[PATCH v2 07/14] usb: dwc3: meson-g12a: refactor usb init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Refactor the USB init code patch to handle the Amlogic GXL/GXM needing
to initialize the OTG port as Peripheral mode for the DWC2 IP to probe
correctly.

A secondary, post_init callback is added to setup the OTG PHY mode after
the sub-nodes probe.

Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 46 +++++++++++++++++++++---------
 1 file changed, 33 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 328e74def56f..43b398b7b1f7 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -140,6 +140,8 @@ struct dwc3_meson_g12a_drvdata {
 			     enum phy_mode mode);
 	int (*set_phy_mode)(struct dwc3_meson_g12a *priv, int i,
 			    enum phy_mode mode);
+	int (*usb_init)(struct dwc3_meson_g12a *priv);
+	int (*usb_post_init)(struct dwc3_meson_g12a *priv);
 };
 
 static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
@@ -151,6 +153,8 @@ static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
 static int dwc3_meson_g12a_set_phy_mode(struct dwc3_meson_g12a *priv,
 					int i, enum phy_mode mode);
 
+static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv);
+
 static struct dwc3_meson_g12a_drvdata g12a_drvdata = {
 	.otg_switch_supported = true,
 	.clks = meson_g12a_clocks,
@@ -160,6 +164,7 @@ static struct dwc3_meson_g12a_drvdata g12a_drvdata = {
 	.setup_regmaps = dwc3_meson_g12a_setup_regmaps,
 	.usb2_init_phy = dwc3_meson_g12a_usb2_init_phy,
 	.set_phy_mode = dwc3_meson_g12a_set_phy_mode,
+	.usb_init = dwc3_meson_g12a_usb_init,
 };
 
 static struct dwc3_meson_g12a_drvdata a1_drvdata = {
@@ -171,6 +176,7 @@ static struct dwc3_meson_g12a_drvdata a1_drvdata = {
 	.setup_regmaps = dwc3_meson_g12a_setup_regmaps,
 	.usb2_init_phy = dwc3_meson_g12a_usb2_init_phy,
 	.set_phy_mode = dwc3_meson_g12a_set_phy_mode,
+	.usb_init = dwc3_meson_g12a_usb_init,
 };
 
 struct dwc3_meson_g12a {
@@ -231,15 +237,11 @@ static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
 	return 0;
 }
 
-static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
+static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv,
+				     enum phy_mode mode)
 {
 	int i, ret;
 
-	if (priv->otg_mode == USB_DR_MODE_PERIPHERAL)
-		priv->otg_phy_mode = PHY_MODE_USB_DEVICE;
-	else
-		priv->otg_phy_mode = PHY_MODE_USB_HOST;
-
 	for (i = 0; i < priv->drvdata->num_phys; ++i) {
 		if (!priv->phys[i])
 			continue;
@@ -284,9 +286,10 @@ static void dwc3_meson_g12a_usb3_init(struct dwc3_meson_g12a *priv)
 			FIELD_PREP(USB_R1_P30_PCS_TX_SWING_FULL_MASK, 127));
 }
 
-static void dwc3_meson_g12a_usb_otg_apply_mode(struct dwc3_meson_g12a *priv)
+static void dwc3_meson_g12a_usb_otg_apply_mode(struct dwc3_meson_g12a *priv,
+					       enum phy_mode mode)
 {
-	if (priv->otg_phy_mode == PHY_MODE_USB_DEVICE) {
+	if (mode == PHY_MODE_USB_DEVICE) {
 		regmap_update_bits(priv->usb_glue_regmap, USB_R0,
 				USB_R0_U2D_ACT, USB_R0_U2D_ACT);
 		regmap_update_bits(priv->usb_glue_regmap, USB_R0,
@@ -301,11 +304,12 @@ static void dwc3_meson_g12a_usb_otg_apply_mode(struct dwc3_meson_g12a *priv)
 	}
 }
 
-static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv)
+static int dwc3_meson_g12a_usb_init_glue(struct dwc3_meson_g12a *priv,
+					 enum phy_mode mode)
 {
 	int ret;
 
-	ret = dwc3_meson_g12a_usb2_init(priv);
+	ret = dwc3_meson_g12a_usb2_init(priv, mode);
 	if (ret)
 		return ret;
 
@@ -327,7 +331,7 @@ static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv)
 	if (priv->usb3_ports)
 		dwc3_meson_g12a_usb3_init(priv);
 
-	dwc3_meson_g12a_usb_otg_apply_mode(priv);
+	dwc3_meson_g12a_usb_otg_apply_mode(priv, mode);
 
 	return 0;
 }
@@ -406,7 +410,7 @@ static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv,
 	if (ret)
 		return ret;
 
-	dwc3_meson_g12a_usb_otg_apply_mode(priv);
+	dwc3_meson_g12a_usb_otg_apply_mode(priv, mode);
 
 	return 0;
 }
@@ -553,6 +557,11 @@ static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
 	return 0;
 }
 
+static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv)
+{
+	return dwc3_meson_g12a_usb_init_glue(priv, priv->otg_phy_mode);
+}
+
 static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 {
 	struct dwc3_meson_g12a	*priv;
@@ -620,7 +629,12 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	/* Get dr_mode */
 	priv->otg_mode = usb_get_dr_mode(dev);
 
-	ret = dwc3_meson_g12a_usb_init(priv);
+	if (priv->otg_mode == USB_DR_MODE_PERIPHERAL)
+		priv->otg_phy_mode = PHY_MODE_USB_DEVICE;
+	else
+		priv->otg_phy_mode = PHY_MODE_USB_HOST;
+
+	ret = priv->drvdata->usb_init(priv);
 	if (ret)
 		goto err_disable_clks;
 
@@ -642,6 +656,12 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_phys_power;
 
+	if (priv->drvdata->usb_post_init) {
+		ret = priv->drvdata->usb_post_init(priv);
+		if (ret)
+			goto err_phys_power;
+	}
+
 	ret = dwc3_meson_g12a_otg_init(pdev, priv);
 	if (ret)
 		goto err_phys_power;
-- 
2.22.0




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux