Linux SCSI

• Thread Index

• [PATCH v2 17/26] qedf: fc_rport_priv reference counting fixes
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 16/26] qedf: Add missing return in qedf_scsi_done().
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 15/26] qedf: Wait for upload and link down processing during soft ctx reset.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 14/26] qedf: Add additional checks for io_req->sc_cmd validity.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 13/26] qedf: fixup bit operations.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 12/26] qedf: fixup locking in qedf_restart_rport()
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 11/26] qedf: missing kref_put in qedf_xmit()
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 10/26] qedf: Check for link state before processing LL2 packets and send fipvlan retries.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 07/26] qedf: Use a separate completion for cleanup commands.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 06/26] qedf: Modify abort and tmf handler to handle edge condition and flush.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 09/26] qedf: Add missing fc_disc_init call after allocating lport.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 08/26] qedf: Correct the memory barriers in qedf_ring_doorbell.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 05/26] qedf: Modify flush routine to handle all I/Os and TMF.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 04/26] qedf: Simplify s/g list mapping.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH] sd: Fix a race between closing an sd device and sd I/O
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v2 03/26] qedf: Add missing return in qedf_post_io_req() in the fcport offload check.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 02/26] qedf: Correct xid range overlap between offloaded requests and libfc requests.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 01/26] qedf: Do not retry ELS request if qedf_alloc_cmd fails.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2 00/26] qedf: Misc fixes for the driver.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH] sd: Fix a race between closing an sd device and sd I/O
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [BACKPORT 4.14.y 0/8] candidates from spreadtrum 4.14 product kernel
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] scsi: qla4xxx: fix a potential NULL pointer dereference
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: gdth: Only call dma_free_coherent when buf is not NULL in ioc_general
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] pm8001: remove set but not used variables 'param, sas_ha'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] aacraid: Insure we don't access PCIe space during AER/EEH
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: avoid uninitialized variable warning
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qla4xxx: avoid freeing unallocated dma memory
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: change snprintf to scnprintf for possible overflow
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] drivers: ufs: Add missing MODULE_* information
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: ufs-mediatek: Fix platform_no_drv_owner.cocci warnings
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] sd: Fix a race between closing an sd device and sd I/O
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] sd: Fix a race between closing an sd device and sd I/O
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH] scsi: ses: fix some risks of out of bound access
  • From: "jianchao.wang" <jianchao.w.wang@xxxxxxxxxx>
• Re: [PATCH v2 1/1] treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH v2 1/1] treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH] sd: Fix a race between closing an sd device and sd I/O
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/2] ch: add missing mutex_lock()/mutex_unlock() in ch_release()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 0/2] Remove support for deprecated %pf and %pF in vsprintf
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Remove support for deprecated %pf and %pF in vsprintf
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: fix ata_port_wait_eh() hung caused by missing to wake up eh thread
  • From: "zhengbin (A)" <zhengbin13@xxxxxxxxxx>
• Re: [PATCH] scsi: fix ata_port_wait_eh() hung caused by missing to wake up eh thread
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v5 0/3] UFS on APQ8098/MSM8998
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH] scsi: fix ata_port_wait_eh() hung caused by missing to wake up eh thread
  • From: "zhengbin (A)" <zhengbin13@xxxxxxxxxx>
• Re: [PATCH] usb: uas: fix usb subsystem hang after power off hub port
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• RE: [PATCH] usb: uas: fix usb subsystem hang after power off hub port
  • From: <Kento.A.Kobayashi@xxxxxxxx>
• Re: [PATCH] scsi: fix ata_port_wait_eh() hung caused by missing to wake up eh thread
  • From: Pavel Tikhomirov <ptikhomirov@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] vsprintf: Remove support for %pF and %pf in favour of %pS and %ps
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 1/2] treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 2/2] vsprintf: Remove support for %pF and %pf in favour of %pS and %ps
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 1/2] ch: add missing mutex_lock()/mutex_unlock() in ch_release()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [Bug 199435] HPSA + P420i resetting logical Direct-Access never complete
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH] scsi: fix ata_port_wait_eh() hung caused by missing to wake up eh thread
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• Re: [PATCH -next] pm8001: remove set but not used variables 'param, sas_ha'
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• [PATCH] scsi: ses: fix some risks of out of bound access
  • From: Jianchao Wang <jianchao.w.wang@xxxxxxxxxx>
• Re: [PATCH RESEND v2 5/5] block: check_events: don't bother with events if unsupported
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH RESEND v2 4/5] Revert "block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers"
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH RESEND v2 3/5] Revert "ide: unexport DISK_EVENT_MEDIA_CHANGE for ide-gd and ide-cd"
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH RESEND v2 2/5] block: disk_events: introduce event flags
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH RESEND v2 1/5] block: genhd: remove async_events field
  • From: Hannes Reinecke <hare@xxxxxxx>
• RE: [PATCH] scsi: qla4xxx: fix a potential NULL pointer dereference
  • From: Manish Rangankar <mrangankar@xxxxxxxxxxx>
• Re: [PATCH] Avoid that a kernel warning appears during system resume
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: qedi: Fix global-out-of-bounds bug in qedi dbg function
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH v3 0/5] scsi: ufs: Fix regulator operations and remove "<name>-fixed-regulator" device tree property
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: Debug scsi message in linux 4.19.31
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] Remove support for deprecated %pf and %pF in vsprintf
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Remove support for deprecated %pf and %pF in vsprintf
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.1-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: Debug scsi message in linux 4.19.31
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: qla4xxx: fix a potential NULL pointer dereference
  • From: Aditya Pakki <pakki001@xxxxxxx>
• [GIT PULL] SCSI fixes for 5.1-rc1
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH -next] scsi: qla2xxx: Remove useless set memory to zero use memset()
  • From: Yue Haibing <yuehaibing@xxxxxxxxxx>
• [Bug 201313] pm80xx mpi_ssp_completion 1883:SAS Address of IO Failure Drive:
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Some questions about scsi_eh_wakeup
  • From: "zhengbin (A)" <zhengbin13@xxxxxxxxxx>
• Latest versions of rtslib, configshell and targetcli
  • From: TomK <tomkcpr@xxxxxxxxxxx>
• Latest versions of rtslib, configshell and targetcli
  • From: TomK <tomkcpr@xxxxxxxxxxx>
• [PATCH -next] pm8001: remove set but not used variables 'param, sas_ha'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH RESEND v2 3/5] Revert "ide: unexport DISK_EVENT_MEDIA_CHANGE for ide-gd and ide-cd"
  • From: Martin Wilck <mwilck@xxxxxxxx>
• [PATCH RESEND v2 4/5] Revert "block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers"
  • From: Martin Wilck <mwilck@xxxxxxxx>
• [PATCH RESEND v2 5/5] block: check_events: don't bother with events if unsupported
  • From: Martin Wilck <mwilck@xxxxxxxx>
• [PATCH RESEND v2 2/5] block: disk_events: introduce event flags
  • From: Martin Wilck <mwilck@xxxxxxxx>
• [PATCH RESEND v2 1/5] block: genhd: remove async_events field
  • From: Martin Wilck <mwilck@xxxxxxxx>
• [PATCH RESEND v2 0/5] block: skip media change event handling if unsupported
  • From: Martin Wilck <mwilck@xxxxxxxx>
• Re: [PATCH 1/2] treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
  • From: Mike Rapoport <rppt@xxxxxxxxxxxxx>
• [Bug 199435] HPSA + P420i resetting logical Direct-Access never complete
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH] aacraid: Insure we don't access PCIe space during AER/EEH
  • From: Dave Carroll <david.carroll@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] Remove support for deprecated %pf and %pF in vsprintf
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: avoid uninitialized variable warning
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• [BACKPORT 4.14.y 0/8] candidates from spreadtrum 4.14 product kernel
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [BACKPORT 4.14.y 1/8] scsi: ufs: fix wrong command type of UTRD for UFSHCI v2.1
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] scsi: gdth: Only call dma_free_coherent when buf is not NULL in ioc_general
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH] scsi: qla4xxx: avoid freeing unallocated dma memory
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH] scsi: gdth: Only call dma_free_coherent when buf is not NULL in ioc_general
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/2] treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
  • From: David Sterba <dsterba@xxxxxxx>
• [PATCH] scsi: lpfc: avoid uninitialized variable warning
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] scsi: qla4xxx: avoid freeing unallocated dma memory
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2] scsi: qla4xxx: Don't call dma_free_coherent when buf is NULL
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 0/2] Remove support for deprecated %pf and %pF in vsprintf
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Remove support for deprecated %pf and %pF in vsprintf
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 0/2] Remove support for deprecated %pf and %pF in vsprintf
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH 1/2] treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH 2/2] vsprintf: Remove support for %pF and %pf in favour of %pS and %ps
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH 04/26] qedf: Simplify s/g list mapping.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH v4] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v4] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH v5] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• Re: [PATCH v4] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v4] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: "zhengbin (A)" <zhengbin13@xxxxxxxxxx>
• Re: [PATCH v4] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [RFC PATCH v2] scsi: fix oops in scsi_uninit_cmd()
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2] ch: add missing mutex_lock()/mutex_unlock() in ch_release()
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v4] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• Re: [RFC PATCH v2] scsi: fix oops in scsi_uninit_cmd()
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC PATCH v2] scsi: fix oops in scsi_uninit_cmd()
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH 1/2] ch: add missing mutex_lock()/mutex_unlock() in ch_release()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/2] ch: add missing mutex_lock()/mutex_unlock() in ch_release()
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH 1/2] ch: add missing mutex_lock()/mutex_unlock() in ch_release()
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH 2/2] sd: Inline sd_probe_part2()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/2] ch: add missing mutex_lock()/mutex_unlock() in ch_release()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] sd: TEST_UNIT_READY 3-times - "media_not_present"
  • From: Samo Pogačnik <samo_pogacnik@xxxxxxx>
• Re: [RFC PATCH v2] scsi: fix oops in scsi_uninit_cmd()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [PATCH] mpt3sas: Fix kernel panic occurs during expander reset
  • From: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
• Re: [PATCH v3] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 0/8] phy: qcom-ufs: Enable regulators to be off in suspend
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH v5 8/8] phy: ufs-qcom: Refactor all init steps into phy_poweron
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH v5 7/8] phy: qcom: Utilize UFS reset controller
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH v5 6/8] scsi: ufs: qcom: Expose the reset controller for PHY
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH v5 0/8] phy: qcom-ufs: Enable regulators to be off in suspend
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH] scsi: lpfc: change snprintf to scnprintf for possible overflow
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH v2] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: ufs-mediatek: fix uninitialized variable
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v2] drivers: ufs: Add missing MODULE_* information
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2] drivers: ufs: Add missing MODULE_* information
  • From: Anders Roxell <anders.roxell@xxxxxxxxxx>
• Re: [PATCH] drivers: ufs: Add missing MODULE_* information
  • From: Anders Roxell <anders.roxell@xxxxxxxxxx>
• [PATCH] scsi: ufs-mediatek: fix uninitialized variable
  • From: Anders Roxell <anders.roxell@xxxxxxxxxx>
• Re: [PATCH] drivers: ufs: Add missing MODULE_* information
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH] drivers: ufs: Add missing MODULE_* information
  • From: Anders Roxell <anders.roxell@xxxxxxxxxx>
• Re: Panic when rebooting target server testing srp on 5.0.0-rc2
  • From: Laurence Oberman <loberman@xxxxxxxxxx>
• Issues with a SuperMicro system with LSI SAS controller (mpt3sas)
  • From: Freaky <freaky2000@xxxxxxxxx>
• Re: [PATCH] scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH] scsi: smartpqi: Reporting unhandled SCSI errors
  • From: Erwan Velu <erwanaliasr1@xxxxxxxxx>
• Re: [PATCH v3] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH -next] scsi: ufs-mediatek: Fix platform_no_drv_owner.cocci warnings
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v3] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• Re: [PATCH v2] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: "jianchao.wang" <jianchao.w.wang@xxxxxxxxxx>
• Re: [PATCH v2] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH v2] blk-mq: fix a hung issue when set device state to blocked and restore running
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH -next] scsi: ufs-mediatek: Fix platform_no_drv_owner.cocci warnings
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH 4/4] ibmvfc: Clean up transport events
  • From: Tyrel Datwyler <tyreld@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] ibmvfc: Byte swap status and error codes when logging
  • From: Tyrel Datwyler <tyreld@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] ibmvfc: Add failed PRLI to cmd_status lookup array
  • From: Tyrel Datwyler <tyreld@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] ibmvfc: Remove "failed" from logged errors
  • From: Tyrel Datwyler <tyreld@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] sd: Inline sd_probe_part2()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][next] scsi: target: fix unsigned comparision with less than zero
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 2/2] ibmvscsi: Fix empty event pool access during host removal
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/2] ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs-mediatek: Avoid using ret uninitialized in ufs_mtk_setup_clocks
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] lpfc: Fixup eq_clr_intr references
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH 2/2] ibmvscsi: Fix empty event pool access during host removal
  • From: Tyrel Datwyler <tyreld@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
  • From: Tyrel Datwyler <tyreld@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: ufs-mediatek: Avoid using ret uninitialized in ufs_mtk_setup_clocks
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH -next] scsi: ufs-mediatek: Make some symbols static
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH] scsi: ufs-mediatek: Avoid using ret uninitialized in ufs_mtk_setup_clocks
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH] scsi: mptscsih: Mark expected switch fall-throughs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: Panic when rebooting target server testing srp on 5.0.0-rc2
  • From: Laurence Oberman <loberman@xxxxxxxxxx>
• Re: Panic when rebooting target server testing srp on 5.0.0-rc2
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/2] sd: Inline sd_probe_part2()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/2] sd: Inline sd_probe_part2()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] sd: Inline sd_probe_part2()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 1/2] sd: Rely on the driver core for asynchronous probing
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 0/2] sd: Rely on the driver core for asynchronous probing
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH -next] scsi: ufs-mediatek: Make some symbols static
  • From: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>
• Re: [PATCH] scsi: gdth: Only call dma_free_coherent when buf is not NULL in ioc_general
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH] scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH] scsi: ufs-mediatek: Avoid using ret uninitialized in ufs_mtk_setup_clocks
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH] mpt3sas: Fix kernel panic occurs during expander reset
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• Re: [PATCH 25/30] lpfc: Reduce memory footprint for lpfc_queue
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH] lpfc: Fixup eq_clr_intr references
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH][next] scsi: target: fix unsigned comparision with less than zero
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• Re: [PATCH][next] scsi: target: fix unsigned comparision with less than zero
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH][next] scsi: target: fix unsigned comparision with less than zero
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• Re: [PATCH] scsi: qla2xxx: Simplify conditional check
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH] scsi: mpt3sas: fix indentation issue
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH][next] scsi: target: fix unsigned comparision with less than zero
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] scsi: qla2xxx: Simplify conditional check
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [EXT] Re: [PATCH v4 09/14] qla2xxx: Update flash read/write routine
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH 25/30] lpfc: Reduce memory footprint for lpfc_queue
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 25/30] lpfc: Reduce memory footprint for lpfc_queue
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: Panic when rebooting target server testing srp on 5.0.0-rc2
  • From: Laurence Oberman <loberman@xxxxxxxxxx>
• [PATCH -next] scsi: ufs-mediatek: Make some symbols static
  • From: Yue Haibing <yuehaibing@xxxxxxxxxx>
• Panic when rebooting target server testing srp on 5.0.0-rc2
  • From: Laurence Oberman <loberman@xxxxxxxxxx>
• [PATCH 2/2] ch: fixup refcounting imbalance for SCSI devices
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 1/2] ch: add missing mutex_lock()/mutex_unlock() in ch_release()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 0/2] ch: fixup refcounting imbalance for SCSI devices
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
  • From: John Garry <john.garry@xxxxxxxxxx>
• [RFC v2 11/11] arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [RFC v2 07/11] scsi: ufs: Add support for specifying OPP tables in DT
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [RFC v2 05/11] arm64: dts: sdm845: Add OPP table for all qup devices
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [RFC v2 04/11] spi: spi-geni-qcom: Use OPP API to set clk/perf state
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [RFC v2 03/11] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [RFC v2 00/11] DVFS in the OPP core
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [RFC v2 10/11] drm/msm: dsi: Use OPP API to set clk/perf state
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [RFC v2 08/11] arm64: dts: sdm845: Add ufs opps and power-domains
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [RFC v2 09/11] drm/msm/dpu: Use OPP API to set clk/perf state
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [RFC v2 06/11] scsi: ufs: Add support to manage multiple power domains in ufshcd-pltfrm
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [RFC v2 02/11] OPP: Make dev_pm_opp_set_rate() with freq=0 as valid
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] phy: qcom-ufs: Enable regulators to be off in suspend
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v4 09/14] qla2xxx: Update flash read/write routine
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH 25/30] lpfc: Reduce memory footprint for lpfc_queue
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH 25/30] lpfc: Reduce memory footprint for lpfc_queue
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next] scsi: mvumi: Using plain integer as NULL pointer
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: qedi: Remove set but not used variable 'cls_sess'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 04/12] scsi: fix typo
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] scsi: qla2xxx: Fix for a formatting issue and typo in qla_bsg.c
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] mptfusion: remove set but not used variable 'req_idx, frameOffset'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: mpt fusion: fix indentation issues
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: mvsas: clean up a few indentation issues
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: atp870u: clean up code style and indentation issues
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qlogicfas408: clean up a couple of indentation issues
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: dpt_i2o: clean up indentation issues, remove spaces
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v6 0/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 0/8] phy: qcom-ufs: Enable regulators to be off in suspend
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH] scsi_debug: fix write_same with virtual_gb problem
  • From: James Bottomley <jejb@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi_debug: fix write_same with virtual_gb problem
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi_debug: fix write_same with virtual_gb problem
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi_debug: fix write_same with virtual_gb problem
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi_debug: fix write_same with virtual_gb problem
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 0/4] scsi: cleanup hardcoding by replacing 0 by HCTX_TYPE_DEFAULT
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: ufs: fix a missing check of devm_reset_control_get
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] qla2xxx: fixes for qla2xxx
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: pm8001: clean up various indentation issues
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] Avoid that a kernel warning appears during system resume
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: Reminder: [PATCH v2 0/5] block: skip media change event handling if unsupported
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi/NCR5380: Remove set but unused variable
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi/NCR5380: Avoid compiler warning when -Wimplicit-fallthrough is enabled
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] Also call destroy_rcu_head() for passthrough requests
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] Remove OSD include files
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: remove the scsi_ioctl_reset export
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: reshuffle no_scsi2_lun_in_cdb for better alignment
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH] scsi: ufs: Fix to check the return value of alloc_ordered_workqueue
  • From: Aditya Pakki <pakki001@xxxxxxx>
• Re: [PATCH 00/30] lpfc updates for 12.2.0.1
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v4 00/14] qla2xxx: Add support for ISP28XX (Gen7) adapter
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 14/38] vfs: Convert ocxlflash to fs_context
  • From: "Matthew R. Ochs" <mrochs@xxxxxxxxxxxxx>
• 5.1-rc1: mpt init crash in scsi_map_dma, dma_4v_map_sg on sparc64
  • From: Meelis Roos <mroos@xxxxxxxx>
• Re: [PATCH] Also call destroy_rcu_head() for passthrough requests
  • From: Hannes Reinecke <hare@xxxxxxxx>
• [PATCH] scsi: ufs: Check for return value of create_singlethread_workqueue
  • From: Aditya Pakki <pakki001@xxxxxxx>
• Re: [v1 0/7] Irq poll to address cpu lockup.
  • From: Suganath Prabu Subramani <suganath-prabu.subramani@xxxxxxxxxxxx>
• Re: [PATCH v3 1/5] scsi: ufs: Remove unused min_uA field in struct ufs_vreg
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• [PATCH] Remove OSD include files
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [BUG] scsi: ses: out of bound accessing in ses_enclosure_data_process
  • From: "jianchao.wang" <jianchao.w.wang@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Fix to avoid a potential NULL pointer dereference
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• [PATCH] scsi: ufs: Fix to avoid a potential NULL pointer dereference
  • From: Aditya Pakki <pakki001@xxxxxxx>
• Re: [PATCH 04/26] qedf: Simplify s/g list mapping.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v6 0/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v6 0/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH] scsi: lpfc_nvme: Fix wrong sizeof argument
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• Re: [v1 0/7] Irq poll to address cpu lockup.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: target: add device product id and revision configfs attributes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: iscsi: flush running unbind operations when removing a session
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/4] hpsa updates
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/5] smartpqi updates
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH 00/14] Convert block layer & drivers to XArray
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: lpfc_nvme: Fix wrong sizeof argument
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] scsi: lpfc_nvme: Fix wrong sizeof argument
  • From: James Bottomley <jejb@xxxxxxxxxxxxx>
• [PATCH] scsi: lpfc_nvme: Fix wrong sizeof argument
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] qla2xxx: Fix NULL pointer crash due to stale CPUID
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH] Also call destroy_rcu_head() for passthrough requests
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [BUG] scsi: ses: out of bound accessing in ses_enclosure_data_process
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 1/2] qla2xxx: Fix FC-AL connection target discovery
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 2/2] qla2xxx: Fix NULL pointer crash due to stale CPUID
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH] scsi: pm8001: clean up various indentation issues
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• RE: [EXT] [PATCH v6 3/7] scsi: ufs-hisi: Re-factor ufshcd_get_pwr_dev_param
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] [PATCH v6 2/7] scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] [PATCH v6 1/7] scsi: ufs: Introduce ufshcd_get_pwr_dev_param
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [BUG] scsi: ses: out of bound accessing in ses_enclosure_data_process
  • From: "jianchao.wang" <jianchao.w.wang@xxxxxxxxxx>
• Re: [BUG] scsi: ses: out of bound accessing in ses_enclosure_data_process
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [BUG] scsi: ses: out of bound accessing in ses_enclosure_data_process
  • From: Junxiao Bi <junxiao.bi@xxxxxxxxxx>
• Re: [RFC PATCH v2] scsi: fix oops in scsi_uninit_cmd()
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [BUG] scsi: ses: out of bound accessing in ses_enclosure_data_process
  • From: "jianchao.wang" <jianchao.w.wang@xxxxxxxxxx>
• [PATCH v3 1/5] scsi: ufs: Remove unused min_uA field in struct ufs_vreg
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v3 5/5] scsi: ufs: Remove "<name>-fixed-regulator" device tree property
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• scsi: ufs: Fix regulator operations and remove "<name>-fixed-regulator" device tree property
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v3 2/5] scsi: ufs: Avoid configuring undefined voltage range on a regulator
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v3 4/5] scsi: ufs: Change "<name>-max-microamp" to non-mandatory property
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v3 0/5] scsi: ufs: Fix regulator operations and remove "<name>-fixed-regulator" device tree property
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v3 3/5] scsi: ufs: Fix regulator load and icc-level configuration
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH] scsi: pm8001: clean up various indentation issues
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] Avoid that a kernel warning appears during system resume
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] Avoid that a kernel warning appears during system resume
  • From: Martin Steigerwald <martin@xxxxxxxxxxxx>
• Re: [PATCH 04/26] qedf: Simplify s/g list mapping.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] scsi: libcxgbi: remove uninitialized variable len
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] Avoid that a kernel warning appears during system resume
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [GIT PULL] final round of SCSI updates for the 5.0+ merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] Avoid that a kernel warning appears during system resume
  • From: Martin Steigerwald <martin@xxxxxxxxxxxx>
• [PATCH v6 6/7] phy: mediatek: Add UFS M-PHY driver
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v6 7/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v6 4/7] dt-bindings: phy: Add document for phy-mtk-ufs
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v6 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v6 3/7] scsi: ufs-hisi: Re-factor ufshcd_get_pwr_dev_param
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v6 1/7] scsi: ufs: Introduce ufshcd_get_pwr_dev_param
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v6 0/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v6 2/7] scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [RFC PATCH v2] scsi: fix oops in scsi_uninit_cmd()
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH 04/12] scsi: fix typo
  • From: Matteo Croce <mcroce@xxxxxxxxxx>
• [GIT PULL] final round of SCSI updates for the 5.0+ merge window
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] Avoid that a kernel warning appears during system resume
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v5 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: kernel 5.0 blk_clear_pm_only triggers a warning during resume
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 2/2] qla2xxx: Fix NULL pointer crash due to stale CPUID
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 0/2] qla2xxx: fixes for qla2xxx
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 1/2] qla2xxx: Fix FC-AL connection target discovery
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH] scsi: remove the scsi_ioctl_reset export
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: ideas for fix to scsi_ioctl_reset
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Reminder: [PATCH v2 0/5] block: skip media change event handling if unsupported
  • From: Martin Wilck <mwilck@xxxxxxxx>
• Re: [PATCH 00/26] qedf: Misc fixes for the driver.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v2 3/4] scsi: ufs: change "<name>-max-microamp" to non-mandatory property
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 1/4] scsi: ufs: remove unused min_uA field in struct ufs_vreg
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 2/4] scsi: ufs: fix regulator set load and icc-level configuration
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 4/4] scsi: ufs: remove "<name>-fixed-regulator" device tree property
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• scsi: ufs: fix regulator operations and remove "<name>-fixed-regulator" device tree property
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 0/4] scsi: ufs: fix regulator operations and remove "<name>-fixed-regulator" device tree property
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: ideas for fix to scsi_ioctl_reset
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: ideas for fix to scsi_ioctl_reset
  • From: Hannes Reinecke <hare@xxxxxxxx>
• [PATCH] scsi: remove the scsi_ioctl_reset export
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: ideas for fix to scsi_ioctl_reset
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [RFC PATCH] scsi: fix oops in scsi_uninit_cmd()
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH v2] scsi: ufs: fix a missing check of devm_reset_control_get
  • From: Kangjie Lu <kjlu@xxxxxxx>
• Re: [PATCH 00/26] qedf: Misc fixes for the driver.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• RE: [PATCH] usb: uas: fix usb subsystem hang after power off hub port
  • From: <Kento.A.Kobayashi@xxxxxxxx>
• [PATCH 5/5] smartpqi: bump driver version
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH 4/5] smartpqi: add spdx
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH 3/5] smartpqi: update copyright
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH 1/5] smartpqi: increase LUN reset timeout
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH 2/5] smartpqi: add H3C controller IDs
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH 0/5] smartpqi updates
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v5 4/7] dt-bindings: phy: Add document for phy-mtk-ufs
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH 14/38] vfs: Convert ocxlflash to fs_context
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: ideas for fix to scsi_ioctl_reset
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: ideas for fix to scsi_ioctl_reset
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1 1/2] scsi: ufs: cleanup unused min_uA in struct ufs_vreg
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v1 1/2] scsi: ufs: cleanup unused min_uA in struct ufs_vreg
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH] simscsi: use request tag instead of serial_number
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: aacraid: Fix performance issue(QD) on logical drives
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: libfc: Fix potential NULL pointer dereference
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v1 2/2] scsi: ufs: fix regulator set load and icc-level configuration
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 1/2] scsi: ufs: cleanup unused min_uA in struct ufs_vreg
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 0/2] scsi: ufs: fix up regulator operations
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• scsi: ufs: fix up regulator operations
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• RE: [PATCH] scsi: ufs: fix a missing check of devm_reset_control_get
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• RE: [PATCH v5 0/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v5 6/7] phy: mediatek: Add UFS M-PHY driver
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• RE: [PATCH v5 0/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH v5 6/7] phy: mediatek: Add UFS M-PHY driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [v1 0/7] Irq poll to address cpu lockup.
  • From: Suganath Prabu Subramani <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH] scsi: ufs: fix a missing check of devm_reset_control_get
  • From: Kangjie Lu <kjlu@xxxxxxx>
• [PATCH 1/2] scsi: qla4xxx: do not use __constant_cpu_to_leXX
  • From: Sergey Senozhatsky <sergey.senozhatsky.work@xxxxxxxxx>
• [PATCH 2/2] scsi: qla2xxx: do not use __constant_cpu_to_leXX
  • From: Sergey Senozhatsky <sergey.senozhatsky.work@xxxxxxxxx>
• [PATCH] scsi: qla4xxx: fix a potential NULL pointer dereference
  • From: Kangjie Lu <kjlu@xxxxxxx>
• scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v5 4/7] dt-bindings: phy: Add document for phy-mtk-ufs
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v5 2/7] scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v5 6/7] phy: mediatek: Add UFS M-PHY driver
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v5 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v5 7/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v5 0/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v5 1/7] scsi: ufs: Introduce ufshcd_get_pwr_dev_param
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v5 3/7] scsi: ufs-hisi: Re-factor ufshcd_get_pwr_dev_param
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: ideas for fix to scsi_ioctl_reset
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v3 4/7] dt-bindings: phy: Add document for phy-mtk-ufs
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [BUG] scsi: ses: out of bound accessing in ses_enclosure_data_process
  • From: "jianchao.wang" <jianchao.w.wang@xxxxxxxxxx>
• Re: ideas for fix to scsi_ioctl_reset
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: kernel 5.0 blk_clear_pm_only triggers a warning during resume
  • From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
• Re: [RFC PATCH] scsi: fix oops in scsi_uninit_cmd()
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: ideas for fix to scsi_ioctl_reset
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [RFC PATCH] scsi: fix oops in scsi_uninit_cmd()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH RESEND] aacraid: Fix performance issue (QD) on logical drives
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH RESEND] aacraid: Fix performance issue (QD) on logical drives
  • From: Sagar Biradar <sagar.biradar@xxxxxxxxxxxxx>
• Re: ideas for fix to scsi_ioctl_reset
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• Re: ideas for fix to scsi_ioctl_reset
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup()
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• ideas for fix to scsi_ioctl_reset
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 14/60] scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 12/48] scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 09/33] scsi: core: reset host byte in DID_NEXUS_FAILURE case
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 03/15] scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 3.18 02/10] scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 3.18 03/10] scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 04/15] scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 04/24] scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 08/33] scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] mpt3sas: Fix kernel panic occurs during expander reset
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• Re: [PATCH v3 4/7] dt-bindings: phy: Add document for phy-mtk-ufs
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v3 6/7] phy: mediatek: Add UFS M-PHY driver
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v3 6/7] phy: mediatek: Add UFS M-PHY driver
  • From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
• [PATCH v4 2/7] scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v4 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v4 1/7] scsi: ufs: Introduce ufshcd_get_pwr_dev_param
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v4 7/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v4 4/7] dt-bindings: phy: Add document for phy-mtk-ufs
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v4 6/7] phy: mediatek: Add UFS M-PHY driver
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v4 0/7] scsi: ufs-mediatek: Add ufshci and ufsphy support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v4 3/7] scsi: ufs-hisi: Re-factor ufshcd_get_pwr_dev_param
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v3 4/7] dt-bindings: phy: Add document for phy-mtk-ufs
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: kernel 5.0 blk_clear_pm_only triggers a warning during resume
  • From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
• [PATCH 29/30] lpfc: Update Copyright in driver version
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 30/30] lpfc: Update lpfc version to 12.2.0.1
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 27/30] lpfc: Fix duplicate log message numbers
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 28/30] lpfc: Enhance 6072 log string
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 26/30] lpfc: Specify node affinity for queue memory allocation
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 25/30] lpfc: Reduce memory footprint for lpfc_queue
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 24/30] lpfc: Add loopback testing to trunking mode
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 23/30] lpfc: Fix link speed reporting for 4-link trunk
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 22/30] lpfc: Fix handling of trunk links state reporting
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 20/30] lpfc: Correct boot bios information to FDMI registration
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 19/30] lpfc: Fix HDMI2 registration string for symbolic name
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 18/30] lpfc: Fix fc4type information for FDMI
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 21/30] lpfc: Fix protocol support on G6 and G7 adapters
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 12/30] lpfc: Convert bootstrap mbx polling from msleep to udelay
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 17/30] lpfc: Fix FDMI manufacturer attribute value
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 16/30] lpfc: Fix io lost on host resets
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 15/30] lpfc: Fix mailbox hang on adapter init
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 14/30] lpfc: Fix driver crash in target reset handler
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 11/30] lpfc: Coordinate adapter error handling with offline handling
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 13/30] lpfc: Correct localport timeout duration error
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 10/30] lpfc: Stop adapter if pci errors detected
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 09/30] lpfc: Fix deadlock due to nested hbalock call
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 05/30] lpfc: Fix location of SCSI ktime counters
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 06/30] lpfc: Fix nvmet async receive buffer replenishment
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 08/30] lpfc: Fix nvmet handling of first burst cmd
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 07/30] lpfc: Fix lpfc_nvmet_mrq attribute handling when 0
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 04/30] lpfc: Fix SLI3 commands being issued on SLI4 devices.
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 01/30] lpfc: Resolve inconsistent check of hdwq in lpfc_scsi_cmd_iocb_cmpl
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 03/30] lpfc: Fix use-after-free mailbox cmd completion
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 02/30] lpfc: Resolve irq-unsafe lockdep heirarchy warning in lpfc_io_free
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 00/30] lpfc updates for 12.2.0.1
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 3/4] hpsa: remove timeout from TURs
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH 4/4] hpsa: bump driver version
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH 2/4] hpsa: correct device id issues
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH 1/4] hpsa: check for lv removal
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH 0/4] hpsa updates
  • From: Don Brace <don.brace@xxxxxxxxxxxxx>
• [PATCH v4 12/14] qla2xxx: Add 28xx flash primary/secondary status/image mechanism
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 01/14] qla2xxx: Add fw_attr and port_no SysFS node
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 14/14] qla2xxx: Update driver version to 10.01.00.15-k
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 02/14] qla2xxx: Remove FW default template
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 13/14] qla2xxx: Secure flash update support for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 09/14] qla2xxx: Update flash read/write routine
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 07/14] qla2xxx: Cleanups for NVRAM/Flash read/write path
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 11/14] qla2xxx: Simplification of register address used in qla_tmpl.c
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 08/14] qla2xxx: Add support for multiple fwdump templates/segments
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 10/14] qla2xxx: Correction and improvement to fwdt processing
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 05/14] qla2xxx: Add Serdes support for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 04/14] qla2xxx: Add Device ID for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 06/14] qla2xxx: Correctly report max/min supported speeds
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 00/14] qla2xxx: Add support for ISP28XX (Gen7) adapter
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v4 03/14] qla2xxx: Fix routine qla27xx_dump_{mpi|ram}().
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH] scsi: cxgb4i: Fix potential NULL pointer dereference
  • From: Aditya Pakki <pakki001@xxxxxxx>
• Re: [PATCH v3 07/14] qla2xxx: Cleanups for NVRAM/Flash read/write path
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] usb: uas: fix usb subsystem hang after power off hub port
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: kernel 5.0 blk_clear_pm_only triggers a warning during resume
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] simscsi: use request tag instead of serial_number
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: kernel 5.0 blk_clear_pm_only triggers a warning during resume
  • From: Jens Axboe <axboe@xxxxxxxxx>
• RE: [PATCH 2/3] scsi: ufs: Add error checks for pm_runtime_get_sync()
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 4/7] dt-bindings: phy: Add document for phy-mtk-ufs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] scsi: qla2xxx: Fix for a formatting issue and typo in qla_bsg.c
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 2/2] scsi: qla2xxx: Fix a small typo in qla_bsg.c
  • From: "Milan P. Gandhi" <mgandhi@xxxxxxxxxx>
• [PATCH 1/2] scsi: qla2xxx: Fix comment alignment in qla_bsg.c
  • From: "Milan P. Gandhi" <mgandhi@xxxxxxxxxx>
• [PATCH 0/2] scsi: qla2xxx: Fix for a formatting issue and typo in qla_bsg.c
  • From: "Milan P. Gandhi" <mgandhi@xxxxxxxxxx>
• Re: [PATCH] scsi: qla2xxx: Fix a small typo in qla_bsg.c
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH] scsi: qla2xxx: Fix a small typo in qla_bsg.c
  • From: "Milan P. Gandhi" <mgandhi@xxxxxxxxxx>
• Re: [PATCH] Fix for a small typo
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] Fix for a small typo
  • From: "Milan P. Gandhi" <mgandhi@xxxxxxxxxx>
• Re: [PATCH] Fix for a small typo
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] Minor fix for comment section
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] Fix for a small typo
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH] mpt3sas: Fix kernel panic occurs during expander reset
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH] Fix for a small typo
  • From: "Milan P. Gandhi" <mgandhi@xxxxxxxxxx>
• Re: [PATCH] mpt3sas: Fix kernel panic occurs during expander reset
  • From: Michal Soltys <soltys@xxxxxxxx>
• [PATCH] Minor fix for comment section
  • From: "Milan P. Gandhi" <mgandhi@xxxxxxxxxx>
• [PATCH] simscsi: use request tag instead of serial_number
  • From: Hannes Reinecke <hare@xxxxxxx>
• [Bug 202859] Corruption when reading from disk with 32-core processor (megaraid_sas)
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [GIT PULL] first round of SCSI updates for the 5.0+ merge window
  • From: Hannes Reinecke <hare@xxxxxxxx>
• kernel 5.0 blk_clear_pm_only triggers a warning during resume
  • From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
• [Bug 202859] Corruption when reading from disk with 32-core processor (megaraid_sas)
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202859] Corruption when reading from disk with 32-core processor (megaraid_sas)
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH 0/4] scsi: cleanup hardcoding by replacing 0 by HCTX_TYPE_DEFAULT
  • From: Dongli Zhang <dongli.zhang@xxxxxxxxxx>
• [PATCH 3/4] scsi: qla2xxx: replace 0 by HCTX_TYPE_DEFAULT to index blk_mq_tag_set->map
  • From: Dongli Zhang <dongli.zhang@xxxxxxxxxx>
• [PATCH 1/4] scsi: replace 0 by HCTX_TYPE_DEFAULT to index blk_mq_tag_set->map
  • From: Dongli Zhang <dongli.zhang@xxxxxxxxxx>
• [PATCH 4/4] scsi: smartpqi: replace 0 by HCTX_TYPE_DEFAULT to index blk_mq_tag_set->map
  • From: Dongli Zhang <dongli.zhang@xxxxxxxxxx>
• [PATCH 2/4] scsi: virtio_scsi: replace 0 by HCTX_TYPE_DEFAULT to index blk_mq_tag_set->map
  • From: Dongli Zhang <dongli.zhang@xxxxxxxxxx>
• [Bug 202859] Corruption when reading from disk with 32-core processor (megaraid_sas)
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH AUTOSEL 4.20 43/52] scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 36/44] scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [GIT PULL] first round of SCSI updates for the 5.0+ merge window
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [GIT PULL] first round of SCSI updates for the 5.0+ merge window
  • From: Tony Luck <tony.luck@xxxxxxxxx>
• [PATCH v3 07/14] qla2xxx: Cleanups for NVRAM/Flash read/write path
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 01/14] qla2xxx: Add fw_attr and port_no SysFS node
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 13/14] qla2xxx: Secure flash update support for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 12/14] qla2xxx: Add 28xx flash primary/secondary status/image mechanism
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 09/14] qla2xxx: Update flash read/write routine
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 14/14] qla2xxx: Update driver version to 10.01.00.15-k
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 10/14] qla2xxx: Correction and improvement to fwdt processing
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 11/14] qla2xxx: Simplification of register address used in qla_tmpl.c
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 08/14] qla2xxx: Add support for multiple fwdump templates/segments
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 06/14] qla2xxx: Correctly report max/min supported speeds
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 04/14] qla2xxx: Add Device ID for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 05/14] qla2xxx: Add Serdes support for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 03/14] qla2xxx: Fix routine qla27xx_dump_{mpi|ram}().
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 02/14] qla2xxx: Remove FW default template
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v3 00/14] qla2xxx: Add support for ISP28XX (Gen7) adapter
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH v3] scsi: smartpqi_init: Reporting 'logical unit failure'
  • From: Erwan Velu <e.velu@xxxxxxxxxx>
• Re: [PATCH v3] scsi: smartpqi_init: Reporting 'logical unit failure'
  • From: Erwan Velu <e.velu@xxxxxxxxxx>
• Re: [PATCH] scsi/dpt_i2o.c: Use dma_zalloc_coherent
  • From: James Bottomley <jejb@xxxxxxxxxxxxxxxxxx>
• [PATCH] scsi/dpt_i2o.c: Use dma_zalloc_coherent
  • From: Sabyasachi Gupta <sabyasachi.linux@xxxxxxxxx>
• [Bug 202859] Corruption when reading from disk with 32-core processor (megaraid_sas)
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202859] Corruption when reading from disk with 32-core processor (megaraid_sas)
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202859] Corruption when reading from disk with 32-core processor (megaraid_sas)
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202859] Corruption when reading from disk with 32-core processor (megaraid_sas)
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] mpt3sas: Fix kernel panic occurs during expander reset
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• RE: [PATCH] usb: uas: fix usb subsystem hang after power off hub port
  • From: <Kento.A.Kobayashi@xxxxxxxx>
• [Bug 202859] Corruption when reading from disk with 32-core processor (megaraid_sas)
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202859] Corruption when reading from disk with 32-core processor (megaraid_sas)
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202859] Corruption when reading from disk with 32-core processor
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202859] New: Corruption when reading from disk with 32-core processor
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] iscsi: fall back to sendmsg for slab pages
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [GIT PULL] first round of SCSI updates for the 5.0+ merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v2 07/14] qla2xxx: Cleanups for NVRAM/Flash read/write path
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 07/14] qla2xxx: Cleanups for NVRAM/Flash read/write path
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 08/14] qla2xxx: Add support for multiple fwdump templates/segments
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2 01/14] qla2xxx: Add fw_attr and port_no SysFS node
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 14/14] qla2xxx: Update driver version to 10.01.00.15-k
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 00/14] qla2xxx: Add support for ISP28XX (Gen7) adapter
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 09/14] qla2xxx: Update flash read/write routine
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 13/14] qla2xxx: Secure flash update support for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 12/14] qla2xxx: Add 28xx flash primary/secondary status/image mechanism
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 11/14] qla2xxx: Simplification of register address used in qla_tmpl.c
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 07/14] qla2xxx: Cleanups for NVRAM/Flash read/write path
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 10/14] qla2xxx: Correction and improvement to fwdt processing
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 08/14] qla2xxx: Add support for multiple fwdump templates/segments
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 05/14] qla2xxx: Add Serdes support for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 06/14] qla2xxx: Correctly report max/min supported speeds
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 03/14] qla2xxx: Fix routine qla27xx_dump_{mpi|ram}().
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 04/14] qla2xxx: Add Device ID for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2 02/14] qla2xxx: Remove FW default template
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH] scsi: gdth: Only call dma_free_coherent when buf is not NULL in ioc_general
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH v2] scsi: qla4xxx: Don't call dma_free_coherent when buf is NULL
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH] scsi: gdth: Only call dma_free_coherent when buf is not NULL in ioc_general
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH] scsi: iscsi: flush running unbind operations when removing a session
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH] usb: uas: fix usb subsystem hang after power off hub port
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: uas: fix usb subsystem hang after power off hub port
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• RE: [PATCH] scsi: aacraid: Fix performance issue(QD) on logical drives
  • From: <Dave.Carroll@xxxxxxxxxxxxx>
• Re: [PATCH] mpt3sas: Fix kernel panic occurs during expander reset
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 07/14] qla2xxx: Cleanups for NVRAM/Flash read/write path
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 09/14] qla2xxx: Update flash read/write routine
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] usb: uas: fix usb subsystem hang after power off hub port
  • From: <Kento.A.Kobayashi@xxxxxxxx>
• [PATCH 0/3] scsi: ufs: runtime pm fixes
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [PATCH 3/3] scsi: ufs: qcom: Remove unnecessary runtime pm calls
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [PATCH 2/3] scsi: ufs: Add error checks for pm_runtime_get_sync()
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [PATCH 1/3] scsi: ufs: Fix runtime pm handling in ufshcd-pltfrm
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [PATCH] scsi: reshuffle no_scsi2_lun_in_cdb for better alignment
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 08/14] qla2xxx: Add support for multiple fwdump templates/segments
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] scsi: aacraid: Fix performance issue(QD) on logical drives
  • From: <sagar.biradar@xxxxxxxxxxxxx>
• [PATCH 07/14] qla2xxx: Cleanups for NVRAM/Flash read/write path
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 09/14] qla2xxx: Update flash read/write routine
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 12/14] qla2xxx: Add 28xx flash primary/secondary status/image mechanism
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 14/14] qla2xxx: Update driver version to 10.01.00.15-k
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 13/14] qla2xxx: Secure flash update support for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 05/14] qla2xxx: Add Serdes support for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 04/14] qla2xxx: Add Device ID for ISP28XX
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 11/14] qla2xxx: Simplification of register address used in qla_tmpl.c
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 10/14] qla2xxx: Correction and improvement to fwdt processing
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 08/14] qla2xxx: Add support for multiple fwdump templates/segments
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 06/14] qla2xxx: Correctly report max/min supported speeds
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 02/14] qla2xxx: Remove FW default template
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 03/14] qla2xxx: Fix routine qla27xx_dump_{mpi|ram}().
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 01/14] qla2xxx: Add fw_attr and port_no SysFS node
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 00/14] qla2xxx: Add support for ISP28XX (Gen7) adapter
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH v2] scsi:libiscsi: Hold back_lock when calling iscsi_complete_task
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi:libiscsi: Hold back_lock when calling iscsi_complete_task
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH v2] scsi:libiscsi: Hold back_lock when calling iscsi_complete_task
  • From: Lee Duncan <lduncan@xxxxxxxx>
• [PATCH] scsi: gdth: Only call dma_free_coherent when buf is not NULL in ioc_general
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH v2] scsi: qla4xxx: Don't call dma_free_coherent when buf is NULL
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH] scsi/NCR5380: Remove set but unused variable
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• [PATCH] scsi/NCR5380: Avoid compiler warning when -Wimplicit-fallthrough is enabled
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH] libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [PATCH] scsi: qla4xxx: Don't call dma_free_coherent without dma_alloc_coherent
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH] scsi: qla4xxx: Don't call dma_free_coherent without dma_alloc_coherent
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH -next] scsi: libfc: Fix potential NULL pointer dereference
  • From: Hannes Reinecke <hare@xxxxxxx>
• [GIT PULL] first round of SCSI updates for the 5.0+ merge window
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3] scsi: sd: block: Fix regressions in read-only block device handling
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/6] hisi_sas: Some misc patches
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qla2xxx: check for kstrtol() failure
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 2/4] scsi: lpfc: fix 32-bit format string warning
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/4] scsi: lpfc: fix unused variable warning
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1] scsi: tcmu: Switch to bitmap_zalloc()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] iscsi: fall back to sendmsg for slab pages
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v2] drivers: scsi: Kconfig: pedantic formatting
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH v1] scsi: tcmu: Switch to bitmap_zalloc()
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• [PATCH] drivers: scsi: Kconfig: pedantic cleanups
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH v2] scsi:libiscsi: Hold back_lock when calling iscsi_complete_task
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH] iscsi: fall back to sendmsg for slab pages
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH 3/4] scsi: qla2xxx: avoid printf format warning
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1] scsi: tcmu: Switch to bitmap_zalloc()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] mpt3sas: Fix kernel panic occurs during expander reset
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] lpfc: resolve static checker warning in lpfc_sli4_hba_unset
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 4/4] scsi: ufs: hisi: fix ufs_hba_variant_ops passing
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fix panic in qla_dfs_tgt_counters_show
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V1] scsi: megaraid_sas: reduce module load time
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: NCR5380: Mark expected switch fall-through
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] tcmu: wait for nl reply only if there are listeners or during an add
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: virtio_scsi: don't send sc payload with tmfs
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3] scsi: smartpqi_init: Reporting 'logical unit failure'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 3/4] scsi: qla2xxx: avoid printf format warning
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH] iscsi: fall back to sendmsg for slab pages
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• RE: [PATCH 4/4] scsi: ufs: hisi: fix ufs_hba_variant_ops passing
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH] iscsi: fall back to sendmsg for slab pages
  • From: Vasily Averin <vvs@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• RE: [PATCH v3] scsi: smartpqi_init: Reporting 'logical unit failure'
  • From: <Don.Brace@xxxxxxxxxxxxx>
• [PATCH] qedf: fix itnull.cocci warnings
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH] scsi: target: add device product id and revision configfs attributes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1] scsi: tcmu: Switch to bitmap_zalloc()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] qla2xxx: Fix panic in qla_dfs_tgt_counters_show
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 24/26] qedf: Correctly handle refcounting of rdata.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 26/26] qedf: Update the driver version to 8.37.25.19.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 25/26] qedf: Fix lport may be used uninitialezed warning.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 23/26] qedf: Cleanup rrq_work after QEDF_CMD_OUTSTANDING is cleared.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 22/26] qedf: Check for tm_flags instead of cmd_type during cleanup.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 21/26] qedf: Add a flag to help debugging io_req which could not be cleaned.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 20/26] qedf: Don't send ABTS for under run scenario.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 19/26] qedf: Don't queue anything if upload is in progress.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 18/26] qedf: Check both the FCF and fabric ID before servicing clear virtual link.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 17/26] qedf: fc_rport_priv reference counting fixes
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 16/26] qedf: Add missing return in qedf_scsi_done().
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 15/26] qedf: Wait for upload and link down processing during soft ctx reset.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 14/26] qedf: Add additional checks for io_req->sc_cmd validity.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 13/26] qedf: fixup bit operations.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 00/26] qedf: Misc fixes for the driver.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 12/26] qedf: fixup locking in qedf_restart_rport()
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 11/26] qedf: missing kref_put in qedf_xmit()
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 10/26] qedf: Check for link state before processing LL2 packets and send fipvlan retries.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 09/26] qedf: Add missing fc_disc_init call after allocating lport.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 08/26] qedf: Correct the memory barriers in qedf_ring_doorbell.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 06/26] qedf: Modify abort and tmf handler to handle edge condition and flush.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 05/26] qedf: Modify flush routine to handle all I/Os and TMF.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 07/26] qedf: Use a separate completion for cleanup commands.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 04/26] qedf: Simplify s/g list mapping.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 03/26] qedf: Add missing return in qedf_post_io_req() in the fcport offload check.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 02/26] qedf: Correct xid range overlap between offloaded requests and libfc requests.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH 01/26] qedf: Do not retry ELS request if qedf_alloc_cmd fails.
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH V1] scsi: megaraid_sas: reduce module load time
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>