Add yaml DWC2 bindings
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH v2 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH V3 1/1] usb: serial: option: add ZLP support for 0x1bc7/0x9010
  • From: Daniele Palmas <dnlplm@xxxxxxxxx>
• Re: [PATCH v2 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH v2 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH] usb: mtk-xhci: Do not explicitly set the DMA mask
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: usb: dwc3: Add the Amlogic A1 Family DWC3 Glue Bindings
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-binding: usb: ci-hdrc-usb2: Document NVIDIA Tegra support
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v1 2/4] usb: phy: tegra: Hook up init/shutdown callbacks
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 3/3] usb: dwc3: gadget: Remove END_TRANSFER delay
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 2/3] usb: dwc3: gadget: Delay starting transfer
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 1/3] usb: dwc3: gadget: Check END_TRANSFER completion
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 0/3] usb: dwc3: gadget: Improve END_TRANSFER handling
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [Patch V2 02/18] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: Convert DWC2 bindings to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] usb: phy: ab8500-usb: Keep PHY turned on in UART mode
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] Proper RTS control when buffers fill
  • From: Brant Merryman <Brant.Merryman@xxxxxxxxxx>
• [PATCH] usb: phy: ab8500-usb: Keep PHY turned on in UART mode
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v3 1/1] usb: gadget: add raw-gadget interface
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 7/8] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 1/1] usb: gadget: add raw-gadget interface
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH v4 0/1] usb: gadget: add raw-gadget interface
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v3 1/1] usb: gadget: add raw-gadget interface
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH 2/7] at76c50x-usb: fix endpoint debug message
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] rsi: fix use-after-free on failed probe and unbind
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] USB: serial: cp210x: Enables usb generic functions for throttle/unthrottle to prevent USB data loss.
  • From: Brant Merryman <Brant.Merryman@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 1/1] usb: gadget: add raw-gadget interface
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] ath9k: fix storage endpoint lookup
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH v1 0/4] NVIDIA Tegra USB2 drivers clean up
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v1 4/4] usb: phy: tegra: Use relaxed versions of readl/writel
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v1 2/4] usb: phy: tegra: Hook up init/shutdown callbacks
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v1 1/4] dt-binding: usb: ci-hdrc-usb2: Document NVIDIA Tegra support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v1 3/4] usb: phy: tegra: Perform general clean up of the code
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v3 1/1] usb: gadget: add raw-gadget interface
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v7 7/8] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH v7 7/8] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] usb: xhci: Fix build warning seen with CONFIG_PM=n
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] HID: hiddev: fix mess in hiddev_open()
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v9 2/6] arm: dts: mt2701: Add usb2 device nodes
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb: xhci: Fix build warning seen with CONFIG_PM=n
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] thunderbolt: Add support for USB4
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• KASAN: use-after-free Read in hidinput_hid_event
  • From: syzbot <syzbot+c961cb836a707f66e2f8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• KASAN: slab-out-of-bounds Read in hidinput_hid_event
  • From: syzbot <syzbot+00eaa791c74b27f5e7b1@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] thunderbolt: Add support for USB4
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: amlogic, meson-g12a-usb-ctrl: fix clock names
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v2 4/9] thunderbolt: Add initial support for USB4
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/9] thunderbolt: Populate PG field in hot plug acknowledgment packet
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: xhci: Fix build warning seen with CONFIG_PM=n
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: fix clock names
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH] dt-bindings: usb: Convert DWC2 bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH v2 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v3 1/1] usb: gadget: add raw-gadget interface
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: usb: dwc3: Add the Amlogic A1 Family DWC3 Glue Bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: AW: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>