Linux RTC
[Prev Page][Next Page]
- Re: [PATCH v3 7/7] clocksource: mips-gic-timer: Set limitations on clocksource/sched-clocks usage
- Re: [PATCH v3 3/7] dt-bindings: interrupt-controller: Convert mti,gic to DT schema
- Re: [PATCH v3 2/7] dt-bindings: timer: Move snps,dw-apb-timer DT schema from rtc
- [PATCH 1/2] dt-bindings: rtc: Convert MXC RTC to json-schema
- [PATCH 2/2] dt-bindings: rtc: Convert MXC RTC V2 to json-schema
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- Re: [PATCH 2/2 v4] alpha: add a delay before serial port read
- Re: [PATCH v4] alpha: add a barrier after outb, outw and outl
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- Re: [PATCH 1/7] rtc: ingenic: Only support probing from devicetree
- Re: [PATCH 1/3] dt-bindings: mfd: Document the RTC present on MAX77620
- Re: [PATCH 3/3] rtc: max77686: Use single-byte writes on MAX77620
- Re: [PATCH v2] rtc: mc13xxx: fix a double-unlock issue
- Re: [PATCH] rtc: stmp3xxx: update contact email
- [PATCH v2] rtc: pcf2127: report battery switch over
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- RE: [PATCH 2/3] dts: ppc: t4240rdb: add uie_unsupported property to drop warning
- RE: [PATCH 1/3] rtc: ds1374: add uie_unsupported property to drop warning
- Re: [PATCH 2/3] dts: ppc: t4240rdb: add uie_unsupported property to drop warning
- Re: [PATCH 1/3] rtc: ds1374: add uie_unsupported property to drop warning
- Re: [PATCH 1/3] dt-bindings: mfd: Document the RTC present on MAX77620
- [PATCH 3/3] dts: ppc: t1024rdb: add wakeup-source property to drop warning
- [PATCH 1/3] rtc: ds1374: add uie_unsupported property to drop warning
- [PATCH 2/3] dts: ppc: t4240rdb: add uie_unsupported property to drop warning
- Re: [PATCH v4] alpha: add a barrier after outb, outw and outl
- [PATCH v4] alpha: add a barrier after outb, outw and outl
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- Re: [PATCH 2/2 v5] alpha: add a delay before serial port read
- Re: [PATCH 2/2 v5] alpha: add a delay before serial port read
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- [PATCH 2/2 v5] alpha: add a delay before serial port read
- Re: [PATCH 2/2 v4] alpha: add a delay before serial port read
- Re: [PATCH v3 2/7] dt-bindings: timer: Move snps,dw-apb-timer DT schema from rtc
- Re: [PATCH 2/2 v4] alpha: add a delay before serial port read
- [PATCH 2/2 v4] alpha: add a delay before serial port read
- [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- Re: [PATCH 2/2 v4] alpha: add a delay before serial port read
- Re: [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- [PATCH 2/2 v4] alpha: add a delay before serial port read
- [PATCH 1/2 v3] alpha: add a delay to inb_p, inb_w and inb_l
- [PATCH v3 3/7] dt-bindings: interrupt-controller: Convert mti,gic to DT schema
- [PATCH v3 5/7] clocksource: dw_apb_timer_of: Fix missing clockevent timers
- [PATCH v3 6/7] clocksource: mips-gic-timer: Register as sched_clock
- [PATCH v3 7/7] clocksource: mips-gic-timer: Set limitations on clocksource/sched-clocks usage
- [PATCH v3 4/7] clocksource: dw_apb_timer: Set clockevent any-possible-CPU mask
- [PATCH v3 2/7] dt-bindings: timer: Move snps,dw-apb-timer DT schema from rtc
- [PATCH v3 1/7] dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema
- [PATCH v3 0/7] clocksource: Fix MIPS GIC and DW APB Timer for Baikal-T1 SoC support
- Re: [PATCH 2/2 v3] alpha: add a delay before serial port read
- [PATCH 1/2 v2] alpha: add a delay to inb_p, inb_w and inb_l
- [PATCH 2/2 v3] alpha: add a delay before serial port read
- Re: [PATCH 2/2 v2] alpha: add a delay before serial port read
- Re: [PATCH 2/2 v2] alpha: add a delay before serial port read
- Re: [PATCH 2/2 v2] alpha: add a delay before serial port read
- [PATCH 2/2 v2] alpha: add a delay before serial port read
- Re: [PATCH 1/2] alpha: add a delay between RTC port write and read
- Re: [PATCH 2/2] alpha: add a delay before serial port read
- [PATCH 2/2] alpha: add a delay before serial port read
- [PATCH 1/2] alpha: add a delay between RTC port write and read
- Re: [PATCH -next] rtc: pcf8523: Use PTR_ERR_OR_ZERO() to simplify code
- [PATCH -next] rtc: pcf8523: Use PTR_ERR_OR_ZERO() to simplify code
- [PATCH 7/7] rtc: ingenic: Reset regulator register in probe
- [PATCH 6/7] rtc: ingenic: Fix masking of error code
- [PATCH 5/7] rtc: ingenic: Remove unused fields from private structure
- [PATCH 4/7] rtc: ingenic: Set wakeup params in probe
- [PATCH 3/7] rtc: ingenic: Enable clock in probe
- [PATCH 2/7] rtc: ingenic: Use local 'dev' variable in probe
- [PATCH 1/7] rtc: ingenic: Only support probing from devicetree
- Re: [PATCH 5/5] rtc: pcf2127: report battery switch over
- Re: [PATCH 5/5] rtc: pcf2127: report battery switch over
- [PATCH 5/5] rtc: pcf2127: report battery switch over
- [PATCH 4/5] rtc: pcf2127: set regmap max_register
- [PATCH 3/5] rtc: pcf2127: remove unnecessary #ifdef
- [PATCH 2/5] rtc: pcf2127: let the core handle rtc range
- [PATCH 1/5] rtc: add new VL flag for backup switchover
- [PATCH v2] rtc: mc13xxx: fix a double-unlock issue
- Re: [PATCH] rtc: mc13xxx: fix a double-unlock issue
- [PATCH] rtc: mc13xxx: fix a double-unlock issue
- [PATCH] rtc: stmp3xxx: update contact email
- Re: [PATCH 1/3] dt-bindings: mfd: Document the RTC present on MAX77620
- Re: [PATCH 1/3] dt-bindings: mfd: Document the RTC present on MAX77620
- Re: [PATCH 1/3] dt-bindings: mfd: Document the RTC present on MAX77620
- Re: [PATCH 1/3] dt-bindings: mfd: Document the RTC present on MAX77620
- [PATCH v13 4/6] mfd: Add support for the MediaTek MT6358 PMIC
- [PATCH v13 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- [PATCH v13 6/6] arm64: dts: mt6358: add PMIC MT6358 related nodes
- [PATCH v13 1/6] mfd: mt6397: Modify suspend/resume behavior
- [PATCH v13 0/6] Add Support for MediaTek PMIC MT6358
- [PATCH v13 3/6] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC
- [PATCH v13 2/6] mfd: mt6397: Trim probe function to support different chips more cleanly
- Re: [PATCH 3/3] rtc: max77686: Use single-byte writes on MAX77620
- Re: [PATCH 2/3] rtc: max77686: Make wakeup support configurable
- Re: [PATCH v12 1/6] mfd: mt6397: Modify suspend/resume behavior
- Re: [PATCH v12 1/6] mfd: mt6397: Modify suspend/resume behavior
- Re: [PATCH v12 1/6] mfd: mt6397: Modify suspend/resume behavior
- Re: [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- [PATCH 2/3] rtc: max77686: Make wakeup support configurable
- [PATCH 1/3] dt-bindings: mfd: Document the RTC present on MAX77620
- [PATCH 3/3] rtc: max77686: Use single-byte writes on MAX77620
- Re: [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- Re: [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v12 4/6] mfd: Add support for the MediaTek MT6358 PMIC
- Re: [PATCH v12 2/6] mfd: mt6397: Trim probe function to support different chips more cleanly
- Re: [PATCH v12 1/6] mfd: mt6397: Modify suspend/resume behavior
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- Re: [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a '$ref'
- [PATCH 1/2] dt-bindings: Clean-up schema indentation formatting
- [PATCH] rtc: 88pm860x: remove useless range check
- [PATCH 2/2] rtc: mt2712: switch to devm_platform_ioremap_resource
- [PATCH 1/2] rtc: mt2712: remove unnecessary error string
- Re: [PATCH 2/3] dt-bindings: rtc: add chargeable flag for rx8130
- Re: [PATCH 2/3] dt-bindings: rtc: add chargeable flag for rx8130
- [PATCH 3/3] rtc: ds1307: make backup battery chargeable optionally
- [PATCH 2/3] dt-bindings: rtc: add chargeable flag for rx8130
- [RESEND PATCH v2 1/3] rtc: ds1307: Enable battery backup on RX8130
- [PATCH AUTOSEL 5.6 033/129] rtc: 88pm860x: fix possible race condition
- [PATCH AUTOSEL 5.5 025/106] rtc: 88pm860x: fix possible race condition
- [PATCH AUTOSEL 5.4 16/84] rtc: 88pm860x: fix possible race condition
- [PATCH AUTOSEL 4.19 05/40] rtc: 88pm860x: fix possible race condition
- [PATCH AUTOSEL 4.14 05/30] rtc: 88pm860x: fix possible race condition
- Re: [PATCH] rtc: rc5t619: Fix an ERR_PTR vs NULL check
- Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt
- Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt
- Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt
- Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt
- Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt
- Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt
- Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt
- Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt
- Re: [PATCH 5/5] rtc: at91sam9: add microchip,sam9x60-rtt
- Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt
- Re: [PATCH 5/5] rtc: at91sam9: add microchip,sam9x60-rtt
- [PATCH AUTOSEL 5.6 138/149] rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()
- [PATCH AUTOSEL 5.6 148/149] rtc: imx-sc: Align imx sc msg structs to 4
- [PATCH AUTOSEL 5.5 112/121] rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()
- [PATCH AUTOSEL 5.5 120/121] rtc: imx-sc: Align imx sc msg structs to 4
- [PATCH AUTOSEL 5.4 107/108] rtc: imx-sc: Align imx sc msg structs to 4
- [PATCH AUTOSEL 4.19 61/66] rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()
- [PATCH AUTOSEL 5.4 099/108] rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()
- Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt
- Re: [PATCH 5/5] rtc: at91sam9: add microchip,sam9x60-rtt
- [PATCH 5/5] rtc: at91sam9: add microchip,sam9x60-rtt
- [PATCH 0/5] add RTT support for SAM9X60
- [PATCH 4/5] ARM: dts: sam9x60: add rtt
- [PATCH 3/5] ARM: dts: sam9x60ek: enable gpbr
- [PATCH 1/5] irqchip/atmel-aic5: add support for sam9x60 rtt fixup
- [PATCH 2/5] rtc: at91sam9: enable driver for sam9x60
- [PATCH v12 2/6] mfd: mt6397: Trim probe function to support different chips more cleanly
- [PATCH v12 3/6] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC
- [PATCH v12 0/6] Add Support for MediaTek PMIC MT6358
- [PATCH v12 4/6] mfd: Add support for the MediaTek MT6358 PMIC
- [PATCH v12 5/6] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- [PATCH v12 6/6] arm64: dts: mt6358: add PMIC MT6358 related nodes
- [PATCH v12 1/6] mfd: mt6397: Modify suspend/resume behavior
- [PATCH] rtc: rc5t619: Fix an ERR_PTR vs NULL check
- Re: [PATCH v11 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH] rtc: Delete an error message in three functions
- [PATCH] rtc: Delete an error message in three functions
- Re: [PATCH v11 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [GIT PULL] RTC for 5.7
- [GIT PULL] RTC for 5.7
- Re: [PATCH][next][V3] rtc: ds1307: check for failed memory allocation on wdt
- [PATCH][next][V3] rtc: ds1307: check for failed memory allocation on wdt
- Re: [PATCH][V2][next] rtc: ds1307: check for failed memory allocation on wdt
- Re: [PATCH][V2][next] rtc: ds1307: check for failed memory allocation on wdt
- Re: [PATCH][V2][next] rtc: ds1307: check for failed memory allocation on wdt
- Re: [PATCH][next] rtc: ds1307: check for failed memory allocation on wdt
- Re: [PATCH][V2][next] rtc: ds1307: check for failed memory allocation on wdt
- Re: [PATCH][next] rtc: class: remove redundant assignment to variable err
- Re: [PATCH][V2][next] rtc: ds1307: check for failed memory allocation on wdt
- Re: [PATCH][V2][next] rtc: ds1307: check for failed memory allocation on wdt
- Re: [PATCH][V2][next] rtc: ds1307: check for failed memory allocation on wdt
- Re: [PATCH 1/2] rtc: sun6i: let the core handle rtc range
- Re: [PATCH 2/2] rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH][V2][next] rtc: ds1307: check for failed memory allocation on wdt
- Re: [PATCH][next] rtc: ds1307: check for failed memory allocation on wdt
- AW: [PATCH][next] rtc: ds1307: check for failed memory allocation on wdt
- [PATCH][next] rtc: ds1307: check for failed memory allocation on wdt
- [PATCH][next] rtc: class: remove redundant assignment to variable err
- Re: [PATCH v2 2/6] dt-bindings: interrupt-controller: Convert mti,gic to DT schema
- Re: [PATCH v2 2/6] dt-bindings: interrupt-controller: Convert mti,gic to DT schema
- RE: [PATCH v2] rtc: da9052: convert to devm_rtc_allocate_device
- Re: [PATCH v2 2/6] dt-bindings: interrupt-controller: Convert mti,gic to DT schema
- Re: [PATCH v10 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- Re: [PATCH v10 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- Re: [PATCH v2 2/6] dt-bindings: interrupt-controller: Convert mti,gic to DT schema
- Re: [PATCH v2 1/6] dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema
- Re: [PATCH v11 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- Re: [PATCH v11 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v11 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v11 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- [PATCH v11 0/5] Add Support for MediaTek PMIC MT6358
- [PATCH v11 1/5] mfd: mt6397: modify suspend/resume behavior
- [PATCH v11 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- [PATCH v11 2/5] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC
- [PATCH v11 5/5] arm64: dts: mt6358: add PMIC MT6358 related nodes
- [PATCH v11 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH 1/2] rtc: sun6i: let the core handle rtc range
- [PATCH 2/2] rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 1/2] rtc: sun6i: let the core handle rtc range
- [PATCH] rtc: remove rtc_time_to_tm and rtc_tm_to_time
- [PATCH 2/2] rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 1/2] rtc: sun6i: let the core handle rtc range
- Re: [PATCH v3] rtc: ds1307: add support for watchdog timer on ds1388
- Re: rtc: fsl-ftm-alarm: add shutdown interface
- Re: [PATCH v3] rtc: ds1307: add support for watchdog timer on ds1388
- rtc: fsl-ftm-alarm: add shutdown interface
- [PATCH v3] rtc: ds1307: add support for watchdog timer on ds1388
- [PATCH v2] rtc: da9052: convert to devm_rtc_allocate_device
- Re: [PATCH] rtc: flextimer: report interrupt state to user mode
- Re: [PATCH v2] rtc: ds1307: add support for watchdog timer on ds1388
- Re: [PATCH 28/28] dt-bindings: usb: Convert ehci-mv to json-schema
- Re: [PATCH 27/28] dt-bindings: timer: Convert mrvl,mmp-timer to json-schema
- Re: [PATCH 26/28] dt-bindings: spi: Convert spi-pxa2xx to json-schema
- Re: [PATCH 25/28] dt-bindings: rtc: Convert sa1100-rtc to json-schema
- Re: [PATCH 24/28] dt-bindings: media: Convert marvell,mmp2-ccic to json-schema
- Re: [PATCH 23/28] dt-bindings: interrupt-controller: Convert mrvl,intc to json-schema
- Re: [PATCH 21/28] dt-bindings: gpio: Convert mrvl-gpio to json-schema
- Re: [PATCH 21/28] dt-bindings: gpio: Convert mrvl-gpio to json-schema
- Re: [PATCH 20/28] dt-bindings: phy: Convert phy-mmp3-usb to json-schema
- Re: [PATCH 17/28] dt-bindings: mmc: Fix up clk-phase-sd-hs in an example
- Re: [PATCH 16/28] dt-bindings: Add "mrvl", a legacy vendor prefix for Marvell
- Re: [PATCH 15/28] dt-bindings: arm: mrvl: Add missing compatible strings
- Re: [PATCH 14/28] dt-bindings: arm: l2x0: Tauros 3 is PL310 compatible
- Re: [PATCH 14/28] dt-bindings: arm: l2x0: Tauros 3 is PL310 compatible
- [GIT PULL] Immutable branch between MFD, IIO and RTC due for the v5.7 merge window
- Re: [PATCH 21/28] dt-bindings: gpio: Convert mrvl-gpio to json-schema
- [PATCH] rtc: flextimer: report interrupt state to user mode
- [PATCH v2] rtc: ds1307: add support for watchdog timer on ds1388
- Re: [PATCH] rtc: make definitions in include/uapi/linux/rtc.h actually useful for user space
- Re: [PATCH 18/28] dt-bindings: mmc: Fix node name in an example
- Re: [PATCH v10 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- RE: [PATCH -next] rtc: fsl-ftm-alarm: remove set but not used variable 'np'
- Re: [PATCH v2 1/6] dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema
- Re: [PATCH v2 1/6] dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema
- [PATCH v2 2/6] dt-bindings: interrupt-controller: Convert mti,gic to DT schema
- [PATCH v2 1/6] dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema
- [PATCH v2 0/6] clocksource: Fix MIPS GIC and DW APB Timer for Baikal-T1 SoC support
- Re: [PATCH v7 7/7] mfd: rn5t618: cleanup i2c_device_id
- Re: [PATCH v7 4/7] mfd: rn5t618: add more subdevices
- Re: [PATCH v7 2/7] mfd: rn5t618: add IRQ support
- Re: [PATCH v2 3/3] dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
- Re: [PATCH v2 2/3] rtc: jz4740: Rename vendor-specific DT properties
- Re: [PATCH v2 1/3] rtc: jz4740: Add support for JZ4760 SoC
- Re: [PATCH] rtc: Kconfig: change the tristate type to bool
- [PATCH -next] rtc: fsl-ftm-alarm: remove set but not used variable 'np'
- [PATCH] rtc: make definitions in include/uapi/linux/rtc.h actually useful for user space
- From: Eugene Syromiatnikov
- Re: [PATCH v2 3/3] dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
- [PATCH] rtc: class: avoid unnecessary lookup in hctosys
- Re: [PATCH] rtc: class: support hctosys from modular RTC drivers
- [PATCH RESEND -next] rtc: remove set but not used variable 'np'
- [PATCH -next] rtc: remove set but not used variable 'np'
- Re: [PATCH] rtc: Kconfig: change the tristate type to bool
- [PATCH] rtc: Kconfig: change the tristate type to bool
- Re:Re: [PATCH] rtc: pm8xxx: clear alarm register when alarm is not enabled
- RE: [EXT] Re: [PATCH] rtc: fsl-ftm-alarm: remove the useless variable
- Re: [PATCH] rtc: fsl-ftm-alarm: remove the useless variable
- [PATCH] rtc: fsl-ftm-alarm: remove the useless variable
- [PATCH] rtc-pm8xxx: Clear Alarm register on resume
- RE: [EXT] Re: [PATCH] rtc: fsl-ftm-alarm: enable acpi support
- Re: [PATCH] rtc: pm8xxx: clear alarm register when alarm is not enabled
- Re: [PATCH] rtc-pm8xxx: Clear Alarm register on resume
- Re: [PATCH] rtc: omap: drop unused dt-bindings header
- Re: [PATCH] rtc: bd70528: Avoid double error messaging when IRQ absent
- Re: [PATCH] rtc: max8907: add missing select REGMAP_IRQ
- Re: [PATCH] rtc: fsl-ftm-alarm: enable acpi support
- Re: [PATCH] rtc: mxc: Use devm_add_action_or_reset() for calls to clk_disable_unprepare()
- Re: [PATCH v1 2/2] rtc: ds1307: add support for watchdog timer on ds1388
- Re: [PATCH v1 1/2] rtc: ds1307: handle oscillator failure flags for ds1388 variant
- [PATCH] rtc: omap: drop unused dt-bindings header
- [PATCH] rtc: bd70528: Avoid double error messaging when IRQ absent
- Re:Re: [PATCH] rtc: pm8xxx: clear alarm register when alarm is not enabled
- Re: [PATCH] rtc: pm8xxx: clear alarm register when alarm is not enabled
- [PATCH] rtc: pm8xxx: clear alarm register when alarm is not enabled
- Re: [PATCH 05/28] ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
- Re: [PATCH] rtc: max8907: add missing select REGMAP_IRQ
- Re: [PATCH 13/28] dt-bindings: serial: move Marvell compatible string to 8250 binding doc
- [PATCH v7 1/7] dt-bindings: mfd: rn5t618: Document optional property interrupts
- [PATCH v7 2/7] mfd: rn5t618: add IRQ support
- [PATCH v7 6/7] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
- [PATCH v7 5/7] rtc: rc5t619: add Ricoh RC5T619 RTC driver
- [PATCH v7 3/7] mfd: rn5t618: add RTC related registers
- [PATCH v7 7/7] mfd: rn5t618: cleanup i2c_device_id
- [PATCH v7 0/7] mfd: rn5t618: Add RTC/ADC support
- [PATCH v7 4/7] mfd: rn5t618: add more subdevices
- Re: [PATCH RESEND v6 2/7] mfd: rn5t618: add IRQ support
- Re: [PATCH RESEND v6 2/7] mfd: rn5t618: add IRQ support
- Re: [PATCH 12/28] spi: dt-bindings: spi-controller: Slaves have no address cells
- Re: [PATCH 13/28] dt-bindings: serial: move Marvell compatible string to 8250 binding doc
- Re: [PATCH RESEND v6 2/7] mfd: rn5t618: add IRQ support
- Re: [PATCH 13/28] dt-bindings: serial: move Marvell compatible string to 8250 binding doc
- Re: [PATCH 19/28] dt-bindings: mmc: Convert sdhci-pxa to json-schema
- Re: [PATCH 19/28] dt-bindings: mmc: Convert sdhci-pxa to json-schema
- [PATCH] rtc: max8907: add missing select REGMAP_IRQ
- RE: [PATCH] rtc-pm8xxx: Clear Alarm register on resume
- [PATCH] rtc-pm8xxx: Clear Alarm register on resume
- Re: [PATCH 1/2] PNP: constify driver name
- [PATCH] rtc: fsl-ftm-alarm: enable acpi support
- Re: [PATCH 13/28] dt-bindings: serial: move Marvell compatible string to 8250 binding doc
- Re: [PATCH 1/2] PNP: constify driver name
- [PATCH v2] rtc: mt2712: fix build without PM_SLEEP
- Re: [PATCH 00/28] DT: Improve validation for Marvell SoCs
- Re: [PATCH 00/28] DT: Improve validation for Marvell SoCs
- Re: [PATCH 15/28] dt-bindings: arm: mrvl: Add missing compatible strings
- Re: [PATCH 13/28] dt-bindings: serial: move Marvell compatible string to 8250 binding doc
- Re: [PATCH 00/28] DT: Improve validation for Marvell SoCs
- Re: [PATCH 11/28] ARM: dts: berlin*: Fix up the SDHCI node names
- Re: [PATCH 10/28] ARM: dts: mmp3: fix USB & USB PHY node names
- Re: [PATCH 09/28] ARM: dts: mmp3: fix L2 cache controller node name
- Re: [PATCH 08/28] ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
- Re: [PATCH 08/28] ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
- Re: [PATCH 07/28] ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property
- Re: [PATCH 06/28] ARM: dts: pxa910: Fix the gpio interrupt cell number
- Re: [PATCH 05/28] ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
- Re: [PATCH 04/28] ARM: dts: pxa168: Fix the gpio interrupt cell number
- Re: [PATCH 03/28] ARM: dts: pxa168: Add missing address/size cells to i2c nodes
- Re: [PATCH 02/28] ARM: dts: dove: Fix interrupt controller node name
- Re: [PATCH 01/28] ARM: dts: kirkwood: Fix interrupt controller node name
- Re: [PATCH 00/28] DT: Improve validation for Marvell SoCs
- Re: [PATCH 1/2] rtc: mt2712: fix build without PM_SLEEP
- Re: [PATCH 1/2] rtc: mt2712: fix build without PM_SLEEP
- Re: [PATCH] rtc-pm8xxx: Clear Alarm register on resume
- Re: [PATCH 17/28] dt-bindings: mmc: Fix up clk-phase-sd-hs in an example
- [PATCH 02/28] ARM: dts: dove: Fix interrupt controller node name
- [PATCH 06/28] ARM: dts: pxa910: Fix the gpio interrupt cell number
- [PATCH 08/28] ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
- [PATCH 05/28] ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
- [PATCH 10/28] ARM: dts: mmp3: fix USB & USB PHY node names
- [PATCH 11/28] ARM: dts: berlin*: Fix up the SDHCI node names
- [PATCH 12/28] spi: dt-bindings: spi-controller: Slaves have no address cells
- [PATCH 13/28] dt-bindings: serial: move Marvell compatible string to 8250 binding doc
- [PATCH 14/28] dt-bindings: arm: l2x0: Tauros 3 is PL310 compatible
- [PATCH 15/28] dt-bindings: arm: mrvl: Add missing compatible strings
- [PATCH 16/28] dt-bindings: Add "mrvl", a legacy vendor prefix for Marvell
- [PATCH 28/28] dt-bindings: usb: Convert ehci-mv to json-schema
- [PATCH 27/28] dt-bindings: timer: Convert mrvl,mmp-timer to json-schema
- [PATCH 26/28] dt-bindings: spi: Convert spi-pxa2xx to json-schema
- [PATCH 25/28] dt-bindings: rtc: Convert sa1100-rtc to json-schema
- [PATCH 24/28] dt-bindings: media: Convert marvell,mmp2-ccic to json-schema
- [PATCH 23/28] dt-bindings: interrupt-controller: Convert mrvl,intc to json-schema
- [PATCH 22/28] dt-bindings: i2c: Convert i2c-pxa to json-schema
- [PATCH 21/28] dt-bindings: gpio: Convert mrvl-gpio to json-schema
- [PATCH 19/28] dt-bindings: mmc: Convert sdhci-pxa to json-schema
- [PATCH 18/28] dt-bindings: mmc: Fix node name in an example
- [PATCH 20/28] dt-bindings: phy: Convert phy-mmp3-usb to json-schema
- [PATCH 17/28] dt-bindings: mmc: Fix up clk-phase-sd-hs in an example
- [PATCH 09/28] ARM: dts: mmp3: fix L2 cache controller node name
- [PATCH 07/28] ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property
- [PATCH 04/28] ARM: dts: pxa168: Fix the gpio interrupt cell number
- [PATCH 03/28] ARM: dts: pxa168: Add missing address/size cells to i2c nodes
- [PATCH 01/28] ARM: dts: kirkwood: Fix interrupt controller node name
- [PATCH 00/28] DT: Improve validation for Marvell SoCs
- [PATCH] rtc-pm8xxx: Clear Alarm register on resume
- RE: [PATCH] rtc-pm8xxx: Clear Alarm register on resume
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH 1/2] rtc: mt2712: fix build without PM_SLEEP
- From: Russell King - ARM Linux admin
- [PATCH 2/2] rtc: mt2712: remove unused variable
- [PATCH 1/2] rtc: mt2712: fix build without PM_SLEEP
- Re: [PATCH] rtc-pm8xxx: Clear Alarm register on resume
- [PATCH] rtc: 88pm860x: remove platform data support
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- [PATCH] rtc: mxc: Use devm_add_action_or_reset() for calls to clk_disable_unprepare()
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- RE: [PATCH v2 1/8] clk: imx: Align imx sc clock msg structs to 4
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- [PATCH] rtc-pm8xxx: Clear Alarm register on resume
- Re: [PATCH V3 2/7] firmware: imx: add COMPILE_TEST support
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 2/7] firmware: imx: add COMPILE_TEST support
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH v2 1/8] clk: imx: Align imx sc clock msg structs to 4
- Re: [PATCH v3 3/4] arm64: dts: add RTC nodes for MT2712
- Re: [PATCH] rtc: snvs: remove redundant error message
- Re: [PATCH v3 0/4] Add Support for MediaTek MT2712 RTC
- Re: [PATCH] rtc: snvs: Use devm_add_action_or_reset() for calls to clk_disable_unprepare()
- [PATCH] rtc: snvs: remove redundant error message
- [PATCH] rtc: snvs: Use devm_add_action_or_reset() for calls to clk_disable_unprepare()
- Re: [PATCH v10 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v10 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v10 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- [PATCH RESEND v6 3/7] mfd: rn5t618: add RTC related registers
- [PATCH RESEND v6 5/7] rtc: rc5t619: add Ricoh RC5T619 RTC driver
- [PATCH RESEND v6 2/7] mfd: rn5t618: add IRQ support
- [PATCH RESEND v6 1/7] dt-bindings: mfd: rn5t618: Document optional property interrupts
- [PATCH RESEND v6 7/7] mfd: rn5t618: cleanup i2c_device_id
- [PATCH RESEND v6 0/7] mfd: rn5t618: Add RTC/ADC support
- [PATCH RESEND v6 6/7] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
- [PATCH RESEND v6 4/7] mfd: rn5t618: add more subdevices
- Re: [PATCH] rtc: m48t35: remove SGI-IP27 kludge
- Re: [PATCH v2 1/2] rtc: sun6i: Make external 32k oscillator optional
- RE: [PATCH 3/3] rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64
- RE: [PATCH 2/3] rtc: da9052: set range
- RE: [PATCH 1/3] rtc: da9052: convert to devm_rtc_allocate_device
- Re: [PATCH v10 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v10 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v10 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v10 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- [PATCH 4/6] rtc: 88pm860x: set range
- [PATCH 6/6] rtc: 88pm860x: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 5/6] rtc: 88pm860x: stop mangling alarm time
- [PATCH 2/6] rtc: 88pm860x: stop setting a default time
- [PATCH 3/6] rtc: 88pm860x: stop calling unused callback
- [PATCH 1/6] rtc: 88pm860x: fix possible race condition
- Re: [PATCH v10 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- [PATCH v2 3/3] dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
- [PATCH v2 2/3] rtc: jz4740: Rename vendor-specific DT properties
- [PATCH v2 1/3] rtc: jz4740: Add support for JZ4760 SoC
- [PATCH v10 5/5] arm64: dts: mt6358: add PMIC MT6358 related nodes
- [PATCH v10 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- [PATCH v10 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- [PATCH v10 2/5] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC
- [PATCH v10 0/5] Add Support for MediaTek PMIC MT6358
- [PATCH v10 1/5] mfd: mt6397: modify suspend/resume behavior
- Re: [PATCH v9 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- Re: [PATCH v9 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v9 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- Re: [PATCH v1 0/2] rtc: update ds1388 support
- Re: [PATCH 3/3] dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
- [PATCH v9 1/5] mfd: mt6397: modify suspend/resume behavior
- [PATCH v9 0/5] Add Support for MediaTek PMIC MT6358
- [PATCH v9 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- [PATCH v9 5/5] arm64: dts: mt6358: add PMIC MT6358 related nodes
- [PATCH v9 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- [PATCH v9 2/5] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH v2 2/2] arm64: dts: allwinner: h6: Move ext. oscillator to board DTs
- Re: [PATCH v2 1/2] rtc: sun6i: Make external 32k oscillator optional
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- [PATCH] rtc: m48t35: remove SGI-IP27 kludge
- From: Thomas Bogendoerfer
- RE: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH] rtc: ab8500: switch to rtc_time64_to_tm/rtc_tm_to_time64
- Re: [PATCH 3/3] rtc: pl031: switch to rtc_time64_to_tm/rtc_tm_to_time64
- Re: [PATCH 2/3] rtc: pl031: set range
- Re: [PATCH v8 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- [PATCH V3 7/7] thermal: add COMPILE_TEST support for IMX_SC_THERMAL
- RE: [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- [PATCH V3 6/7] watchdog: add COMPILE_TEST support for IMX_SC_WDT
- [PATCH V3 3/7] rtc: add COMPILE_TEST support for i.MX SC RTC
- [PATCH V3 5/7] input: keyboard: imx_sc_key: Fix build warning for !CONFIG_IMX_SCU case
- [PATCH V3 4/7] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- [PATCH V3 2/7] firmware: imx: add COMPILE_TEST support
- [PATCH V3 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- Re: [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- [PATCH v2 2/2] arm64: dts: allwinner: h6: Move ext. oscillator to board DTs
- [PATCH v2 1/2] rtc: sun6i: Make external 32k oscillator optional
- [PATCH v2 0/2] rtc: sun6i: Make external oscillator optional
- RE: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- Re: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- RE: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- [PATCH V2 6/7] watchdog: add COMPILE_TEST support for IMX_SC_WDT
- [PATCH V2 7/7] thermal: add COMPILE_TEST support for IMX_SC_THERMAL
- [PATCH V2 5/7] input: keyboard: imx_sc_key: Fix build warning for !CONFIG_IMX_SCU case
- [PATCH V2 4/7] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- [PATCH V2 3/7] rtc: add COMPILE_TEST support for i.MX SC RTC
- [PATCH V2 2/7] firmware: imx: add COMPILE_TEST support
- [PATCH V2 1/7] firmware: imx: Add stubs for !CONFIG_IMX_SCU case
- RE: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- Re: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- RE: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- Re: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- Re: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- Re: [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- Re: [PATCH 5/5] thermal: add COMPILE_TEST support for IMX_SC_THERMAL
- [PATCH 5/5] thermal: add COMPILE_TEST support for IMX_SC_THERMAL
- [PATCH 3/5] input: keyboard: add COMPILE_TEST support for KEYBOARD_IMX_SC_KEY
- [PATCH 2/5] rtc: add COMPILE_TEST support for i.MX SC RTC
- [PATCH 1/5] firmware: imx: add COMPILE_TEST support
- [PATCH 4/5] watchdog: add COMPILE_TEST support for IMX_SC_WDT
- Re: [PATCH 1/3] rtc: pl031: remove useless invalid alarm handling
- [PATCH RESEND] rtc: fsl-ftm-alarm: allow COMPILE_TEST
- [PATCH 2/2] rtc: cmos: remove useless cast for driver_name
- [PATCH 1/2] PNP: constify driver name
- [PATCH 3/4] rtc: mpc5121: set range
- [PATCH 4/4] rtc: mpc5121: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 2/4] rtc: mpc5121: convert to devm_rtc_allocate_device
- [PATCH 1/4] rtc: mpc5121: simplify probe
- [PATCH 3/4] rtc: pm8xxx: : switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 4/4] rtc: pm8xxx: stop validating valid alarm time
- [PATCH 2/4] rtc: pm8xxx: set range
- [PATCH 1/4] rtc: pm8xxx: convert to devm_rtc_allocate_device
- [PATCH 3/3] rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 2/3] rtc: da9052: set range
- [PATCH 1/3] rtc: da9052: convert to devm_rtc_allocate_device
- [PATCH 1/3] rtc: da9052: convert to devm_rtc_allocate_device
- [PATCH 2/2] rtc: ds1305: switch to rtc_tm_to_time64
- [PATCH 1/2] rtc: ds1305: set range
- [PATCH 3/3] rtc: ds1374: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 2/3] rtc: ds1374: set range
- [PATCH 1/3] rtc: ds1374: fix possible race condition
- [PATCH 3/3] rtc: cpcap: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 2/3] rtc: cpcap: set range
- [PATCH 1/3] rtc: cpcap: convert to devm_rtc_allocate_device
- [PATCH 2/2] rtc: puv3: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 1/2] rtc: puv3: set range
- [PATCH 2/3] rtc: sa1100: set range
- [PATCH 3/3] rtc: sa1100: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 1/3] rtc: sa1100: fix possible race condition
- [PATCH] rtc: ab8500: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 4/4] rtc: au1xxx: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 3/4] rtc: au1xxx: set range
- [PATCH 2/4] rtc: au1xxx: remove goto label
- [PATCH 1/4] rtc: au1xxx: convert to devm_rtc_allocate_device
- [PATCH 2/2] rtc: starfire: switch to rtc_time64_to_tm
- [PATCH 1/2] rtc: starfire: set range
- [PATCH 3/3] rtc: pl031: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 2/3] rtc: pl031: set range
- [PATCH 1/3] rtc: pl031: remove useless invalid alarm handling
- [PATCH 3/3] rtc: pl030: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 2/3] rtc: pl030: remove useless invalid alarm handling
- [PATCH 1/3] rtc: pl030: set range
- [PATCH 3/4] rtc: davinci: let the core handle rtc range
- [PATCH 4/4] rtc: davinci: remove useless error handling
- [PATCH 2/4] rtc: davinci: remove useless 24h alarm handling
- [PATCH 1/4] rtc: davinci: convert to devm_rtc_allocate_device
- [PATCH 3/3] rtc: sirfsoc: switch to rtc_time64_to_tm/rtc_tm_to_time64
- [PATCH 2/3] rtc: sirfsoc: set range
- [PATCH 1/3] rtc: sirfsoc: convert to devm_rtc_allocate_device
- Re: [PATCH v8 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v8 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- Re: [PATCH] RTC: use kobj_to_dev
- Re: [PATCH] rtc: snvs: Improve Kconfig dependency
- Re: [PATCH v2 7/8] rtc: imx-sc: Align imx sc msg structs to 4
- Re: [PATCH] rtc/cmos: Protect rtc_lock from interrupts
- Re: [PATCH] rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()
- [PATCH 3/3] dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
- [PATCH 2/3] rtc: jz4740: Rename vendor-specific DT properties
- [PATCH 1/3] rtc: jz4740: Add support for JZ4760 SoC
- [PATCH] rtc/cmos: Protect rtc_lock from interrupts
- [PATCH] rtc: snvs: Improve Kconfig dependency
- [PATCH v6 1/7] dt-bindings: mfd: rn5t618: Document optional property interrupts
- [PATCH v6 2/7] mfd: rn5t618: add IRQ support
- [PATCH v6 5/7] rtc: rc5t619: add Ricoh RC5T619 RTC driver
- [PATCH v6 6/7] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
- [PATCH v6 3/7] mfd: rn5t618: add RTC related registers
- [PATCH v6 0/7] mfd: rn5t618: Add RTC/ADC support
- [PATCH v6 4/7] mfd: rn5t618: add more subdevices
- [PATCH v6 7/7] mfd: rn5t618: cleanup i2c_device_id
- Re: [PATCH] rtc: zynqmp: Add calibration set and get support
- [PATCH 2/2] rtc/alpha: remove legacy rtc driver
- [PATCH RESEND 1/2] rtc/ia64: remove legacy efirtc driver
- [PATCH RESEND v5 5/5] rtc: rc5t619: add Ricoh RC5T619 RTC driver
- [PATCH RESEND v5 4/5] mfd: rn5t618: add more subdevices
- [PATCH RESEND v5 3/5] mfd: rn5t618: add RTC related registers
- [PATCH RESEND v5 0/5] Add rtc support for rn5t618 mfd
- [PATCH RESEND v5 2/5] mfd: rn5t618: add IRQ support
- [PATCH RESEND v5 1/5] dt-bindings: mfd: rn5t618: Document optional property interrupts
- Re: [PATCH v5 0/5] Add rtc support for rn5t618 mfd
- Re: [PATCH v10 00/13] Support ROHM BD71828 PMIC
- Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
- Re: [PATCH v5 0/5] Add rtc support for rn5t618 mfd
- From: H. Nikolaus Schaller
- [PATCH v3 3/4] arm64: dts: add RTC nodes for MT2712
- [PATCH v3 0/4] Add Support for MediaTek MT2712 RTC
- [PATCH v3 2/4] rtc: add support for the MediaTek MT2712 RTC
- [PATCH v3 4/4] MAINTAINERS: add MT2712 RTC files
- [PATCH v3 1/4] bindings: rtc: add bindings for MT2712 RTC
- Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
- Re: [PATCH v2 1/8] clk: imx: Align imx sc clock msg structs to 4
- Re: [PATCH v2 1/8] clk: imx: Align imx sc clock msg structs to 4
- [PATCH] RTC: use kobj_to_dev
- Re: [PATCH] rtc: zynqmp: Add calibration set and get support
- Re: [PATCH] rtc: zynqmp: Add calibration set and get support
- Re: [PATCH v2 8/8] soc: imx-scu: Align imx sc msg structs to 4
- Re: [PATCH v2 5/8] firmware: imx: Align imx_sc_msg_req_cpu_start to 4
- Re: [PATCH v2 4/8] firmware: imx: scu-pd: Align imx sc msg structs to 4
- Re: [PATCH v2 3/8] firmware: imx: misc: Align imx sc msg structs to 4
- Re: [PATCH v2 2/8] clk: imx: Align imx sc clock parent msg structs to 4
- Re: [PATCH v2 1/8] clk: imx: Align imx sc clock msg structs to 4
- Re: [PATCH v2 6/8] pinctrl: imx: scu: Align imx sc msg structs to 4
- [PATCH] rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()
- Re: [PATCH 1/2] rtc: sun6i: Make external 32k oscillator optional
- Re: [PATCH 1/2] rtc: sun6i: Make external 32k oscillator optional
- [PATCH v2 8/8] soc: imx-scu: Align imx sc msg structs to 4
- [PATCH v2 7/8] rtc: imx-sc: Align imx sc msg structs to 4
- [PATCH v2 6/8] pinctrl: imx: scu: Align imx sc msg structs to 4
- [PATCH v2 5/8] firmware: imx: Align imx_sc_msg_req_cpu_start to 4
- [PATCH v2 4/8] firmware: imx: scu-pd: Align imx sc msg structs to 4
- [PATCH v2 3/8] firmware: imx: misc: Align imx sc msg structs to 4
- [PATCH v2 2/8] clk: imx: Align imx sc clock parent msg structs to 4
- [PATCH v2 1/8] clk: imx: Align imx sc clock msg structs to 4
- [PATCH v2 0/8] firmware: imx: Align imx SC msg structs to 4
- Re: [PATCH] firmware: imx: Align imx SC msg structs to 4
- [PATCH] rtc: zynqmp: Add calibration set and get support
- Re: [PATCH] firmware: imx: Align imx SC msg structs to 4
- Re: [PATCH 4/9] efi: register EFI rtc platform device only when available
- [PATCH 4/9] efi: register EFI rtc platform device only when available
- Re: [PATCH] rtc: snvs: Remove unused include of of_device.h
- Re: [PATCH] firmware: imx: Align imx SC msg structs to 4
- Re: [PATCH] firmware: imx: Align imx SC msg structs to 4
- Re: [PATCH] firmware: imx: Align imx SC msg structs to 4
- Re: [PATCH] firmware: imx: Align imx SC msg structs to 4
- Re: [PATCH] firmware: imx: Align imx SC msg structs to 4
- Re: [PATCH] firmware: imx: Align imx SC msg structs to 4
- Re: [PATCH v8 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- [PATCH] rtc: snvs: Remove unused include of of_device.h
- [PATCH AUTOSEL 5.5 116/542] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- [PATCH AUTOSEL 5.5 252/542] rtc: hym8563: Return -EINVAL if the time is known to be invalid
- [PATCH AUTOSEL 5.4 219/459] rtc: hym8563: Return -EINVAL if the time is known to be invalid
- [PATCH AUTOSEL 4.19 116/252] rtc: hym8563: Return -EINVAL if the time is known to be invalid
- [PATCH AUTOSEL 4.14 089/186] rtc: hym8563: Return -EINVAL if the time is known to be invalid
- Re: [PATCH 1/2] rtc: sun6i: Make external 32k oscillator optional
- [PATCH AUTOSEL 4.9 071/141] rtc: hym8563: Return -EINVAL if the time is known to be invalid
- [PATCH AUTOSEL 4.4 052/100] rtc: hym8563: Return -EINVAL if the time is known to be invalid
- [PATCH AUTOSEL 5.4 100/459] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: [PATCH 1/2] rtc: sun6i: Make external 32k oscillator optional
- [PATCH 2/2] arm64: dts: allwinner: h6: Move ext. oscillator to board DTs
- [PATCH 0/2] rtc: sun6i: Make external oscillator optional
- [PATCH 1/2] rtc: sun6i: Make external 32k oscillator optional
- Re: [PATCH] rtc: sh: Restore devm_ioremap() alignment
- Re: [PATCH v2] rtc: zynqmp: Clear alarm interrupt status before interrupt enable
- Re: [PATCH v2] rtc: zynqmp: Clear alarm interrupt status before interrupt enable
- [PATCH v2] rtc: zynqmp: Clear alarm interrupt status before interrupt enable
- [PATCH] rtc: sh: Restore devm_ioremap() alignment
- [PATCH] firmware: imx: Align imx SC msg structs to 4
- Re: [PATCH] rtc: zynqmp: Clear alarm interrupt status before interrupt enable
- Re: [PATCH] rtc: zynqmp: Clear alarm interrupt status before interrupt enable
- Re: [PATCH v8 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- Re: [PATCH] rtc: zynqmp: Clear alarm interrupt status before interrupt enable
- Re: [PATCH v8 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- [PATCH v1 2/2] rtc: ds1307: add support for watchdog timer on ds1388
- [PATCH v1 1/2] rtc: ds1307: handle oscillator failure flags for ds1388 variant
- [PATCH v1 0/2] rtc: update ds1388 support
- Re: [PATCH v2 14/17] rtc: cros-ec: Use cros_ec_cmd()
- [PATCH v2 14/17] rtc: cros-ec: Use cros_ec_cmd()
- Re: [GIT PULL] RTC for 5.6
[Index of Archives]
[Linux Sound]
[ALSA Users]
[ALSA Devel]
[Linux Audio Users]
[Linux Media]
[Kernel]
[Gimp]
[Yosemite News]
[Linux Media]