Hi,
On 16/03/2020 12:41:28+0530, Mohit Aggarwal wrote:
> Currently, alarm register is not cleared on resume
> leading to reboot during power off charging mode.
>
> Change-Id: Ie2e6bbab8aa46e4e9b9cc984181ffab557cbbdae
No Change-Id upstream please.
> Signed-off-by: Mohit Aggarwal <maggarwa@xxxxxxxxxxxxxx>
> ---
> drivers/rtc/rtc-pm8xxx.c | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
> index bbe013f..96e7985 100644
> --- a/drivers/rtc/rtc-pm8xxx.c
> +++ b/drivers/rtc/rtc-pm8xxx.c
> @@ -1,5 +1,5 @@
> // SPDX-License-Identifier: GPL-2.0-only
> -/* Copyright (c) 2010-2011, 2019, The Linux Foundation. All rights reserved. */
> +/* Copyright (c) 2010-2011, 2019-2020, The Linux Foundation. All rights reserved. */
>
> #include <linux/of.h>
> #include <linux/module.h>
> @@ -301,6 +301,7 @@ static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
> struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
> const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
> unsigned int ctrl_reg;
> + u8 value[NUM_8_BIT_RTC_REGS] = {0};
>
> spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
>
> @@ -319,6 +320,16 @@ static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
> goto rtc_rw_fail;
> }
>
> + /* Clear Alarm register */
> + if (!enable) {
> + rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
> + sizeof(value));
This is not properly aligned.
> + if (rc) {
> + dev_err(dev, "Write to RTC ALARM register failed\n");
Is that error message necessary? What would be the user action after
seeing that in the logs? Will the logs actually be seen?
> + goto rtc_rw_fail;
> + }
> + }
> +
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
