Re: [PATCH 7/9] scsi: hisi_sas_v3: convert private reply queue to blk-mq hw queue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 31, 2019 at 2:42 PM Hannes Reinecke <hare@xxxxxxx> wrote:
>
> On 5/31/19 8:34 AM, Ming Lei wrote:
> > On Fri, May 31, 2019 at 2:21 PM Hannes Reinecke <hare@xxxxxxx> wrote:
> >>
> >> On 5/31/19 4:27 AM, Ming Lei wrote:
> >>> SCSI's reply qeueue is very similar with blk-mq's hw queue, both
> >>> assigned by IRQ vector, so map te private reply queue into blk-mq's hw
> >>> queue via .host_tagset.
> >>>
> >>> Then the private reply mapping can be removed.
> >>>
> >>> Another benefit is that the request/irq lost issue may be solved in
> >>> generic approach because managed IRQ may be shutdown during CPU
> >>> hotplug.
> >>>
> >>> Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxx>
> >>> ---
> >>>  drivers/scsi/hisi_sas/hisi_sas.h       |  2 +-
> >>>  drivers/scsi/hisi_sas/hisi_sas_main.c  | 36 ++++++++++----------
> >>>  drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 46 +++++++++-----------------
> >>>  3 files changed, 36 insertions(+), 48 deletions(-)
> >>>
> >>> diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
> >>> index fc87994b5d73..3d48848dbde7 100644
> >>> --- a/drivers/scsi/hisi_sas/hisi_sas.h
> >>> +++ b/drivers/scsi/hisi_sas/hisi_sas.h
> >>> @@ -26,6 +26,7 @@
> >>>  #include <linux/platform_device.h>
> >>>  #include <linux/property.h>
> >>>  #include <linux/regmap.h>
> >>> +#include <linux/blk-mq-pci.h>
> >>>  #include <scsi/sas_ata.h>
> >>>  #include <scsi/libsas.h>
> >>>
> >>> @@ -378,7 +379,6 @@ struct hisi_hba {
> >>>       u32 intr_coal_count;    /* Interrupt count to coalesce */
> >>>
> >>>       int cq_nvecs;
> >>> -     unsigned int *reply_map;
> >>>
> >>>       /* debugfs memories */
> >>>       u32 *debugfs_global_reg;
> >>> diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
> >>> index 8a7feb8ed8d6..a1c1f30b9fdb 100644
> >>> --- a/drivers/scsi/hisi_sas/hisi_sas_main.c
> >>> +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
> >>> @@ -441,6 +441,19 @@ static int hisi_sas_dif_dma_map(struct hisi_hba *hisi_hba,
> >>>       return rc;
> >>>  }
> >>>
> >>> +static struct scsi_cmnd *sas_task_to_scsi_cmd(struct sas_task *task)
> >>> +{
> >>> +     if (!task->uldd_task)
> >>> +             return NULL;
> >>> +
> >>> +     if (dev_is_sata(task->dev)) {
> >>> +             struct ata_queued_cmd *qc = task->uldd_task;
> >>> +             return qc->scsicmd;
> >>> +     } else {
> >>> +             return task->uldd_task;
> >>> +     }
> >>> +}
> >>> +
> >>>  static int hisi_sas_task_prep(struct sas_task *task,
> >>>                             struct hisi_sas_dq **dq_pointer,
> >>>                             bool is_tmf, struct hisi_sas_tmf_task *tmf,
> >>> @@ -459,6 +472,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
> >>>       struct hisi_sas_dq *dq;
> >>>       unsigned long flags;
> >>>       int wr_q_index;
> >>> +     struct scsi_cmnd *scsi_cmnd;
> >>>
> >>>       if (DEV_IS_GONE(sas_dev)) {
> >>>               if (sas_dev)
> >>> @@ -471,9 +485,10 @@ static int hisi_sas_task_prep(struct sas_task *task,
> >>>               return -ECOMM;
> >>>       }
> >>>
> >>> -     if (hisi_hba->reply_map) {
> >>> -             int cpu = raw_smp_processor_id();
> >>> -             unsigned int dq_index = hisi_hba->reply_map[cpu];
> >>> +     scsi_cmnd = sas_task_to_scsi_cmd(task);
> >>> +     if (hisi_hba->shost->hostt->host_tagset) {
> >>> +             unsigned int dq_index = scsi_cmnd_hctx_index(
> >>> +                             hisi_hba->shost, scsi_cmnd);
> >>>
> >>>               *dq_pointer = dq = &hisi_hba->dq[dq_index];
> >>>       } else {
> >>> @@ -503,21 +518,8 @@ static int hisi_sas_task_prep(struct sas_task *task,
> >>>
> >>>       if (hisi_hba->hw->slot_index_alloc)
> >>>               rc = hisi_hba->hw->slot_index_alloc(hisi_hba, device);
> >>> -     else {
> >>> -             struct scsi_cmnd *scsi_cmnd = NULL;
> >>> -
> >>> -             if (task->uldd_task) {
> >>> -                     struct ata_queued_cmd *qc;
> >>> -
> >>> -                     if (dev_is_sata(device)) {
> >>> -                             qc = task->uldd_task;
> >>> -                             scsi_cmnd = qc->scsicmd;
> >>> -                     } else {
> >>> -                             scsi_cmnd = task->uldd_task;
> >>> -                     }
> >>> -             }
> >>> +     else
> >>>               rc  = hisi_sas_slot_index_alloc(hisi_hba, scsi_cmnd);
> >>> -     }
> >>>       if (rc < 0)
> >>>               goto err_out_dif_dma_unmap;
> >>>
> >>> diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> >>> index 49620c2411df..063e50e5b30c 100644
> >>> --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> >>> +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> >>> @@ -2344,30 +2344,6 @@ static irqreturn_t cq_interrupt_v3_hw(int irq_no, void *p)
> >>>       return IRQ_HANDLED;
> >>>  }
> >>>
> >>> -static void setup_reply_map_v3_hw(struct hisi_hba *hisi_hba, int nvecs)
> >>> -{
> >>> -     const struct cpumask *mask;
> >>> -     int queue, cpu;
> >>> -
> >>> -     for (queue = 0; queue < nvecs; queue++) {
> >>> -             struct hisi_sas_cq *cq = &hisi_hba->cq[queue];
> >>> -
> >>> -             mask = pci_irq_get_affinity(hisi_hba->pci_dev, queue +
> >>> -                                         BASE_VECTORS_V3_HW);
> >>> -             if (!mask)
> >>> -                     goto fallback;
> >>> -             cq->pci_irq_mask = mask;
> >>> -             for_each_cpu(cpu, mask)
> >>> -                     hisi_hba->reply_map[cpu] = queue;
> >>> -     }
> >>> -     return;
> >>> -
> >>> -fallback:
> >>> -     for_each_possible_cpu(cpu)
> >>> -             hisi_hba->reply_map[cpu] = cpu % hisi_hba->queue_count;
> >>> -     /* Don't clean all CQ masks */
> >>> -}
> >>> -
> >>>  static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
> >>>  {
> >>>       struct device *dev = hisi_hba->dev;
> >>> @@ -2383,11 +2359,6 @@ static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
> >>>
> >>>               min_msi = MIN_AFFINE_VECTORS_V3_HW;
> >>>
> >>> -             hisi_hba->reply_map = devm_kcalloc(dev, nr_cpu_ids,
> >>> -                                                sizeof(unsigned int),
> >>> -                                                GFP_KERNEL);
> >>> -             if (!hisi_hba->reply_map)
> >>> -                     return -ENOMEM;
> >>>               vectors = pci_alloc_irq_vectors_affinity(hisi_hba->pci_dev,
> >>>                                                        min_msi, max_msi,
> >>>                                                        PCI_IRQ_MSI |
> >>> @@ -2395,7 +2366,6 @@ static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
> >>>                                                        &desc);
> >>>               if (vectors < 0)
> >>>                       return -ENOENT;
> >>> -             setup_reply_map_v3_hw(hisi_hba, vectors - BASE_VECTORS_V3_HW);
> >>>       } else {
> >>>               min_msi = max_msi;
> >>>               vectors = pci_alloc_irq_vectors(hisi_hba->pci_dev, min_msi,
> >>> @@ -2896,6 +2866,18 @@ static void debugfs_snapshot_restore_v3_hw(struct hisi_hba *hisi_hba)
> >>>       clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
> >>>  }
> >>>
> >>> +static int hisi_sas_map_queues(struct Scsi_Host *shost)
> >>> +{
> >>> +     struct hisi_hba *hisi_hba = shost_priv(shost);
> >>> +     struct blk_mq_queue_map *qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT];
> >>> +
> >>> +     if (auto_affine_msi_experimental)
> >>> +             return blk_mq_pci_map_queues(qmap, hisi_hba->pci_dev,
> >>> +                             BASE_VECTORS_V3_HW);
> >>> +     else
> >>> +             return blk_mq_map_queues(qmap);
> >>> +}
> >>> +
> >>>  static struct scsi_host_template sht_v3_hw = {
> >>>       .name                   = DRV_NAME,
> >>>       .module                 = THIS_MODULE,
> >>
> >> As mentioned, we should be using a common function here.
> >>
> >>> @@ -2906,6 +2888,8 @@ static struct scsi_host_template sht_v3_hw = {
> >>>       .scan_start             = hisi_sas_scan_start,
> >>>       .change_queue_depth     = sas_change_queue_depth,
> >>>       .bios_param             = sas_bios_param,
> >>> +     .map_queues             = hisi_sas_map_queues,
> >>> +     .host_tagset            = 1,
> >>>       .this_id                = -1,
> >>>       .sg_tablesize           = HISI_SAS_SGE_PAGE_CNT,
> >>>       .sg_prot_tablesize      = HISI_SAS_SGE_PAGE_CNT,
> >>> @@ -3092,6 +3076,8 @@ hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> >>>       if (hisi_sas_debugfs_enable)
> >>>               hisi_sas_debugfs_init(hisi_hba);
> >>>
> >>> +     shost->nr_hw_queues = hisi_hba->cq_nvecs;
> >>> +
> >>>       rc = scsi_add_host(shost, dev);
> >>>       if (rc)
> >>>               goto err_out_ha;
> >>>
> >> Well, I'd rather see the v3 hardware converted to 'real' blk-mq first;
> >> the hardware itself is pretty much multiqueue already, so we should be
> >> better off converting it to blk-mq.
> >
> > From John Garry's input, the tags is still hostwide, then not sure how to
> > partition the hostwide tags into each hw queue's tags. That can be quite
> > hard to do if the queue depth isn't big enough.
> >
> Shouldn't be much of an issue; the conversion to blk-mq would still be
> using a host-wide tag map.

Could you explain a bit more? Because that is exactly what this patch is doing
(expose MQ on host-wide tag)


Thanks,
Ming Lei



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux